Controls Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the controls technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

P Reynolds

Providenci

Reynolds

469 Bartoletti Roads

Philadelphia

+1 (555) 309 3562

469 Bartoletti Roads

Philadelphia

Phone

p +1 (555) 309 3562

Experience Experience

Philadelphia, PA

Controls Technician

Philadelphia, PA

Wilderman-Olson

Philadelphia, PA

Controls Technician

Adhere to established procedures, perform self-checking and pay attention to detail in the performance of your work
Works with Control Systems Engineer to establish, review, improve and execute plant control system standards including PM tasks
Perform mechanical and electrical preventative maintenance on various manufacturing equipment, PLCs, control networks, admin networks, and electrical system
Accurately records/documents detailed information regarding work performed in our work order database
Develop and implement machine upgrades and improvements working with both internal and external resources (vendors, contractors, corporate)
Create and develop work instructions and deliver training to end users
Accurately estimate timeframe to complete assigned project work once scope of work is adequately defined and then complete work to agreed-to timeline

Phoenix, AZ

Project Controls Technician

Phoenix, AZ

Pagac, Wisoky and Little

Phoenix, AZ

Project Controls Technician

Assist the Project Manager with developing Estimate to Complete Cost and Revenues
Assist Project Managers and in the overall project management of a range of large and small water and wastewater engineering projects from start to finish
Assisting the Project Manager with developing Estimate to Complete costs and revenues
Assist in the identification of change conditions ad the development of Change Order requests documents and estimates
Developing and maintaining project variance and earned value reporting and highlighting exceptions to the project manager
Assist in the identification of change conditions and the development of Change Order requests documents and estimates
Manage subcontractor’s involvement in the projects. Coordinate contracts, budgets, commitments, expenditures, invoices and performance

present

Boston, MA

Maintenance Controls Technician

Boston, MA

Rutherford, Reynolds and Konopelski

present

Boston, MA

Maintenance Controls Technician

present

Work to constantly improve the Plant through cost-saving ideas, process improvements, and business simplification ideas
Repair of production equipment from basic hydraulic equipment to complex CNC machinery, performing both electrical and mechanical work
Assist in all maintenance and repair work in either the plant or on the grounds
Communicating accurately, concisely, and professionally with your customer as to important repair steps taken, parts ordered, and time estimated until completion
Repairing critical equipment, performing preventive and predictive maintenance, and completing projects such as mechanical and electrical hardware and software upgrades
Troubleshoot programming failures and makes adjustments and document as necessary
Using our Computerized Maintenance Management System (CMMS), you receive work orders, identify faulty equipment, and acquire parts and equipment to complete repairs

Education Education

Bachelor’s Degree in Electronics

New York University

Bachelor’s Degree in Electronics

Skills Skills

Knowledgeable in applicable national and international electrical and robotic design and safety codes
Proactive, resourceful & highly motivated with good communication skills and ability to work in high output environment
Maintains good interpersonal skills and develops good working relationships with peers and all levels of management
Presentation skills highly desirable
Strong operational knowledge of manufacturing processes & equipment
Ability to work in a team based environment and participate on a highly matrixed team
Strong knowledge of integrating equipment components into a working manufacturing line
Posses a good understanding of the Tenneco Quality System and TS-16949 & ISO 2001 regulations
Basic knowledge of AUTOCAD
Understanding of networks including Ethernet, Devicenet, ProfiBus and/or ProfiNet

Create a Resume in Minutes

15 Controls Technician resume templates

Read our complete resume writing guides

Controls Technician Resume Examples & Samples

Extensive knowledge of powered conveyor and/or industrial equipment
Experience with 120vac, 208vac, 480vac
Ability to troubleshoot and perform diagnostic checks on equipment control system(s)
Able to read electrical prints
Familiar with MS Server 20XX, MS SQL database
Solid understanding of RS Logix 5, 500, 5000
Solid understanding of RS Linx
Familiar with Building Automation System(s) hardware/software. ***Delta Control experience a plus
Experience with Web Based HMI development, Iconics development experience is a plus
*Experience with CCTV and access controls systems is a plus
Experience documenting projects in detail, including but not limited to create and/or modify Sequence of operation, Controls drawings (AutoCad)…
Document: repairs, parts used and, time completing tasks using CMMS data base
Ability to identify the root cause reoccurring issue and develop/implement resolution
Familiar with lock out/tag out procedures
Solid understand and experience with OPC and BacNet

Controls Technician Resume Examples & Samples

Maintains and upgrades PLC software: assist in training of staff on electronic equipment
Analyses, records and charts documentation required for maintenance records and projects
Deals extensively with vendors (both parts suppliers and equipment suppliers)
Carries out preventative maintenance procedures as laid out by the manufacturer’s specifications
Prepares drawings, materials specifications to requisition as required by vendors or other departments
Able to understand and CSA-462 and/or NEMA 70-E
Commitment to continuous improvement and work place safety
TS16949 awareness and adherence
Lean Manufacturing and 5S concepts awareness and adherence
College diploma in industrial/electrical controls
Proven of record of PLC programming (Allen Bradley, Siemens) or CNC controls (Fanuc, Siemens)
3 years experience with electronic control systems in a robotic welding or laser field or on CNC machine tools

Controls Technician Resume Examples & Samples

Design and integrate new automated work cells
Electrical design
Build, service, maintain, repair, install and test new or existing common controls and sensors including PLC’s, press controls and robotic systems
Troubleshoot and repair I/O logic circuits and devices, including mechanical, infrared, laser, and inductive sensors, hydraulic systems
Build, troubleshoot, and repair electrical panels utilizing relay and programmable logic circuitry
Write advanced programs for PLC logic and/or robot controllers and make modifications as the process requires
Maintain safety standards of equipment and work area and perform all duties in a safe manner in accordance with the safety policies of Promatek
Ensure that the delivery on all projects is to the appropriate levels of quality, engineering level, on time and within the budget
Carry out preventative maintenance activities
Coordinate activities of apprentices, helpers and assigned contractors
Perform related mechanical/electrical duties as required
Assist with the preparation of quotations and job costing
Prepare and maintain applicable documentation
Must be certified tradesman or completion of a specialized course from a community or recognized college consisting of more than two years
Skills gained from a minimum of 5 years of experience in applicable automotive production
Background in troubleshooting and programming PLC’s, preferably in an automotive environment
Familiar with the Ontario Electrical Code
Excellent organizational, interpersonal, communication and problem solving skills
Able to be flexible in hours of work in order to meet internal/external customer requirements (scheduled and non-scheduled overtime, etc.)
Valid passport and driver’s license
Familiarity with Cosma parts and manufacturing processes
Understand, promote and work by Promatek’s vision statement
Travel may be required occasionally

Controls Technician Resume Examples & Samples

PLC programming and maintenance to support production
Instrumentation Specification/procurement and interfacing
Design and implement machine control software and programs for automation system projects to meet Quality, Manufacturing Engineering, and/or Customer requirements. (eg. PLC, HMI, analog/measurement systems and signature analysis, motion control and vision systems, RFID, Scanners, PLC interfacing with SQL database using OPC)
Interfacing with suppliers and contractors on a technical level to ensure program goals are met
Takes Direction from Team Lead on priority of tasks
Ensure safety by work in accordance with the Ontario Hydro Electrical Code and CSA-Z432 safety standard
Creation and maintenance of technical documents, document all electrical changes to machinery
Procurement of spare components. Able to provide justification for ordered spares
Performs PM inspections as required
As per customer requirements and business demands
Electrical/Electronic/Mechatronic or similar Engineering degree/diploma/certificate or Trades Qualification and significant equivalent work experience
Proficient knowledge in the following software packages: Allen Bradley RSLogix5,500,5000, Factory Talk View Studio, Allen Bradley Panel Builder32, Omron CX-Programmer, Omron NT-series Support Tool
Knowledge of industrial networks. (DeviceNet, EthernetIP)
Knowledge of machine safety circuits and applications. (ABB Jokab)
Considerable knowledge of the use of electrical devices (i.e. proximity switches, load cells, LVDT’s, signal conditioners, etc.)
Knowledge of welding and welding processes
Demonstrated experience in the following: Electrical control system design, PLC programming and troubleshooting, Robot programming and troubleshooting, Strong MS Office skills, willing to work overtime as per job requirements
Previous experience and exposure to robotics (ABB, Motoman)
Understand and apply basic ladder logic principles, including sequencer and analog control for I/O, ability to understand high-end PLC commands and HMI usage
Servo Motion Programming (AB, Omron, Tox)
Familiar with Vision Systems (Keyence, Cognex, Omron)
Excellent communication skills both written and oral

Controls Technician Resume Examples & Samples

Direct manufacturing line support
Troubleshooting of equipment and process problems to complete quality improvements as required
Services, maintains, repairs, installs and tests equipment in accordance with current machine specifications
PLC/HMI programming and maintenance to support production
Reteach and troubleshooting of robotic material handlers and weld cells
Ability to create and modify electrical drawings, process & instrumentation diagrams and schematics when required
Procurement of spare components as well as provide justification for ordering spares
Interfacing with suppliers and contractors on a technical level when required for the purpose of troubleshooting and debug
Ensure safety by working in accordance with the Ontario Hydro Electrical Code and CSA-Z432 safety standard
Assist with mechanical repairs as needed
Takes direction from Maintenance Supervisor and Team Lead on priority of tasks
C.I. to assembly equipment as directed
Improves PMS when diagnosed through breakdowns or Continuous Improvement
Electrical/Electronic/Mechatronic Technician or similar Engineering degree/diploma/certificate or Trades Qualification and significant equivalent work experience
Knowledge in the following software packages: Allen Bradley RSlogix 500, 5000, Factory Talk View Studio, Allen Bradley Panel Builder32, Omron CX-Programmer, Omron NT-series Support Tool
Knowledge of and ability to troubleshoot industrial networks (DeviceNet, EthernetIP)
Knowledge of and ability to troubleshoot machine safety circuits and applications (ABB Jokab)
Understanding of VFD, DC and Servo Drive systems
Understanding of Data Tracking and the use of Barcod Scanners or RFID
Demonstrated experience in the following: PLC/HMI programming and troubleshooting, Robot programming and troubleshooting, Strong MS Office skills
Ability to read and understand technical documents, schematic design specification, update drawings as required
Understanding of welding and welding processes
Wiring and panel building experience
Willing and able to work overtime as per job requirements

Controls Technician Resume Examples & Samples

Conveyor preventative maintenance
Ability to perform electrical PM's in a safe yet timely manner
Recognize potential issues and concerns found during PM's and determine if repairs are needed immediately or if they can be decided upon and implemented at a later time
Mechanical assistance when required
Able to com come in outside of normally scheduled hours to complete repairs
Willing to work in other areas as needed

Controls Technician Resume Examples & Samples

Essential: Installs, maintains, troubleshoots and repairs complex electro-mechanical equipment, programmable logic controllers and machinery
Ensure ride system safety, show quality, operation and compliance of all rides, shows and effects in the park
Respond and resolve maintenance issues that affect show quality of all characters, effects, and ride vehicles in a timely manner. Ensure the work is performed correctly and follows all approved procedures
Communicate accurately and in a timely manner, matters which pertain to the operational status/readiness of all attractions and show venues to the Gang Boss and/or Foreman
Support requests of all operating groups/departments within USH in a timely and professional manner
Evaluates PLC software, proposes software changes and implements changes when authorized
Maintains machines and equipment in safe, operating order. Makes repairs as appropriate or recommends when vendors should be contacted for servicing
Study specifications such as blueprints, sketches, or descriptions of parts to be fabricated. Determine dimensions and tolerances of pieces to be machined, sequence of operations, and tools, materials and machines required
Maintains and controls inventories at levels adequate to sustain efficient operations. Places special orders for materials and tolls based on work orders
Adhere to all Standard Operating Procedures within Attraction Services and USH at large
Ensure that unscheduled work performed is correctly documented
Assist in the development and implementation of processes which enhance system efficiencies and increase productivity
Maintain proficiency in all areas as it pertains to his/her area(s) of responsibilities assigned
Must be 18 years of age or older
3 -5 years hands-on experience maintaining, troubleshooting and repairing complex electro-mechanical, hydraulic and pneumatic equipment and machinery
3-5 years of experience in automation controls including: calibration, PLC programming, motor and variable frequency drive control
Demonstrated experience with operator interfaces, touch screen software and the integration of ladder logic & touch screens with machine control systems
Associate’s degree (AA) from a two-year college/technical school in applicable discipline(s) or equivalent experience required
Ability & willingness to work a variety of schedules, overtime, weekends and holidays with short notice
Must possess excellent interpersonal communication skills both verbal and written on a technical level
Requires moderate to heavy physical exertion
Must be able to lift, carry, push, and pull heavy materials and objects up to 50lbs
Must be able to stand, walk, bend, stoop, climb, etc. for extended periods of time
Bachelor’s degree from a four-year college or university preferred
Possess knowledge of electrical/electronics, hydraulic/pneumatics, mechanical/structural, welding/ fabricating, program Allen Bradley logic controllers (PLC), machining, inventory control inspection, quality control procedures
Experienced in metal fabrication, designs and technical blueprints for all the disciplines listed above
Demonstrated ability to work with all levels of employees and management, and willingness to give assistance to co-workers. Strong team player
Demonstrated ability to work independently under pressure; proactive thinker/self-starter
Theme Park Operations knowledge

Maintenance Controls Technician Resume Examples & Samples

Evaluate and make recommendation on equipment updates and new equipment
Troubleshoot programming failures and makes adjustments and document as necessary
Sets up new programs, PLC ladder logic, robot interfacing and documentation
Implements improvements in cycle time of robotic welding and assemblies
Trains personnel in the use of robots and PLCs
Supports efforts to achieve department and plant goals on Employee Opinion Survey
Works with vendors and/or contractors, displaying company’s core values
Assist in all maintenance and repair work in either the plant or on the grounds
Trouble shooting of electrical, hydraulic, pneumatic, and HVAC as needed
Responsible for helping maintain a clean and safe work environment
Works in a safe manner and observes plant safety rules and regulations at all times
Aware of all Health, Safety & Environmental policies
Know and understand Victor Mfg. Quality policy
Two or four year degree in mechanical or electrical engineering or related field preferred and/or 4 years job related experience
3-5 years experience working with automation equipment
Understanding of metal stamping, spot welding and assembly processes
Complete understanding of PLCs and programming with the ability to program/teach robots
Electrical knowledge (National Electrical Code) and control wiring
Intermediate computer skills required
Able to prepare, read, write and interpret reports, instructions, procedures and business correspondence
Ability to read, write, analyze, and interpret technical procedures, blueprints, diagrams, requirements and business correspondences
Knowledgeable in Magna/Cosma equipment build standards
Must have excellent interpersonal, communication, and organizational skills (verbal and written)
Ability to work with a sense of urgency to meet deadlines
Ability to multi-task with accuracy
Ability to apply advanced mathematical concepts as appropriate
To apply common sense understanding to carry out instructions furnished in written, oral, or diagram form
To deal with problems involving several concrete variables in standardized situations

Controls Technician Resume Examples & Samples

6) Control Logix programming
7) Omron programming – Nissan and Toyota equipment
9) Devicenet trouble shooting and setup
11) Pilz troubleshooting
14) Maintain Factory Talk Studio – panelview software
15) Ethernet I/O trouble shooting and setup
16) Follow all general safety requirements as it relates to robots and logic
Willingness to work extended or flexible hours as required to meet production demands
Must have good working knowledge and understanding of the assembly process
Must have strong team-focused and leadership abilities

Controls Technician Resume Examples & Samples

Receive instructions relative to priority needs and requirements
Program new and existing equipment plcs with appropriate documentation
Work on the design, fabrication, installation and try-out of new and modified equipment
Work with other departments in the troubleshooting of equipment and facility concerns
Effect repairs in a timely and efficient manner as required
Evaluate the job to be done in relation to tools required and the extent of materials needed
Estimate the time required for each job
Obtain the necessary equipment and tools required to do the job through various means including the toolcrib, toolroom or through special orders
Read, interpret and/or alter electrical wiring diagrams as required
Troubleshoot electrical control problems
Carry out any preventative maintenance work as required by the company preventative maintenance program
Operate the fork lift and high lift as required
Work is completed through use of various meters, computers, scopes, milling machines, drill presses, assorted grinders, lathes and various welders
Assist other maintenance departments and personnel as required
Liaise with all other departments including production, toolroom, engineering and quality control in the performance of duty
Through the Purchasing Department, liaise with outside contractors and suppliers
Responsible for the completion of daily time sheets
A Controls Technician diploma or equivalent is required
A proficiency in PLC programming, primarily with Allen Bradley is required
A working knowledge of multi-axis CNC controllers is desirable
A general knowledge of pneumatics, hydraulics and mechanical systems would be a definite asset
Ability to read detailed electrical and machine blueprints
Attention to detail is key as position involves work on equipment which is not easily replaced
Attends to Details/Organizes Work
Multi-Tasks
Results Orientated
Mathematical Aptitude
Time Conscious
Troubleshoots Problems
Adaptable

Controls Technician Resume Examples & Samples

Some overtime is expected as required by work load and emergencies
Ensure that all BAS control work is performed on time according to schedules
Ensure that systems are automatically operating within specified parameters (temperature, humidity, static pressure, amps etc.)
Coordinate with customers / end users to schedule repairs and calibrations
Perform repairs, set ups and calibrations for equipment and systems including but not limited to: room controllers, hood controllers, installing new points on the BAS systems. Setting up labs and offices for proper airflow. Able to troubleshoot electrical issues up to 480 volts
Work with engineers to determine appropriate start up and programming of BAS components to ensure the least amount of energy is used
Support Site Supervisor, BAS Engineer, and Other M&O personnel during commissioning, troubleshooting, & startup activities

