Engineer Technician Resume Samples
4.8
(108 votes) for
Engineer Technician Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the engineer technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
AT
A Turner
Anjali
Turner
94571 Leffler Lock
Los Angeles
CA
+1 (555) 278 5189
94571 Leffler Lock
Los Angeles
CA
Phone
p
+1 (555) 278 5189
Experience
Experience
Phoenix, AZ
Engineer Technician
Phoenix, AZ
Witting-Green
Phoenix, AZ
Engineer Technician
- Responsible for technical evaluation of client oil & gas assets, including calculating reserves upside
- Assist in coordination of the execution of mandates
- Writing of technical portion of the information memorandum with specific focus on
- Base case supported by client provided data
- Upside based on technical evaluation of assets
- Preparation of data rooms based on data supplied by client
- Marketing of oil and gas assets to potential buyers including
Chicago, IL
Field Service Engineer Technician
Chicago, IL
Connelly-Murphy
Chicago, IL
Field Service Engineer Technician
- Along with working on medical x-ray equipment, Field Service Engineer may work on body scanner that may be installed in correctional facilities
- Develop service handbooks and bulletins based on field investigations, engineering changes, and overall knowledge of the product
- Travel assigned "east coast" Florida territory (which includes an approximate 75-mile radius around Delray Beach) to various locations to provide on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications
- Daily travel throughout a territory covering the Southeastern coast of Florida between Broward and Miami-Dade counties (typically a 125-mile radius) to various locations, providing on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications. Work site locations will include hospitals, industrial environments, and correctional facilities
- Travel assigned Southeastern Florida territory (normally within a 150 mile radius daily) to various locations to provide on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications
- Assist Headquarters with staging, installs, and repair when demand exceeds existing resources
- Assist VI Headquarters with staging, installs and repair when demand exceeds existing resources
present
Los Angeles, CA
Field Service Engineer / Technician
Los Angeles, CA
Simonis, McClure and Johnson
present
Los Angeles, CA
Field Service Engineer / Technician
present
- Preparation of work programs for the timely servicing of assets (GE wind turbines)
- Assist in planning and coordinating team efforts
- Guide and assist technicians in the proper maintenance and fault finding of assets
- Lead the performance of assigned field services projects such as non-destructive examinations and analysis
- Maintain reports using GE’s various software management tools and databases
- Organise daily work plans for contractors
- Regularly inspect in-person the progress and quality of service/repair work
Education
Education
Bachelor’s Degree in Judgment Required
Bachelor’s Degree in Judgment Required
Duke University
Bachelor’s Degree in Judgment Required
Skills
Skills
- Having some knowledge and experience, able to handle usual occurring job events
- Demonstrated proficiency with basic PC use
- Has the knowledge and experience to be able to handle unusual and seldom occurring job events with minimal assistance
- Ability to perform within company quality standards
- Ability to handle multiple requests using resources available
- Knowledge of Wonderware software
- Ability to prioritize daily job tasks, organize and carry out multiple projects effectively
- Basic computer skills including but not limited to Word, Excel and Access
- Ability to occasionally lift up to 30 lbs., sit/stand for an 8 hour day, and view parts using a microscope
- Physical ability to lift as much as 40lbs, bend/stoop, kneel and climb stairs/ladders
15 Engineer Technician resume templates
Read our complete resume writing guides
1
Field Service Engineer Technician Resume Examples & Samples
- Travel assigned "east coast" Florida territory (normally within a 25 mile radius daily) between Broward and Miami-Dade counties to various locations to provide on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications
- Prepare and maintain record of performance reports detailing equipment serviced as well as other issues related to the event
- Analyze record of performance reports to determine source of problem and recommend repair, replacement, or other corrective action; determine trends affecting future design, production, service, and maintenance processes, and recommends modifications for product life and durability
- Understand business implications of decisions; display orientation to profitability
- Coordinate problem resolution with Engineering, Customer Service, and other Departments to expedite repairs
- Develop service handbooks and bulletins based on field investigations, engineering changes, and overall knowledge of product
- Assist VI Headquarters with staging, installs and repair when demand exceeds existing resources
- Strong technical background in one or more of the Medical Imaging disciplines preferred
- Good oral and written communication skills required as well as the ability to deal effectively with people at all levels both internally and externally
- Education required ASEE or BSEE (preferred); or equivalent degree or certification; or any equivalent combination of education, work experience, training and/or life experience that demonstrates the ability to do the job
- Occasional travel outside of assigned territory and/or overseas
- Other skills and responsibilities assigned by your Supervisor as necessary for the operation of the business
- Must live in or have availability to relocate to Broward and Miami-Dade county area
2
Field Service Engineer Technician Resume Examples & Samples
- Travel assigned "east coast" Florida territory (which includes an approximate 75-mile radius around Delray Beach) to various locations to provide on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications
- Over and above installing and servicing medical equipment, this role will also involve the installation of complete body scanners which are located in industrial environments including prisons
- This position requires driving for company business as an essential function of the job. This position is subject to updated background checks which includes a motor vehicle report. Employee must possess a valid driver’s license, have proof of insurance and can have no more than (2) minor moving traffic violations within a thirty-six (36) month period. If requested, employee must complete a Safe Driving/Defensive Driving Class. Canon U.S.A., Inc. will utilize the information in the background checks to determine an employee’s continued eligibility to drive for company business. Employees with motor vehicle records that violate the Canon Motor Vehicle Policy may be deemed ineligible to drive on company business and/or be subject to disciplinary action, up to and including employment termination
- Must live in or have availability to relocate to Delray Beach, FL area
3
Field Service Engineer Technician Resume Examples & Samples
- Travel throughout an assigned territory to various sites to provide on-site technical assistance to troubleshoot, repair, install, and maintain equipment. Territory is within a 75-mile radius of the "west coast" territory of Florida encompasing the Fort Myers/ Naples/ Bradenton/ Sarasota areas daily, but may also occasionally require travel to back up Engineers in other locations
- Analyze record of performance reports to determine source of problem and recommend repair, replacement, or other corrective action; determine trends affecting future design, production, service, and maintenance processes, and recommend modifications for product life and durability
- Assist Headquarters with staging, installs, and repair when demand exceeds existing resources
- Experience: Minimum 1 - 2 years of relevant experience required
- Must live in or have availability to relocate to the Fort Myers/ Naples/ Bradenton/ Sarasota territory
4
Senior Engineer Technician Resume Examples & Samples
- High level of technical oil and gas engineering understanding and application
- Computer skills: Microsoft office, economics software, data bases and other technical oil and gas programs
- High level of discretion dealing with confidential matters
- Strong organizational and time management skills and ability to set priorities
5
Trainee Engineer Technician Resume Examples & Samples
- No previous experience required
- Ability to demonstrate team working and willingness to learn
- Excellent career developement available
- Potential for study support and additional qualifications
- Full training available
6
Field Service Engineer Technician Resume Examples & Samples
- Travel assigned tristate territory (Georgia, Alabama, and Tennessee) to various locations to provide on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications
- Over and above installing and servicing medical equipment, this role will also involve the installation of complete body scanners which are located in industrial environments including correctional facilities
- Must live in or have availability to relocate to the tristate Georgia, Alabama or Tennessee area
7
Field Service Engineer Technician Resume Examples & Samples
- Travel assigned in IL, IN, MI territory (normally within a 75 mile radius daily) to various locations to provide on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications
- Must live in or have availability to relocate to IL, IN, MI area
- Along with working on medical x-ray equipment, Field Service Engineer may work on body scanner that may be installed in correctional facilities
8
Field Service Engineer Technician Resume Examples & Samples
- Travel assigned Southeastern Florida territory (normally within a 150 mile radius daily) to various locations to provide on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications
- Minimum 5 years experience required. Strong technical background in one or more of the Medical Imaging disciplines preferred
- Must live in or have availability to relocate within the assigned territory
9
Contamination Engineer / Technician Resume Examples & Samples
- Establish and maintain documented test procedures that meets TS 16949 and all current customers (GM, Ford, FCA & VW) requirements
- Maintain lab equipment, purchase consumables
- Perform sediment testing per customer specifications using SEM, Jomesa
- Analyse results, issue test reports and follow up with process team for corrections when non-conformances are identified
- Maintain sediment test records per customer and APT’s requirements
- Participate in FMEA activities to improve sediment levels
- Communicate with customers and suppliers with regards to sediment issues as requested
- Work on process improvement to ensure that the Company’s quality targets are met
- Participates in quality planning / improvement activities
- Assists the Quality Manager with day-to-day plant issues
- Completion of university degree/college diploma in Mechanical Engineering
- Well experienced with SEM and Jomesa equipment. Knowledge of TS 16949, APQP and PPAP
- Minimum 5 years’ work experience in a similar quality capacity, preferably in an automotive environment
- Knowledge of TS16949, measuring equipment, gauge calibration, gauge R&R studies, SPC, inspection processes (receiving, in-process, and outgoing)
- Technical Skill requirements include the ability to read and understand cleanliness test specifications, test methods, and blueprints
- Experienced with measurement equipment (e.g. micrometer, bore gauge, air gauge, shadowgraph, etc.)
