Controls Systems Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the controls systems engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

L Ernser

Lilliana

Ernser

532 Luther Route

Los Angeles

+1 (555) 732 6882

532 Luther Route

Los Angeles

Phone

p +1 (555) 732 6882

Experience Experience

New York, NY

Controls Systems Engineer

New York, NY

Runolfsson LLC

New York, NY

Controls Systems Engineer

Work with IT, EU Controls Engineering and Operations Engineering to develop and update controls knowledge and training document for the Engineering team
Provide technical support and instruction to staff and/or customers regarding equipment standards, assisting with specific, difficult in-service engineering
Monitor MHE metrics and partner with facilities/operations for system performance issues and provide analysis across all SC's
Work with V&V engineers to develop test plans
Manages, coordinates and designs or assists in design of control related projects. Projects involve
Develops plans for future control work and associated computer systems, equipment and software based on economics and necessity
Monitors networks daily to ensure best performance

Chicago, IL

Automation Controls Systems Engineer

Chicago, IL

Zieme, Yundt and Carter

Chicago, IL

Automation Controls Systems Engineer

Serve as project/program manager of projects with a control system upgrade focus with responsibility for all phases of project development and execution. This includes responsibility for all layers of project scope from the instrument/device layer through data communication to data archive and HMI
Support project manager in project planning and execution from inception to completion
Support project manager with project approval, control system & instrument engineering design review, procurement, construction, and be on site for commissioning/startup
Support management of contract control system & instrumentation engineering services
Support the management of contract engineering services
Mentoring of Asset team Facilities Engineers
Oversee/prepare comprehensive construction work packages by organizing the detailed design information and documents in order to release projects for construction

present

Phoenix, AZ

Senior Controls Systems Engineer

Phoenix, AZ

Parker and Sons

present

Phoenix, AZ

Senior Controls Systems Engineer

present

Performs presentations of complex technical findings and developments
Completes estimates for complex modules under development, and estimates own work
Completes recommendations for ideas related to productivity improvement, cost reduction and improvement in customer satisfaction
Enjoys working in a team environment
Knowledge of engine and powertrain management systems
Keep abreast of emerging industry trends in the field of commercial vehicle E/E systems, network architecture and technology
Network design using Profinet, Profibus, ASI Bus, ControlNet, DeviceNet, Ethernet/IP

Education Education

Bachelor’s Degree in Electrical Engineering

Oregon State University

Bachelor’s Degree in Electrical Engineering

Skills Skills

Control Systems Theory: Closed Loop controls, Controllability and Stability analysis
Demonstrated knowledge and experience of
Working knowledge of extrusion, LVT, hard flooring, or textile manufacturing processes
Capable of following, understanding and developing improvement strategies within PLC ladder code
Visual Basic programming (advance HMI configuration)
Provide detailed analysis and testing of existing and new engineering solutions and components
Work with IT, EU Controls Engineering and Operations Engineering to develop and update controls knowledge and training document for the Engineering team
Professional Engineer
Experience with variable speed drives, valves, and instrumentation used for chemical or industrial plant production process
Provide technical documentation such as flow diagrams, conveyor and equipment layouts, installation details, schedules and budgets

Create a Resume in Minutes

15 Controls Systems Engineer resume templates

Read our complete resume writing guides

Controls Systems Engineer Resume Examples & Samples

Work with engineering design team to create PLC
Bachelor's Degree of Science in Electrical or Mechanical Engineering or similar discipline
Ability to support travel for controls verification (up to 15%)
Entry level position – aptitude and desire to learn
Self-starter with positive attitude, ability to work individually and in teams
Demonstrated ability to meet goals and objectives
Clear verbal and written communication, logical reasoning skills
Working knowledge of power plant or industrial control systems
Working knowledge and experience with GE control system software, including Control System Toolbox, Cimplicity HMI, and Predix platform
Working knowledge of dynamic simulation packages such as Easy5, Matlab/Simulink, or HYSYS
Comfortable working in a global environment