BMS Controls Technician Resume Examples & Samples

Ensures that BMS system is operating properly and maintained at all times
Review and analyzing system data (alarms, reports, reliability, etc.) and developing initial recommendation on any maintenance changes, upgrades, replacements, etc
Monitor the operation and make adjustments on BMS systems. Record readings and make adjustments where necessary to assure proper operation of equipment. Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as required
Reviews and prepares daily BMS alarm reports. Generates corrective actions to remedy alarms. Works with client Quality Team to properly report all alarms and complete necessary documentation
Complies with departmental maintenance procedures
Assist the operations team in the maintenance and repair of building and equipment
Completes special tasks that include but are not limited to; Painting, locksmith work, tenant services requests, special cleaning, and general maintenance as assigned
Assists other operational staff members in repair and maintenance of building equipment
Knowledge of BMS systems and controls within a commercial environment
Able to provide information in the response to CAPA’s

Controls Technician Resume Examples & Samples

Install, repair and maintain electrical, electronic equipment, instrumentation as well as computerized systems (HMI, PC's, vision systems & network troubleshooting) related to manufacturing machinery and systems
Design and implement machine control software and programs for automation system projects to meet Quality, Manufacturing Engineering, and/or Customer requirements
Troubleshoot problems and implement design changes
Ensure equipment operates effectively based on customer specifications
Reteach and troubleshoot robotic material handlers and weld cells
Interface with suppliers and contractors on a technical level for the purpose of sourcing, troubleshooting and/or to ensure program goals are met
Create and maintain technical documents - document all electrical changes to machinery
Procure spare components, provide justification for ordered spares
Perform PM inspections as required
Assist with mechanical repairs as required
Take direction from the Maintenance Manager and Team Leader on priority of tasks
Must adhere to all MAFACT requirements
Must comply with all ISO 14001 (Environmental) and OHSAS 18001 (Health and Safety) systems and standards as it pertains to their work
Abide by all AODA and C-TPAT procedures that apply to their position
Electrical/Electronic/Mechatronic Technologist or similar Engineering degree/diploma/certificate or Trades Qualification and significant equivalent work experience
Proficient knowledge in the following software packages: Allen Bradley RSLogix 500,5000, Factory Talk View Studio, Allen Bradley Panel Builder32, Omron CX-Programmer, Omron NT-series Support Tool
Knowledge of welding and welding processes, Laser and MIG (Trumpf, Fronius)
Demonstrated experience in troubleshooting and programming PLC/Robotics in addition to electrical control system design
Experience with designing, building and wiring panels

Controls Technician Resume Examples & Samples

Troubleshoot equipment, process problems to complete quality improvements as required
Service, maintain, repair, install and test equipment in accordance to current machine specifications
Ability to create and modify electrical drawings, Process & Instrumentation Diagrams and schematics when required
Interface with suppliers and contractors on a technical level when required for the purpose of troubleshooting and debug
Follow Maintenance Manager and Team Leaders direction and task prioritization
Demonstrated experience in the following: PLC/HMI programming and troubleshooting, Robot programming and troubleshooting
Ability to read and understand technical documents, schematic design specification and update drawings as required
Understanding of Data Tracking and the use of Barcode Scanners or RFID
Knowledge in the following software packages: Allen Bradley RSLogix 500,5000, Factory Talk View Studio, Allen Bradley Panel Builder32, Omron CX-Programmer, Omron NT-series Support Tool

Controls Technician Resume Examples & Samples

Will plan and conduct preventative maintenance and work orders independently
SME-level knowledge of electrical schematics and ability to maintain and update
Make improvements as required to electrical PM’s on various manufacturing and packaging equipment, electrical panels, and document activities using computerized maintenance management system (SAP Plant Maintenance)
Recognized as being the SME in the Electrical Controls field
Effectively communicate with peers, supervisors, and upper management on a daily basis, and be willing to provide support where needed and complete other duties as assigned by Team Leader
Act as technical resource to operations/maintenance on controls related issues
Identify and recommend changes to improve plant performance utilizing current control systems
Support the introduction to the plant of new control technologies
Provide system management and administrative functions for PC and PLC networks, data historians, software version control and web based data display systems

Controls Technician Resume Examples & Samples

Safely troubleshoot electrical and electronic equipment that requires calibration
Perform and understand Vibration Analysis on equipment
Proficient in documentation and recording of all work to include calibrations, Vibration Analysis, Work orders, and other as required
Understand, troubleshoot, and modify PLC programs when required to perform Calibrations
Understand, troubleshoot, and make adjustments and recommendations for Systems monitored by Vibration Program
Proficient in the use of multiple types of calibration equipment
Be proficient and have experience with Siemens Step 7 Software, Siemens S7 and 505 PLC’s, Process Meters, Calibration Equipment, Excel, and Word
Proficient in control technician job functions / duties in order to perform as back-up controls technician when required
Flexibility to work alternative schedules / shifts when required in performance of primary duties or as a back-up controls technician
Support capital projects by ensuring all AM / PM requirements are completed and in compliance with EM deliverables
Calibration of Equipment
Vibration and Calibration Checks & Services
Vibration Analysis
Communication (Verbal and Written) to include Reports / Reporting
Support Expense and Capital Projects
Certificate in Industrial Electrician or related field preferred
Proven industrial experience to perform essential functions. 5 years in an Electrical Technician or Calibration Position preferred
Understand and modify PLC programs for Allen Bradley, Siemens S7 and 505 preferred
Understand test equipment used in calibrations
Understand equipment used in vibration analysis preferred
Special Skills: Efficient in Excel and Word
Demonstrate behaviors and competencies to Deliver Consistent Results and Create Collaborative Relationships

Senior Controls Technician Resume Examples & Samples

Perform repairs, improvements, and adjustments to electrical and controls equipment with minimal guidance or supervision
Responsible for investigation and troubleshooting to a component level
Must have a thorough understanding of facility electrical and mechanical equipment
Must have a thorough understanding of Rockwell Software Platform or Siemens Software Platform
Requires basic computer skills and knowledge of applicable software for reporting
Safety/Good Manufacturing Practices (GMP) Leader in adhering to safe work practices; Lockout Tagout (LOTO), Confined Space, and all other plant safety requirements related to supporting machinery
SME-level knowledge of electrical schematics and ability to maintain and mark-up
Lead the implementation of small scope projects in their assigned area
Participate in TPM Pillar projects as assigned
Will be recognized as being the SME in the Electrical Controls field
Will effectively communicate with peers, supervisors, and upper management on a daily basis, and be willing to provide support where needed and complete other duties as assigned by Team Leader
Act as technical resource to operations, maintenance on controls related issues
Identify and recommend changes to improve plant performance utilizing existing or new control systems
Troubleshoot and analyze electrical and control system applications and make necessary modifications to get the systems up and running again

Power & Controls Technician Resume Examples & Samples

Installation and maintenance of Process Research Laboratory equipment
Electrical power, controls, instrumentation and programming support of projects
Troubleshoot and maintain electrical systems, process systems and instrumentation
Troubleshoot and maintain variable frequency drives and control systems
Wiring of Industrial Control Panels and associated devices
Preventative maintenance and calibration of equipment
Electrical Design Implementation - codes and standards
Understanding of NEC, NFPA 70, 70E, UL 508A, AutoCad, ladder diagrams, electrical schematics
Knowledge of Allen Bradley PLC and Panelview HMI systems, Powerflex frequency drives and Kinetix motion control
Knowledge of communication networks (Remote I/O, Controlnet, Ethernet, Devicenet and Modbus)
PLC/HMI programming & Troubleshooting
Maintain, trouble-shoot and modify Power wiring 480/277 – 208/120V 3-phase, control wiring 120V and 24V DC systems
Maintain, trouble-shoot and modify Industrial Instrumentation
Technical program or equivalent work experience
Good interpersonal, leadership, and problem-solving skills

Engineering Controls Technician Resume Examples & Samples

Perform PLC and controls troubleshooting for the company’s equipment
Follow LOTO, GMP Policy and Ecolab Procedures
Instruct and train mechanics in areas of safety hazards, operating procedures, and any pertinent information pertaining to controls and PLC
Lead, coordinate, communicate, and verify corrective actions that prevent the occurrence of non-conformities relating to the product, process, and/or quality systems
Assist with training in controls, PLCs, VFD’s and programming
Must keep equipment in a safe working condition. Schedule daily, weekly, monthly, semi-annual, and annual PM of control and PLC systems. This includes electrical systems also
Must be familiar with and ready to perform ERT duties at all times
Must ensure the accuracy and timeliness of all work completed and must train others as needed
Assist with daily reduction of downtime and initiate improvements that will improve the efficiency of the company equipment
Must understand and be able to explain and demonstrate how the following safety equipment operates: Fire Pumps, Sprinklers Risers, Fire Controls, Post Indicators valves and NFPA 70E
Troubleshoot robots from schematics and perform pick and place with the PLC on the robot
Configure and setup Ethernet communication systems
Knowledge of Arc Flash ratings and proper PPE for the ratings
Ability to install and maintain AB Panel view Plus HMI’s, program Control Logix PLC, Program PLC, Micro Logic, and PLC SLC 500
Install and configure flow meters, pressure transmitters, temperature transmitters and setup a Hart Communication with any given transmitter from any manufacturer
Must be able to setup up Node addresses and Network for PLC and 0-10 Volt Analog Card, 4-20 MA Analog Card, and PID in a PLC
Must be able to program PLC to collect information needed for trending and install flags for monitoring
Troubleshoot electrical issues on Chillers, Boilers, Screw Compressors, Air Dryers, and any other troubleshooting of electrical issues with or without schematics
Utilize Electrical/Mechanical skills for installation of new equipment
Keep work area clean and free of clutter at all times
Perform any task assigned by Supervisor or Reliability Manager
Ability to work without Supervision
Advanced knowledge of electrical wiring
3 years’ experience in PLC and HIM Programming
Able to read blue prints and wiring diagrams
Able to follow written and verbal English instructions

Propulsion Engine Controls Technician Ddg-msc Resume Examples & Samples

Utilize computers including the Microsoft Office Suite for compiling information for reports and history files and transfer digital pictures from camera to computer and enhance as required and label them for report purposes
Communicate effectively in writing and orally
Technical SME support for INSURV/TSRA inspections/assessments, engine balancing and Sea Trials

Tech-h&v Controls Technician Resume Examples & Samples

Lift 40 lbs. from floor to waist x 2 with a 12 second interval Lift 40 lbs. from floor to shoulders x 2 with a 12 second interval
Lift 40 lbs. from floor to crown x 2 with a 12 second interval
Carry 40 lbs. with two hands for 40 feet x 6 (Allow a 60 second rest break after each carry)
Pull horizontally at waist level – 100 lbs. peak isometric force (not sustained)
Slanted Ladder: Climb up and down 20 rungs x 3 for a total of 60 rungs. (Allow a 60 second rest period after climbing up and down 30 rungs)
Six (6) years of HVAC system controls expertise including experience in cold climate work in the field to include hands-on installation, service, commissioning, testing and troubleshooting systems, required
Five (5) years pneumatic & electronic controls experience to a level of being able to understand the function and application of individual components, required
Experience with internal components of standard heating and ventilating equipment such as: electric convectors, electric unit heaters, electric duct heaters (modulating and non-modulating), etc., required
Demonstrated experience organizing, evaluating and executing appropriate testing or troubleshooting methodology in applying to a large variety of systems with no direct supervision including awareness of the impacts of external conditions and processes on the system in question, such as thermostat locations, un-insulated hot piping, heat stratification, etc
Valid driver’s license and ability to be insured by CH2MHILL’s auto insurer, required
High School Diploma or GED, required
Must possess a current National or State Refrigeration License, required

Controls Technician Resume Examples & Samples

Must have good mathematical and communication
Must have a general knowledge of hydraulics and pneumatics
Must be able to pay good attention to detail
Must be able to provide own tools needed for position

Project Controls Technician Resume Examples & Samples

Bachelor’s degree in civil engineering or construction management program (or related field of study) is preferred
Must possess strong problem solving, communication and attention to detail skills
Proficient in Microsoft Office Word and Excel
Ability to learn how to use new computer software
Construction field experience is a plus

Controls Technician Resume Examples & Samples

Responsible for end to end testing, downloading programming, starting up, commissioning, and servicing on assigned projects
Represents the company by serving as the direct customer contact and is responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment and systems at customer’s location
Coordinates with team leader and customer to precisely understand requirements for all on-site installation and repairs by extensively examining building layouts, forecasting issues, gathering materials and synchronizing on-site work
Keeps current on Trane products concerning installation, operation, maintenance, service, and repair of direct digital control systems
Continually enforces safety to the highest standards and maintains security and accountability of company issued and procured assets by recording use, wear and conditions
Displays team effort and dedication to customer by maintaining flexibility to work overtime and weeks as the business requires, including occasional overnight stays
A High School Diploma or equivalent and 2-5 years of experience in HVAC/Controls; or equivalent combination of education (Technical School) and experience is required
EPA Certification Preferred (e.g. HVAC Journeyman, Boiler Operator, Gas Installer etc.)
This position requires working in diverse conditions including but not limited to mechanical equipment rooms with exposure to noisy operating equipment, exposure to extreme weather conditions, precarious places, and risk of electrical shock (high voltage)

Controls Technician Resume Examples & Samples

Setup the graphical interface and network connections for the controls
Represents the company by serving as the direct customer contact and is responsible for servicing products and equipment on assigned projects, ensuring customer satisfaction by identifying, analyzing, diagnosing and repairing equipment andsystems at customer’s location
Display steam effort and dedication to customer by maintaining flexibility to work overtime and weeks as the business requires, including occasional overnight stays

Controls Technician Resume Examples & Samples

Responsible for mounting controls components, installing electrical conduit, pulling cable and assisting with control system start-up and commissioning
Coordinates with project manager and customer to precisely understand requirements for all on-site installation by extensively examining building layouts, HVAC plans, gathering materials and synchronizing on-site work
Keeps current on Trane products concerning installation and operation of direct digital control systems
A High School Diploma or equivalent and 2-5 years of experience in HVAC/Controls/Electrical; or equivalent combination of education (Technical School) and experience is required

Trane Controls Technician Resume Examples & Samples

Responsible for end to end testing, programming, starting up, commissioning, and servicing on assigned projects
Coordinates with team leader and customer to precisely understand requirements for all on-site installation and repairs by extensively examining building layouts,forecasting issues, gathering materials and synchronizing onsite work
Display team effort and dedication to customer by maintaining flexibility to work overtime and weeks as the business requires, including occasional overnight stays
A High School Diploma or equivalent is required. Aminimum of 5-7 years of experience in HVAC/Controls or equivalent combination of education (Technical School) and experience is preferred
Valid Driver’s License with no major traffic violations, suspensions, or DUI’s inprevious 5 years
EPA Certification Preferred (e.g. HVAC Journeyman, Boiler Operator, Gas Installer etc)

Controls Technician Resume Examples & Samples

Uses a variety of hand tools, interpreting control drawings, plans, and specifications, to mount, assemble, test, and program the system
Analyzes, diagnoses, and repairs direct digital control systems at customer's location
Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers
Maintains assigned stock of inventory, company equipment, and documents all related activities
Provides training and follow-up training at customer site
Provides sales leads to appropriate personnel
Turns in all required paperwork and reports in a timely manner
Represents company by serving as a direct customer contact
Identifies parts to order for repairs and timeliness of need
Provides technical support to customers on assigned projects
Inspects vehicles by checking vehicle condition and literature supplies
Maintains vehicles by keeping records of service manuals, scheduling, completed repairs and maintenance service
Maintains tools and equipment by inspecting for signs of wear
Regular travel requirements with occasional overnight stays. (5%)
Flexibility to work overtime/weekends, as required

Lead BMS Controls Technician Resume Examples & Samples

Is able to execute a full site survey and compile and supply a full dilapidation report, as defined by scope
Communicates with customer upon arrival and before leaving the work site. Meets regularly with customer to become familiar with operating problems and reach full understanding of customer needs
Understands and analyses relevant technical documents
Maintains and improves technical proficiency on Johnson Controls product lines, as directed by manager
Demonstrable experience of executing a full site survey, supplying a full dilapidation report defined by scope
Experienced in diagnosis and repairs of systems malfunctions
Proven track record of understanding and analysing technical documents Demonstrable experience working within multi industrial environments
BMS/Controls Service & Maintenance experience. Carry out planned and reactive maintenance tasks on Metasys Building Management System equipment
Carry out planned and reactive maintenance tasks on Control panel equipment
Carry out one-point calibrations on a variety of sensors and transducers
Carry out battery replacements on BMS equipment
National Certificate or equivalent in Engineering discipline (Electrical, Electronic, Building Services)

Controls Technician Resume Examples & Samples

Serve as an Electrical Controls resource for troubleshooting of production equipment in the Batch, Forming, Drying, Cutting, Firing & Finishing areas of the Diesel Manufacturing facility in Painted Post support the 24/7 manufacturing of Diesel Filters
Initiate and maintain relationships with Operations and Maintenance to provide first responder Controls and Level 1 I.T. support for the plant. Focus will be to safely get equipment back in operation and performing at established rates and quality. Detailed reports of activity will be sent out at the end of your shift to the Controls & I.T. Manger
Control system troubleshooting will include but not limited to, Programmable Control Systems, Human Machine Interfaces, Robots, Motion Control, Measurement Systems, Instrumentation, Dryers, Kilns, Material Handling Systems, Networks, Computer system hardware / software application support for MES and data collection systems
Work utilizing plant & division electrical controls standards. Serve as a technical resource for questions regarding deviation and interpretation as well as managing changes during off shift activities
Individual must be capable of executing assignments, in a team based environment, with minimal supervision
Associate’s degree in Electrical Engineering
3-5 years of engineering experience with demonstrated success designing, developing and implementing, robust state of the art control solutions using machine/motion control systems, flexible automation, robotics systems, and electro-mechanical systems into manufacturing
Allen Bradley Control logix PLC & machine/ motion control experience
High level of technical curiosity that will enable unique solutions to the technical challenges incumbent in the position
Ability and interest to learn, and apply, new technologies in support of overall technical objectives
Fundamental understanding of electrical design practices, machine/motion control systems, electro-mechanical systems, robotics, programming, and system integration
Demonstrated knowledge of control systems design, programming, and systems integration with understanding of open loop and closed loop control systems
Familiar with state of the art technologies in the following areas: control systems integration, controls architectures, PLC’s, motion control systems, electro-mechanical drive systems, robotics, part sensing, vision, risk assessment, and safety systems
Ability to work in a team based environment and participate on a highly matrixed team
Possesses an understanding of general mechanics and ability to apply it in
Control system (PLC, motion control, safety devices, high level languages) and vision
Computer science skills in hardware, software, VB, Database & C++ programming
Knowledge of glass and ceramic manufacturing
Forward thinking
Prior experience moving a new product or process from development into manufacturing