- Ability to communicate and interact well with people in all departments
- Must be a self-starter, team player and an active listener
- Must be able to manage competing demands, accept constructive feedback, while being extremely adaptable and flexible
- Proficient in Microsoft Office (i.e. Microsoft Excel, PowerPoint, Project, Access, and Word)
- Willing to take responsibility for work and respond to company needs
- Demonstrated ability to meet deadlines and prioritize a heavy workload
- Must have the ability to quickly learn systems, processes and procedures
- Professional, and exceptional interpersonal skills (written, verbal, listening)
- Exceptional organizational skills
- Able to work in high pressure, deadline-oriented environment
10
Cybersecurity Engineer Technician Resume Examples & Samples
- Research and recommend cybersecurity architectures and procedures, executing cybersecurity vulnerability testing in mixed network environments
- Generate and manage cybersecurity Assessment and documentation
- Participate in technical meetings, providing cybersecurity services for military tactical/non-tactical, Electronics Support Measures suites and relational database applications
11
Engineer Technician Resume Examples & Samples
- Conducts or participates in research, design, development and testing of digital, analog or radio frequency hardware to include circuit design and sub-system integration for designated products and/or customer applications
- Assesses the severity of problems, determines corrective action, resolves technical problems, performs fault isolation, and implements solutions
- Specifies materials, equipment and supplies
- Modifies existing engineering designs
- Conducts prototype construction and tests
- Logs, compiles and evaluates engineering data
- Writes engineering manuals, procedures and reports
- Analyzes equipment to establish operating data
- Develops logic flowcharts and block diagrams
- Supports on-site installation activities
- Assists in preparing engineering design specifications
- Assists in engineering drawing and specification inputs
- Assists in the preparation of specifications and assessment of vendor products
- Applies and maintains quality standards
- Keeps abreast of improvements in hardware engineering techniques
12
Engineer Technician, Mid Resume Examples & Samples
- 2+ years of experience with engineering and network principles
- Experience with computer coding and programming
- Experience with process control and test procedures
- Experience with physics and mathematics
- Knowledge of quality control programs and procedures
- Experience with maintaining inventory
- Experience with computer-aided drafting
- Experience with Web application development using Java, .NET, ASP, or CFML
- Experience with writing and debugging JavaScript
- Experience with COMSEC equipment and procedures
- Possession of excellent analytical and time management skills
- Secret clearance preferred
- BS degree in an Engineering field preferred; MA or MS degree a plus
13
Sensors Engineer Technician, Senior Resume Examples & Samples
- 15 years of experience as an engineer or senior technician employed at a Naval warfare center or headquarters Navy systems command
- Knowledge of undersea warfare and Naval submarine systems and capabilities
- Ability to analyze, research, assess, and organize technical data into cohesive and clear technical reports and presentations
- Ability to lead high performing work teams and design, develop, and deliver a material system or product related to sensors
- MS degree in Engineering or Physics
- Knowledge of the optimization of the response of linear systems
14
Engineer Technician, Mid Resume Examples & Samples
- 4+ years of experience as a Navy technician
- Experience with Lock-Out-Chamber (LOC), Dry Deck Shelter (DDS), and Advanced Swimmer Delivery System (ASDS) operations in support of 7TV
- Experience with Battle Management Center (BMC) operations’ effect on 7TV
- Experience with AN/BYG-1 Video Distribution System in support of 7TV
- Experience with 7TV Hardware Architecture, Interfaces, and related Specifications
- Experience with installing and grooming 7 Television (7TV) equipment
- Top Secret clearance
- Experience or service with submarine
15
Engineer Technician, Mid Resume Examples & Samples
- Experience with unique legacy combat system hardware, operations, and Integrated Logistics Support (ILS) issues
- Experience with SEAWOLF Class Environmental Qualification Test (EQT) requirements, including noise, vibration, and shock and test conduct, including test plans, procedures, reports, data collection and analysis
- Experience with Multi-Mission Platform (MMP) operations and interfaces to forward end Non Propulsion Electronics Systems (NPES)
- Experience with the Submarine Warfare Federated Tactical Systems (SWFTS) Non Propulsion Electronics System (NPES) Baseline Change Request (NBCR) change process
- Experience with existing NPES Vital Power and Rigged for Reduced Electrical (RRE) budget issues
16
Service Engineer / Technician Resume Examples & Samples
- General servicing of machines or equipment to detect malfunction and discuss machine operation variations with supervisors or other maintenance workers to diagnose problem or repair machine
- Inspect/check of lay out, assembles, installs, and maintains pipe systems and related hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment
- Installs, programs, or repairs automated machinery and equipment such as programmable controllers
17
Field Engineer Technician Resume Examples & Samples
- Respond to Customer requests for On-Site Hardware Repair Services, use company provided parts and tools to resolve such problems to the customer’s satisfaction. Expedite difficult service issues to appropriate IT support personnel to ensure timely resolution of the problem
- Participate in the installation and relocation of existing and new IT Technologies as determined by management, maintain pace with the schedule to ensure timely completion of the project
- Complete the necessary Preventive Maintenance and Inventory Audits on all IT equipment following the Field Engineer written procedures/guidelines
- Review hardware service history and recommend replacement or relocation of equipment with unsatisfactory performance. Present recommendation to Field Engineer Manager
- Troubleshoot IP Telephone and computer connectivity or communication problems to determine if the problem is network related or the result of PC software/hardware failure or Telephone hardware failure. Collaborate with other IT support personnel as necessary to resolve the issue
- Complete the functions of the Project Management system in responding to requests for removal, relocation, or installation of equipment
- Participate to any extent necessary in the development and implementation of disaster recovery if it should become necessary
- Review service/technical manuals and On Line Forums to maintain familiarity on the service of all PC’s, Servers, Operating Systems, Print Devices, Networking Hardware and wiring systems currently deployed at Associated
- Daily travel to ABC locations within Service Region, occassional travel to other Service Regions with overnight stays
18
Student Engineer Technician Resume Examples & Samples
- Builds prototypes for testing and experimentation, and makes samples for further analysis
- Conducts tests and experiments with new materials and processes to develop data for specification call-out or to determine suitability of a material for particular applications
- Makes sketches and marks up drawings as needed to show changes as they occur
- Works with engineering to establish test techniques for new product during development and to resolve product or equipment problems
- Improves and refines existing fixtures, devices, methods, process steps or procedures, implementing changes as necessary
- Uses all equipment, techniques and tools necessary to completion of the task
- Minimum completion of Sophomore year of college/university studies or a student in the second year of a manufacturing or engineering technology program
- Academic curriculum as prescribed by an accredited engineering technology program
- Able to participate in an internship for Summer 2017, prior to completing current degree program
- Effective communication skills for interacting at all levels of the business, including verbal, written and presentation skills
- Applied knowledge of standard office and engineering desktop systems and applications
- Interest in applied engineering technology career in a technology or manufacturing business
19
Engineer Technician, Mid Resume Examples & Samples
- 5+ years of experience with the fabrication of electronic and electro-mechanical components and subsystems
- 5+ years of experience with the integration of electronic and electromagnetic components and systems in US Navy and Joint systems and platforms
- 5+ years of experience with operating, troubleshooting, and repairing a wide variety of electronic and electromagnetic sensors and supporting instrumentation and electrical and electronic test equipment
- Ability to operate independently in a fast-paced, dynamic environment
- Forklift Operator Certified preferred
20
Engineer Technician Resume Examples & Samples
- Conducts multiple measurements and process tools as per assignment
- Maintains records and make observations according to established procedures to ensure pertinent project related information is properly documented
- Improves and apply learned technical guidelines in order to guarantee that techniques and processes are carried out with a high degree of reliability