Process Instrumentation & Controls Systems Engineer Resume Examples & Samples

Providing daily process instrumentation and control support for waste disposal operations to meet safety, environmental and productivity objectives
Monitoring and optimizing control system operation through system log files, operator screens, historical data, and trend data
Tracking and analyzing data to identify issues and provide guidance to improve waste disposal operations
Maintaining back-ups for computer systems, PLC programs, Wonderware code and HMI screens, monthly tape back-up for strawman (unix machine)
Modifying and creating programs for PLCs, Wonderware functions and HMI screens for projects
Creation of a renewal plan for upgrade of equipment and software interfaces
Initiating and leading projects to improve safety and environmental performance, improve waste disposal efficiency, reduce cost, and improve equipment reliability and uptime
Use Lean Six Sigma tools where applicable to drive improvement projects with sustainable results
Leading and participating in safety and environmental reviews (incident investigations, Process Hazard Analysis, Pre-startup Safety Reviews, Management of Change Reviews)
Working with cross functional teams within the Incinerator and across 3M
Process engineering responsibilities as needed
Associate degree or two year technical degree or higher from an accredited university
Minimum of five (5) years combined facilities, electrical and/or control systems engineering experience
Bachelor’s degree or higher in Engineering, Electrical Engineering, Instrumentation or Control Systems Engineering from an accredited university
Experience working with systems software in a process control environment
Experience in a manufacturing environment
Experience working with Wonderware Archestra, InSql, and Wonderware InTouch HMI Application
Experience with Computer Security Systems and Ethernet Networking
Familiarity with industrial equipment control systems
Experience with Excel spreadsheet Macro development/support
Knowledge of PI&CS supported software platforms and applications
Experience managing outside contract project work
Ability to work on a cross functional team within a manufacturing organization

Automation Controls Systems Engineer Resume Examples & Samples

Extensive knowledge of control system documentation including Control Philosophy and Cause & Effects development
Extensive knowledge of electrical engineering and electric code related to control system voltages
Extensive knowledge of process control instrumentation design and specifications, and instrument list and data sheet development
Extensive knowledge of PLC programming, HMI integration, and SCADA
Extensive knowledge of data communication protocols
Extensive knowledge of DCS integration
Extensive knowledge of data archive software (ie OSI PI)
Extensive knowledge of MOCs, HAZOPs and PSSRs
Knowledge of Ethernet and other networks used in automation
Knowledge of protective instrumented systems
Knowledge of project management principles including estimating, scheduling, and implementation
Familiar with SmartPlant Instrumentation (InTools)
Basic knowledge of chemicals, pipelines, rotating equipment, surface equipment, used in oil and gas production
Knowledge of SFRM principles
10+ years in oilfield automation including wellhead automation is desired
Experience in instrument design
Experience with PLC and DCS programming and HMI configuration
Experience with planning automation networks
Expert level of understanding of automation and electrical design principles
Understanding of PSSRs and MOCs
Extensive expertise in EOR safe work systems
Extensive expertise of Electrical / Automation construction codes and practices
Extensive knowledge of material specifications and application
Ability to manage large Budget
Strong Leadership and Mentoring skills
Ability to perform under pressure
Excellent Communication skills
Knowledge of operations and reservoirs
Strong understanding of economic and financial analysis
Networking ability
Creativity and innovation
Adapts to change and ambiguity
Demonstrated success with organizations with multi-discipline staffs
Understands business process and regulatory requirements
Strong emphasis on customer service

Senior Controls Systems Engineer Resume Examples & Samples

Design, rapid prototype, test, and document advanced vehicle and powertrain control concepts
Develop control architectures for future vehicles
Create prototype controls for evaluating advanced technologies
Advise and collect feedback from truck division product planning and engineering departments
Coordinate with cross-divisional counterparts on global technology roadmaps
Create high-level system and software requirements for advanced concepts selected for implementation
MS or PhD in appropriate technical field and 5 years of relevant technical work experience
In-depth knowledge of software development in a Matlab/Simulink Model-Based Design environment
Knowledge of engine and powertrain management systems
Knowledge of heavy duty vehicle control systems
Knowledge of Advanced Driver Assistance systems desired
Understanding of automotive Class 8 communication protocols (CAN/J1939, LIN, KWP-2000, UDS)
Knowledge of GPS and V2X communication systems desired
Proficiency using Requirements Management tools and Systems Engineering tools desired
Enjoys working in a team environment