Controls Technician Intern Resume Examples & Samples

Verify system functional performance to ensure proper operations according to contract requirements including: testing, calibrating verify system and peripheral device operations as per preventative maintenance schedule
Maintain customer system documentation with any configuration or model changes
Availability for and performance of duties outside of normal working hours as required
Be responsible for Honeywell assets such as tools, software, and site database
Keep documentation and paperwork up-to-date
Pursuing a degree in Building automation, engineering, or related discipline
Must be able to participate in an internship prior to graduation
Knowledge of HVAC systems, control systems, mechanical system operation and building facilities
Knowledge of fire alarm system codes, NFPA guidelines, devices used and functions for fire alarms applications
Knowledge of security systems, access control, CCTV, digital video and controlling software

Radiological Controls Technician Resume Examples & Samples

Must exercise a high degree of analytical ability and judgment. Makes relatively important decisions affecting plant availability during abnormal operating conditions when standard methods or procedures are not available
Intra- and inter-company contacts are frequent and routing, requiring tact in achieving cooperation and compliance with radiation procedures
Responsibility for plant and service is very extensive where mistakes may cause very heavy financial loss and/or widespread interruption of service
Must be thoroughly familiar with the radiation protection procedures for the nuclear generating station, including a working understanding of nuclear plant systems and their radiological content

Direct Digital Controls Technician Resume Examples & Samples

Works on various portions of direct digital controls systems including maintenance, programming, installing, maintaining, repairing, troubleshooting, modifying, and testing
Operate and maintain Direct Digital Control Systems that controls utility and facility systems and equipment. The equipment, consisting of either many different kinds of circuits, or multiple repetition of the same kind of circuit, includes, but is not limited to the following: a) controls, programmable logic controllers, contacts, wiring; b) electronic transmitting and receiving equipment (e.g., sensors and cables); c) digital computers, and d) industrial equipment; e) computer peripherals and software
Applies advanced technical knowledge to solve unusually complex problems (i.e. those that typically cannot be solved solely by reference to manufacturers’ manuals or similar documents) in working on digital controls equipment. Examples of such problems include programming changes, operational troubleshooting, cable continuity, sensor calibration, isolating malfunctions, and frequent engineering changes
Utilizes knowledge of PC operations with DDC software
Creates graphic displays and program DDC controllers using software and associated programming language
Works closely with experts in the area where the direct digital controls are applied

Industrial Controls Technician Resume Examples & Samples

Oversees and provides assistance with any maintenance modifications and/or system upgrades of Materials Handling Equipment
Assesses the efficiency of materials handling equipment and defines necessary modifications
Develops and solicits bids from vendors for maintenance janitorial snow removal landscape and other contracts necessary to support all building and MHE systems
Responsible for associate relations functions including directing supervising and developing a staff of Maintenance Support Specialists
Ability to troubleshoot complex automated systems controlled by computers programmable logic controllers (PLCs) and microprocessors in a high-volume work environment

Controls Technician Resume Examples & Samples

3-5 years of engineering experience with demonstrated success designing, developing and implementing, robust state of the art control solutions using machine / motion control systems, flexible automation, robotics systems, and electro-mechanical systems into manufacturing
High level of technical curiosity that will enable unique solutions to the technical challenges incumbent in the position. Ability and interest to learn, and apply, new technologies in support of overall technical objectives
Fundamental understanding of electrical design practices, machine / motion control systems, electro-mechanical systems, robotics, programming, and system integration

ME Controls Technician Resume Examples & Samples

Monitor control functions within paint system
Fix logistical / control errors within the paint system as required
Respond to service calls and trouble shoot any equipment issues
Experience working with PLCs (programmable logic controllers) , preferably Allen-Bradley or Siemens
Ability to work 3rd shift (10:00pm to 6:30am) as well as some Saturdays

Controls Technician Resume Examples & Samples

Lead and support the culture development of Mars 5 Principles and Engagement
Coach Mars safety standards, tools and techniques
Identify, evaluate and eliminate safety risks using behavior based safety program and near miss reporting
Perform mechanical and electrical preventative maintenance on various manufacturing equipment, PLCs, control networks, instrumentation calibration, drives/servos, admin networks, and electrical system
Complete work orders as assigned and proactively look at work orders to complete as time permits
Document preventative maintenance and work orders using SAP
Troubleshoot and repair routine and advanced electrical issues, and mechanical issues as needed to support Maintenance Techs
Participate and sometimes lead Focused Improvement Teams to eliminate losses
Develop/train Make and Pack Technicians to: grow functional/technical skills, learn troubleshooting and repair skills to operate equipment more efficiently, understand TPM activities
Train Maintenance Techs in areas of controls to grow their capability
Drive delivery at or above target of following metrics: TRS, production reliability, stops reduction, mean time between failure, defects found and fixed, work order/PM completion rate
Uses problem solving tools to achieve zero losses, ensure follow up to outages and root cause identification
The ability to handle multiple priorities and complexity
Understand and adhere to LOTO, confined space, and all other plant safety/GMP requirements
Mastery of technical skills and equipment within main area of responsibility
Effective written and oral communication
Ability to teach and develop Maintenance Techs and Operators
Advanced computer skills to include Word, Excel, Outlook Email, and SAP
Proficiency in WOs, PMs, and maintenance activities of a manufacturing plant
Advanced electrical, controls, instrumentation and mechanical skills
Advanced understanding of electrical, hydraulic, pneumatic, and mechanical schematics/diagrams
Ability to use EPDM software to find and use electrical drawings in troubleshooting
Strong troubleshooting and problems solving skills
Proven ability to analyze data, determine root cause, and eliminate losses using problem solving tools
Demonstrated ability to develop self and continue to learn/grow
3+ years of experience in maintenance/reliability at Mars or equivalent
Advanced controls and electrical skills
Ability to convey communications clearly and concisely
Understanding of major functions within the plant and the ability to work directly with all levels and functions
Able to deal with ambiguity effectively
Successful completion of a drug and background screen
5+ years of in maintenance at Mars
Technical degree in industrial electrical/controls or related degree
3 to 5 years of experience in a TPM/technical, manufacturing environment
Demonstrated experience working in quality and safety
Functional knowledge and understanding of HACCP concepts

Senior Controls Technician Resume Examples & Samples

Bending, stooping, twist, turn, standing for extended time periods, reaching, climbing stairs, and lifting up to 50 lbs
Must be able to adapt to temperature and environmental extremes such as hot to cold, dust dirt and chemicals
Experience welding
Experience machining
Experience with mechanical maintenance
2 years of work experience within manufacturing, or a technical and/or trade discipline
Knowledge of electrical systems including single and 3-phase controls and distribution systems 600 Volts AC and less
Maintain, and troubleshoot AC and DC variable speed and servo controls in processing,
High school diploma, GED or equivalent education
Mechanical Certification

Project Controls Technician Resume Examples & Samples

Interacts with project controls team to collect cost data and enter into cost management spreadsheets
Works with project controls team to obtain and input schedule information into scheduling database
Sets up initial cost management spreadsheet templates for data input and report generation
Works with supervisors to assemble applicable fragnets of activities from reference plants to input into project schedules
Individual contributor with no subordinates

PLC Controls Technician / Evenings Resume Examples & Samples

Program or perform repairs on PLC systems
Change line for package changeovers
Enforce GMP, safety, and audit standards
Experience with PLC (e.g., industrial maintenance, computer control systems, etc.)
Experience with conveyers and airveyors (air cylinders, diverters, sensors, motor/speed controls)
Experience with pneumatics/air compression (e.g., valves, cylinders, etc.)

Instruments & Controls Technician Resume Examples & Samples

Maintain complete equipment files, logs, and drawings for all designated equipment
Assist in maintaining and controlling spare parts inventory to maintain plant reliability. Assist in physical inventories
Participate in the administrative maintenance of the plant operating manuals, technical references, prints and diagrams and preventive/predictive maintenance records
Inspect repair, install and remove all types of motors, generators, transformers, switches, control equipment, wiring, electrical signal and communication systems, and storage batteries, and work with electrical systems up to and including 4160 volts
Conduct trouble shooting and analysis on DCS, PLC and GE Mark VIe turbine control equipment
Maintain all plant instrumentation and electrical test equipment
Fully support and participate in NRG Safety and Regulatory Compliance Programs
Complete other tasks as assigned by the Maintenance Manager or the Plant Manager
Ability to understand procedures and instructions specific to the area of assignment as would be acquired in four years of high school
Graduation from an accredited Instrument Technician Program. 2 years industry experience is preferred, but not required
Experience in working with voltages up to 4160 volts highly desirable
Must have excellent oral and written communication skills. Ability to work well with others and be self-directed, as well as apply creative solutions to unique ICE problems is desirable
Successful candidates must receive a rating of Recommended on the Pre-emloyment assessment test

Controls Technician Resume Examples & Samples

Safety First - Obey the plant’s safety rules and procedures by wearing PPE at all times and immediately addressing all safety concerns. Promotes an environment where zero injuries are the expected standard
Troubleshoot various manufacturing equipment
Support continuous improvement and lean manufacturing principles
Troubleshoot ControlLogix/GuardLogix programs
Make modifications to existing equipment as required
Ethernet/IP, DeviceNet and ControlNet troubleshooting
Maintain FactoryTalk View Studio HMI projects
Assist in the troubleshooting of robots in both programming and electrical
General knowledge of industrial maintenance with an emphasis on electrical, mechanical or controls application

Controls Technician Resume Examples & Samples

Operates, monitors, maintains, and repairs, EMCS components that support the facility and infrastructure
Plans and lays out work from blueprints, drawings, models, and verbal and written instructions
Disassembles malfunctioning instruments, examines and tests mechanism and circuitry for defects; troubleshoots equipment in or out of control system and replaces or repairs defective parts, reassembles instrument and tests assembly for conformance with specifications
Adjusts and repairs final control mechanisms, such as automatically controlled valves or positioners, and may calibrate instruments according to established standards
Plans, organizes work, and meets all deadlines
Does a variety of tasks in any single day
Responds to emergency site maintenance as required
Inspects and diagnoses problems to determine corrective repairs
Performs on-call and preventive maintenance duties as necessary
Helps perform periodic stock inventories and prepare material requisitions for replacement items as required
Operates Government or Wolf Creek-owned motor vehicles and/or other equipment
Coordinates with other trade and warehouse personnel in the identification of proper and correct materials, parts assemblies, and requirements for a variety of requisitions necessary for the job/task
Performs various lower classified duties such as (but not limited to) file maintenance, workspace cleanup

PLC Controls Technician Rotating Shifts Resume Examples & Samples

Perform preventative maintenance or repairs on more advanced production equipment as needed
Direct activities of outside contractors working on assigned line
Experience with basic electrical systems (e.g., starters, fuses, contacts, relays)
Experience with hydraulic systems (high pressure cylinders, pumps, valves, troubleshooting)

Lead Controls Technician Resume Examples & Samples

Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all controls technicians in the branch. Provides safety awareness while working on site with Johnson Controls subcontractors
Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains mechanical workforce on
Other duties related to the commissioning and servicing of building controls and facilities
Five to seven years of increasingly responsible experience in servicing HVAC electronic control / DDC and HVAC equipment
Ability to coordinate the work of others on multiple job sites
Must have experience in writing as well as demonstrated understanding of computer programs and software applications as related to the HVAC Industry
The ability to obtain and maintain a DoD Secret security clearance required. (This involves a background/character, criminal history, employment, and credit check.)

Lead Controls Technician Resume Examples & Samples

Provides jobsite coordination for panel and field device physical locations. Ensures
Coordinates with Project Engineers on bundled jobs to deliver cost efficient solutions that
Follows all safety standards and has the highest regard for employee and subcontractor safety
Must have relevant technical hands on experience in systems design and commissioning of digital HVAC controls systems (DDC)
Must have the ability to communicate technical material to a non-technical audience
Must demonstrate the ability to perform work independently
Strong personal computer skills
Must have knowledge of control theory and HVAC systems and equipment
Ability to engineer drawings preferred
Experience with Metasys strongly preferred

Senior Controls Technician Resume Examples & Samples

Communicates with customer upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customer to become familiar with operating problems. Keeps customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work
Five to seven years of increasingly responsible experience in servicing HVAC electronic control and HVAC equipment
Must have experience in writing as well as demonstrated understanding of computer programs and software applications as related to

Controls Technician Resume Examples & Samples

Provides sketches of field changes and discrepancies for engineering corrections and drawings
Communicates with customer upon arrival and before leaving the work site
Ensures high levels of customer satisfaction
Meets regularly with customer to become familiar with operating problems
Keeps customer informed on the nature of service provided outstanding issues and recommends system enhancements, upgrades, and or repairs
Promotes the sale of add-on work
Manages assigned work to meet professional execution, of time and customer satisfaction
Reports problems or changes to management immediately
Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner
Adheres to all Johnson Controls and customer safety standards
Provides safety awareness on work sites
May provide training to customers on electronic control systems operations
Delivers manuals and documentation to the customer for training needs as required
Mentors and trains mechanical workforce on building automation systems
Provides support to the mechanical staff on non-complex, non-critical equipment
Compiles job documentation, such as certificate of completion, customer training
Vocational School four year program or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field plus three years of industry experience or five years experience in servicing electronic and/or mechanical systems in the HVAC industry
Generally required knowledge includes HVAC controls systems, facilities management systems, site preparation, peripheral equipment installation and servicing techniques
Effective interpersonal skills to properly represent Johnson Controls to customers and other outside contacts in an ethical and professional manner
Ability to explain technical information to technical and non-technical people
Leadership skills to support the activities of Mechanics working on non-complex, non-critical Building Automation equipment on a job site
PC experience required and the ability to program HVAC related software

Senior Controls Technician Resume Examples & Samples

Actively pursues additional work through change orders. Evaluates the contractual scope of work and the impact of client issued bulletins, field directives and/or scheduling changes. Communicates both technical and business related issues with the clients
Manages the selection, ordering, budget and delivery schedule of materials to be procured for the projects assigned via our web-based tool process
Secures pricing and availability from outside vendors and suppliers, mechanical and electrical subcontractors including scope, terms and conditions. May request several bids in pricing process. Oversees subcontractor payment and billing processes
Provides jobsite coordination for panel and field device physical locations. Ensures installation is in accordance with Johnson Controls standards and project requirements
Manages and completes the loading, device verification, and commissioning of all system controllers as required. Validates complete system functionality and resolves issues with subcontractors and others to ensure proper operation. Provides accurate project as-built and commissioning documentation
Manages costs, billings and collections. Completes project billings in a timely and accurate format to the client. Maintains profitability goals and positive cash flow through best business practices and continuous improvement metrics
Provides coaching, mentoring and technical assistance to System Technicians, Electrical Installers and System Designers. Provides technical assistance to subcontractors. Ensures that delegated tasks are done accurately, on-time, billed, within budget and within scope of the contract
Effectively communicates the status of projects to management as required and provides monthly forecasts of revenue, costs, and gross margin
Sends warranty letter to JCI customer upon substantial completion of project and ensures proper execution of warranty
Develops project plans and coordinates the required resources to ensure timely and cost effective installation and completion of assigned projects
Performs site-specific training for owner/operator on the total system in full or with assistance. Ensures owner/operator has been trained. Provides proper documentation and manuals for system operation
Develops and maintains viable long-term relationships with contractors, clients, consultants and subcontractors. Attends job progress meetings as required
Coordinates with Project Engineers on bundled jobs to deliver cost efficient solutions that exceed customer expectations

DC Controls Technician Resume Examples & Samples

Exhibit the ability to troubleshoot and perform basic design of PLC logic, operator interface terminal, energy management systems and electrical installations
Statistically interpret and improve automated system’s performance parameters, at macro/micro level
Perform Preventive Maintainance for controls and systematize electrical/control parts inventory
Coordinate with vendors, installation of electrical or controls; as instructed
Maintain accurate record keeping such as: work orders, timesheets, parts requests
Maintain parts procedure and inventory control
Ability to use Relay Ladder Logic and Functional Block Diagram Editor
Possess a functional understanding of configuring closed loop control utilizing PIDE in FBD Editor
Controlnet
Devicenet
Profibus
Universal Remote (I/O) Network
Sercos Interface
Functional knowledge in configuring instrumentation, referring to manufacturer documentation
Strong ability to read manuals and understand functionality of instrumentation and use of configuring software
Functional (intermediate) understanding of electrical circuits, in reference to industrial automation
Familiarity with current National Electrical Code (NEC)
Ability to use process meter and operate oscilloscope
Functional familiarity with HVAC principles for Building Management Systems (BMS)
Knowledgeable in the assembly of electrical, pneumatic, and hydraulic systems, robotic operation and vision systems and the ability to assemble new equipment; and modify existing manufacturing equipment
Connect, test, and maintain electrical systems for a variety of purposes, including climate control, security and communications
Understanding of 3 phase distribution and 3 phase power transmission system
Firm grasp on testing 3 phase related equipment 480v and below
Energy management (BMS) software and hardware familiarity
Clear understanding of power systems grounding and safe grounding practices
Familiarity with Motor Control Center (MCC)
Understanding of Arc Flash Hazard
Familiarity: electrical construction and configuration (hardware/software) of basic electrical components used in automation systems: Solenoids – Beacons – Proximity Switches, etc
Understanding of PLC Hardware: Pico Controllers, MicroLogix 1500, CompactLogix, ControlLogix and SLC 500 systems. 1794 Flex I/O system
Familiarity would be a plus with: WAGO-I/O System, Siemens Simatic Step 7, Controller Area Network (CAN), B&R X67 I/O system
Must be flexible to work any shift and/or weekends as scheduled
Exhibit the ability to work independently, safely and with limited supervision
Must place the utmost importance on working safely, and maintain a safe work environment for yourself and others, at all times

