Production Maintenance Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the production maintenance technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

Z Willms

Zane

Willms

721 Clara Shore

Houston

+1 (555) 576 8917

721 Clara Shore

Houston

Phone

p +1 (555) 576 8917

Experience Experience

Phoenix, AZ

Production Maintenance Technician

Phoenix, AZ

Heathcote-Ziemann

Phoenix, AZ

Production Maintenance Technician

Analyzes and resolves work problems, or assists workers in solving work problems
Participate to the continuous improvement of our maintenance processes and suggest improvements to enhance equipment performance
Coordinate with multiple working groups the upcoming PM activities to ensure work is completed on-time
Recommends measures to improve maintenance methods and equipment performance
Performs preventive maintenance on process/production equipment as scheduled in the Computerized Maintenance Management System (CMMS)
Performs preventive maintenance as scheduled in the Computerized Maintenance Management System (CMMS)
Make suggestions for continuous improvement and cost savings

Philadelphia, PA

Production Maintenance Technician T-rd Shift

Philadelphia, PA

Collins-Howe

Philadelphia, PA

Production Maintenance Technician T-rd Shift

Operates a variety of equipment such as hand tools, laptop computers and diagnostic hardware to perform work
Performs preventive maintenance on mechanical systems, controls, and operating systems as scheduled in the Computerized Maintenance Management System (CMMS)
Responds to and provides service and feedback to the customer on all work orders while assuring compliance to codes, regulations and industry standards
Performs plumbing and hydraulic hose repairs
Other duties as assigned by Manager or Supervisor
Operates various measuring, diagnostic and testing instruments to help provide energy efficiency solutions
Troubleshoots, repairs, and maintains PLC controlled machines

present

Phoenix, AZ

Senior Production Maintenance Technician

Phoenix, AZ

Treutel LLC

present

Phoenix, AZ

Senior Production Maintenance Technician

present

Assist in maintaining recordkeeping and document management process with assistance of Trade Compliance team
Assist in the development and implementation of new processes into mass production
Assist team and internal partners with development and generation of KPI reports and meaningful metrics
Assist overseas offices as necessary to release Customs holds and provide necessary documentation for release
Occasionally work with outside vendors to procure new equipment and/or software to improve the production process
Work closely with multiple internal departments for process improvements
Provide guidance on INCOTERMS and assist with training on export documentation and processes

Education Education

Associate’s Degree in Initiative

University of Central Florida

Associate’s Degree in Initiative

Skills Skills

Ability to maintain a strong level of organization in a fast paced environment
Knowledge of Evertz Vistalink and Magnum configuration and operation. Ability to read and understand AutoCAD drawings
Good Communication and Interaction Skills.Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and
Knowledge of basic refrigeration theory
Ability to Present Issues / Opportunities to RFPC Staff
Comfortable working with electrical, pneumatic and laser based instruments
Ability to train less experienced team members
General knowledge of engineering principles and systems and their application in support of the maintenance function
PLC knowledge is a plus!
Mechanical aptitude and prior experience with HVAC systems in a production setting are highly desired

Create a Resume in Minutes

15 Production Maintenance Technician resume templates

Read our complete resume writing guides

Industrial Production Maintenance Technician Resume Examples & Samples

Preventative Maintenance
Operating maintenance equipment, such as lathe, mill, drill press, grinders. Welders, etc
Repairing broken machinery and equipment

Production Maintenance Technician Resume Examples & Samples

Demonstrates ability to utilize meggers, voltmeters, multi-meters, etc
Associate’s Degree or Certificate in Industrial Technology, Industrial Electrical, or Industrial Mechanical
Experience troubleshooting and repairing electrical circuits on CNC machines and equipment in an industrial environment
Experience troubleshooting and diagnosing hydraulic systems on CNC metal cutting and shaping equipment
Experience troubleshooting and diagnosing pneumatic systems on CNC metal cutting and shaping equipment
Experience troubleshooting low voltage controls
Experience troubleshooting and repairing PLCs
Experience with robotics maintenance and repairs
Experience troubleshooting and diagnosing power transfer devices, pumps and gearboxes on assembly line and process equipment