- Operate electronic, mechanical or computer systems
- Maintain a safe and orderly work environment. Identify and prevents hazards which could result in injuries or accidents
- Organizes multiple task assignments to insure that data are generated and reported within the optimum timeframe
- Produce repeatable results through the application of consistent efforts applying given instructions and report in an adequate format, results and progress on tasks performed
- Maintain good and friendly relationship with colleagues
- Teach and supervise temporary employees in tasks of responsibility
- Provide reliable testing on agreed timing
- Adhere to the Quality Systems and ensure GLP (Good Laboratory Practices)/GDP (Good Documentation Practices) compliance
- Reliably carry out procedures in an accurate and repeatable manner
- Be compliant with the EHS rules in laboratory areas. Responsibility for the prevention of health hazards in the workplace, and for responding to the needs to correct safety hazards
- Review results in lab notebooks and in any form of data handling system as required by established procedures
- Draw plans for the production/realization of small tools (CAD software, preferred ProE)
- Provide ideas for news equipment instruments
- Develop new methods for verification/qualification of container closures system
21
Senior Engineer Technician Combat Systems Resume Examples & Samples
- A minimum of 6 years of experience in technical, installation and testing of Combat Systems, Weapons, Electronic and Aviation Systems aboard Navy vessels is required
- A high school diploma is required; a GED or certificate from a vocational training curriculum may be substituted
- Must possess and exercise diplomatic tact and interface with the customer
- Must be proficient in the full suite of Microsoft Office products and tools
- Travel (10%) may be required
22
Civil Engineer Technician Resume Examples & Samples
- Create design studies and concepts for the strength and economy of structural design which confirm to the needs and requirements of the client
- Interpret and adapt traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards
- Provide civil design services including preparation of civil/site work drawing, structural evaluation and design
- Supervise and prepare periodic project inspection reports prior to final acceptance and turnover
- Provide procedural technique systems as required in support the construction program
- Provide immediate solution of problems at site for on on-going construction issues
- Provide scope of work and quantity survey of propose projects
- Support the workforce with structural technical advice and assistance
- Provide studies, design and investigation for the development and needs of existing building concerning existing building concerning and expansion and or extension, modification, or alteration of building
- Preparation and maintenance of as-built drawing
- Ensure that rules, regulations and guidelines are followed without exception
- Review and approve project reports and designs
- Ensure that the project is completed on time within the planned budget
- Perform other qualified duties as required
- Thorough knowledge of civil/structural design and engineering techniques
- Fluent in English language
- Proficient in creating designs for local construction contractors to complete, and meet the requirements of the client
- Excellent communications, effective leadership and interpersonal skills
- Capable of complete design services including structural load determination, planning and siting
- Proficient using Microsoft Office and Project, etc
- Able to develop detailed design layout according to the requirement of the client
- Ability to assess and address both challenges and potential risks of the planned project
- Demonstrated ability to think creatively and logically to resolve various issues in the development process
- Able to obtain a Secret Security Clearance
- Five (5) or more years’ experience in the engineering/construction management industry
- Experience with the design and supervision of a project with the aid of Auto Cad software
- Qualified specification writer for international standard concerning building road, port, and irrigation projects
- Previous experience with up-grading and maintenance of existing civil facilities
- Civil and Structural Engineering knowledge in both Horizontal and Vertical Constructions
23
Engineer Technician Resume Examples & Samples
- Has the knowledge and experience to be able to handle unusual and seldom occurring job events with minimal assistance
- May serve in a lead or supervisory role and train others
- High School diploma or equivalent and 4 years of related experience
- AA degree in related discipline and 2 years of related experience
24
PLC Engineer / Technician Resume Examples & Samples
- Responsible for setting of electronic and screwing machines
- Support of maintenance department when problems with manufacturing line occur
- Communication with suppliers
- Support of production process regard to operating systems and overlook of meeting the specification of the production process
- Creating of program for producing machinery and machines (robots, PLC automats)
- Drawing of electronical documentation and its update
- Programming of FANUC robots
- Creating of process visualization (SCADA/HMI)
- Maintenance of hardware and software
- Education: PLC Engineer/Technician (event. maintenance)
- Work experience on similar position advantageous
- Knowledge of: elektronic CAD, EDP, good SES knowledge, experience with programming of PLC SIEMENS SIMATIC, knowledge of scan machinery, knowledge of Profibus and AS- interface, knowledge of MS SQL is advantegeous
- Knowledge of Czech- and English language
- Stress-resistent, ability to think analytically
- Work in 3 shifts (7,5 hour a day + 0,5 hour lunch break)
- Unique free space for your ingenuity and consistent implementation of good ideas
- Holistic work on complex tasks beyond the usual limitations of disciplines and responsibilities
- An international environment with people from 84 nations at our German sites alone
- Good development and career opportunities
- An authentic and open corporate culture
- The proverbial team spirit of Johnson Controls
- Transport contribution
- Holiday contribution (up to 10.000 CZK a year)
- Pension insurance contribution
- 5 weeks of holiday
- Free lunch
- Language courses (English and German)
- Relocation bonus (acommodation covered by the company for first 3 months + assistance with relocation)
25
Engineer Technician Resume Examples & Samples
- 7+ years of experience with installation, integration, operation, testing, overhaul, reconditioning, technical documentation, IETMs, and maintenance of relevant US Navy mine countermeasures systems and equipment is required
- Knowledge of mechanical, electrical, or electronic systems aboard MCM Class ships
- Ability to work effectively as team member alongside technical and engineering personnel representing other contractors, DoD civilians, US Navy, or foreign military organizations
- Experience with installation and integration of shipboard equipment
- Knowledge of US Navy MCM Class combat systems
26
Engineer Technician, Senior Resume Examples & Samples
- 10+ years of experience with installation, integration, operation, testing, overhaul, reconditioning, technical documentation, IETMs, and maintenance of relevant US Navy mine countermeasures systems and equipment
- Knowledge of mechanical, electrical, or electronic systems aboard MCM class ships
- Ability to work effectively as a team member alongside technical and engineering personnel representing other contractors, DoD civilians, US Navy, or foreign military organizations
- Experience with depot level repair and refurbishment of US Navy sonar and other MCM equipment
- Knowledge of US Navy MCM class systems
- Ability to work shipboard, dockside, at sea, or in shipyard
27
Engineer Technician, Senior Resume Examples & Samples
- 12+ years of experience with progressive system development
- 10+ years of experience with Mobility Air Force operations, including mission planning support equipment
- Experience in working with system engineers, hardware engineers, and users to derive requirements and document limitations, capabilities, performance, and interfaces
- Experience with leading engineering workshops and technical exchanges
- Knowledge of mission support equipment functions, including spectrum frequencies required
- Secret clearance required
- Knowledge of DoD integrated engineering support processes and procedures preferred
- Ability to identify cross-impacts between changes to hardware and software
- Ability to display interpersonal expertise, including analytics, problem solving, organization, issue resolution, and customer relationship management
28
Senior Field Service Engineer Technician Resume Examples & Samples
- Provide technical expertise for servicing of medical equipment (laser, RF and Ultrasound)
- Use escalation process to inform Manager, Technical Support and Headquarters of unresolved issues as well as suggestions to improve equipment performance
- Work with 3rd party service consultants for territory coverage of service repairs
- AA Degree in Electronics, or equivalent experience
- 7+ years of previous field service, or equivalent experience
- Risk Management: General knowledge of risk management for medical devices a plus
- ESD: General knowledge of ESD environment
- Ability to maintain inventory / service records and paperwork