Lead Proj Controls Technician Resume Examples & Samples

Reviews and analyzes schedule and cost management reports to identify potential issues
Reviews Purchase Order Requests, Check Requests and Bills of Material
Reviews revenue and budgets
Interacts with project controls team and execution teams to collect information on cost data and enter into cost management system
Typically responsible for
Supporting project controls professionals on multiple projects or one large project
Using independent judgment in decision making
Working with internal clients
Interacting independently at times with multi-discipline teams
0-2 years experience in telecommunications or other fast paced environment

Document Controls Technician Resume Examples & Samples

Process incoming and outgoing documents within the projects Electronic Document
Review documents for quality and proper workflow responsibility
Responsible for filing of project records with both projects’ and NYSTA’s document management system
Create Daily Log for Incoming and Outgoing documents and weekly logs for third party correspondence
Maintains files of project/program records and documentation
Support discipline leads (cost, schedule, reporting and contracts) as required with additional document control related functions
Management System (PMIS)
Provide support of PMIS system through guidance of Document Control procedure
Assist in claims documentation
Research project documentation including plan sets as directed to determine project milestones and sequencing
Read project diaries and assigns CPM codes to contractor activities to help in the creation of as-built CPM schedules
Prepare monthly progress and other ad hoc reports in coordination with project task leaders
Assists with review of construction schedules for compliance with project documents
Support in document control and other assistance to the project change order management group
Bachelor’s degree in Engineering, or Construction Management preferred
1-4 years of experience is preferred
Familiarity with SharePoint/Open Text and Microsoft Office preferred
Background in project design or construction preferred
Experience with NYSTA or NYDOT Change Order Process preferred

Measurement & Verification Controls Technician Resume Examples & Samples

Review EPC contracts to gain understanding of Ameresco’s M&V obligations
Participates in the commissioning process to ensure that the Energy Management System (EMS) is functioning as intended
Assists in the pre- and post-construction measurement of equipment installed by the Construction group
Performs quarterly EMS inspections (remotely and on-site) and documents changes in the occupancy schedules and set-points
Perform annual EMS inspections to ensure the equipment is operating in accordance with the contract requirements
Obtains trend data from the (EMS) and retrieves data from light loggers
Maintains positive customer relationships
Specific prior experience in the following areas

Controls Technician, nd Shift Resume Examples & Samples

PLC Programming experience
Motor Control/ Frequency drives experience
Minimum of 2 year degree in electrical electronics or mechatronics required although practical experience may be accepted
Troubleshooting electrical motors necessary with experience using a multi-meter/ ammeter/ megohmmeter (megger)
SLC 500, PLC5, Control-Logixs experience
RS-Logixs 5, 500, 5000 experience
Allen Bradley Panel view plus experience
Allen Bradley power flex drive
Ethernet networking knowledge / experience

Maintenance Controls Technician Resume Examples & Samples

PLC Experience with Ladder logic and Allen Bradley
Use shop mathematics, work from blueprints, repair manuals
TPM knowledge preferred
Knowledge of mechanics, hydraulic welding, pipefitting, basic electricity to diagnose machine problems. Equivalent to 2 to 3 years trades training
Over 2 and up to 3 years experience
Perform a variety of building and equipment, maintenance duties including machinery installation and repair, run conduit, pipefitting, welding, cutting, and carpentry. Judgment required to determine extend of repairs, replace or repair parts, fit bearing, gears, move and install machinery
Moderate physical demand consisting of frequently exerting moderate and occasionally exerting average effort in handling tools and instruments moving and positioning parts and materials
Continuous mental and visual attention required to perform a variety of electrical, electronic, building and equipment maintenance duties
Constant care in working overhead and in handling pipe and conduit close to electric circuits up to 480 volts to prevent serious or partially incapacitating injuries to others
Responsible for own work only
Somewhat disagreeable working conditions. Exposure to dirt, oil, and noise with at least one being continuously present to the extent of being disagreeable
Exposure to water, oil, boiler, chemicals, Uses lift truck

Controls Technician Resume Examples & Samples

Shall understand and be proficient in writing programs for various brand robots, in a compressed launch schedule, which includes writing programs from scratch
Shall work with Engineer’s, AME and possibly customers, in NPIS/LEAN events to improve launch performance
Shall work ‘one-on-one’ with automation integrators to ensure the most proficient use and launch of robotics and automation
Shall work with the Electrical Engineering team to optimize automation and automation integration
Shall efficiently and effectively identify and help diagnose production tooling and equipment problems on automated equipment, correct problems and improve manufacturing
Shall commit to complete the Tenneco Electricians Technician Journeyman Certificate within three years
Will actively participate with NPIS teams to evaluate and provide input for assembly, tooling, and equipment prints for existing and new program changes; especially where there is automation
Shall set up and conduct quality tests under operational conditions to investigate design feasibility for new design proposals, and obtain data for development, standardization, and quality control
Shall record test procedures and results, numerical and graphical/statistical data, and using facts and data, provide recommendations for changes in product or test method
Must perform his/her job within acceptable safety, environmental, quality, productivity and performance standards as outlined in plant policies, handbook and applicable work instructions
Shall perform tooling setup and adjustment of production equipment to meet blueprint specifications
Must be willing to assist in other areas of support when requested
Shall assist in technical training of manufacturing team members
Team member should be flexible in working traditional and non-traditional work hours, as required
Certification in applicable Industrial Robotic Program
High School Diploma/GED, Associates Degree, or equivalent in applicable technology
Advanced Experience with Kuka, Motoman and Panasonic robots preferred
Must have a proven record and evidence of programming and debugging robots, pendant control; preferably >2 to 3 years of Robotic manufacturing experience preferred
Must be able to work independently but perform effectively and sometimes serve as a leader in a team environment and have the ability to lead teams
Requires basic PC skills- work processing, spreadsheet and database applications
Advanced understanding of MIG welding processes and weld terminology and symbology
A functional understanding of ANSI Y14.5M Geometric Dimensioning and Tolerancing will significantly benefit the candidate’s ability to be effective and efficient
Ability to apply and understand precision measuring instruments, tooling and machinery
TS-16949 & ISO 2001 familiarity including an understanding of APQP and PPAP is required
Posses a good understanding of the Tenneco Quality System and TS-16949 & ISO 2001 regulations

Controls Technician Resume Examples & Samples

The design, troubleshoot, and improve factory control and automation systems for new and existing equipment
Supports manufacturing in troubleshooting automation and controls issues
Participate on internal teams in order to facilitate the development, maintenance and continuous improvement of factory automation
Influence and support the design and implementation of factory
Competent in programming PLC's, specifically Allen Bradley
Understanding of industrial network infrastructures, including Ethernet and DeviceNet
Posses the ability to read and understand controls prints. Be able to modify prints using AutoCAD
Exposure to technologies such as RFID, vision systems, and robots
Has general knowledge of tooling and equipment associated with a manufacturing environment
Competent in various PC related skills. Including spreadsheets, word processing, email, and the internet
Posses the ability to interact in a team environment with other employees and groups
Associate's Degree or Journeyworker Card Holder (Industrial Electrician)
2-6 years experience

Controls Technician nd Shift Resume Examples & Samples

Report directly to the Lead Controls Engineer
Perform all work according to Company safety policies, recognized industry standards, and follow at all times what is known to be safe practices
Perform risk assessments, design, and implement safety improvements on manufacturing equipment
Participate on internal teams in order to facilitate the development, maintenance, and continuous improvement of factory automation
Influence and support the design and implementation of factory automation equipment
Facilitate the definition and execution of design verifications and manufacturing control plans
Engineer controls and software solutions for manufacturing work cells and assembly lines
Participate on internal and external teams from project charter development, budget, timeline, management, and execution
Associates Degree in EE or Electro/Mechanical is preferred
2 years' experience in a similar position is preferred
Experienced in programming and troubleshooting PLC's, specifically Allen Bradley
Familiarity with Operator Interfaces (HMI's)
Ability to read and understand controls prints
Ability to modify prints using AutoCAD
General knowledge of tooling and equipment associated in a manufacturing environment
Competent in various PC related skills including MS Excel, MS Word, email, and the Internet
Ability to interact in a team environment with other employees and groups

Controls Technician Senior Resume Examples & Samples

Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads
Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner
Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals
Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all controls technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors
Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required
Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains mechanical workforce on non-complex, non-critical equipment
Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists
Conducts extensive self study(reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company
Seven to ten years of increasingly responsible experience in installing and servicing electronic control and HVAC equipment
Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner
Possesses the ability to explain technical information to technical and non-technical people
Demonstrated knowledge of the construction or HVAC industry
Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems
Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e. LON, BacNet, N2, Modbus, etc)
Demonstrated advanced computer skills required, and computer -related drafting tools. Must have experience with Johnson Controls current and legacy control products and systems

Controls Technician Senior Resume Examples & Samples

Achieve and maintain a high level of technical competency
Support engineering projects by designing control systems utilizing standardized design methodologies including Sequential Function Charts and Data Flow Diagrams
Develop and design new computer applications by preparing system flowcharts, report and screen layouts, source documents, and detailed specifications
Prepare job aids, user documentation, systems documentation, standard operating procedures, and training materials for plant automation systems
Direct the work activities of outside contractors, maintenance technicians, and other associates in the installation of instrumentation, PLC based control systems, and PC based operator interfaces
Provide project planning and estimate moderately complex jobs
Act as technical resource to operations/maintenance on controls related issues including troubleshooting, analysis and recommending practical corrective actions for control related problems
Identify opportunities and recommend changes to improve plant performance utilizing current control systems or by improving current systems
Troubleshoot control system applications and make necessary modifications to get the systems up and running again
Troubleshoot, analyze, and recommend practical corrective actions for control related problems
Train and support non-technical users on the use of plant floor automation systems
Use and follow all engineering standards when implementing projects
Provide input into site engineering standards for programming and systems design
Gather data and analyze information requirements in preparation for the design of Level II, batch control, data gathering, web, and control systems
Perform programming, testing, and debugging for new systems as well as for the enhancement of existing systems
Modify and/or develop Wonderware applications to support engineering projects
Support the introduction to the plant of new control technologies such as device networks, modular I/O, PLC programming software, etc
Provide system management and administrative functions for PC and PLC networks, data historians, software version control and web based data display systems. This includes maintenance, enhancements, procedures development, and troubleshooting
Demonstrated the ability to analyze, design, program, and test computer applications for control/information systems
Ability to work with minimal supervision and to take direction from multiple sources
Good understanding of Operating Systems environments including Microsoft Windows 2000 and XP, Windows Server, Active Directory and other Microsoft technologies
Ability to analyze system problems and correct them
Ability to communicate well both orally and in writing
Ability to work well with user departments to provide the operational support in the use of HMI terminals and software applications on Control Systems
Must be able to ascertain - through interaction with production and engineering staff representatives - the requirements for process control computer applications
Knowledge of CIM concepts and ability to work with Wonderware batch control, visualization on control software
Knowledge of databases such as Microsoft Access, Microsoft SQL Server, and database connectivity using ODBC and Wonderware automation software
Knowledge of web application development including basic web design, web connectivity, and database access
Understanding of networks including Modbus plus, Ethernet, Devicenet, and/or Protibus
Responsible for ensuring that there is no extended slow or downtime, damage to major equipment and possible health/safety risks to the individual or others
Troubleshooting skills in Hydraulics, Pneumatics, low and high level voltage, logic circuits and in all aspects of mechanical equipment
Knowledge of GMPs and clean design methods
Ability to troubleshoot programs residing in the Rockwell Automation PLC Control Systems in the plant
Must have a good understanding of interfacing with PLC's, scales and display devices
Basic experience in selecting and installation process instrumentation
Working knowledge of Microsoft Word and Microsoft Excel
A two-year technical degree or equivalent is required minimum for consideration. A degree in controls/electrical/electronics is preferred, including courses in computer science
Six years of control, electrical, or electronics experience including computer programming, systems analysis and design, electrical or electronics production system troubleshooting, and problem resolution will be considered in lieu of degree requirements
Two years of this exposure must be in an industrial production environment similar to Mars manufacturing facilities

PLC Controls Technician Resume Examples & Samples

Perform preventative maintenance on PLC systems
Upgrade production lines with new/upgraded equipment/technology
Experience with product manuals (e.g., reading and applying knowledge to make repairs)
Experience with troubleshooting (e.g., diagnostics, problem solving, etc.)
Experience with mechanical systems (e.g., gear boxes, chains, sprockets, motors, seals, bearings)

Controls Technician Resume Examples & Samples

Rotate on shift with assigned operating team
Perform mechanical and electrical preventative maintenance on various manufacturing equipment, PLCs, control networks, admin networks, and electrical system
Troubleshoot and repair routine and advanced electrical issues, and mechanical issues as needed to support other TRs
Train other TRs on shift in areas of controls to grow their capability
Uses IWS tools to achieve zero losses, ensure follow up to outages and root cause identification
90% of time on production floor working with technicians to deliver results, assisting in equipment setup and changeover
Ability to teach and develop TRs and operators
Advanced computer skills to include Word, Excel, Outlook Email, SAP, Internet
Advanced electrical, controls, and mechanical skills
Proven ability to analyze data, determine root cause, and eliminate losses using IWS tools

Controls Technician Resume Examples & Samples

Function as a technical resource to troubleshoot issues for operations, maintenance, and engineering
Assist in the installation, start up, and troubleshooting of control systems
Analyze electrical schematics to repair or replace electronic devices and systems
Assist in regular troubleshooting and calibration of instrumentation including flow meters, temperature transmitters, level transmitters, and load cells
Trend system operation and ensure equipment is running at design capability
Develop and implement machine upgrades and improvements working with both internal and external resources (vendors, contractors, corporate)
Maintain hardware including valves, variable frequency drives, motors, solenoids, photoelectric, and proximity sensors
Monitor and measure key system parameters to ensure equipment optimization
Demonstrate a comprehensive knowledge of electronic equipment, such as valves, variable frequency drives, Servos, motors, solenoids, photoelectric, and proximity sensors
Troubleshoots, performs major and minor repairs and preventive maintenance as required to ensure equipment reliability and on-going production
Highlights potential maintenance issues and takes corrective action including parts requisitioning and maintenance planning
Participates in structured group or team activities related to line/area performance improvement e.g. autonomous maintenance, housekeeping, problem solving etc
Seeks and understands production scheduling and demands. Prioritizes maintenance activities that support and facilitates these schedules and demands
Shares knowledge and develops maintenance skills in operator technicians. Identifies new opportunities for transferring skills to operator technicians. Actively participate in continuous learning opportunities
Experience working with PLC’s (including but not limited to: Allen Bradley ControlLogix, CompactLogix PLCs, Elau Schneider, Rockwell, Siemens)
Experience working with motion control (understand Servomotor/Servodrive working principle)
Experience using Wonderware and Allen Bradley Panel Builder
Basic knowledge about networking (Ethernet, Profibus, Sercos)
3+ years of Industrial Maintenance or Controls experience working in a manufacturing plant
Ability to design and troubleshoot 3 phase 480VAC and 24DC circuits
Ability to design and troubleshoot 120VAC and 24VDC circuits
Ability to program and troubleshoot PLCs utilizing ladder logic
Ability to commission and troubleshoot variable frequency drives
3+ years of experience using electrical test devices including multi-meters, oscilloscopes, and mega ohmmeter
3+ years of experience using Microsoft Office products (Word, Excel, and PowerPoint)
Ability to bend, climb, crawl, and work in confined spaces and hazardous conditions for up to twelve hours per day
Ability to move materials weighing up to 50 lbs while working in confined spaces
Ability to work an off-shift work schedule that includes weekends
Ability to be on-call including nights and weekends
Vocational school or technical certificate in an industrial related field

Controls Technician Resume Examples & Samples

Working knowledge of various manufacturers of PLC, HMI, AC and DC motor controls, and motion controls
Knowledge of industrial communication such as Control Net, DeviceNet, Ethernet
Experience programming and interfacing industrial robotics
Experience programming vision inspection systems for high speed manufacturing processes
Assists with assembly, installation, disassembly, and demolition of production equipment and building support equipment as required for upgrades or new installations
Accurately records/documents detailed information regarding work performed in our work order database
Participates in activities such as team meetings, problem solving sessions, etc
Provides 24/7 technical support for production
Ability to read mechanical and electrical and/or engineering blueprints, drawings and schematics
Associate’s Degree in Electronics, electrical Engineering or Equivalent Education such as military training, OR 5+ Years’ experience in industrial environment programming and debugging equipment
Experience with 24V/120V control, AC induction and servomotors, drives and PLC controls. Experience with input and output devices (i.e. proximity switches, solenoid valves, motor starters). Analog devices (i.e. transducers, encoders)
Experience with building control panel enclosures (i.e. layout, wiring, and debug in accordance to system schematics). Must be proficient in the testing and troubleshooting

Controls Technician Resume Examples & Samples

I. to assembly equipment as directed
1-2 years related experience and/or training in a manufacturing facility, automotive preferred
Experience with Vision Systems (Keyence, Cognex, Omron)

DC Controls Technician Resume Examples & Samples

Statistically interpret and improve automated system’s performance parameters, at macro/micro level. 50%
Perform Preventive Maintainance for controls and systematize electrical/control parts inventory. 15%
Coordinate with vendors, installation of electrical or controls; as instructed. 10%
Maintain accurate record keeping such as: work orders, timesheets, parts requests. 5%
Maintain parts procedure and inventory control 5%