Controls Systems Engineer Resume Examples & Samples

Ensure that all proposed changes are documented and controlled using the established change management process
Capable of following, understanding and developing improvement strategies within PLC ladder code
Experienced and familiar with Siemens and/or Allen Bradley PLC controlled automation in a continuous process or production environment
Work with IT, EU Controls Engineering and Operations Engineering to develop and update controls knowledge and training document for the Engineering team
Undertake industrial engineering design and improvement projects on existing material handling modules
Actively participate in local or network level controls projects and initiatives
Ensure adherence to all Health & Safety procedures. Be proactive in the raising of potential H&S issues and the development of personal safety awareness
Use AutoCAD to review, develop and maintain electrical schematic and conveyor layout drawings
Fully understand and ensure procedural adherence to industry operating standards
Apprentice trained multi-skilled background
Control systems experience in PLC based systems
Microsoft Office, SolidWorks or Visio or AutoCAD work experience on control layout design and schematic
A team player who is willing to roll up the sleeves
Ability to operate in an open organizational structure
Self-motivated and customer-centric
Knowledge of Six Sigma, analytical and process improvement techniques
An electrical or mechanical training degree or BS/BEng degree in Computer Science, Mechanical Engineering, Electrical Engineering, or related fields
Advanced industrial engineering, project management and implementation experience
Knowledge of at least one other EU language desirable (especially French or German, Polish and Spanish)

Controls Systems Engineer Resume Examples & Samples

Facilitate rigorous process discipline for both traditional and Agile development
Demonstrate knowledge of the principles of Systems Engineering as defined by INCOSE
Has excellent communications skills including demonstrated ability to effectively present information/status to senior management team, customers, project-team members, vendors and cross-functional stakeholders of the product development process
Has high attention to detail and strong organizational skills, including engineering knowledge capture, transfer, presentation, and dissemination during and after a project completion
Demonstrate ability to cope with stress and maintain a pleasant and cooperative temperament with internal and external customers
Demonstrate ability to perform mental tasks such as making decisions, learning, thinking rationally and exercising good judgment
Bachelor's Degree in Electrical, Computer or Software Engineering or Computer Science and at least 5 years electrical/software controls product development experience is required
HVAC control and systems industry preferred
5 years minimum of web browser based development experience
3 years minimum experience in microcomputer software design for embedded controls required

Electronic Controls Systems Engineer Resume Examples & Samples

BS or MS Degree in Electrical, Mechanical Engineering or equivalent with 5 year experience in related field/industry
Strong people skills and effective written/verbal communication skills (including presentation) are essential
Solid background in controls/embedded systems, datalinks, electronic circuits and hardware (i.e sensors, actuators)
Knowledge of Calibration Tools (Calterm, CalbertNG), MATLAB and Simulink are required
Bachelor of Science (or equivalent degree) in Engineering required

Controls Systems Engineer Resume Examples & Samples

Manages, coordinates and designs or assists in design of control related projects. Projects involve
1) Specification, purchase and maintenance of various systems, computers, networking and/or peripheral equipment
2) Design of controls or approval of contractor's design
3) Coordination with instrumentation engineers on instrument hardware and configuration required for control and commissioning of refinery controls
4) Coordination with operators on control design and implementation
Manages projects to control budget and schedule as planned
Specifies instrumentation and PLC’s or selects vendors to provide the best solution to a problem or project
Develops plans for future control work and associated computer systems, equipment and software based on economics and necessity
Stays abreast of technology in control and computer hardware/software to effectively plan for future projects and upgrade of equipment
Responsible for updating program changes in computer software to support field instrument modifications/additives
Designs control systems and process systems to ensure safe and effective operation
Maintains existing supervisory controls to keep controls in operation and configured or tuned optimally for unit configuration or dynamic changes
Designs and maintains operator interface to computer supervisory controls
Evaluates feasibility and recommends changes to process control design to improve unit operation or as required for advanced control projects
Specifies and designs control systems to enhance unit operation or to solve unit problems, including hardware and software
Monitors networks daily to ensure best performance
Ensures computers are operating efficiently, are secure, and are maintained
Maintains confidentiality when working with sensitive information, results, and communications
Knowledge of DCS, PLCs/SISs, HMIs, Microsoft Operating Systems, and/or computer network architecture
Knowledge of field instrumentation and analyzers
Experience with ISA regulatory guidelines
Knowledge of Honeywell Experion, APACS, RTP, Triconex, and/or Allen Bradley PLCs is preferred
Capable of demonstrating the necessary leadership skills that will make this individual successful in this role
Ability to set priorities and manage multiple tasks in a fast paced environment
Effective team skills and ability to work with all levels of the organization