- Approximately 50% travel on average required, mostly domestically but occasionally internationally
29
OSP / ISP Field Engineer Technician Resume Examples & Samples
- Engineering Standards: Learn and apply engineering standards, systems, document control, departmental guides and Company policies and procedures
- Quality / Continuous Improvement: Ensure deliverables are accurate and compliant by continually developing knowledge of the Company Quality Program. Demonstrate personal accuracy and support continuous improvement and change management efforts
- Engineering Production: Broaden knowledge of applications required to modify and develop less complex deliverables based on a variety of design inputs. May assist with minor computations such as material quantity estimates and dimensional checks
- Project Coordination: May assist in coordinating deliverables with other groups involved on the same project
- Client Focus: Focus on needs of internal clients while gaining basic understanding of external client's main interests and drivers
30
Production Engineer Technician Resume Examples & Samples
- Review and understand blueprints and specifications for required parts
- Determine the sequence of steps to follow, tools and materials necessary produce the parts
- As necessary develops specifications from general description and draws sketch of part or product to be fabricated
- Follows safety regulations and reports safety violations to management
- Reviews engineering drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, as well as the sequence of operations, and setup requirements necessary to produce such
- Lays out dimensions and reference points on material or work piece as guides for subsequent machining
- Sets up fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and grinders
- On both manual and CNC equipment, calculates and set controls to regulate machining factors such as speeds, feeds, coolant usage, and depth and angle of cut
- Observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls and components accordingly
- Verifies conformance of finished work piece to specifications
- Fits and assembles parts into completed when the assignment requires
- Confers with engineers, programmers, other tool room personnel or associates as needed to ensure success of the task
- Assist engineers as they create, modify, and test products and processes
- Assist engineers as they inspect products and processes for flaws and identify areas of improvement
- Build and set up equipment based on engineers input or feedback
- Ability to utilize computer-aided design and drafting equipment during design phase
- Support in the develop methods used in the prevention, control, or remediation of environmental hazards
31
Engineer Technician Resume Examples & Samples
- Drafting of drainage features and miscellaneous details, catchment maps and completing basic calculations
- Creation of design and construction details, including erosion and sediment control drawings using AutoCAD or Microstation. (Experience using AutoCAD Civil-3D and/or Microstation Inroads tools would be an asset for this role.)
- Utilize Geographic Information Systems (ESRI ArcGIS) in support of hydrology studies, hydraulic modelling, mapping and assets/data inventorying
- Perform quantity calculations and produce/check engineering analytical data and related information to assure the design and any technical reports are accurate
- Deliver critical design-build components regarding project scope
- Utilize a CAD workstation to prepare engineering drawings consisting of basic arrangements, layouts, flow sheets, etc., from rough sketches and/or from general engineering and design information according to established standards and procedures
- Utilize technical manuals and directives to ensure compliance with codes and company policies. Becomes familiar with various standards and codes
- Compile data and performs dimensional and routine calculations required for the preparation of drawings
- Understands how to read orthographic (2D) and/or isometric (3D) designs and supplier/manufacturer drawings
- College diploma or University degree in a Civil Engineering program (or equivalent with a focus on construction and municipal infrastructure)
- 3-5 years of relevant experience in a consulting engineering environment, following graduation
- Requires basic process engineering knowledge, as well as a working knowledge of CAD and other PC software packages typically associated with civil engineering
- Be familiar with the use of Geographic Information Systems (GIS) (i.e. ArcGIS 10 or later) and understand basic GIS mapping and analyses, including the use of the ArcGIS extensions, 3-D Analyst and Spatial Analyst, to work with geographic datasets; namely, Shapefiles, Rasters and Images
- Have a basic understanding of working in coordinate systems, i.e., geographic (lat, Long.) and projected (UTMs), and have previous experience geo-referencing datasets based on real world coordinates
32
Life Cycle Management Engineer Technician Resume Examples & Samples
- Experience with performing periodic and corrective maintenance on all LCSF support equipment, including configuration management switching system, front end stimulators, towed array simulators, monitoring subsystem data converter simulators, RADAR simulators, and ship control functional baseline and control simulation systems, AN/BQQ
- 5E(V)4, AN/BQQ
- 6, ARCI TI
- 02 Sonar, later ARCI TIs, CCS MK2 Block 1C, OHIO Class legacy launcher equipment, AN/BYG
- 1, OHIO Class ship control and OER ship control equipment, AN/BPS
- 15J, AN/BPS
- 16, RADAR equipment, and IC/TACNAV equipment
33
Engineer Technician, Mid Resume Examples & Samples
- Experience with Lock
- Out
- Chamber (LOC), Dry Deck Shelter (DDS), and Advanced Swimmer Delivery System (ASDS) operations in support of 7TV
- Experience with Battle Management Center (BMC) operations effect on 7TV
- Experience with AN/BYG
- 1 Video Distribution System in support of 7TV
34
Engineer Technician, Senior Resume Examples & Samples
- 5+ years of experience with supporting the design, development, test, and evaluation of a wide variety of electronic and electromagnetic sensors and systems
- 5+ years of experience with setting up and conducting laboratory and field tests
- 5+ years of experience with the fabrication of electronic and electro
- Mechanical components and subsystems
- Knowledge of Directed Energy (DE) technology
- Ability to perform logistical actions, including identifying required components and support equipment, coordinating with vendors to obtain quotes and relay technical requirements, and processing orders through a procurement team
- Ability to operate independently in a Fast-paced, dynamic environment
35
Engineer Technician Resume Examples & Samples
- Routine engine and compressor performance and maintenance analysis
- Periodic portable emissions testing
- Identify report and assist in the correction of environmental concerns
- Routine vibration testing and data analysis. Continual support toward an ongoing vibration mitigation program
- Green House Gas surveys and leak detection and reporting
- Engine and compressor testing to establish or correct performance and control system coefficients
- Provides corrective actions to resolve operational problems and work with location personnel to resolve plant equipment issues
- Monitor reliability of mechanical systems and equipment
- Complete appropriate documentation and communicate the mechanical health of equipment to local and regional management
- Provide technical assistance in the operations and maintenance of plant equipment and provides training on equipment operations and maintenance policies and procedures
- Perform all work in compliance with all Company standards, procedures, and regulatory and tariff requirements
- Assist with start-up and commissioning of new compressor station equipment
- Deal with a wide variety of people with tact, courtesy and professionalism. Speak clearly, both in person and by telephone, using a high level of verbal skills and listen carefully
- Manage other related duties as assigned
- Basic computer skills working with the Microsoft Office product line (Word, Excel, and Outlook), learn additional equipment specific data acquisition applications
- Solid basic math skills (addition, subtraction, multiplication, division, fractions, decimals)
- Working knowledge and experience with electronic equipment, high pressure gas, processing equipment, reciprocating two and four cycle integral/separable or gas turbine engines, electric motors along with reciprocating and centrifugal compressors
- Working knowledge of reciprocating engine and compressor performance and maintenance analysis
- Working knowledge of vibration testing and other predictive technologies
- Working knowledge of portable emissions testing
- Past experience with data collection and route based hardware and software such as Dynalco Recip-Trap/Windrock analyzer, CSI/SKF vibration analyzer, Ecom/Testo emission analyzer and others
- Goal orientated with a focus on self motivation and independent work scheduling
- Proven analytical and trouble shooting skills
- Must be able to work unsupervised and within a team, take direction from Supervisor(s), adhere to required work schedules, focus attention on details, and follow work rules, as well as, take on additional job responsibilities as needed
- The above statements describe the general nature and level of work being performed. This position may perform other duties as assigned
36
Assistant Permanent Way Engineer / Technician Resume Examples & Samples