Production Maintenance Technician Resume Examples & Samples

Perform preventive maintenance on optical, mechanical, electrical and fluidics Equipment
Work with engineers and assist them to execute controlled experiments to address equipment-related yield and quality issues and drives implementation of solutions in a production environment to meet production goals
Ability to work under limited supervision and instruction to carry out routine task and new assignment

Production Maintenance Technician Rd Shift Resume Examples & Samples

Encourages joint solution resolution with manufacturing team members and encourages the transfer of basic technical knowledge where appropriate and applicable
Makes critical choices that support strategy and ultimately the end-customer
Works across organizational, functional and geographic boundaries to achieve company goals
Strong mechanical aptitude and skill demonstrated through successful work experience in a maintenance field, related training, or through a formal apprentice program in a relevant trade
Ability to rebuild, repair and/or install various types of pumps, compressors, valves, agitators, gearboxes, mechanical seals and pipefitting
Previous experience using automated work orders and job instructions desired
1604157

Production Maintenance Technician Resume Examples & Samples

Strong understanding of the applications of mechanical, electrical, electronic technology, to best practices, and knowledge of emerging technology in support of continuous improvement and innovation
Skills in fabrication, metal working. Strong troubleshooting skills in mechanical, pneumatics, hydraulics and basic knowledge of electrical motors. Ability to interact and communicate directly with operations staff to minimize impact to production activities. Basic knowledge of computer systems used in business
A High School Diploma or equivalent is a prerequisite
Minimum of 7 years of experience required
Certification in thermography, vibration or ultrasound preferred
1604158

Production Maintenance Technician Resume Examples & Samples

Coordinate with multiple working groups the upcoming PM activities to ensure work is completed on-time
Perform documented and undocumented maintenance activities
Work with instrument systems that will require electrical, pneumatic and laser trouble-shooting
Work with Vendors to schedule on-site maintenance
Make suggestions for continuous improvement and cost savings
Comfortable working with electrical, pneumatic and laser based instruments
Familiar with reading electrical and mechanical schematics
Ability to maintain a strong level of organization in a fast paced environment

Production Maintenance Technician Resume Examples & Samples

Diagnoses, troubleshoots, maintains, and repairs CNC machinery, robotic systems, pneumatic and/or hydraulic systems; and conveyor systems
Operates, maintains, and troubleshoots mechanical/electrical aspects of pumps, bearings, blowers, fans, gearboxes, and other equipment as required
Conducts preventive maintenance inspections and perform required preventative maintenance actions such as lubrication, cleaning, filter changes, alignments, etc
Performs plumbing and hydraulic hose repairs as needed
Associate’s Degree or Certificate in Industrial Technology, Industrial Electrical, Industrial Mechanical, or a related program
Experience troubleshooting, performing preventive maintenance, and repairing Fanuc robots, Liebherr gantry systems, and ABB robotic systems
Experience working safely with 480V 3-phase electrical systems
Experience working safety around industrial heat treat equipment, including furnaces, conveyors, and pillar induction systems
Experience working safely around CNC machinery

Production Maintenance Technician Resume Examples & Samples

Diagnoses, troubleshoots, maintains, and repairs all production-related equipment onsite, and performs maintenance on facilities equipment, including automatic dolly conveyor systems, pneumatic and/or hydraulic systems and facilities HVAC system, as required
Conducts preventive maintenance inspections and performs required preventative maintenance actions such as lubrication, cleaning, filter changes, alignments, etc
Requires the ability to move in a 90-degree fashion on a repetitive basis for shift
Requires the ability to walk extensively throughout the plant during shift
Requires the ability to differentiate colors pertaining to wire color-coding
Some tasks will require repetitive wrist movement
Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress
Associates Degree in Industrial Technology, Industrial Mechanical, Industrial Electrical, or related program. Advanced PLC experience, including troubleshooting and making program changes, with Siemens S7-300, Allen Bradley, PLC-5, 500, and/or RS-5000
Experience diagnosing, troubleshooting and repairing industrial production systems such as fluid transfer systems, conveyors, and coolant systems to OEM specifications
Experience working with HVAC controls and mechanical systems