Controls Technician Resume Examples & Samples

Leads troubleshooting of production problems on a timely basis until successful resolution including major and minor maintenance of automated and non-automated equipment (making, finishing) through computer terminals, control panels and/or by manual means in the manufacturing of Colgate-Palmolive products (including electrical wiring, process and program analysis)
Recommends, decides and implements actions under daily operation pressure to drive production lines performance
Provides technical support on capital projects
Is the first point of contact in case of electrical and control systems malfunction on production lines
Develops and delivers training for operations team and co-workers
Delivers against maintenance KPIs
Works with Control Systems Engineer to establish, review, improve and execute plant control system standards including PM tasks
Undertakes daily reporting and updates of information systems (SAP, OPERA, Cycle Counts) including documentation of maintenance activities performed on equipment
Participates in new equipment installation, validation and start up processes
Supports Failure Investigations in respective areas
Replaces electrical equipment when needed
Accurately and fully completes all regulatory and compliance related documentation and procedures; highlights variances
Stays abreast of teams’ production performance via visual, written and verbal communications
Participates in regular review of team production performance and uses information to drive continuous improvement. Provides status of maintenance activity for line/area; recommends machine modifications
Seeks and applies Continuous Improvement tools and techniques to achieve team goals e.g. Quality Systems, Total Productive Maintenance, Problem Solving tools
Follows all Environmental, Occupational, Health and Safety requirements
Follows all Quality, Good Manufacturing Practices and Micro Cleaning & Sanitization Guidelines and standards
Understand the needs of both internal and external customers. Internal customers include Quality, Planning, Maintenance, and Finance. External customers are other Colgate plants, customer service and, for example, Target, WalMart etc
Maintains work area to required housekeeping standards. Performs housekeeping activities as per established protocol and conducts/participates in area housekeeping assessments per requirement
Other job functions that may be assigned
Technical Certification or equivalent work experience
Capability to troubleshoot, edit and modify programs for

Electronic / Controls Technician Resume Examples & Samples

Performing job responsibilities with a commitment to Unit safety policies and procedures
Repair and troubleshoot plant controls and processes
Install and maintain Process MMI and IT computers
Technical support for shift electricians
Support Plant Fire Suppression System
Assist with new equipment planning, engineering, programming, installation and modification
Associate’s Degree in E.E.T. or equivalent education and experience in Industrial Electrical work
Stable employment history with a minimum of five (5) years experience in Industrial Electrical work with no higher education
A minimum of two (2) years experience in PLC control systems
Good working knowledge of
Journeyman Electrician or greater certification
Experience with SAP or equivalent enterprise experience
Instrumentation experience such as load cells, thermocouples, RTD’s, etc

Controls Technician Resume Examples & Samples

Troubleshoot equipment and process problems as required
Service, maintain, repair, install and test equipment in accordance with current machine specifications
Create and modify electrical drawings, process & instrumentation diagrams and schematics as required
Procurement and ordering of spare components, provide justification for orders
Troubleshoot networks for communication issues
Utilize software to make basic changes to logic
Interface with suppliers and contractors on a technical level as required for the purpose of troubleshooting and debug
Improve PMS when diagnosed through breakdowns or Continuous Improvement
Knowledge in the following software packages: Allen Bradley RSlogix 500, 5000, Factory Talk View Studio, Allen Bradley Panel Builder32, Omron CX-Programmer, Omron NT-series Support Tool an asset
Knowledge of PLC/HMI programming and troubleshooting along with Robot programming and troubleshooting is an asset
Knowledge of and experience with panel building
Previous experience and exposure to robotics (ABB, Motoman) an asset
Proficient in Microsoft Office (Word, Excel, PowerPoint, Outlook)
Receptive to feedback, willing to learn and embrace continuous improvement
Willingness to build strong working relationships and contribute to a positive work environment
Must be respectful, approachable and team oriented

Controls Technician Resume Examples & Samples

High School Diploma or GED required
PLC certification from vocational school or community college preferred
Technical Associates Degree preferred
2+ years experience with industrial control systems
Must have proven experience in PLC logic and programming
Must be able to create and read logic and flow diagrams for program design, programming, simulation, testing, and start-up
Experience with control instrumentation
Proficient in MS Windows and knowledge of UNIX operating systems; working knowledge of computerized maintenance systems (CMS)
Must be able to clearly and accurately communicate verbally and in writing to various parties
Must be able to read electrical schematics and create them in AutoCAD or other design software
Must have knowledge of electrical controls and be able to specify materials, codes and red line drawings
Experience with motor control using VFDs preferred
Experience with Allen-Bradley, Parker and/or Siemens logic and programming preferred

PLC Controls Technician Resume Examples & Samples

Monitor and maintain the Baggage Handling System (BHS) and component systems including equipment control systems, computer systems, PLC systems, VFD systems, ATR systems, conveyor systems, sorters, scanners, and monitors
Provide troubleshooting, repair, and preventative maintenance of PLC controlled baggage, conveyor systems, and related equipment, components, and systems, and passenger boarding bridges and associated equipment
Provide concise, accurate, and sufficiently detailed data for input of all maintenance information
Perform mechanic duties including mechanical, electrical, pneumatic and hydraulic troubleshooting, and repair of conveyor and control systems
Provide leadership in supporting the Site Manager in oversight of the performance of BHS system operations
Drive and operate different equipment such as golf cart, company vehicles, forklift, etc
Support the operations with clearing bag jams
Assist with the development and ensure proper input of the maintenance data into the computerized maintenance management system
Respond to maintenance calls when required and/or requested

Controls Technician Resume Examples & Samples

High School Diploma or GED required; 2-year degree from a technical college or minimum of 5 years on-the-job training with heavy industrial manufacturing facility in skilled trade capacity preferred
Minimum of 5 years maintenance experience in a manufacturing environment preferred
Quality of Work

Controls Technician Resume Examples & Samples

Become the equipment expert and the primary support for Manufacturing regarding equipment and process issues, including (but not limited to) equipment downtime and production of nonconforming product
Identify opportunities for technical improvement and become a mentor to the existing Technical Support Team members
Provide technical assistance with new equipment, process development, setup, debug and training, particularly as it relates to automation and electronic controls
Must adhere to and ensure that all safety procedures are maintained in accordance with industry standards (OSHA, NEC,ANSI, IEEE)
Proficient in electrical systems up to 480 VAC

Controls Technician nd Shift Resume Examples & Samples

Troubleshoot line control problems via programming software
Install, calibrate, and maintain analog transmitters
Maintain, install, and troubleshoot variable speed drives
Tune PID control loops
Adjust programmed recipes as requested in the batch system
Create and maintain controls documentation using Microsoft Office
Assist IT with networking and process computer issues
Monitor and maintain applications on manufacturing servers
Work with mechanics to diagnose and prevent downtime
Knowledge and ability to utilize programming software including Rockwell RSLinx, RSLogix 5, RSLogix 500, RSLogix 5000, Panel Builder 32, RSView, GE Cimplicity for Fanuc PLC, etc
Familiarity & ability to maintain various PLC units including AB Micrologix, PLC 5, PLC 500, Compact Logix, Control Logix and GE Fanuc PLC units
Familiarity & ability to maintain various panel view and FactoryTalk HMI
Working knowledge of analog control equipment calibration and setup
Working knowledge of Batch control concept
Minimum of 3 years of controls technician, project engineering or related maintenance experience, required
Strong interpersonal skills, written and verbal communication skills, and the ability to effectively communicate throughout all levels of the organization
Solid analytical skills using tools such as statistics, downtime tracking, mechanical history, project planning, etc. to identify opportunities
Ability to use innovative approaches to resolve complex problems
Strong computer skills, including a proficiency in Microsoft PowerPoint, Excel and Word
Ability to quickly come up to speed on complex production processes
Ability to analyze data and information, and to make effective and timely decisions
Ability to work with others to identify opportunities
Ability to work under pressure and to react to situations with a strong sense of urgency
Solid problem solving, project management, multi-tasking and prioritization skills
Detail oriented, organized, reliable and resourceful
Ability to work effectively both independently and within a team environment

Controls Technician Resume Examples & Samples

Responsible for the installation, set up and programming of new equipment including electrical conduit, wiring, etc
Design, Test, and Implement PLC and HMI Programs
Read and safely modify wiring diagrams and schematics

Maintenance Controls Technician Apprentice Resume Examples & Samples

AC motors and controls
Troubleshooting, testing and commissioning systems and electronics
Reading and understanding mechanical plans and wiring diagrams
Properly addressing TCP/IP networks and other communications
Analyzing and correcting communication issues
Servo Systems support through troubleshooting, maintaining, and programming (Indramat, Reliance, Allen Bradley, and Yaskawa)
Human-Machine Interface (HMI) support and development (Allen Bradley, CTC, Wonderware, and TCP)

Third Shift Maintenance Controls Technician Resume Examples & Samples

Programmable Logic Controls (PLC) troubleshooting (Allen Bradley and Siemans)
Fieldbus support and development (Profibus, Device Net, Control Net and Ethernet IP)
Understand, support, and troubleshoot plant specific equipment (K-Trons, Micromotions, Acrisons, Scales, etc.)
Work to constantly improve the Plant through cost-saving ideas, process improvements, and business simplification ideas
Practicing under a Good Manufacturing Practices Regulatory Food Safety Program
Perform maintenance activities on a shift basis to ensure optimum utilization of materials and manpower to maximize production safety, quality and efficiency
Review work orders to ensure materials are available and develop manpower and scheduling estimates. Initiate work orders when work cannot be performed immediately
Actively participate in team and plant meetings and activities
Perform preventative maintenance and inspection functions and take the initiative to ensure these programs are modified and updated as needed
Knowledge of proper lifting techniques. Ability to lift a minimum of sixty pounds
Strong mechanical aptitude combined with good diagnostic skills
Excellent technical skills and knowledge of all crafts, including electronics, electrical, Programmable Logic Controls (PLC) and Human Machine Interface (HMI)
Good problem solving, troubleshooting and creativity skills
Ability to follow rules and procedures
Demonstrated ability to work in a team oriented environment
Timely and accurate communication skills
Willingness to make decisions, act upon them and accept accountability
High initiative
Basic safety knowledge
Ability to interact cross-functionally
Basic computer skills- Microsoft Office Suite
Standing- 6-8 ½ hours in 8-12 hour day. 4 hours overtime, possibly 3 days in a row. 10 ½ hours standing maximum
Sitting- 1 hour in 8-12 hour day
Lifting- 40-50 lbs knuckle to waist, 25-40 lbs waist to shoulder. 3-4 hours/day
Lift / Pull- Clear bag & case jams from machines, overhead conveyors, & palletizers. Pull pallet jacks loaded with parts. Lift & load buckets of lubricant. Pull & lift grinder cradles & screens. 2-3 hours/day
Push / Pull- On wrenches, pry bars, valves, cases of product. Shovel & sweep product from floor. 7 hours/day
Carry- Tool pouches approx. 25 lbs
Climbing- Stairs to Bins, Bin Tops, Mill Tower, Crow’s-nest, Mezzanine. Ladders, including extension and stepladders to work on equipment throughout plant. 2-3 hours/day
Balancing- Climbing portable ladders. Reaching to work on equipment. Walking across uneven surfaces on bin tops & equipment. Carrying long pieces of blow line, ladders, and other equipment up stairs. 7-8 hours/day
Walking- To all area of plant. 4 hours/day
Stooping- Working on or under equipment, lifting cases of product, or parts. Inspecting equipment. Cleaning work areas. Changing hammers and pins. 6-hours/ day
Kneeling- Work on equipment. 2 hours/day
Squatting- Work on equipment. 2 hours/day
Reaching- To obtain parts from shelf. Work on equipment. 6-7-hours/ day
Handling- Inspecting & handling equipment, use tools. Completing paperwork. 6-7-hours/ day
Feeling- Inspecting & working on equipment. Handling small parts. Working in blind areas
Twisting- Inspecting & working on machines, driving fork trucks, hand stacking product, clearing jams in Pkg. equipment, shoveling. 3-4 hours/day
Talking- Communicate with co-workers and off shifts, using some sign language in noisy areas. Talk over noise of machines. Use 2 way radios. 1 hour/ day
Hearing- Machine repair, alarms, operates equipment & fork trucks, Communicate with co-workers in person and over 2-way radio. 7 hours in noisy areas
Noise- Hearing protection required in all production areas
Sight- Safety glasses required in all production areas. Some work areas have very limited light (flashlight). Communicate using hand signals. Operate equipment, monitor product, paperwork

Controls Technician Resume Examples & Samples

Familiar with state of the art technologies in the following areas: control systems integration, controls architectures, PLCs, motion control systems, electro-mechanical drive systems, robotics, part sensing, vision, risk assessment, and safety systems *
Possesses an understanding of general mechanics and ability to apply it in troubleshooting and system design
Self starter who is able to exceed expectations for their objectives and timelines with a minimal amount of supervision
Sound problem solving and decision making processes and skills
Highly motivated, results oriented, customer focused, with a high commitment level
Allen Bradley PLC & machine/ motion control experience

Building Controls Technician Resume Examples & Samples

Travel to construction sites to perform point to point checks
Troubleshoot and repair automation using PLC programs and dignose current electrical layout
Troubleshoot and provide preventative maintenance

Controls Technician Resume Examples & Samples

Builds electrical assemblies from schematics and drawings, including control panels, cables, and electro-mechanical sub-assemblies
Works with team of electrical and mechanical engineers and technicians in the assembly and testing of custom automation systems
Installs cables and field I/O wiring on machines in accordance with schematics and drawings
Wires main power cables, robot controllers, motors, UPSs and other AC devices at up to 480VAC 3Ø
Installs various assemblies that require electrical wiring, e.g. monitors, keyboards, mouse’s, and task lights
Assists with machine start up and testing
Assists mechanical technicians with mechanical assembly and testing as assigned
Stay current with applicable industry and customer electrical standards
Provides general assistance in the installation and repair of machinery at customer’s facility
General understanding of industrial control systems, especially servo motion and robotics
Skilled in interpreting mechanical, electrical and pneumatic drawings, diagrams, and schematics
Skilled in the use of basic hand and power tools, especially wrenches, screwdrivers, pliers, cutting tools, measuring tools, drills, and grinders
Experience with basic electrical troubleshooting; including use of a digital multimeter
Knowledge of common electrical sensors, including optical, pressure, vacuum, and proximity sensors
Good quality soldering skills
Good written and verbal communication skills in English. Good documentation skills
Ability to work both in a team environment and also independently
AS degree in electronics or equivalent are required for this position
Three to five years’ experience in the building, maintenance, or installation of capital equipment is required. A combination of experience and training (military, relevant associate’s degrees, etc) will also be considered
Working knowledge of electrical standards such as NFPA 79, NEC, UL508, and CE a plus
Experience with PC hardware and software and Windows 7 in an industrial setting is a plus

Controls Technician Resume Examples & Samples

Interpret and monitor mechanical and electrical installation checklists and schedules. Oversee, as appropriate, the usage of these systems
Procure and expedite materials for new or modified equipment
Specify or recommend vendors, and maintain close liaison between vendor and plant
Re-design electrical systems to reduce installation cost, solve equipment interferences, and correct inadequate designs
Prepare work orders and direct maintenance personnel and outside contract trades in the fabrication, assembly, testing, and installation of equipment
Create, review, and update installation documentation and drawings as required
Direct initial equipment set-up and debug up to the point of turnover to operations
Interface with all departments, as necessary, to ensure efficient use and operation of equipment
Redline existing drawings and follow-up with drafting services or oversee draftsmen as required to resolve design issues
Provide third-level troubleshooting support, directing contract engineering techs, and trades as necessary to replace defective components and execute changes in design solve equipment/process issues
Provide troubleshooting support in assigned areas
Take personal responsibility for all aspects of overseeing equipment installation crews including direction and shift supervision as needed for Electricians and Mechanics during installation activities
Provide training to contract engineering techs, internal maintenance, and outside contract trades on new equipment installation procedures as required for successful execution of installation activities
Analyze and correct equipment installation practices to improve efficiencies, specifically directed toward enhancing installation schedules
Develop cost reduction plans for the improvement of installation projects
Provide sketches or marked-up drawings as dictated by project and evolutionary equipment needs
Complete documentation packages to meet customer requirements
Ensure updated documentation exists in assigned areas
Minimum of an AS or AAS in an electrical or controls discipline. BS Electrical Engineering Technology, BS Electrical Engineering is acceptable, but keep in mind this is a technician level role
Ability to work well with varied job requirements
Ability to work well with people essential
Presentation skills highly desirable

Project Controls Technician Resume Examples & Samples

Hands-on experience, at least 2 years, with Primavera Project Planner (P6)
Experience in setting up schedules
Hands-on experience with resource loading & earned value management systems
Must be able to demonstrate knowledge of principles and concepts of cost as they relate to budgeting, monitoring and tracking actual costs, change orders and forecasting
Experience with Excel, PowerPoint Software
Excellent follow-up skills
Ability to work independently and meet critical project deadlines

Controls Technician Resume Examples & Samples

Familiar with state of the art technologies in the following areas: control systems integration, controls architectures, PLC’s (Studio5000 or RSLogix5000), motion control systems, electro-mechanical drive systems, robotics, part sensing, vision, risk assessment, and safety systems
1 year min of PLC or Robot programming experience
Allen Bradley Controllogix PLC & machine/ motion control experience

Ride Controls Technician Resume Examples & Samples

Maintain, erect, repair and troubleshoot rides and attractions following Manufacture and Engineering specifications to insure their safe and efficient operation with minimum supervision.Inspect rides and attractions and notify management and or Engineering of any hazards, defects, and ride or guest related problems that may endanger the guest, staff and the general public
Keep all records and documentation updated daily, accessible and organized.Insure that manufacturer's specifications, procedures, and State Regulations are complied with and documented
Maintain OSHA Safety Standards and other policies and procedures of Six Flags, Inc. and Six Flags America
Communicate with the various Maintenance departments to maintain a productive and satisfying work environment
Must possess the ability to stand for long periods of time, climb stairs and ladders repeatedly, bend, stoop, twist, crawl, kneel, push, pull, and work overhead using both hands. Assist in ride evacuations, lift fifty pounds without injury and work in the elements
Possess the ability to work at heights above 200 feet or more above grade
Conducts winterization and winter maintenance of computerized ride control systems and electrical equipment in the park
Assist in installation, remodeling, retrofits and rehabilitates rides and buildings as needed
Responds to work orders and ride downtime calls in a timely manner
Industrial electrical experience preferred
Must have thorough understanding of Allen Bradley PLC's, Allen Bradley and ABB AC/DC motor drives, and other electrical equipment theory and operation
Diagnoses electrical problems, initiates required repair work, ability to understand ride monitoring equipment, relays, switches, limiters, transformers, etc. and maintenance as required
Trouble shooting skills to the board and device level.Operational knowledge of electrical test equipment (i.e. mega/micro ohm meter, volt meter, current meter, and other various pieces of test equipment
Analyze and repair malfunctioning park electrical equipment and systems.Must be professional, energetic, self-motivated, ability to motivate others, and have a positive attitude
Flexible scheduling including nights, weekends and holidays a must
Must possess a valid driver's license and a clear driving record
Strong work ethic with the ability to work well under pressure and multi-task
Medium voltage experience a plus
Maintains and repairs park lighting and fixtures
Installs electrical conduit and wiring; cleans electrical equipment and components; maintains controls on rides; maintains ride lighting
Conducts preventative maintenance on rides, computerized ride control systems, electrical utilities and equipment
Performs daily inspection, maintenance and repair computerized ride control systems, electrical utilities and equipment in the park and other equipment as needed