- HNC/HND/Degree Civil Engineering or equivalent
- Experience in the use of CAD (Microstation or AutoCAD)
- Desire to learn and develop new skills and knowledge
- Ability to work well within a team and independently
- BRT or MX Rail experience
- Gauging and ClearRoute experience
- Previous involvement / experience in producing Permanent Way designs
- Knowledge of Network Rail and Railway Group standards relevant to P Way design
37
Engineer Technician Resume Examples & Samples
- Employee applies the basic fundamental, concepts, practices, and procedures
- High School diploma or equivalent and 2 years or related experience
- AA degree in related discipline and 1 year of related experience
38
Engineer, Technician Resume Examples & Samples
- Adhere to established safety procedures in Technical Work Center and New Castle Facility
- Ability to work on majority of equipment from one of the three shops in the Technical Work Center
- Electronics Work Center
39
Field Service Engineer / Technician Resume Examples & Samples
- Preparation of work programs for the timely servicing of assets (GE wind turbines)
- Organise daily work plans for contractors
- Raise purchase requests for parts, consumables etc. as required
- Interpret the requirements of GE manuals, specifications, bulletins, work instructions, etc. and devise work plans including all required resources
- Guide and assist technicians in the proper maintenance and fault finding of assets
- Regularly inspect in-person the progress and quality of service/repair work
- Maintain reports using GE’s various software management tools and databases
- Ensure all work is performed in accordance with the organisation’s JSA, LOTO, EHS and associated policies/procedures
- Report errors, violations, incidents or problems immediately using GE reporting systems
- Submit enquiries to Engineering to ensure technical issues are resolved
- Answer questions from management, Engineering, Sourcing, Projects etc. as required
- Prepare relevant documents to ensure all service work is compliant with our internal Quality Management System
- Initiate communication with clients to ensure technical issues are resolved
- Make a conformance or non-conformance decision upon completion of a visual and or measurement inspection
- A qualified electrical supervisor or a qualified mechanical fitter with electrical endorsements
- Experience troubleshooting, repairing and providing regular maintenance for wind turbines is highly desirable
- Proficiency with electrical test equipment and experience reading electrical schematics
- High level computer skills including understanding of network communications (IP addressing)
- An ability to complete physically demanding tasks at heights coupled with a results orientated approach is essential
- This is a hands-on role for an experienced wind turbine technician who has a positive outlook and an energetic “can-do” attitude
40
IMR Engineer Technician Resume Examples & Samples
- Good customer service
- Communication skills both written and verbal
- Ability to assertively manage projects through successful, timely completion
- Ability to execute quickly and accurately, strong organizational skills, and the ability to successfully function independently as well as in a team environment
- The candidate must possess an Associate's Degree Computer Engineering, Mechanical Engineering or any other field of study. Equivalent military training will also be considered
- Ability to diagnose, troubleshoot PCB's to the component level
- Proficiency with industry test equipment including: O-scopes, multi-meters, Etc
- Ability to develop/design and recommend engineering improvements to PCB boards
- Experience performing software and firmware installation, upgrades and downgrades
41
Civil Engineer Technician Resume Examples & Samples
- Must be able to communicate with base populace and interpret their needs
- Develop a full set of Contract documents for project bidding including all contract requirements
- Performs other duties and assignments as required, such as updating drawings with as-built information provided by contractor after completion of projects
- This position is closely supervised by the DPW Facilities manager
- High School diploma or equivalent is required. Associate Degree within Engineering Filed is preferred
- Should have excellent oral and written communication skills; Five (5) years working in a similar position and shall have improvement/quality management system experience
- AutoCAD Training/Course work
- Extensive Engineer Technician Support Management experience (5 Years)
- AutoCAD software experience (5 years)
- Possess knowledge of safety and environmental issues as they relate to Engineering Technician Support Management
- Accustomed to dealing at executive level
- Experience in application of Building, Plumbing and Mechanical Code a plus but not manditory
- Prior military experience a plus but not mandatory
42
NDT Engineer / Technician Resume Examples & Samples
- Direct mill support
- Training, certification and performance reviews of NDT personnel
- Order planning
- Support to other departments, primarily Certification and Product Engineering groups
- Test results approval
- NDT specification review
- NDT procedure development
- Direct customer support
- Perform external and internal audits
- Development of new technologies
- Interaction with industry groups
43
Field Engineer Technician Resume Examples & Samples
- Biomedical, mechanical and/or experience servicing electronic equipment
- Experience troubleshooting and responding to customer concerns
- Demonstrable interpersonal skills / customer relationship management abilities
- Proven personal time management and reasoning skills
44
Engineer Technician ICE Resume Examples & Samples
- Minimum High School Diploma or Equivalent - AA/AS or BS degree plus two years of experience in a semiconductor lab environment, or equivalent experience in a class test environment preferred
- Must be able to lift up to 30 lbs. and walk long distances
- Demonstrated verbal and written communication skills and be comfortable presenting issues and solutions
- Ability to work well in a diverse team environment and multitask
- Ability to work with minimal supervision and adjust to rapidly changing priorities
- Ability to produce results in a timely manner
- Self motivated- Analytical problem solving and testing skills-
- Ability to work on 12 hours shift, day or night
- Ability to push carts for at least a distance of 500m
- Experience in computer software Microsoft* Office* and data base entry
- Experience in lean manufacturing
45
Industrial Engineer Technician Resume Examples & Samples
- 464234200
- Knowledge of standard accepted industrial engineering practices to combine work measurement studies from a wide variety of sources into comprehensive study; mechanics and construction maintenance and repair facility work process and methods; and mathematics and statistical analysis techniques
- Knowledge of safety and occupational health requirements outlined in applicable standards, regulations, and/or technical orders
- Knowledge of the operations, services, needs, and goals d management and their program(s); the organizations studied or served and related customer, functions, and users
- Ability to read engineering and architectural plans and specifications, gather, analyze, and present data and supporting analyses such as manpower validation exercise and contracting out studies; and research, analyze, interpret and apply rules, regulations and procedures
- Ability to independently plan, coordinate and organize work to identify problems and develop Innovative solutions; communicate effectivity, both orally and In writing; and establish and maintain good working relationships
- Your resume containing past employers names and detailed work experience
46
Electronics Engineer / Technician Resume Examples & Samples
- Minimum 5 years as an electronics technician OR BS Electrical/Mechatronics Engineering
- Experience assembling, testing and troubleshooting embedded systems, both analog and digital to component level
- Build, test, modify, and troubleshoot prototype PCB
- Soldering certification J-STD-001 or IPC-A-610 preferred
- Experience with wire harness assembly and installation
- Comfortable with instrumentation development, sensor integration, data acquisition
- Basic understanding of electronic component operation
- Experience with development tools such as Matlab, Simulink, and Embedded Coding would be an advantage
- Knowledge of C-programming would be an advantage
- Experience with wireless protocols such as Bluetooth or Ant+ would be an advantage
- Experience with suspension systems and vehicle dynamics is advantageous
- Pro-Engineer/3D CAD modeling preferred
- Proficient in the use of PCs with Windows and common software such as Word and Excel
- Solid interpersonal skills
47
IMR Engineer Technician Resume Examples & Samples
- Minimum educational requirement for this position is an ASET or equivalent experience and 3- 5 years' experience in PCB debug and validation
- Excellent troubleshooting and soldering/de-soldering skills are required
- Must possess strong understanding of microprocessor, digital and analog circuitry
- Must possess working knowledge of basic test equipment such as multi-meter and digital/analog oscilloscopes
48
Engineer Technician Resume Examples & Samples
- Proficient with electronic test instruments
- Knowledge and experience applying and interpreting results from common electrical measurement instruments (voltmeter, ammeter, ohmmeter, oscilloscope, etc.)