Production Maintenance Technician Resume Examples & Samples

Diagnoses, troubleshoots, maintains, and repairs CNC machinery, robotic systems, pneumatic and/or hydraulic systems; conveyors; overhead cranes
Troubleshoots and repairs basic electrical issues
Performs preventive maintenance on, mechanical systems, controls, and operating systems as scheduled in the Computerized Maintenance Management System (CMMS)

Senior Production Maintenance Technician Resume Examples & Samples

Make software modifications as needed
Answer production service calls in a timely manner
Diagnose and repair faulty equipment
Record repairs of faulty equipment
Perform preventative maintenance on equipment
Provide leadership for the maintenance team in the group leader's absence
Support engineering staff in the development of new processes for manufacturing
Provide input as needed when equipment is purchased or upgraded
Occasionally work with outside vendors to procure new equipment and/or software to improve the production process
Assist in the development and implementation of new processes into mass production
Build tables, frames, fixtures, etc. for production processes
Order and inventory spare parts
Evaluate equipment failure records for implementation of preventative maintenance tasks
Assist in the installation, modification and relocation of equipment
Evaluate new equipment records for creating recommended PM schedule and spare parts list

Production Maintenance Technician Resume Examples & Samples

Work is completed with minimal supervision and assignments may be completed without established procedures or instructions
Ability to execute complex assignment and provide in-depth technical knowledge to resolve problem and recommend solutions
Provide guidance to other technicians on equipment issues

Senior Production Maintenance Technician Resume Examples & Samples

Act as SME and primary point of contact for daily export operational activities
Assist overseas offices as necessary to release Customs holds and provide necessary documentation for release
Classify Illumina products with HTSUS and ECCN
Assist Trade Compliance team with export training and documentation
Assist team and internal partners with development and generation of KPI reports and meaningful metrics
Support Trade Compliance team in creation and maintenance of SOP’s, desktop procedures and work instructions
Support daily export operations to clear any export holds and act as SME for export management system
Work closely with multiple internal departments for process improvements
Provide guidance on INCOTERMS and assist with training on export documentation and processes
Assist in maintaining recordkeeping and document management process with assistance of Trade Compliance team
Support trade compliance audit processes
Participate in global trade compliance process improvement initiatives

Production Maintenance Technician Resume Examples & Samples

Diagnoses, troubleshoots, maintains, and repairs robotic systems, pneumatic and/or hydraulic systems; conveyors; overhead cranes; Mazak, Haas and GNL machining centers; and robotic welders
Troubleshoots and repairs heat exchange / foundry equipment
Develops and monitors work assignments for other technicians and coaches as appropriate
Creates and modifies site operations procedures for equipment and recommends facilities reliability improvements
Exhibits strong leadership skills, such as motivation, delegation, ownership, leading by example, well-developed organizational skills, excellent communication skills, etc
Able to utilize Time Management Principles for effective workforce planning and accomplishing strategic benchmarks outlined by site management group
Associates Degree in Industrial Technology, Industrial Electrical, Industrial Mechanical, HVAC or related program

Production Maintenance Technician Resume Examples & Samples

Assembles medical products on an assembly operation, performing a variety of tasks on a rotating basis
Ability to rotate through the assembly line
Performs on-line and in-process visual inspection of products to ensure specifications per work order and procedure are followed
Assists Team Leader and Technicians with product and/or machine change-overs
Ensures product assembled meets quality standards
Rejects product outside of specifications
Adheres to safety standards
May operate a variety of testing equipment required for periodic product and process testing
Performs other related tasks, as required
Education and/or experience equivalent to a high school diploma or certificate of leaving
Demonstrates competencies and ability to rotate in a specific assembly line or work cell
Ability to perform a variety of assembly tasks requiring dexterity and fine motor skills
Ability to visually check work performed and identify whether a product has been assembled correctly
Ability to follow instructions in performing repetitive tasks
Attentiveness in performing tasks
Ability to work as a team member in assembling sterile medical products
Ability to meet line rate expectations
Six months of experience