Controls Technician Resume Examples & Samples

5-7 years of recent related experience in Johnson Controls or facility maintenance
Strong familiarity of building codes and regulations
Current working knowledge of Controls systems and clean room Controls
Excellent communication & customer service skills
Ability work in a team oriented environment
Execute tasks in a timely matter with minimal supervision
Familiarity with building trade groups and work instructions
Safety minded
Proficient in Microsoft Office Suite#
High School graduate or equivalent experience required

Maintenance Controls Technician Resume Examples & Samples

Trouble shoots and implements modifications to existing electrical system which includes robotics, automation equipment and CNC machines
Coordinates with manufacturing engineers and production as required supporting equipment uptime
Ensures projects are completed within budget and on schedule, ensuring that the contractor follows all PACCAR Inc. safety requirements
Coordinates and support major maintenance, emergency repairs, and corrective actions on equipment and facilities
Maintains necessary records and documentation, preparing management reports as necessary
Implement and maintain computerized PLC and CNC equipment
Provide maintenance supervision support as needed
Continuous improvement working with IT department and integrated process monitoring systems
Follow plant’s standards for filing and maintaining documentation per ISO standards. Maintain up-to date machine design documentation for all machines
Support team to review engineering designs for manufacturing feasibility and recommends changes as necessary
Support team to prepare, manage, and implement capital budget projects as needed
Support Six Sigma projects as needed
Facilitate effective communication to plant management on project status
3-5 years related experience
Proven PLC and CNC programming and troubleshooting
Ability to work effectively in a high performance team based environment
Excellent proficiency in Microsoft Office suite of products
Familiar with risk assessments and safety evaluations
Ability to manage multiple projects with the flexibility to adapt to conflicting requirements
Knowledge of city, state, and federal electrical codes
Demonstrated ability to create and interpret electrical, pneumatic, and hydraulic schematics and ladder diagrams, function block diagrams, STL, FB to effectively trouble shoot systems
BSEE or equivalent Technical degree
PLC programming using Siemens Step-7 and WinCCFlex
Fanuc and ABB robots trouble shooting and programming experience
CNC programming using Siemens Step-7 Powerline and HMI Advanced
Knowledge of mechanical and safety codes
Knowledge of Profibus, Profisafe, Safety Integrated, and ASI-Bus
Hands on experience with Siemens HMI

Controls Technician Master Resume Examples & Samples

With administrative support from the Projects Team, may manage all aspects of small / noncomplex
Manages assigned work to meet professional and efficient execution of time and customer
Adheres to all Johnson Controls and customer safety standards. Provides safety leadership
Compiles all job documentation, such as certificate of completion, customer training form,

Controls Technician Resume Examples & Samples

Understand and be proficient in all controls systems within Tenneco. PLC’s, HMI’s, Servo Motors & Drives, Robotic controllers, Camera systems; Safety devices such as light screens, area sensors; Electrical and Fluid Power schematics; VFD’s, Relays, communication networks,
Work within team to provide controls logic support to new model activities as well as troubleshoot and maintain current production equipment and processes
Identify and diagnose production tooling and equipment problems to automated equipment and correct problems and improve manufacturing operations
Evaluate and provide input for assembly, tooling, and equipment prints for existing and new program changes; especially where automation is present
Monitor and understand electrical and controls systems based on Tenneco standards
Resolve operational problems related to projects and minimize delays or unexpected cost occurrences
Ensure all relevant safety objectives and legal requirements are observed for all work completed
Update documentation such as user manuals, programming diagrams, network diagrams, and electrical drawings
Maintain accurate records and files according to quality standard
Assist in technical training of teammates where appropriate
Flexibility in working traditional and non-traditional work hours as required
2 year technical or associates degree preferred
3-5 years related job experience preferred
Proficient with MS Office, Allen Bradley RSLogix 5000 & 500, Keyence and Cognex Camera systems Robot programming
Strong fundamental knowledge of control and electrical system design and its application in automated industrial designs including specification of vision, power, sensor, inspection, and communications systems
Efficiently organize and plan work tasks to meet company goals
Critical thinking with exceptional problem solving skills, able to work independently and in team environments
Proactive, resourceful & highly motivated with good communication skills and ability to work in high output environment
This list may not be all-inclusive and may include other duties as assigned by the supervisor

Controls Technician Resume Examples & Samples

Minimum of an AS or AAS in an electrical or controls discipline. BS Electrical Engineering Technology, BS Electrical Engineering is acceptable, but keeps in mind this is a technician level role
Minimum 5 to 10 years experience
AutoCAD® 2014, AutoCAD Electrical 2014, Windows7, MS Office suite including Power Point, Excel, Word
PLC and PC based systems, Beckhoff PLC / Motion Control, B-R Control, Automated equipment systems experience

BAS Controls Technician Resume Examples & Samples

Perform and supervise the installation methods, startup, checkout and commissioning primarily on temperature controls, DDC and energy metering in a commercial, educational, construction and or retrofit environment
Oversee and coordinate the technical aspects of a project including control drawings, sequences, system architecture, system commissioning and customer training
Have an understanding of electrical circuitry, construction environments and safe work practices
Ability to read and interpret architectural, electrical, mechanical and control drawings
Responsible for ownership of coordination with subcontractors/vendors as applicable and with customers to obtain completion sign-off
Plan, schedule and communicate job details with project manager
Keep all project documentation and paperwork up to date
Able to manage multiple priorities and deadlines
Work with and without direct supervision
Demonstrate the 12 Honeywell behaviors; especially Growth & Customer Focus, Getting Results, Effective Communication, and Technical or Functional Excellence
Able to work flexible hours to accommodate project and client requirements
Technical Certification or Associate Degree in Mechanical, Electrical or Control systems or a HS diploma/GED with a minimum of 2 years of working experience with mechanical, DDC and HVAC control systems
2 years Windows networking experience
3 years experience with mechanical systems, automation controls, interpreting plans and specifications
Minimum 2 years experience with software/sequence programming
Demonstrated ability to use hand tools and test equipment
Working knowledge of personal computers, computer based tools and network systems
Experience with IP, networking and wireless technologies
Experience with systems that involve advanced solutions such as EBI, Tridium, Alerton, Echelon, BACnet and other open technologies
Ability and willingness to travel both locally to project sites with overnight up to 25% as work load demands

Power Plant Controls Technician Resume Examples & Samples

Responsible for servicing generators, to include changing filters, changing oil, changing coolant, adjusting fuel injectors, valve lashes and all other tasks given by the lead mechanic
The Power Plant Engine and Controls Technician operates, maintains, and digital and electrical systems in the power plant
Using practical experience in engines and/ or electrical systems
Performing work with engine overhauls, PLCs, computers and other digital systems
Working with tools and electrical measuring meters of the trade
Theoretical knowledge and functional/operational work experience of power generation, control room, various size generators (CAT 3512), (CAT 3516), alternators CAT 1MV, 24vDC to 15kVAC power generation-distribution grid, GE and Siemens systems, PLC and electronic controls, switchgear, step-up and step-down transformers, substations, fusible switches, SCADA system and automatic transfer switches
Responsible for assisting with data collection and record keeping of various systems in operation according to prescribed schedules
Interprets system operation readings and assists with making recommendations for needed corrective actions
Responsible for mechanical, electrical and PLC related operations & maintenance
Responsible for assisting with the scheduling and direction of O & M work involving mechanical, electrical, electronic systems to support multidisciplinary engineering operations
Responsible for assisting with the preparation of purchase orders for equipment, parts and supplies as well as coordinating receipt and storage of material
Responsible for timely compliance of established policies and procedures, including environmental-health safety policies for a safe work environment
Maintains effective, timely and respectful communication with customers
Creates and fosters professional environment for employees and supervisors to achieve highest level of customer service standards
Assists Lead Mechanic with supervising staff and provides effective leadership, team building and consensus building skills with colleagues, supervisors and subordinates
Must speak and understand English, read, write and be able to communicate in a professional manner
Must know how to use internet
Must have at least 2 years of schooling in a mechanical trade, diesel engines, controls and electricity
Mechanical and electrical background in power production and distribution
3 years in operation and troubleshooting of diesel power plants preferred
Hands-on knowledge (minimum five years’ experience) in the operation & maintenance of switchgear controls, distribution switchgear, simple electrical circuits, AC and DC theory, PLC’s and ladder logic, basic electrical formulas, transformer functions, motor controls, and Microsoft WORD, Excel and Outlook applications
Willing and able to work different hours to meet operational need as well as be able to understand ever increasing customer need to achieve highest customer satisfaction. Performs customer care related functions as assigned
Ability to work in a group of employees with diverse socio-economic background, religion, nationality, ethnicity, language and cultures is essential. Must be able to assist with the oversight and coordination of multiple workers with different tasks
Higher level of interpersonal skills and above average communication skills are required to manage and coordinate variety of tasks, trades and personnel
Responsible for attending and participating in department meetings. Identify department risk/liability concerns and forward to Lead
Maintain positive working relationships with DoS contacts, suppliers, installation contractors and other engineering consultants
Must be able to read and interpret all forms of building and engineering plans in English

Project Controls Technician Resume Examples & Samples

Bachelor's degree in unrelated field. Applicable experience may be substituted for the degree requirement
A minimum of 1 year direct project controls experience
Ability to work independently, think creatively and analytically, and make quick and sound decisions
Experience with one or more project controls software or tool preferred
May be required to obtain an OSHA 10 hour safety certification

BMS & Smoke Management Controls Technician Resume Examples & Samples

Excellent working knowledge and implementation of AS1668
Thorough understanding of mechanical plant and smoke exhaust systems including the interfacing and control there of
Thorough understanding of Ampac Fire Alarm Systems and the installation and system design in respect to smoke management
In depth knowledge of the smoke exhaust system controls to be able to diagnose, determine and rectify faults
Understanding of HVAC and control systems and how they link in with Smoke Management systems
The ability to work to deadlines in a very intense working environment
High performer with exceptional people skills and excellent communication skills

Controls Technician Resume Examples & Samples

Support manufacturing engineers on their projects as directed by the Controls Engineer
Build electrical panels, program/debug PLC programs for new projects
Support the existing manufacturing equipment (PLCs, HMIs, VFDs, Servos, Hydraulics, Vision, etc.)
Diagnose, troubleshoot and repair electrical components
Experience with Compact/ControLogix PLCs as well as RSLogix 5000 software
Experience with Cognex Vision and Keyence Vision systems
Experience with motion control and drives
Must be a team player with a positive attitude

Industrial Controls Technician, Days Resume Examples & Samples

Manages the inventory of spare parts
Must be willing to work extended hours as needed in order to meet productivity goals
Strong technical and operational knowledge of mechanical electrical and electronic equipment and systems

Controls Technician Resume Examples & Samples

Technical College or equivalent work experience in the field of electronics and controls
Advanced understanding of machine automation and control logics
Working knowledge of, and ability to program, various PLC equipment
At least 5 years progressive work experience with sophisticated controls systems and logic programming
Food industry experience preferred but not required
Able to read, write and speak English – bilingual Spanish a plus
Bending, stooping and lifting up to 50 pounds

Controls Technician Resume Examples & Samples

Assures that General Safety and Food Safety is an absolute priority by setting the example as a member of senior management
Provides hands on technical support for PLC’s / electrical repairs
Analyzes problems on equipment and supervises needed repairs. Interprets technical information to ensure proper repair
Works with Maintenance department to schedule necessary repairs to meet the needs of production equipment
Works with Plant Engineers to establish goals and objectives for the Maintenance Department. Assists in communicating goals to the team, trains and motivates maintenance personnel to achieve departmental goals
Works closely with the Engineering Clerk to assure parts ordering and inventory is adequate and available
Assists in all required audits and inspections and corrects maintenance deficiencies
Works with outside contractors as necessary to safely perform job to company specifications
Works on special projects assigned by Plant Engineer and/or Plant Manager

Electronic Controls Technician Resume Examples & Samples

Work closely with Controls engineering and production areas to ensure equipment is operating at targeted efficiency and quality goals
Work from a prioritized list of controls projects and modifications in coordination with engineering, quality, and production departments, insuring focused continuous improvement
Proactively find and implement process improvement opportunities to resolve manufacturing equipment’s design, safety, and process issues with existing and new equipment
Timely documentation of work projects and breakdowns, and documentation of modifications to production equipment control systems
Self learning of current equipment and control technologies related to Molex manufacturing processes, using documentation and departmental resources
Support equipment design reviews and FMEA’s to provide effective processes for new builds and existing equipment
Research new equipment and control technologies that will assist us in providing more competitive manufacturing services
Serve as a contributing member on manufacturing teams, reviewing controls issues as required
Maintain a safe work environment and good housekeeping practices
Understand, support and contribute to current Molex MBM culture and Quality and Environmental systems by following stated policies and procedures

PLC / Controls Technician Resume Examples & Samples

Installing, troubleshooting and repairing industrial electro-mechanical and control systems
Diagnosing the causes of electrical or control malfunctions, equipment or system failures, repairing and replacing defective components
Initiating improvements to equipment and processes
A technical or vocational degree and a minimum of two years of industrial equipment PLC/controls experience
Demonstrated experience in AB ControlLogix PLC’s, VFD programming, Servo and machine control systems
The ability to work in a standing production environment with frequent bending or reaching and exposure to dust, odors, and loud noise
Flexible to work overtime, off shifts and weekends as required

100

Electronic Controls Technician Resume Examples & Samples

Trouble-shoot and repair electro-mechanical equipment problems throughout the plant
Responsible for the plant PLC systems
Perform Preventative Maintenance on assigned equipment
Recommend needed improvements and upgrades to keep plant current with technology
Write programs for controls and operator interface screens for new projects and equipment upgrades this include Panelviews, Panelview Plus and misc HMI’s
Train others basic PLC skills
Properly document work performed

101

PLP Controls Technician Resume Examples & Samples

Technical resource as related to electrical and control requirements. Will be required to assist other manufacturing departments relating to electrical controls, PLC programming and applications, electrical design, start up and overall support
Interface with senior level management at meetings, PPI Groups, Engineering Manager and Finance Manager
Control system design and implementation experience relating to all phases of electrical control as used in a manufacturing environment. This includes but is not limited to building operations, process controls, utility monitoring and reporting and process control and monitoring
Utilize continuous improvement tools, including but not limited to TPM, Failure Modes and Effects Analysis and support LEAN efforts, including PPI and Kaizen
Evaluate the requirements to determine what current equipment and processes can be used or if new equipment/upgrades are needed
Work independently or with maintenance assistance as required to carry out the above requirements. The person will be viewed as an individual contributor and will be required to work independently to resolve issues
Establish timelines, work on Teams, develop Teams and train lower level Maintenance Techincians on PLC troubleshooting and basic programming
Interface with other departments as a resource in the development of new products, policies and procedures
Must supply your owns tools as related to you field and areas of responsibility
Train maintenance personnel on PLC and industrial controls
Flexible schedule with call in responsibilities, company supplies cell phone for on call support
High degree of accuracy required and detail oriented
Basic electrical experience

102

Electronic Controls Technician Resume Examples & Samples

Support the process of quickly translating new and raw ideas into “looks-like” and “works-like” prototypes
Participate on cross-functional teams to develop new products and/or innovate existing products
Conceive and execute product concepts using software and hardware
Desire to dive deep on new technologies as required
Good understanding of various platforms and technologies (Android, Arduino, Rasberry PI, Java, Python, AJAX, C++, and others) to create prototypes and reference code for proof-of-concept, demonstration and testing of solutions which combine existing technologies in new and unique ways
Work with design leadership and key stakeholders to realize prototypes that feel real, explain and prove user concepts for next generation experiences
Gain a familiarity with all types of product applications, company products, and the organization
Demonstrable ability to create highly engaging prototypes in both the software and hardware domains
Must be highly proficient in Java, C++, HTML5/CSS3/Javascript or related
Experience building prototypes and tools in Java and HTML5/CSS3/Javascript that communicate with SQL, JSON, XML
Proven ability to innovate within and extend current technology through prototypes
Strong conceptual and problem solving skills
Good development and design sensibilities
Minimum of five years of experience working with various Briggs & Stratton products and components which may include small/large engines, engine powered equipment, etc

103

Direct Digital Controls Technician Resume Examples & Samples

Apply intricate knowledge of how the BAS systems interact with facility components to ensure operation as designed. Ex: Fire alarms, lighting, security and mechanical systems
Diagnose/repair control and direct digital control (DDC) hardware to include sensors, control valves, actuators, network controllers, computers and software
Perform programming on operating systems utilizing LonWorks protocol
Read and interpret work orders, parts requests, drawings, schematics, blueprints and manuals in order to operate equipment and perform periodic maintenance on BAS and shop equipment
Perform other duties as assigned in accordance with contractual, functional and mission requirements

104

PLC Controls Technician / Nights Resume Examples & Samples

Oversee or perform general housekeeping
Experience with electrical systems (installation, frequency drive, troubleshooting)
Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting)