- Knowledge and experience with electronic equipment, high pressure gas, processing equipment, pumps and reciprocating or gas turbine engines and compressors
- Knowledge of Wonderware software
49
Field Service Engineer / Technician Resume Examples & Samples
- Construct complex prototype models or simulated systems, as requested
- Record, compile, and reduce data for analysis and assist in related assessment and preparation of reports
- Recommend changes, such as new equipment or modified procedures, to improve performance and customer satisfaction
- High School Diploma or GED and 5 years of professional work experience
- Bachelor’s degree in electrical engineering and 3 years of instrumentation experience in a field service role
- Waste Water industry experience
- Experience with field instrumentation and devices, including flow, pressure, temperature, valve positioners, and water analyzers
50
Nuclear Engineer / Technician Resume Examples & Samples
- Listens to directions and suggestions from supervisors or other employees regarding safe and proper work practices, evaluates that information, implements a plan based on that evaluation for carrying out the duties of this position
- Understands and responds appropriately to all safety hazards
- Produces high-quality work that meets the requirements of company policies, procedures, industry standards, and client expectations
- Inspects subordinate's work for compliance with the contract plans and specifications, points out deficiencies, explains and takes any corrective action needed
- Looks for ways to improve project operations and recommends as appropriate, better methods, staffing and procedural changes
- Oversees the review of new issued drawings and contract documents for change of conditions; quantify impact of changes and review; oversee the distribution of new issues to field and to necessary subcontractors
- Manages subcontracts & material contracts, manages the material control operation, oversees the writing of requisitions, follows-up with suppliers and expedites deliveries
- Makes sure costs are tracked appropriately
- Supports the preparation of daily shift costs for the superintendents
- Participates in the preparation of the monthly cost projections using information generated from management systems and the quarterly cash flow projections
- Develops a complete understanding of relationship between project’s contract documents, drawings, plans, specifications and scope of work
- Examines/inspects field conditions and identifies problems, inaccuracies, and cost saving measures that arise or that may be encountered and recommends corrective actions as needed after evaluating the project plans and specifications
- Maintains good Client relations for all technical & payment matters
- Bachelor degree in Construction Management, Mechanical, Electrical Engineering or technical diploma in Mechanical, Electrical and Construction Technology, or an equivalent combination of education, training and experience
- 5-10 years of experience
- Experience in nuclear construction
- Understands estimating and cost control systems and uses them as tools in the successful execution of the project
- Understands scheduling and demonstrate the ability to manage for early completion
- Possesses advanced professional written and verbal communication skills
- Has ability to handle multiple tasks simultaneously in a dynamic environment
- Is highly motivated, self managed to get things done right the first time
- Has ability to work extended hours and travel for work including work located in remote areas
- Has ability to work independently as well as part of a team
- Projects in a nuclear sector
- Has ability to read, analyze, and identify discrepancies on Engineering Plans, Specifications, and Contract Documents
- Is proficient in the use of Microsoft Word, Excel spreadsheets and database software applications such as Acces
51
Engineer Technician, Mid Resume Examples & Samples
- Experience with the assembly of mechanical systems
- Knowledge of engineering drawings
- Ability to interpret engineering drawings
52
Intern Lean Engineer / Technician Resume Examples & Samples
- Goal is to improve the usage rate and efficiency of the 4 manual set-ups. The expected usage improvement is 100%, with an efficiency improvement of 200%. Change over time could be improved by 50%. Tool is able to run of 24h w/o interruption, when 80 samples should be tested
- The automatic sorting allows a clear identification between non-tested parts (module), the ones that passed the test, the ones that failed because of electrical issues and the ones with contact issues
- The total budget should be recovered in 1 year production run (base on the “non-investment” of single thermo stream and magnetic setup)
- We should be able to interrupt the test of 80pcs for more urgent small tests (max 10 pcs), without major manipulation. Historical data and Control related to Lot/Quantity tested will be part of the traceability the tool should provide
53
Engineer Technician ICE Shift Resume Examples & Samples
- Performing functions associated with unit testing and test program validation including operations, equipment, process and training
- Operating, maintaining and repairing specialized processing equipment to ensure high output without compromising safety or quality
- Collecting and evaluating test data to ensure high quality test results
- Undertaking some preventive maintenance, troubleshooting, spares, and sustaining lab standards
- Conducting improvement processes, troubleshooting nonstandard events, and reviewing technological health and stability
- 2+ years of experience with some form of troubleshooting and/or debugging
- Must be able to lift up to 35 lbs., lift objects above 4.5 feet, and walk long distances
- Ability to wear closed shoes all day
- Ability to perform detailed visual inspection tasks
- Familiarity with electronic mail (any system) internet browsers, and word processing/data base software (ex: MS Words, Works)
- AA/AS or BS degree
- Two+ years of experience in a semiconductor lab environment, or equivalent experience in a class test environment preferred
- Previous preventative maintenance and troubleshooting experience on VLSI test and robotic handler equipment including analytical aptitude and mechanical debug skills
- Experience with Microsoft Office and data base entry
- Prior experience in lean manufacturing
54
Field Engineer / Technician Resume Examples & Samples
- Storage Hardware,Experienced
- Storage Management,Experienced
- EMC experience
- Break/Fix experience
55
PCB Engineer / Technician Resume Examples & Samples
- Surface-mount technology (SMT Machines)
- At least 2years of experience with machine-enabled solder reflow and assembly
- 2 years of experience with hand-soldering
- IPC-A-610and 620, J-STD-001, IPC-7711, IPC-7721
- Certifications in relevant industry standards required and IPC background ideal
- Assembly experience is a plus
- 5-8 years of related hardware engineering experience
56
Engineer / Technician, Maintenance Resume Examples & Samples
- Participation in project teams where you will test, develop and innovate our set-up
- Responsibility for planning, ordering and managing the logistics of controllers
- Testing software/firmware at product level, according to specification
- Reverse engineering to deconstruct components to study and document features, qualities and failures
- Prototyping assembly
57
Engineer Technician Resume Examples & Samples
- Prepares construction drawings for water main installation using AutoCAD from a variety of sources including field surveys, title and deed information, project engineer’s field notes, existing as-built documents, GIS information and verbal instruction
- Supports utilities location research and verification including conducting field survey using a total station and/or perform GPS capture as necessary
- Communicates closely with Main Replacement Program Manager, engineer, and district staff on project scheduling and drawing status
- Communicates with consultants and outside agencies regarding project surveying, design and drawings
- Assists with standard drawings creation and revision
- Manages multiple projects and priorities
- Participates in and supports the Company’s Continuous Improvement program and projects
- Associate degree or technical/vocational school certificate in Computer-Aided Design and Drafting (CAD), civil engineering, computer science, or related field
- Four years of experience using recent versions (within last five years) of AutoCAD or equivalent
- Experience with engineering drafting and design
- Knowledge of math, geometry, and algebra
- Proficient in the use of Microsoft Office applications