Production Maintenance Technician Resume Examples & Samples

PLC knowledge is a plus!
Mechanical aptitude and prior experience with HVAC systems in a production setting are highly desired
Prior foundry experience is a bonus!
Diagnoses, troubleshoots, maintains, and repairs CNC machinery, robotic systems,pneumatic and/or hydraulic systems; conveyors; overhead cranes; Mazak, Haas and GNL machining centers; and robotic welders
Troubleshoots and repairsheat exchange / foundry equipment
Safely operates fork-lifts, hoists and cranes
Utilizes safe rigging and lifting techniques
Recommends measures to improve maintenance methods and equipment performance
Associates Degree in Industrial Technology, Industrial Electrical, or related program

Production Maintenance Technician Resume Examples & Samples

Assists the team with planned preventive maintenance on production machines and equipment
Assists the team with planned preventive maintenance of electrical, hydraulic and pneumatic systems
Conducts planned preventive maintenance inspections and performs required preventative maintenance actions such as lubrication, cleaning, filter changes, etc
Performs planned preventive maintenance tasks scheduled in the Computerized Maintenance Management System (CMMS). Review and submit work order updates to planner scheduler
Associate’s degree or technical certification in industrial mechanical, HVAC/R, manufacturing technology, or a related technical program
Strong mechanical skills, sufficient to assist with and perform preventive maintenance and repairs to facility and production related mechanical equipment
Basic understanding of electricity
Experience with heating equipment properties, sufficient to assist with and perform preventive maintenance and repairs to HVAC equipment

Production Maintenance Technician Resume Examples & Samples

Experience troubleshooting CNC machine tools, including but not limited to: Mazak, Haas, and GNL
Experience diagnosing, troubleshooting and repairing industrial production systems such as furnaces and foundry equipment, conveyors, and coolant systems to OEM specifications
Experience troubleshooting robotic control systems, such as Fanuc, ABB, etc
Experience diagnosing, troubleshooting, and repairing pumps, motors, gearboxes, supply and exhaust fans, power transmission components, hydraulic and pneumatic systems, including pneumatic handling systems

Production Maintenance Technician Resume Examples & Samples

Repair, maintain and improve production equipment, plant equipment and related facilities as required – create work orders for work done
Bench work (rebuild hydraulic cylinders, repair buggies-carts, etc. as time allows)
Implement planned work orders, Preventative Maintenance (PMs), and special projects
Assist Manufacturing Engineering team in determining and documenting root cause analysis of equipment problems
Assist all others on flexible basis
Maintain a safe working environment
Provide communication to other departments, as required
Work overtime hours (weekends and factory shutdown periods) as required
Maintain personal 5S area
Participate in TPMs and/or Kaizens as needed
Regular on-site attendance is required
Other duties as assigned by Lead Maintenance Tech
2-year Technical Degree (Required)
Minimum of 3 to 5 years’ experience in Maintenance
Minimum of 3 to 5 years’ experience in a Manufacturing Environment
Good Communication and Interaction Skills.Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and
Ability to understand and troubleshoot hydraulic, pneumatic, electrical controls, PLC’s and HVAC systems
Experience reading and interpreting hydraulic, pneumatic and electrical schematics including blueprints
Have some working knowledge of National Electrical Codes, and perform work to comply with OSHA and EPA standards. Must possess working knowledge of machine shop techniques
Basic experience with mechanical and electrical equipment in use at RFPC, including hydraulic and pneumatic valves, cylinders, pumps and motors, electrical controls
Ability to operate machines, hand-tools, and electronic testing equipment
Proficient use of multi-meter
Minimum basic knowledge of vibration analysis, thermal imaging and shaft alignment tools
Proficient in welding, cutting, and sheet metal fabrication
Ability to follow procedures outlined in Work Order system software
Ability to work any shift
Compliance of safety guidelines
Ability to work with a team committed to the continuing excellence of the Maintenance Department
Attitude of continuous improvement required