Controls Systems Engineer Resume Examples & Samples

Implementation, development, troubleshooting and improvement of the controls systems, primarily InBatch, in the PTC
Train Pilot Plant technicians and scientists on system utilization
Input formulas into InBatch needed for day to day runs
Define maintenance procedures and troubleshooting guidelines that can be applied globally
Design, specification, installation, start up, troubleshooting, and improvement of process control systems, plant floor systems, business systems, and equipment
Develop and implement process improvements (reliability, waste, product quality, safety, cost) to meet business needs
Review and conduct sensor instrumentation specifications and calibrations
Perform controls system validation upon commissioning of new systems and processes
Integrate SAP and Wonderware systems
Is first point of contact to troubleshoot electrical and controls systems
Follows all cGMP, EOHS, and Quality guidelines
BS Engineering or related field
Knowledge of production processes and control systems
Demonstrated knowledge and experience of

Controls Systems Engineer Resume Examples & Samples

Bachelor’s Degree in Electrical or Mechanical Engineering is required
A previous design internship within the control systems field is preferred
EIT certification is required
Basic knowledge of Programmable Logic Controllers (PLC) hardware and software as well as Supervisory Control and Data Acquisition (SCADA) software is preferred
Proficiency with design software (AutoCAD and Revit) is required
Knowledge of basic engineering principles and prescribed methods
Ability to efficiently utilize time in executing assigned tasks accurately and on time
25% travel is required
Night work is often required for critical systems

Controls Systems Engineer Resume Examples & Samples

Design electronic components, develop firmware, and control systems for AERCO products
Provide technical support and instruction to staff and/or customers regarding equipment standards, assisting with specific, difficult in-service engineering
Operate computer-assisted engineering and design software and equipment to perform engineering tasks
Analyze system requirements, capacity, cost, and customer needs to determine feasibility of project and develop system plan
Confer with engineers, customers, vendors or others to discuss existing and potential engineering projects or products
Review and evaluate work of others, inside and outside the organization, to ensure effectiveness, technical adequacy and compatibility in the resolution of complex engineering problems
Determine material and equipment needs. Inspect electronic equipment, instruments, products, and systems to ensure conformance to specifications, safety standards, and applicable codes and regulations
Evaluate operational systems, prototypes and proposals and recommend repair or design modifications, based on factors such as environment, service, cost, and system capabilities
Prepare documentation containing information such as confidential descriptions and specifications of proprietary hardware and software, product development and introduction schedules, product costs, and information about product performance weaknesses
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily
The requirements listed below are representative of the knowledge, skills and or abilities required
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions
Ability to write, debug, flash, and interface complex microprocessor code in C/C++ with physical analog and digital I/O
Excellent knowledge of embedded technologies and state machines
Excellent knowledge of internet protocols including the related security technologies
Complete understanding of web technologies and web programming languages
Able to follow schematic design and layout
Excellent interpersonal, communications and presentation skills
Well-developed organizational skills
Ability to manage multiple priorities. Must excel in a team environment
Must embrace change. In-depth knowledge of PC operating systems, applications, and CAD design software
BSEE required, MSEE a plus
Minimum of 5 years working with microprocessor-based controls (hardware and software) along with past exposure to interfacing unit operation with building automation systems
While performing duties of the job, employee is required to sit; stand; walk; use hands to handle objects, tools, or controls; reach with hands and arms; talk and hear
Employee will occasionally lift and/or move up to 40 pounds
Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus
Office environment with occasional shop floor working environment
Noise level is minimal. Required to wear safety glasses and utilize other safety equipment as required while present on the shop floor