105

PLC Controls Technician Resume Examples & Samples

Offer support and troubleshooting assistance to Engineers, Team Leaders, and all Maintenance personnel
Interface as needed with the IT Team to resolve problems and support projects and equipment
Suggest process improvement upgrades and/or device upgrades
Microsoft and database computer experience
Ability to meet business needs and deadlines reliably
High PLC programming experience, with excellent troubleshooting skills
High school diploma/GED/Technical school experience and equivalent work experience. Associates degree or trade license is preferred

106

Controls Technician / Engineer Resume Examples & Samples

3-5 years controls experience
AutoCAD 2-3 yrs. minimum experience
Prefer a 4yr degree but will look at experienced candidates
Have ability to install and setup onsite, troubleshoot when problems arise, and be able to work with customers directly
3 Weeks a year Travel

107

Test Controls Technician Resume Examples & Samples

Be able to obtain and maintain permission to operate customer-owned vehicles for the purpose of moving materials and parts in support of work activities
Possess and maintain a valid driver's license, automobile liability insurance and successfully complete a company defensive driving training class
Demonstrated experience maintaining non-infrastructure computers and related IT security plans in accordance with NPR 2810.1 and MPR 2800.2 or equivalent
Have demonstrated experience troubleshooting and repairing PC-controlled control systems similar in scope and complexity to the Materials Test, Tribology, and Chemistry & Contamination Team equipment
Be able to work hands-on with machine tool-like equipment involving electrical, pneumatic, hydraulic and mechanical components and systems

108

Controls Technician Resume Examples & Samples

Troubleshoot, Install and Repair automated production equipment, to include Applications, Data/Information, Electrical, Robotic Programming, Electrical Controls and PLC Programming. Responsible for the technical support of Robot and PLC based hardware and software
Performs advanced level troubleshooting on Automated Equipment by using and understanding Electrical, Mechanical, and Pneumatic drawings and schematics, and using special test equipment and tools. Document all emergency, corrective, and preventive maintenance work via work orders associated with Computerized Maintenance Management System (CMMS - MAXIMO)
Plans and Implements automated equipment related new ideas and processes. Works with Developers, Designers and Production Engineers to improve quality of processes and/or machines, analysis of design and implementation of technical products and systems. Communicates with management on project goals and status. Drives change
Participates in continuous improvement studies, statistical analysis and functional reviews of unit operations. Operates onsite in an on-call capacity. Performs other assignments and special projects from the Development, and Sr. Engineering teams
Works with Developers and Vendors to provide expert judgment and analysis regarding the design, development, and implementation of technical products and systems. Work as a Systems Coordinator to understand operating system and as a team member in the disaster recovery of automation equipment
Maintain fluent understanding of MM Automation system. Provide Controls training administration for EMT’s and Controls Specialist. Provide Controls training in the specific pharmacy programming applications
Ensures system availability by providing high level technical support. Contributes to the completion of milestones associated with specific projects. Failure to achieve results or erroneous decisions or recommendations may cause delays in program schedules and may result in the allocation of additional resources
8 - 11 years of Electrical and PLC Systems experience; Mechanical experience as related to automated equipment, experience with Pneumatics and experience working in a high volume production or pharmaceutical environment preferred. Will also consider 2-5 years experience with degree
Minimum of 5 years experience troubleshooting automated control systems in an emergency and corrective maintenance capacity within a production environment; programming and troubleshooting experience using RSLOGIX platform is highly-desired
Must be available to work evenings and weekends as needed; May include some travel to other sites and ESI facilities

109

Controls Technician Resume Examples & Samples

Strong knowledge of Rockwell software (Logix5000, NetWorx, RSLinx and Factorytalk Studio)
Proficient in PLC -- AB, ABB and Siemens. Experience in trouble shooting system issues using PLC required
Plan, prioritize, and complete work in most efficient and proactive approach while working in accordance with all city, state, and federal safety, environmental and electrical codes
Update records, prints and spare parts
Read and interpret electrical electronic schematics, wiring diagrams, instruments loop sheets and technical manuals
Troubleshoots and repair variable speed motor drive systems
Select and use all standard electrical/electronic and instrumentation test equipment (Multimeter, HART Communicator)
Modify control loops, movement and replacement of instruments, and additions and deletions to the system
Troubleshoot, repair and maintain instrumentation systems and components, including control valve systems
Participate in Corrective Action Plan development, implementation and follow-up as technical problems occur
Evaluate and develop improved techniques to reduce downtime and improve the life of equipment
Create and develop work instructions and deliver training to end users
Write work orders as needed to support area
Employees must follow all Johns Manville safety procedures and policies

110

Industrial Controls Technician Resume Examples & Samples

Plant support in troubleshooting/repairs and systems improvements (optimization)
Specify and order safety components (e.g. light curtains, safety relays, safety I/O blocks for PLC’s)
Keep current knowledge on PLC programming standards, robot safety, new safety components and materials, safety software for calculating reliability levels and other controls-related items
Establishes and follows-up full project implementation including timing, concept, feasibility, design, specifications, construction and commissioning
Plant support in testing, repairing, calibrating electric or electronic components
Maintains and upgrades all PLC related software: assist in training of staff on electronic equipment
Computer programming, AutoCAD, Office applications
Comes to work each day, as scheduled
Completion of post-secondary education, and eligible for registration as a C.E.T., with three years of electrical experience. Experience with various PLC and Industrial controls systems
Familiar with PLC programming and implementation (Alan-Bradly/Siemens)
Safey Circuit design, program startup, verification and trouble shooting
Microsoft Computer Operating system setup and maintenance
Proven ability to interact well with co-workers (Electricians, Millwrights, Tool Makers, Operators), and promote the “Team” attitude to troubleshoot and restore production flow

111

PLC Controls Technician Resume Examples & Samples

Troubleshooting and maintenance of Automation and Controls systems in a dynamic environment requiring minimal downtime of the machinery. Document symptom, root cause, solution and preventive recommendations
Fast response for troubleshooting to sustain machinery uptime when unscheduled downtime related to automation, controls, sensors, servos, VFS, and other electronic components occurs
Identification of improvements. Programming (minor modifications/configuration) to implement improvements in the PLC Logic and HMIs. Save, upload and download programs when modification/improvements are implemented
Redaction of GMP documentation such as change request, specifications red-lines and test scripts
Preventive/corrective maintenance for automation and control systems
Participate in projects as technical Subject Matter Expert
Read/develop/red-line electrical, instrumentation and communication drawings/sketches
Research and specify new equipment, sensors and parts to improve the process
Adjustment of pick points on robots
Execute equipment and control system modifications adhering to Pharmaceutical and Medical Devices GMP change control standards and policies
Train users and peers on control system functionality (programmable logic controller, computer/control networks, and instrumentation)
Support software life cycle efforts to maintain systems current
Knowledge and experience working with machine control systems including PLCs, servo controls, and Variable Speed Drives
Proficient in using personal computers and a working knowledge of software such as MS Excel and Word
Ability to analyze, investigate and help solve technical issues involving the equipment
Knowledge of Allen-Bradley, Siemens and GE PLCs
Must be flexible to work nights, weekends, and holidays as required
Must be a self starter and proactive
Ability to follow all safety and lock out procedures
Ability to provide technical support and assists troubleshooting equipment when unscheduled downtime occurs
Must have a strong background in machine maintenance and troubleshooting
Must have an understanding of cGMPs with experience in a pharmaceutical environment
May be required to travel both domestic and internationally, up to 25% of the time

112

Controls Technician Resume Examples & Samples

Bachelor's degree in Engineering, Engineering Technology, or Computer Science/Information Technology (IT) or degree in related field
Minimum 3 years of experience as a Controls Engineer, Programmer, or Technician required; experience working in a manufacturing facility is preferred
A strong knowledge of control system networks and communication protocols, knowledge of all required control system software applications, and the ability to troubleshoot an array of control system issues
Functional knowledge of manufacturing automation control system infrastructure and software; this would include the ability to read prints and diagrams, thorough understanding of control system design principles

113

Controls Technician Resume Examples & Samples

Operates and maintains natural gas compressor station, pipeline, and auxiliary equipment such as PLCs, electrical generators, air compressors, valves, pipelines, filters, scrubbers, etc. in a manner to meet operational needs in compliance with company and regulatory requirements
Perform installation, testing, repair and maintenance on natural gas facilities, pipelines as well as other associated equipment used in natural gas transmission systems
Troubleshoot equipment problems utilizing technical reference manuals and documents
Provide multi-skilled maintenance support with other technicians in the completion of pipeline, mechanical and measurement activities
Provide coaching, mentoring and training to other personnel
Manage and co-ordinate usage of third party contractors
Must have the qualifications, experience and ability to competently and efficiently perform the duties assigned
Highly motivated with interpersonal skills to effectively work in a collaborative team environment that includes shared responsibilities, establishing and maintaining effective working relationships with others, support team and company objectives, and a willingness to work in allareas required by the team
Must have the ability to complete tasks and assignments in a safe and environmentally responsible manner, ensuring proper handling and disposition of hazardous waste
Utilize computers and e-mail for internal and external communication, record keeping, on-line reporting, material and supply ordering, and filing of various forms
Must have a proven safe driving record and provide documentation of past traffic violations upon request
Minimum education of a high school diploma or GED
Electrical, Instrumentation, Controls, or Telecommunications technical training, apprenticeship program, or equivalent education or experience
Previous natural gas pipeline expertise and experience will be considered a strong asset
Be subject to call out 24 hours a day, 7 days a week and extended workdays and or workweeks including overnight stays away from home location, carry a pager and/or cell phone, and to work a rotating on-call schedule

114

Controls Technician Resume Examples & Samples

Integrate field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems based the system design package enabling a fully-functional equipment platform
Work closely with controls engineers to implement control sequence logic (both time-based and event-based), fail-safe states, and process /equipment recovery sequences
Implement specified field devices to accomplish desired process / equipment functions, and compatible / compliant with site standards
Accurately estimate timeframe to complete assigned project work once scope of work is adequately defined and then complete work to agreed-to timeline
Participate in engineering project teams that are responsible to deliver robust, cost effective automation and process machine systems to Corning’s manufacturing plants and processes
Work within project teams to support the solving difficult automation problems, resolution of project related issues, and development of fundamental understanding of technical / process requirements critical to system success
Drive the deployment of defined control architectures, control system standards, and system integration that will satisfy process and manufacturing requirements
Interface with external system integrators and machine builders to enable project deliverables
Actively participate in project fabrication, off-line integration and testing, drawings and documentation, installation, production start-up support, training of plant personnel, and technology transfer
Report to project leader on assigned project activities on a pre-determined basis
Minimum of an AS or AAS in an electrical or controls discipline
BS Electrical Engineering Technology, BS Electrical Engineering is acceptable
Required Years and Area of Experience
Experience integrating field devices for flow control, material handling and metering, motion control, temperature control, and associated safety systems into an overall controls package enabling a fully-functional equipment platform
Experience with PID control loop tuning and techniques
Experience working closely with IT & process engineers to implement control sequence logic (both time-based and event-based), fail-safe states and process / equipment recovery sequences
Experience with graphical user interface and human machine interface
Experience working within engineering project teams
Accurately estimates timeframe to complete assigned project work, once scope of work is adequately defined, then completes work to agreed-to timeline
Understanding of electrical design practices, machine / motion control systems, electro-mechanical systems, robotics, programming, and system integration
Demonstrated ability to support the development and delivery of fully integrated machine and motion control, automation, and process machine systems and solutions within a manufacturing environment
Ability to work in a team based environment and lead or participate on a highly matrixed team
Possesses an understanding of general mechanics and ability to apply that understanding during troubleshooting and system implementation
Must be able to program in ladder logic or equivalent
Experienced in the checkout and verification of electrical control panels
PLC and PC based systems, Beckhoff PLC / Motion Control, B-R Control, Allen Bradley, iFix SCADA, and Automated equipment systems experience
Manufacturing experience and ability to work in a manufacturing environment
Computer vision system experience
Experience with programming manufacturing systems using higher level programming languages
Works well in a fast-paced, plant start-up environment
Can acts and makes decisions for best interest of project
Strong written and verbal communications and overall people skills
Embraces a collaborative team environment
Resolve conflicts with peers, customers, etc

115

Controls Technician Resume Examples & Samples

2) Must be computer literate
3) Must be detailed oriented
4) Must have ability to work issues through to completion
5) Ability to effectively communicate with all levels, from operators, engineering and top management
6) Must be able to work alone as well as functioning in team environment member
7) A thorough working knowledge of PLCs HMIs, AC & DC drives and associated control systems in an industrial environment is required for this position
8) The successful candidate will possess the ability to perform detailed electrical troubleshooting based on electrical drawings
5 years troubleshooting in an industrial environment maintaining Allen Bradley Controllogix, iFix HMI, Yaskawa / Allen Bradley Drives
A thorough working knowledge of PLCs HMIs, AC & DC drives and associated control systems in an industrial environment is required for this position
The successful candidate will possess the ability to perform detailed electrical troubleshooting based on electrical drawings
Candidate must be computer proficient. AutoCAD experience is also desired
Must be self-sufficient and have the ability to work as a team member in a clean environment with high safety standards

116

Industrial Controls Technician Resume Examples & Samples

Work in accordance with safe work practices at all times
Coordinate projects with other plants and Engineering/Controls Specialists
Support Plant Operators, Mechanics, Peers and Management
Interact with Vendors, Suppliers and Systems Integrators
Work with Plant ISS Supervisors
Work with Corporate controls technician

117

PLC Controls Technician Resume Examples & Samples

Troubleshoot and repair control issues
Perform preventative maintenance to optimize equipment reliability
Follow-up on completed control work and assisting maintenance as needed
Train end-users and maintenance personnel on new controls designs
Assist in commissioning new controls
Update drawings as required, forwarding all equipment information to the planner/scheduler
Implement and maintain 5S standards
At least 2 years experience in a similar controls technician role
Associates or a 2 year degree in a maintenance related field or 2 years experience in industrial control system development and troubleshooting
Experience in schematic reading and PLC programming/troubleshooting
Must be able to speak, read, and write the English language
Must be able to work rotating shifts, off-shifts, weekends, holidays, and required overtime to support a 24 hour/7 day operation
Must be able to work 12.5 hour scheduled shifts
Ability to wear required personal protective equipment and comply with all applicable safety practices
Ability to maintain a clean work area according to good manufacturing processes
Good communication skills to communicate with co-workers and oncoming/outgoing shifts
Ability to stand, kneel, and walk for extended periods of time
Ability to work in hot, humid, and cold areas and tight spaces
Ability to use hand tools
Working knowledge of various equipment and plant processes to understand, interpret and schedule work orders
Knowledge of utility equipment and operations (boiler and refrigeration equipment)
Knowledge of government and industrial regulations (PSM, OSHA, and USDA)
Skills to perform basic and intermediate mathematical calculations

118

Controls Technician Resume Examples & Samples

Preferably 2+ years of experience working with automation assembly equipment within a high volume manufacturing environment
PLC programming experience with Siemens Step-7 and / or Allen Bradley RSLogixS00, RSLogixS000 and Factory Talk View (willing to learn - sharpen current skill sets}
Strong organizational, analytical and communications skills
History of progressive responsibility a plus
Solid interpersonal communications skills

119

EIC Controls Technician Resume Examples & Samples

Activities may include but are not limited to: Operation, maintenance and repair of pipeline, compression, gas process measurement equipment, control systems, end devices (pressure, temperature, vibration, gas and fire detection), telecommunications equipment, valves and operators, regulators, relief valves, blow down purging and pressurization of pipelines and stations, and performing line locates on company pipelines; all within company operating procedures
Actively participates in a team environment by acquiring and applying required qualifications, supporting the development of team members, performing administrative duties and assisting with planning, problem solving, prioritization and decision making processes
Analyze turbine performance reports, initiate corrective action to review and improve maintenance procedures
Read, interpret and update drawings and schematics (P&ID and electrical)
Properly use a variety of hand and power tools
Utilize diagnostic tools such as volt-ohm meters, ammeters, and oscilloscopes
Utilize computers to interface with various PLCs and controllers. Be familiar with various communications protocols, (RS232, RS485, and Ethernet over copper and fiber optic media)
Performs other tasks as defined by the team, and maintains general housekeeping and appearance of assigned team facilities
Experience with controls and measurement systems and instrumentation including but not limited to: pressure, temperature, flow, and vibration transmitters, gas and fire detection, pressure regulating equipment and valve operators
Ability to troubleshoot, operate and maintain turbine driven gas compressors, standby generators, oil coolers, air compressors, cooler fans and gear boxes, valves and operators and other auxiliary equipment
Effective written and verbal communication as well as interpersonal skills to work in a collaborative team environment that includes; shared responsibilities, establishing and maintaining good working relationships with others to support team and company objectives and a willingness to work in all areas i.e. controls, mechanical, pipeline, or measurement as required by team
May be required to travel to other company locations for temporary assignments, meetings and training involving some overnight stays away from home
Subject to call out 24 hours a day, 7 days a week and extended workdays and/or workweeks for emergency response purposes
Have and maintain a valid driver’s license
Travel to other company locations for temporary assignments, meetings or training which would involve some overnight stays away from home

120

Ride Controls Technician Resume Examples & Samples

One to three years electronic experience. Electric motors experience a plus
Ability to read schematics, working knowledge of electrical/electronic components and circuitry
Experience with panel building and wiring systems
Experience in programming and reading ladder logic
Ability to provide hand tools for daily use
Experience working with mechanics tools, torque wrenches and sockets
A willingness and ability to work varied shifts and schedules, including weekends
The ability to climb and work at various heights, some heavy lifting is required
Must have 3-5 years of experience and be willing to be part of our Team
Must possess a valid driver's license with a safe driving history
Must be able to trouble shoot relay logic systems
Must be able to troubleshoot clearly, calmly and safely in the presence of guests, co-workers and park management
Must be able to read, write and comprehend English
Must understand working on and around safety critical components
Must possess minimal mechanical knowledge to assist other team members
Must have tools and equipment to perform required duties and skills as defined above
Required to stand, walk, use hands to finger, handle or feel; reach with hands and arms, occasionally required to sit, climb or balance; stoop, kneel, crouch, or crawl; talk or hear, taste, smell, and may frequently lift and/or move 100 pounds. Specific vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus required. Must possess normal to average corrective hearing
May be required to work at heights above 100 feet
Flexible schedule required including nights, weekends, and holidays