Production Maintenance Technician Resume Examples & Samples

Perform routine maintenance, corrective as well as preventive maintenance
Assist and support shift equipment engineer to oversee production line
Managing spare part inventory
Identify, involve and improve equipment performance
Preferably to have experience in packaging equipment, heat sealer, automated tube/bottle filling equipment, pumps (piston & peristaltic) and laser etch equipment
Experience in AMMS (Advance maintenance management system) and SAP will be a plus
Require basic knowledge of Microsoft Office (Words, Excel and Powerpoint)

Production Maintenance Technician Resume Examples & Samples

The engineer will primarily focus on the Post Production Avid edit and storage, Graphics and Amberfin systems
Provide support for the 24x7x365 Broadcast facility consisting of a mixed IP and baseband transmission environment
Communicate with, understand and intelligently interface with various internal operating groups that include but are not limited to: Post Production, Broadcast Engineering and Operations, as well as various other technical and operating groups both internal and external
Handle in depth configuration, system and hardware troubleshooting using in depth knowledge of Avid non-linear edit systems, Avid NEXIS storage and workflow systems
Identify and isolate network or signal flow problems, as well as install and configure complex post production video and audio processing system
Avid ProTool and audio plugins support experience including S6 consoles and MTRX hardware
Avid Interplay ACSR support experience a plus
Functional knowledge of the following graphics software packages: Adobe Creative Cloud 2016, Maxon Cinema 4D, AutoDesk Entertainment Creation Suite, Nuke and 3rd party plugins including Boris, Genarts, Video Copilot and more
VMware ESXi 6.0 understanding and basic troubleshooting skills desired
Support experience for ancillary equipment such as disk recorders
Familiar with video and audio signal formats such as 1080i, 720p, UHD/HDR and the various frame rates associated with these formats
Able to demonstrate proficiency in the application and use of digital television test equipment such as WFM/VS, EEG, Omnitek Ultra XR, rasterizers including Phabrix and Leader
Knowledge of Evertz Routers, Harris automation systems, Chyron character generator and Harmonic playout server a plus
Knowledge of Evertz Vistalink and Magnum configuration and operation. Ability to read and understand AutoCAD drawings
Strong understanding of the following operating systems: MAC OSX, Windows 7, 10, Linux and Windows 2008 and 2012 server
Strong understanding of IP routing concepts, Active Directory and DNS

Production Maintenance Technician Resume Examples & Samples

Ensure preventive and curative maintenance of technical systems which are under the responsibility of the aseptic production
Ensure repairs, adjustments, installations and changes needed for aseptic manufacturing equipment according to planning
Communicate all anomalies to the Maintenance Manager
Follow-up and train subcontractors
Participate to the continuous improvement of our maintenance processes and suggest improvements to enhance equipment performance
Review and write SOPs
Ensure presence on site for technical interventions
Enforce quality systems, standards (GMP, FDA, ISO...) and processes in place
A1/A2 diploma in electromechanics or equivalent by experience
Experience in a maintenance deparment, in a maintenance or production company focused on health and safety (food/pharma)
Experience with HVACs and aseptic production equipment is a strong asset
Fluent in French, English is an asset

Production Maintenance Technician T-rd Shift Resume Examples & Samples

Conduct preventive maintenance inspections and perform required preventative maintenance actions such as lubrication, cleaning, filter changes, alignments, etc
Advanced PLC experience, including troubleshooting and making program changes, with Allen Bradley, PLC-5, 500, and/or RS-5000
Experience with alignments and timing machines using Precision calibration tools
Experience troubleshooting and repairing cranes and hoists

Production Maintenance Technician Resume Examples & Samples

Works with engineers and others during the building and installation of new equipment to ensure attention
Technically identifies and supports process optimization through equipment design improvements, changes
8 years practical and comprehensive knowledge required
Ability to modify or develop control logic to enhance equipment performance
Requires advanced knowledge of electrical, mechanical and pneumatic systems
Ability to read and understand mechanical, electrical drawings, flowcharts, and/or other drawings of a technical

Download Production Maintenance Technician Resume Sample as Image file