Powertrain Controls Systems Engineer Resume Examples & Samples

Lead powertrain control systems engineering including control modules, sensors, actuators, motors, low-level, and functional level software for Polaris 4-stroke powertrains
Lead powertrain control system software specifications and planning with strategic supplier partners
Lead SFMEA for powertrain control system including hardware, electrical sensors/actuators/harness, and software
Participate in powertrain control system software meetings. Understand powertrain control system architecture and recommend / validate calibration, software, and hardware changes
Participate in vehicle group development processes to ensure that powertrain control system metrics, applicable limits, test procedures, certification requirements, are achieved
Recommend control system improvements to meet vehicle performance, reliability, quality, and cost targets
Participate in root cause failure analysis during the development process. Find and recommend practical solutions for specific failure modes as related to calibration parameters, or calibration related vehicle performance
Create, maintain, and present technical reports for powertrain control system performance
Responsible for data integrity and all technical aspects of the development and validation process
Provide direct calibration support as needed for the vehicle leads
Support diagnostic system development including service tools, guided diagnostics
Support the service team to resolve field issues as required
Ability to mentor younger development engineers new to the powertrain controls activity
Interact and direct resources at multiple Powertrain and product group engineering sites. This includes the ability to travel up to 25% of time
BS or MS engineering degree and a minimum of 5 years of powertrain development related experience
Extensive experience with vehicle controllers, sensors, actuators, software, diagnostic tools, and vehicle CAN
Knowledge of Otto and Diesel engine cycles and vehicle powertrain control systems
Systems engineering experience including FMEA, HARA, DVP&R
ISO26262 and ASIL/MSIL experience a plus
Experience with development tools ETAS/INCA, ATI/Vision, Simulink, ASCET, Concerto, Excel, Matlab, etc
Experience operating ATVs, off-road vehicles and motorcycles preferred
Hands-on experience repairing / rebuilding engines and vehicle electrical systems

Senior Controls Systems Engineer Resume Examples & Samples

Serves in leadership capacity for development of systems requirements including system performance, system interfaces, architecture, and algorithms
Develops algorithms and conveys algorithm requirements to software teams
Works closely with design engineering teams to convey control system requirements for hardware designs
Develops monitors and limiters in consideration of system safety
Understands and considers design assurance levels in the control system design
Develops control system requirements documents
Develops and documents system interface in ICD format
Provides primary customer interface to peers at OEM customers and supports their analysis activities as necessary
Experience using MatLab or Simulink design tools
Fluency and understanding of C programming language
Demonstrates understanding of system architectures and the effects on the control system
Demonstrated strong and effective verbal, written and interpersonal communication skills

Entry Level Controls Systems Engineer Resume Examples & Samples

Evaluates the desired goal of the system and develops, designs, or selects the required instrumentation, control system hardware, power controls, software, to achieve the goal
Performs calculations and evaluations in the design of Control Systems for industrial and commercial applications
May direct and coordinate operation, maintenance, and repair of equipment and systems in field installations
Will use computer-assisted engineering and design software and equipment to perform engineering task
Researches, develops, designs, and tests a variety of equipment, facilities, components, products, and systems for commercial and industrial purposes
BS or MS in an engineering discipline (Chemical, Electrical, or Mechanical Engineering) is required
Excellent oral and written communication skills required
Advanced MS Office skills (Word, Excel, PowerPoint, Access) preferred
This position requires that all applicants be familiar with basic engineering concepts and design. A willingness to participate in fast paced, high quality and highly integrated projects is required. An interest in Control Systems Engineering is also required

Controls Systems Engineer Resume Examples & Samples

Bachelor Degree in Engineering, Instrumentation, Controls, Computer Science or similar degree
5+ years relevant experience to include recent controls systems software development
Experience with large systems with over 1,000 IO points
Experience working in chemical plants
Professional Engineer
7+ years relevant experience