121

Controls Technician Resume Examples & Samples

Minimum 5 to 10 years current experience in a related, relevant role
Previous experience overseeing and providing direction to contract engineering techs, internal maintenance, and outside contract trades
Strong practical hands-on electrical aptitude (All positions require time on the floor working on equipment)
Electro-mechanical troubleshooting ability, proficient with electrical schematics
Motion control knowledge: servo, stepper, DC, AC drives
Process variable understanding: flow, temperature, rate, pressure, level
Thorough understanding of current loops
Serial communication knowledge: RS232 / 485, Ethernet, IEEE-488
Machine control knowledge and understands classical control theory
AutoCAD® 2014, AutoCAD Electrical 2014
Windows7
MS Office Suite including Power Point, Excel, Word

122

Maintenance Controls Technician Resume Examples & Samples

Demonstrate the ability to troubleshoot complicated programs, modify/edit existing programs as well as write new programs for PLC’s, HMI’s, or CNC controllers
Takes an active role in training and developing other maintenance personnel in controls and automation
Responsible for installing and programming VFD’s in various types of AC and DC equipment
Responsible for wiring and building control panels for newly developed machines built in house
Assists in new equipment purchases and test run-offs requiring travel
Participates in compiling all software and schematic prints to insure updated documentation of equipment
Provides support on all shifts that require advanced resolution skills
Work in areas such as preventative maintenance, projects and machine repair as required

123

Shift Controls Technician Resume Examples & Samples

Troubleshooting PLC/Control Systems, VFD and controls
Diagnoses of electrical malfunctions in machinery, equipment, and process
Inspect visually and listen to machines, equipment, and process to locate causes of malfunctions
Identifies and reports the need for repairs to maintenance management
Work closely with maintenance managers and mechanics/electricians on projects and continuous improvement
Assist with the installation of new equipment and enhancing equipment through continuous improvements and upgrades
Effectively communicate with other departments in a professional manner at all times to communicate on equipment and repair status
Work within the maintenance team to accurately communicate/document events so that others have the most effective information to solve problems
Crossover with previous shifts maintenance and production employees to review the schedule and current runs, identifying what needs repair and plan product changeovers
Some basic mechanical duties as necessary, such as fabricating brackets, mounting sensors, etc
Perform preventative maintenance on electrical systems
Complete all tasks while strictly adhering to all required industry guidelines but not limited to; plant safety, food safety, SQF, and all internal/external audits
High School Diploma or GED
3 - 5 Years of experience or AAS electrical tech
Experience working with manufacturing equipment including 3 phase motors, control wiring, 24VDC, 120VAC, 208/220VAC, 480VAC
Experience with controls for conveyor systems and power transmissions, pneumatics, hydraulics, pumps and valves
Experience with temperature controls and I/P loops
Experience with calibration of RTD, T/Couple and other low voltage sensors
Knowledge of and ability to comprehend and troubleshoot production machinery (I.E. fillers, rinsers, capppers, case packers, case formers, coolers, palletizers, and facility related equipment
Familiarity with lock-out tag-out program, hot work, confined space
Able to read and interpret electrical schematics
Able to communicate in a professional manner at all times
Able to use a variety of measuring tools and test equipment
Able to work independently, with limited supervision
Ability to work with numbers, perform calculations and demonstrable mechanical inclination
Knowledge of Drill Press, Chop Saw, Port-A-Band, Sawzall, and other maintenance tools preferred
Knowledge or experience with Multi-Meters, Amp Probes, Megger Ohmmeter, PLC Troubleshooting via laptop, Panelview
Food manufacturing experience preferred

124

Controls Technician Resume Examples & Samples

Troubleshooting machine electrical, pneumatic, and hydraulic systems (machine controls)
Provides technical assistance to manufacturing employees, engineers and maintenance to resolve machine problems
Is able to apply technical information from references such as engineering standards, handbooks, technical references, etc
Ability to standardize processes and write standard work
Gathers and analyzes data using statistical methods
Must demonstrate a strong mechanical aptitude and problem solving ability
Have a strong understanding of PLC ladder logic, computer networking and programming architecture
Have a demonstrated history of strong drive for results
Minimum 3 years of technical experience is required
Associate's Degree from an accredited institution or equivalent military education is required
Relocation is not provided, only candidates within 50 miles of Roxboro, NC will be considered
2 or more years of experience working with industrial automation equipment i.e. PLC, robotics, vision systems
Experience with AutoCAD

125

Measurement Controls Technician Resume Examples & Samples

Install, troubleshoot, and maintain natural gas transmission and distribution systems
Perform required patrols, inspections, and maintenance on valves, regulator stations, odorization equipment, cathodic protection equipment, and SCADA equipment
Perform meter reading, meter turn ons and shut offs, new meter sets-including large volume
Responsible for standby on high pressure line crossings
Responsible for inspection of customer owned piping installations
Responsible for emergency response to damaged facilities, both Company and customer owned
5 + years verified training and work experience in Natural Gas industry. Senior/Journeyman level preferred
Working knowledge of industry construction standards and procedures
General knowledge of SCADA, Cathodic Protection, Gas Odorization, Gas Regulation & Metering systems
Works safely in a variety of crucial situations, while keeping the interest of life and property as paramount
Ability to successfully work independently or with a team

126

Controls Technician Resume Examples & Samples

Mechanical Skills and Focused Technician; knowledge and application of technical skills and expertise to ensure the provision of effective engineering support within team, focused on delivering performance targets. Directly contributes to improved safety, quality, sustainability and cost
Fully Operational on Mechanisms, Motion
Electrical Skills and Diagnostic Technician; Remove and replace major electrical components (such as motors, switch/control gear) and troubleshoot electrical circuits safely. Able to isolate machinery and re-install electrical supplies for machinery components
Install electrical drive systems and Control Loops
Instrumentation and Control Skills
Demonstrate an understanding of the Internal Architecture of Programme Logic Control (PLC) and Distributed Control Systems (DCS); their Applications and Knowledge of the Number Systems they use
Amend control and software documentation
Manage PLC and Supervisory Control and Data Acquisition Networks (e.g. Programme modifications, Force Devices and fault-finding)
Safety - Utilise all appropriate safety and environmental procedures for people, processes, materials, products and equipment to ensure a safe working environment for the whole team
Work Place Hazards – Full knowledge of the workplace and hazards within it. Utilise appropriate safety and environmental procedures for people, processes, materials, products and equipment relevant to the task
Environment - Reduce costs due to waste and minimise impact to health, safety and the environment through working to eliminate waste and through the correct management of waste and hazardous materials
Quality - Ensure that all aspects of Quality within the area of responsibility are in accordance with local Quality procedures to protect and promote the brand and product
Leadership - Promote the development of a highly effective team through strong communication, leading by example whilst keeping focused on goals and targets. Great teams and great leaders will achieve superior performance
Continuous Improvement - Use performance measures to identify and prioritise losses in production area. Apply rigorous Cost Deployment and the Zero loss concept to eliminate losses
WCM - Knowledge and understanding of the key principles of WCM and the impact this has on the Key Performance Indicators in the production area (PQSCDMI); must understand the critical inter-relation between WCM and TPM. Proficient in all 7 WCM tools
Problem Solving - Has the ability to identify, prioritise and address problems using appropriate tools and techniques that eliminate recurrence
Decision Making - Makes and implements technical decisions, which can impact the plan for the week
Project Management – Achieve the desired outcomes of the project in line with agreed plans using appropriate project management tools and techniques to ensure the efficient use of technical, financial and human resources
Business Awareness - Understanding of the need to meet changing demands and the role of marketing and product innovation in growing the business and increasing the company's share

127

Senior Controls Technician Resume Examples & Samples

Fanuc Robot Experience
Control system (PLC, motion control, safety devices, high level languages) and vision programming skills (Wit,Labview,Cognex,Helcon.)
Entrepreneurial
Forward looking
Knowledgeable in applicable national and international electrical and robotic design and safety codes

128

Maintenance Controls Technician Resume Examples & Samples

Plant project development, planning, and management
Assist in maintaining and developing plant drawings and documentation
Share knowledge and develop others through excellent communication skills
Practice under a Good Manufacturing Practices Regulatory Food Safety Program
Communicate and work with operators, other mechanics, senior mechanic and supervisors on maintenance problems and potential problems
Follow all safety, housekeeping and regulatory agency requirements
Participate in training to improve and maintain technical skills, teamwork, creativity and communication skills
All other duties as assigned by supervisors
Minimum of 5 years of Electrical/Controls experience in a manufacturing environment required

129

Controls Technician B Resume Examples & Samples

Functions independently in electrical controls on assigned equipment
Will hold all team members accountable to adhere to safety & GMP practices
Will develop, plan, and execute small improvement projects independently
Implement small scope projects in their assigned areas
Effectively and actively communicate with peers, supervisors, and other leaders on a daily basis, and be willing to provide support where needed and complete other duties as assigned by Team Leader
Act as technical resource to operations, maintenance, safety, and quality regarding electrical and controls related issues
Identify and recommend changes to improve plant performance utilizing existing electrical and control systems
Troubleshoot and analyze control system applications and make necessary modifications to get the systems up and running again
Support the introduction to the plant of new technologies

130

Project Controls Technician Resume Examples & Samples

Will provide cost control and scheduling support
Will track installed quantities on spreadsheets, comparing budgets to actual
Provide administrative support to the project controls team with such duties as timesheets, verification of quantities installed, daily log maintenance
Previous experience reading drawings and working in project controls preferred

131

Controls Technician Resume Examples & Samples

Perform mechanical and electrical preventative maintenance on various manufacturing equipment, PLCs, control networks, instrumentation, drives/servos, and electrical system
Advanced electrical, controls, instrumentation, and mechanical skills
Ability to work rotating shifts under stressful conditions such as heat, cold, heights, and/or confined spaces
Have full mobility with the ability to climb ladders and stairs
Previous maintenance/TR experience at NEA factory

132

Controls Technician Resume Examples & Samples

Work with Controls/Manufacturing Engineers to develop equipment and controls for new products as well as improving existing equipment (cycle time, scrap reduction, improved quality, etc)
Work with Maintenance to troubleshoot equipment, reduce equipment downtime, and execute plant equipment moves / modifications
Works with equipment vendors / external contractors to install new equipment or upgrade existing equipment
Maintains all programs (PLC, vision, robot, etc) used on the manufacturing floor
Interacts effectively with all levels of the organization, frequently participating on cross functional teams
Works within design procedures of ISO and Quality Systems
Willingness to travel to equipment vendor location
Assures adherence to standard manufacturing practices
Understands and adheres to current quality and control policies
Understands and adheres to current health, safety, and environmental policies
Identifies and closes safety issues (suggestions, inspection and investigation findings) and their corrective actions
Performs other duties as requested, directed, or assigned
This position requires a high school diploma, GED, or equivalent. Courses in Controls / Mechatronics / Automation Technology, Electrical / Computer Science Technology or Machining is a plus. Specific industry experience may be substituted in certain cases
3-5 years of experience required, 5+ preferred
Experience troubleshooting or programming Allen Bradley PLCs using RSLogix 5000 and RSLogix 500 is required.Experience programming or troubleshooting Siemens SIMATIC PLCs is a plus
Experience troubleshooting or programming CNC equipment (GE FANUC, Okuma, etc) is preferred
Experience with machine vision programming is preferred (Cognex vision experience is a plus)
Automotive product knowledge (engine systems etc) is preferred
Prefer at least 1 year of experience working with automated machinery in a manufacturing setting
Strong written and verbal communication skills are required

133

Project Controls Technician Resume Examples & Samples

Maintain the AECOM project financial system (uploading change orders, opening and closing projects, compiling monthly EAC)
Assist in developing of project WBS
Set up and administer project cost control, including monitor, collect and analyses actual cost, commitments and accruals
Identify cost trends and reports analysis to project management and clients and maintain project key performance indicators
Develop reports for clients including but not limited to progress and financial reports
Develop and maintain project variance and earned value reporting and highlighted exceptions to the project manager
Evaluate task projects against project schedule and budget
Evaluate project performance and identify areas of concern
Compile monthly invoices and follow up with client AP for approval and payment
Assist the Project Manager with developing Estimate to Complete Cost and Revenues
Assist in the identification of change conditions ad the development of Change Order requests documents and estimates
Manage subcontractor's involvement; coordinate contracts, budgets, commitments, expenditures, invoices and performance
Perform ad-hoc analysis as required by the Project Manager
Develop and maintain project schedules
General project coordination, logistics and administration
Working knowledge of ProjectWise, SharePoint or similar document control software considered an advantage
Experience working with Project Management software or major ERP software (i.e. Oracle, SAP or JD Edwards) is considered an asset
Experience working in a project environment
Working knowledge of MS Project

134

Controls Technician Resume Examples & Samples

Performs installation and testing of the instrumentation and electrical components of our products
Interpret engineering designs and drawings to develop field installations
Develop and install PLC and HMI programming
Implement commissioning and start‐up procedures for SCADA and automation
Create field reports related to project labor and materials
Ability to read and interpret P & ID drawings, electrical schematics
Use of basic electrical test equipment
Knowledge of electrical installation technical requirements in hazardous locations
Willingness to travel and work in remote locations
Professional appearance and attitude
Associate Degree – Electrical or equivalent training/experience
OSHA – Safeland – safety training

135

PLC Controls Technician Resume Examples & Samples

Experience with SERVO (e.g., intelligent/robotic motors, in-coders, etc.)
Experience with troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns)
Experience with reading mechanical drawings (e.g., hydraulics, pneumatics)
Experience working in team based environments (working together with others)

136

Controls Technician Resume Examples & Samples

A minimum of a 2 year degree in Engineering or related field and 3+ years of experience
Willingness to travel up to 25% to designated work site is a MUST
Proven experience with Allen Bradley Control Logix V20 programming system or higher
Strong knowledge of integrating equipment components into a working manufacturing line
Demonstrated ability to modify controls based off of data analysis
Excellent written, verbal and communication skills
Develop strong cross-functional relationships across the organization
Strong organizational skills to multi-task within constraints of timelines and budgets with business acumen
Ability to work in a fast-paced environment, learn rapidly and master diverse technologies and techniques

137

Controls Technician Resume Examples & Samples

Low voltage Building Automation or PLC controls experience required
HVAC or Electrical trade knowledge beneficial
Intermittently out of town travel and overnight stays

138

Controls Technician Resume Examples & Samples

Utilize electrical and computer skills to program PLC and Servo controls for production equipment, ensuring that it is running in the most efficient manner possible
Troubleshoot any issues related to PLC/Servo/HIM and make the necessary repairs
Assist in developing Scope of Work
Assists in developing specification for the new equipment and process
Works with vendors obtaining quotes bases on a RFQ and Specifications
Ensure that new equipment is properly designed, laid out and installed according to machine and plant specifications
Conduct equipment testing (FAT/PAT) to ensure that it continues to meet job specifications
Review and ensure optimal process design and continuous improvement in a variety of production processes
Handle all aspects of project management for new equipment installation, including timelines, costing and design review
Manage daily tasks of contractors
10+ years of experience in maintenance within a high-speed production environment
5+ years of experience with electronic and PLC based applications in an industrial environment
5+ years of experience with tools, procedures and methods utilized in an industrial maintenance environment
3+ years of experience in Project and Contractor Management
Experience working in a Lean manufacturing environment
Formal vocational training in plant maintenance activities with an emphasis on industrial applications or equivalent
Basic computer literacy, including skills with Microsoft Office and JDE
Able to work in difficult situations such as confined space, heat and elevated places
Ability to work in a high pressure environment with demanding and odd hours

Download Controls Technician Resume Sample as Image file

Related Job Titles

Technician Resume Sample

Systems Technician Resume Sample

QC Technician Resume Sample

Histology Technician Resume Sample

Tooling Technician Resume Sample

Monitor Technician Resume Sample

Temporary Technician Resume Sample

Commissioning Technician Resume Sample

Hydraulic Technician Resume Sample

BIM Technician Resume Sample

Generator Technician Resume Sample

Technology Controls Resume Sample

Browse More

Controls Technician Resume Samples

The Guide To Resume Tailoring

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Resume Builder

15 Controls Technician resume templates

Read our complete resume writing guides

How to Tailor Your Resume

How to Make a Resume

How to Mention Achievements

Work Experience in Resume

50+ Skills to Put on a Resume

How and Why Put Hobbies

Top 22 Fonts for Your Resume

50 Best Resume Tips

200+ Action Words to Use

Internship Resume

Killer Resume Summary

Write a Resume Objective

What to Put on a Resume

How Long Should a Resume Be

The Best Resume Format

How to List Education

CV vs. Resume: The Difference

Include Contact Information

Resume Format PDF vs Word

How to Write a Student Resume

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Maintenance Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

BMS Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Senior Controls Technician Resume Examples & Samples

Power & Controls Technician Resume Examples & Samples

Engineering Controls Technician Resume Examples & Samples

Propulsion Engine Controls Technician Ddg-msc Resume Examples & Samples

Tech-h&v Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Project Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Trane Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Lead BMS Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Intern Resume Examples & Samples

Radiological Controls Technician Resume Examples & Samples

Direct Digital Controls Technician Resume Examples & Samples

Industrial Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

ME Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Senior Controls Technician Resume Examples & Samples

Project Controls Technician Resume Examples & Samples

PLC Controls Technician / Evenings Resume Examples & Samples

Instruments & Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

PLC Controls Technician Rotating Shifts Resume Examples & Samples

Lead Controls Technician Resume Examples & Samples

Lead Controls Technician Resume Examples & Samples

Senior Controls Technician Resume Examples & Samples

Controls Technician Resume Examples & Samples

Senior Controls Technician Resume Examples & Samples

DC Controls Technician Resume Examples & Samples

Lead Proj Controls Technician Resume Examples & Samples

How to Make
a Resume

50 Best
Resume Tips

200+ Action
Words to Use

Internship
Resume