- Knowledge of water and wastewater systems preferred
- Knowledge of legal description, easements and parcel maps preferred
- Experience with AutoCAD Civil 3D in development of digital terrain modeling and plan and profile preferred
- Experience with conducting field topographic/site surveys using a total station preferred
- Experience with use of a handheld GPS unit, including data capture and post processing preferred
- Valid California Driver License
58
Engineer Technician Resume Examples & Samples
- Utilize AutoCAD to support plant layout and develop improvement ideas
- Must be able to utilize skills to analyze data from existing Excel spreadsheets and Access databases
- Must be able to perform capability studies, troubleshoot equipment, and implement solutions to correct existing root cause issues
- Support Kaizen events and determing and/or implement annual cost saving projects
- Perform any other activities as needed or as directed
- AutoCAD knowledge and experience
- Strong communication skills and ability to facilitate meetings
- Ability to observe and document work performed by others
- Experience in or exposure to manufacturing, quality, and technical environments
- Ability to observe and document process steps in automated work environment
- Trade Certification, such as Certified Quality Engineer, preferred
- Strong understanding of manufacturing processes
- Proficiency with computers and programs, specifically Excel, Word, PowerPoint, and Mini-tab
- Ability to work independently and as a team to meet deadlines and goals
59
Engineer Technician Resume Examples & Samples
- Prepares construction drawings for water system improvements including mainline replacement, site plans, grading plans, water facility structures, groundwater wells, storage tanks, pump stations, piping, treatment facilities, electrical drawings, etc. from a variety of sources including field surveys, title and deed information, project engineer’s field notes, existing as-built documents, GIS information and verbal instruction
- Support utilities location research and verification
- Conducts field topographic / site surveys using a total station and/or handheld GPS unit
- Four years’ experience using recent versions (within last five years) of AutoCAD and Civil 3D or equivalent
- Experience with AutoCAD Civil 3D in the development of contours, surfaces, profiles, volume calcs, alignments, stationing, etc
- Knowledge of legal descriptions, easements and parcel maps preferred
- Knowledge of terminology used in civil and electrical engineering drawings preferred
60
Engineer Technician Resume Examples & Samples
- Organizing work to ensure accomplishment of associated tasks including analysis, documentation and follow through
- Work from technical documents, design layout, written BKMs and/or verbal directions to complete tasks in assigned areas
- Maintain necessary records and reports. Perform other related duties as required or as directed
- Hands on electron microscopy experience and Knowledge of IC processing and de-processing or analytical laboratory techniques and tools used to identify Si process defect at different processing layers, from package to transistor
- Attention to detail, focus to execute and willingness to learn new techniques is essential
61
Field Service Engineer Technician Resume Examples & Samples
- Daily travel throughout a territory covering the Southeastern coast of Florida between Broward and Miami-Dade counties (typically a 125-mile radius) to various locations, providing on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications. Work site locations will include hospitals, industrial environments, and correctional facilities
- Prepare and maintain a record of performance reports detailing equipment serviced as well as other issues related to the event
- Analyze record of performance reports to determine the source of the problem and recommend repair, replacement, or other corrective action; determine trends affecting the future design, production, service, and maintenance processes, and recommends modifications for product life and durability
- Develop service handbooks and bulletins based on field investigations, engineering changes, and overall knowledge of the product
- Assist team members at the Virtual Imaging Headquarters with staging, installs, and repairs when demand exceeds existing resources
- Minimum of five or more years of directly related experience is required
- Strong technical background in one or more of the Medical Imaging disciplines
- Good oral and written communication skills are required, as well as the ability to interact effectively with people at all levels of an organization, both internally and externally
- ASEE degree or higher is required. (BSEE degree is preferred); equivalent degree or certification; or any equivalent combination of education, work experience, training and/or life experience that demonstrates the ability to do the job will also be considered
- Ability to work in hospitals, industrial environments, and correctional facilities is required
- Living in, or having the availability to relocate yourself to, the local Broward and/or Miami-Dade county areas of Florida is required
- Ability to travel outside of assigned territory as needed is strongly preferred
- Other skills and responsibilities assigned by your Supervisor as necessary for the operation of the business may be required
62
Engineer Technician Resume Examples & Samples
- Potential to be primary point of contact in absence of supervisor
- AS degree or equivalent experience required. Appropriate Certification (Net+ or better) BSEE- six sigma/lean preferred
- Minimum 5 years experience working with retail store systems, technology systems, and hardware
- Demonstrated knowledge of troubleshooting and repair concepts for complex analog circuits, microprocessor based computers without schematics and create schematic development
- Demonstrated proficiency working with testing equipment including Digital Multi-meters and Oscilloscopes
- Knowledge of troubleshooting concepts of PC based and POS based computer hardware
- Ability to isolate failures within and complete rework of complex electronic circuits
- Ability to perform within company quality standards
- Ability to document complex technical procedures and processes. Can on board new products for repair working with multiple departments required. Project management skills preferred
- Ability to complete replacement of all types of electronic components
- Ability to support a wide ranging variety of computer/electronic hardware
- Proactivly demonstrates initiative to complete tasks
- Ability to handle multiple requests using resources available
- Solder certification or equivalent experience required- IPC 771/7721 preferred
63
IGS Field Engineer / Technician Resume Examples & Samples
- For a level 2, 2 years with a Bachelor’s degree in a scientific, engineering, or technical discipline or 6 years in lieu of a degree
- For a level 3, 5 years with a Bachelor’s degree in a scientific, engineering, or technical discipline or 9 years in lieu of a degree
- U.S. citizenship is required
- Must be able to obtain a DoD Secret security clearance
- Possess a minimum of 2+ years of technical experience relating to hardware/software site system installation and maintenance projects
- Ability to support the maintenance, inspection, adjustments, and configuration of IGS systems
- Ability to complete training that meets or exceeds the climbing training requirements as defined in OSHA CFR 1910.268 and ANSI Z359 & Z490 (Certified or Authorized Climber status)
- Demonstrated ability to work with minimal direct supervision
- Good verbal/written communications
- Work to ensure that all site work progresses as scheduled and contract specifications and associated deliverables are met
- Maintain/repair all systems and associated IT networks, systems, and support equipment
- Perform system repairs in the field
- Develop and provide technical expertise and maintain all associated systems at the designated sites
- Draft and submit detailed Maintenance Service Reports (MSR) to include recommendations for improvements and action items derived from maintenance trips
- Familiarity with Import/Export Compliance requirements
- Knowledge of basic system logistics and supply chain
- Site selection/survey and system installation activities
64
Engineer Technician Resume Examples & Samples
- Perform special product testing, inspection and testing (Weekly/Plant Trials)
- Provide data summaries and communicate test results and issues, both written and verbally