Senior Controls Systems Engineer Resume Examples & Samples

The Senior Controls Systems Engineer will work as part of a multi-discipline team to perform complex design, development, maintenance, enhancement, testing, and support of Material Handling Automation Equipment
Completes the design of complex systems that integrate hardware and software
Performs reviews of complex customers' standards specification and other documentation to determine system requirements
Completes recommendations for ideas related to productivity improvement, cost reduction and improvement in customer satisfaction
Performs presentations of complex technical findings and developments
Completes the software quality process through the execution of complex module, subsystem and system test procedures
Bachelor’s degree in Electrical Engineering, or equivalent combination of education and experience. Certification may be required in some areas
8 years of successful experience in related field and successful demonstration of Knowledge and Responsibilities
Current experience with Allen-Bradley PLC languages, architecture and networks. Other platforms a plus
Electrical schematic and panel design (Control Panels, Motor Control Panels, Motor Control Centers, Power Distribution) using AutoCAD Electrical
Network design using Profinet, Profibus, ASI Bus, ControlNet, DeviceNet, Ethernet/IP
Human-Machine Interface programming
Experience with conveyor systems (Parcel, Baggage, ASRS, Etc.), large machine design, and/or motor control desired
Strong ability to document technical decisions with illustrations and clear verbal explanations

Controls Systems Engineer Resume Examples & Samples

Stay up to date with innovative technology differentiating between hype and true value with the technical knowledge to operationalize
Support multiple HMI systems: (Wonderware, GE iFix, FactoryTalk View)
Share best practices and standards across the Manufacturing IT community
Deliver site level support for HMI systems
Provide “fast response” support to remote manufacturing sites. (Remotely or travel onsite)
Travel, approx. 50%, to participate in field work at manufacturing sites (hands on PLC, HMI, and IT infrastructure)
Assist implementing process control security processes
Provide consultation to various capabilities on control system architecture, security polices, best practices, and configuration guidelines to “harden” manufacturing hardware and software
Provide guidance concerning corporate manufacturing applications
Stay informed with current architecture challenges and technologies
Work independently or as part of a team on large-scale projects at remote sites
At least 3 years of experience working with process control systems
Experience developing/commissioning Rockwell ControlLogix/Compact® Logix PLC’s
Development of Wonderware, GE iFix, or FactoryTalk View Client/Server SCADA systems
Willing to travel up to 50% of the time and be located near major airport
Bachelor's degree or higher within Engineering, Information Technology, or closely related field
System integration from concept to production
Working knowledge of IT technology (I.E.- Firewalls, Server OS’s, Client OS’s, networking, patching, anti-virus)
Experience working in a consultative and cooperative manner with multiple stakeholders, such as corporate security, corporate engineering, site process control engineers, and IT resources

Controls Systems Engineer Resume Examples & Samples

Design and program automation solutions based on Allen-Bradley and/or Siemens PLC platform
Design and develop Human Machine Interfaces with Allen-Bradley’s RSView and/or Siemens WinCC
Consult with the business to convey cost, features, and risks of in house and third party control systems
Participate in the development of control system projects, including formulating objectives, defining functional requirements and specifications, obtaining quotes, estimating man-hours, generating bid packages, etc
Troubleshoot complex control system problems in a real-time manufacturing environment
Design, set up, and conduct control system staging prior to deployment
Manage contractors, technical resources, and plant resources
Resolve design gap issues at time of deployment
Initiate Action
Influence Others
Execute Action Plan
Visual Basic programming (advance HMI configuration)
Programming of other PLC (vendors)
OPC configuration
Working knowledge of extrusion, LVT, hard flooring, or textile manufacturing processes

