Shop Technician Resume Samples
4.8
(134 votes) for
Shop Technician Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the shop technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
EP
E Pagac
Ewell
Pagac
26382 Emanuel Meadows
Chicago
IL
+1 (555) 297 6986
26382 Emanuel Meadows
Chicago
IL
Phone
p
+1 (555) 297 6986
Experience
Experience
Phoenix, AZ
Shop Technician
Phoenix, AZ
Kuhlman-Daugherty
Phoenix, AZ
Shop Technician
- Performs safety inspections of equipment and documents the work
- Assisting with timing and continuous improvement exercises
- Service and repair work is performed both in the shop and in the field at the job site or customer’s facility
- Works with other technicians in performing preventative maintenance and repairs
- Documents work performed, prepares vehicle records and reports in writing and electronically
- Works with other technicians or independently in performing preventative maintenance and repairs
- Maintains work area and other areas in a clean and orderly condition. Performs additional duties after training
Dallas, TX
Print Shop Technician
Dallas, TX
Stracke, Grady and Casper
Dallas, TX
Print Shop Technician
- Ensures convenience copiers are working properly, checking for quality via daily inspections. Clears paper jams and informs technicians of specific problems
- Runs high volume copy machines and performs binding and finishing work
- Cost recovery, allocation management, asset management
- Performs filing duties, which may include 'purging' and archiving old documents
- Performs all repair service on customer copier equipment
- Uses shrink-wrap machine, paper cutter, hole driller, bindery equipment, jogger, tape machine, stackers, electric stapler and scales in completion of various jobs contracted
- Performs duties related to the shipping of materials
present
Philadelphia, PA
Shop Technician Supervisor
Philadelphia, PA
Baumbach, Wintheiser and Toy
present
Philadelphia, PA
Shop Technician Supervisor
present
- Effective management of the workshop personnel
- Work with LEAD department and all workshops to ensure best practice
- Use gauging devices and perform various quality inspection type procedures
- Calibration-Certification of Accuracy Testing duty includes performing and documenting the actual testing/calibration of product
- Monitor workshop staff to ensure procedures are being adhered to
- Work from drawings, maintenance manuals and manufacture specifications
- Maintain housekeeping standards within the workshop, yard and storage areas
Education
Education
Bachelor’s Degree in Electrical
Bachelor’s Degree in Electrical
Loyola Marymount University
Bachelor’s Degree in Electrical
Skills
Skills
- Ability to comprehend the basic processing of company equipment
- Knowledge of shop practices, machines, and related equipment
- Be accountable for the pre-flight (assembly/programing) of our equipment for customer delivery
- Basic business math
- Excellent organizational and management skills
- Proficient with MS Office Suites (Excel, Word)
- Upon completion of pre-flight or refurbishing of the equipment, perform a full inspection, check all functions are working properly, and obtain management approval for reinstatement of the equipment into field for customer use
- Attention to detail
- Good communication
- Remove, recycle, and reuse parts from machines in the warehouse to fix down/ broken customer machine(s) when the parts requested are unavailable in timely manner
15 Shop Technician resume templates
Read our complete resume writing guides
1
Children s Center Rental Shop Technician Resume Examples & Samples
- Demonstrates product presentation and has full knowledge of all features of product line - alpine and snowboard equipment
- Full knowledge of the entire children's center operations
- Must pass the required binding certification for VA rental shop products
- Performs other duties as assigned by rental shop lead or supervisor
- Previous rental shop experience - required
- Basic skiing and snowboard terminology - required
- Ability to pay attention to details - preferred
- Basic computer knowledge - preferred
2
Crate Shop Technician Resume Examples & Samples
- Reads and processes crate designs to given specifications
- Operates power tools and related equipment to manufacture individually designed wood crates for the handling, packing, and shipping of art
- Operates a sprayer for water based adhesives, paints, and lacquer
- Contours insulation and cushioning foams and prepares inner packing materials according to a variety of design specifications
- Performs shop maintenance and other incidental and related duties as required and assigned
- A minimum of three (3) years of previous crate shop and/or production carpentry experience required
- Must be able to read production design paperwork
- Knowledge of general shop safety and the following power tools and their recommended safety requirements: table saw, radial arm saw, panel saw, belt and orbital sanders, pneumatic staplers and nailers, biscuit joiners, band saws, power drills
- Excellent precision and attention to detail, an understanding of archival materials, museum specifications for the crating and packing of museum objects considered a plus
3
Children s Rental Shop Technician Resume Examples & Samples
- REQUIRED: Resume and TWO letters of Professional Recommendation
- Must be 18 years or older - required
- Successful completion of the Background Check - required
- Must be able to work weekends and holidays - required
- Applicants must be able to work through April 10, 2016 - preferred
- Previous experience and desire to work directly with children - preferred
- Must have guest service experience - required
- Knowledge of ski/snowboard equipment - preferred
- Willing to be outside in adverse winter conditions - required
- Must be able to stand for long periods of time - required
- Must be able to read, write, speak, understand and comprehend English fluently - required
- Able to communicate in Spanish - preferred
4
Shop Technician Resume Examples & Samples
- Set-up of new equipment as assigned by operations department
- Responsible for all paperwork associated with set-up
- Responsible for assisting field technicians with parts and service manual questions
- Responsible for tracking all set-ups
- Responsible for overall cleanliness of set-up area
- Responsible for checking on incoming demos and wrapping after
- High school diploma or equivalent education
- Valid and clean driver's license
- Individual should be physically fit and be able to lift object weighing up to 80lbs on occasion as well as walk and remain standing for long periods of time
- Previous experience in a warehouse environment a plus
- Ability to drive 15 foot box truck
5
In Shop Technician, Cummins Mid South Resume Examples & Samples