- Provide testing support and data as required in order to meet established timelines for cost improvement, new product design, new suppliers, and process improvement projects
- Develop and implement reaction plans and work instructions
- Enter, review and summarize data in Infinity for shifts, trends, potential problems, etc
- Investigate assignable cause and corrective action for problematic issues in all areas of the plant
- Assess test equipment/gauge status for current calibration, cleanliness, wear, and/or tester issues
- Perform gauge R&R (repeatability and reproducibility) studies on new and existing test equipment
- Develop gauge verification standards and projects to analyze gauge performance
- Analyze Statistical Process Control (SPC) data to identify process improvement opportunities
- Associates or technical degree in Engineering or related field preferred
- One to three years related experience in a production/manufacturing environment preferred
- Ability to occasionally lift up to 30 lbs., sit/stand for an 8 hour day, and view parts using a microscope
- Basic computer skills including but not limited to Word, Excel and Access
- Ability to prioritize daily job tasks, organize and carry out multiple projects effectively
- Maintain a positive functional relationship with employees at all levels of the organization
- Effectively communicate feedback to engineers, operators and co-workers concerning product quality
- Ability to recognize and solve complex material and processing issues
65
Os-maintenance Engineer Technician Resume Examples & Samples
- Operate, maintain and repair boilers, heaters, pumps, valves, appurtenances, and lines used in the distribution of steam and heated or processed water
- Assist in emergencies as needed
- Maintain and repair Kitchen equipment
- Comply with Safety Regulations
- Experience with CMMS/WO management systems
- Must be able to do basic maintenance work which could include basic carpentry repair, HVAC/R, electrical and plumbing
66
Field Service Engineer / Technician Resume Examples & Samples
- Conduct tests or experiments requiring selection and adaptation or modification of equipment and procedures. Record, compile and reduce data for analysis and assist in related assessment and preparation of reports
- Troubleshoot and repair equipment, applying own knowledge and experience to resolve problems. Recommend changes such as new equipment or modified procedures to improve performance and customer satisfaction. Conduct detailed inventories and inspections to determine necessary maintenance and repairs
- Often work nonstandard schedules at field locations with exposure to varying environmental conditions. Travel required, 80% annually
- A degree in engineering is preferred
- Ability to select most effective approaches and adapt standard practices and procedures
- Strong communications skills and ability to lead less experienced staff
67
Engineer Technician, Surface Engineering, CCV Resume Examples & Samples
- Assist other engineer technicians in surveying and sampling
- Follow established survey/sample procedures
- Demonstrate knowledge of the locations of active pits, dumps, and stockpiles
- Demonstrate knowledge of radio communications procedures
- Demonstrate knowledge of blasting and blocking procedures and good communication with the powder crew
- Ability to restock survey supplies
- Develop basic map reading skills including blast hole and ore control maps
- Develop understanding of the LIMS, Drill Manager, and AutoCad systems
- Understand Sampler SOP and ability to check sample status
- Demonstrate safety leadership and safety-consciousness. Understand visibility and safety issues with haul trucks, including participating in a ride-along for first-hand knowledge
- Provide effective customer service
- Demonstrate teamwork and cooperation through honest and open communication
- Comply with state and federal health and safety regulations, company policies and procedures, and the company’s environmental polices
- Demonstrate basic PC knowledge (email, Word, Excel, and directory structure.)
- Perform light vehicle inspections. Maintain vehicles, office and storage areas
- Strong, solid work history
- Strong communication skills and ability to work with others
68
Engineer Technician Resume Examples & Samples
- Provides technical support to engineers on a variety of technical tasks. Gathers, maintains, formats, compiles, and manipulates technical data, such as component acceptance data
- Produces engineering documentation, reports, and drawings (flow charts, block diagrams, interface control drawings). Performs detailed mathematical calculations using established formulas; and quantitative judgments concerning technical data
- Uses personal computer in performance of analyses and development of documentation/reports. May conduct tests and record data to assist with engineering evaluation or analysis
- Associates Degree with 1 year related experience, Or High School Diploma with a minimum of 3 years related experience
- Substantial acquaintance with and understanding of Engineering Drawings and specifications
- Demonstrates the skill and ability to perform somewhat complex professional tasks
- Working knowledge of Computer Aided Design
- Working knowledge of Microsoft products (Word, Excel, PowerPoint)
- Experience with A-10 aircraft drawings
- Experience with ICBM specifications
- Experience with ICBM Interface Control Drawings
- Experience with Photoshop
69
Estimating Engineer Technician Resume Examples & Samples
- Minimum 4 years manufacturing experience
- Experience developing CNC programs
- Experience in estimating
- Experience with special processes, i.e., plating, welding, heat treat, etc
- Knowledge and/or experience in the design and selection of fixturing and tooling for complex parts
- Previous experience in the machining industry, job shop machining preferred
- Experience conducting process capability studies
- Experience with ISO quality systems and World Class Manufacturing principles
- Demonstrated effective interpersonal and communication skills
- Ability to perform engineering calculations related to machining
- Ability to determine the nature of problems in processes
- Experience with ERP systems
- Experience with CAD/CAM, CATIA, Solidworks or UG systems utilizing solid modeling
70
Engineer Technician Resume Examples & Samples
- Candidate should possess an AS degree with 3 years of experience with PCIE and SATA SSD burn-in and environmental testers OR 5+ years of direct industry experience with aforementioned testers will be considered in lieu of an AS degree
- 3+ years of experience in trouble-shooting, installation, maintenance and repair of Flexstar PCIE and SATA SSD burn-in/environmental testers
- Experience with PLX switch cards, NPM modules and power supplies
- Familiar with PC architecture - including motherboards, power supplies, BIOS, add-in cards, PCIE bus networks, SSDs and network protocols
- Experience in basic electronics, schematics and use of measurement equipment including: oscilloscopes, multi-meters, protocol-analyzers, data-acquisition tools, logic-device programmers and basic hand-tools
- Proficient in Microsoft OS and Office tools
- Server setup, OS installs, PC back-ups and Networking and managers
- Experience with hardware assembly, semiconductor component manufacturing and validation
71
Field Service Engineer Technician Resume Examples & Samples
- Travel assigned territory (Sacramento, CA) within an approximate 150-mile radius to various locations to provide on-site technical assistance to help troubleshoot, repair, install and maintain equipment to ensure full functionality according to specifications
- Ability to lift/push/pull up to 70 lbs
- Must live in or have availability to relocate to the Sacramento, CA area
72
IGS Field Engineer / Technician Resume Examples & Samples
- The candidate will support preventative maintenance, repair, and augment installation of the IGS equipment
- This position will require the candidate to perform technical tasks and demonstrate problem resolution actions for the IGS systems
- The candidate will also assist the IGS Integrated Logistics Specialist (ILS) with logistics support such as, but not limited to, shipping, receiving, kitting, Government Furnished Property/Equipment (GFP/GFE) inventory, and Item Unique Identification (IUID)
- The candidate will provide input to the operational analysis and quality evaluation of products and their related performance and update metrics
- The candidate will perform troubleshooting and diagnoses of malfunctions and errors to eliminate problems in minimum time
- This position will involve 25% travel to remote sites including foreign travel, so the ability to obtain a U.S. passport is required