Controls Systems Engineer Resume Examples & Samples

Monitor MHE metrics and partner with facilities/operations for system performance issues and provide analysis across all SC's
Facilitate Failure Analysis and Incident Review processes and implement process improvements or retraining to avoid future incidents
Perform, Utilize, and provide analysis SC System Assessments to assess material handling system performance
Bachelor’s degree in Electrical Engineering or related field or 2+ years controls experience within Amazon
4+ years of electrical and automation controls experience
Ability to lead others in a technical role and interact with all levels of management
Ability to identify, maintain, troubleshoot, and fully program AB RS LOGIX 5000 PLC's and PLC components
Ability to identify, maintain, troubleshoot, and fully program Robotics system components and controls
Ability to identify, maintain, troubleshoot, fully program, and design HMI components
Ability to identify, maintain, troubleshoot, and fully program control network components
Ability to identify, maintain, troubleshoot, and modify Motor Controls including motor starters, Variable Frequency Drives, DC drives, and standard electrical components
Industrial electrical hands-on experience and troubleshooting, including 480V 3-phase, 110 VAC, and 24VDC systems
Understand Warehouse Management System Software Concepts and messaging protocols
Understand Warehouse control systems concepts and messaging protocols
Ability to interpret, modify, and develop drawings both mechanical and electrical
Ability to identify, maintain, and utilize SCADA systems and KPI's
Ability to train others with lesser skills
Ability to access all levels and areas of the facility
Ability to interpret and understand policies and procedures and relate them to others
Bachelor’s degree in Electrical Engineering or equivalent experience
Systems controls design or programming experience
Systems integration experience
Field service engineering experience
Systems trainer or training experience
Experience supporting a wide range of different conveyors and sortation systems
Proven history of remote technical phone support
Experience with advanced automation controls systems
Experience with industrial robotics
Experience with ASRS systems

Principal Controls Systems Engineer Resume Examples & Samples

May consider equivalent experience in lieu of a degree
Expertise in developing software for Siemens PCS7 control systems
8+ years relevant experience to include recent controls systems software development
Experience with variable speed drives, valves, and instrumentation used for chemical or industrial plant production process
Design and construction experience a plus

Displays & Controls Systems Engineer Resume Examples & Samples

Operational requirements analysis and avionics systems architecture definition
Specification of functional and software requirements for avionics systems
Generation and maintenance of the design documentation (e.g. interface control documents, requirements documents, test protocols, etc.)
Generation of avionics systems specifications
Equipment engineering tasks (manufacturer monitoring, qualification monitoring, etc.)
Integration, validation and verification of avionics systems
Contribution to Safety analysis and to the Certification and Qualification processes
Support to Services

Rxo-controls / Systems Engineer Resume Examples & Samples

Designs, characterizes, documents, and implements manufacturing process improvement initiatives including: process experimentation, design, optimization, control, specification, and sustainment to achieve continuous improvement to yields and cost initiatives
Leads lean manufacturing initiatives to improve safety, reduce cycle times, improve productivity, improve process reliability, and improve customer satisfaction with respect to on-time delivery and quality
Performs process capability analysis and implements process control procedures
Creates appropriate process documentation and training tools
Monitors and controls production processes to ensure compliance to specified requirements
Provides technical support for the qualification and validation of new product introductions to ensure all aspects of performance, manufacturability and quality are achieved
Develops and manages timelines, assesses technical feasibility of project options, and executes implementation plans
Provides technical support for the qualification and validation of new equipment and processes; and identifies and implements new technologies to continuously improve processes
Leads or supports root cause analysis investigations and recommends corrective actions and preventative actions
Provides technical input to support process changes
Supports training of operations personnel
Conducts investigations and tests pertaining to the development of new manufacturing methods, materials or processes, and investigates possible applications of results
BS Engineering
Interpersonal skills
Knowledge of manufacturing engineering
MS Excel
Ability to travel an average of 15% to 25% - project requirements may dictate higher intervals
5+ years of engineering experience
Statistical Analysis (MiniTAB, Lean Manufacturing, six sigma, project management)

Hvac Controls Systems Engineer Resume Examples & Samples

Facilitates rigorous process discipline for both Traditional and Agile development
Demonstrates knowledge of the principles of Systems Engineering, as defined by INCOSE
Has ability to manage time well and prioritize efforts under the pressure of time constraints
Has ability to work in a team environment and collaborate with teams in multiple locations, work to gain consensus on cross product issues
Minimum Education: Four-year BS degree in Mechanical/Electrical/Computer/Software Engineering, Computer Science, or equivalent degree
5 years minimum of electrical/software controls product development experience
5 years minimum of HVAC equipment, controls and systems experience. Field installation and commissioning experience preferred

Download Controls Systems Engineer Resume Sample as Image file