- Respond to customers courteously and professionally
- Involve the Service Manager to assist in answering customer’s questions when necessary
- Coordinate with Service Manager to correct customer demands or complaints in a timely and responsive manner
- Achieve and maintain technical competency and currency
- Possess detailed technical knowledge of all products or services offered
- Diagnose complaint or problem
- Perform all repairs in accordance with published directives
- Participate in scheduled training classes
- Complete technical update training (MailPacs)
- Correctly operate all personal and special tools, testing and diagnostic equipment
- Advise Service Manager of required parts
- Perform professional quality shop or field service repairs consistent with company standards
- Maintain a safe work area by keeping it clean and orderly
- Maintain adequate personal tooling to perform assigned tasks
- Intermediate to advanced level knowledge of and/or experience with engine products
- Vocational diploma from relevant technical institution (preferred) or related work experience
- Apprentice Trained Engine Technician (preferred)
6
In Shop Technician Resume Examples & Samples
- Ability to operate all machine tools and testing equipment
- Minimum typing speed of 60 wpm
- Familiar with operation of all standard office equipment; personal computer, printers, fax machines, copiers, mailing machines, etc
7
Service Technician, / Shop Technician Resume Examples & Samples
- Inspect, service, test and maintain suppression cylinders. Repair fire extinguishers, system cylinders, and DOT specified cylinders. Maintain all required documentation associated with testing and maintenance
- Track repairs, product and shop inventory
- Maintain logs for paperwork associated with Department of Transportation (DOT), HAZ-MAT and safety for shop as well as vehicles
- Process technician orders including data entry into the accounting program. Record keeping used to order and disburse materials and service performed in the shop
- Running local deliveries, repair of emergency exit lights and inspecting portable fire extinguishers
- A work history that demonstrates stability with 5 - 10 years mechanical, electrical. life safety or fire suppression experience
- State of Florida fire equipment permit preferred. Must be able to obtain within 90 days of hire
- Possess or be able to obtain and retain any licenses that are required by Nat'l, State and Local Codes
- Must have a valid drivers license that meets company requirements
- Must be able to lift 50+ pounds
8
Shop Technician Resume Examples & Samples
- Performs preventative and routine maintenance on tractors, trailers, forklifts, and other equipment (which will include the use of diagnostic equipment)
- Diagnoses cause of malfunctions and performs repairs from preventative maintenance up to component replacements
- Diagnoses and trouble shoots general vehicle operating systems
- Documents work performed, prepares vehicle records and reports in writing and electronically
- Works with other technicians or independently in performing preventative maintenance and repairs
- Performs necessary adjustments in equipment to ensure safe and efficient operations and prepares required safety documentation
- Performs paint and body work on vehicles, as required
- Comply with all applicable laws/regulations, as well as company policies/procedures
- Must have a minimum of three (3) years’ experience performing vehicle maintenance; a heavy duty vehicle maintenance certificate obtained from an accredited vehicle maintenance vocational/trade school may substitute for one year vehicle maintenance experience
- Medium/Heavy Truck Master ASE Certification preferred
- Class A CDL preferred
- Brake Inspection Certification eligible
- Must possess necessary tools to perform assigned tasks
- Valid driver’s license may be required depending on work assignment
- Computer skills including email, maintenance programs, and diagnostic systems
- Thorough knowledge of late model gas and diesel engines and on-board computers
- Experience using oxygen/acetylene equipment (cutting, heating, bending, fabricating equipment during repair)
- Experience using lifting devices (bottle, floor, wheel, or transmission jacks, floor cranes, etc.)
- Experience using precision measurement instruments (micrometers, dial indicators, electronic multimeters/testers, A/C charging station, etc.)
- Able to frequently lift components weighing approximately 110 pounds with appropriate equipment and/or assistance from another person
- Ability to safely operate vehicles equipped with manual and automatic transmission
- Ability to enter and exit the driver’s compartment of the truck and/or behind cab using normal available footholds and handholds
- If paint and body work duties required, experience required
- If forklift repair duties required, prior forklift repair experience required
- Ability to follow instructions and complete required training
- Ability to work independently and/or as a team member
9
Shop Technician Resume Examples & Samples
- Performs preventative and routine maintenance on tractors, trailers, forklifts, and other equipment (which may include the use of diagnostic equipment)
- Works with other technicians in performing preventative maintenance and repairs
- Prepares records and reports both in writing and electronically
- Performs safety inspections of equipment and documents the work
- Moves parts to and from the job site and removes or installs these parts on vehicle
- Must have one (1) year experience performing vehicle maintenance or either possess, or be within sixty (60) days of obtaining, a heavy duty vehicle maintenance certificate from an accredited vehicle maintenance vocational/trade school
- Knowledge of the use and operation of power, trailing and testing equipment, gauges and tools normally associated with troubleshooting and repair of industrial hydraulic, electrical, and diesel equipment
- Basic computer skills including email, maintenance programs, and diagnostic systems
- Basic knowledge of late model gas and diesel engines and on-board computers
- Experience using oxygen/acetylene equipment (cutting, heating, bending, welding, fabricating equipment during repair) preferred
- Experience using lifting devices (bottle, floor, wheel, or transmission jacks, floor cranes etc.)
- Experience using precision measurement instruments (micrometers, dial indicators, electronic multimeters/testers, A/C charging station etc.) preferred
- Ability to enter and exit driver’s compartment of truck and/or behind cab using normally available foot and handholds
- Basic written and verbal communication skills
10
Shop Technician Resume Examples & Samples
- Repairs, modifies and performs preventive maintenance inspections; troubleshoots vehicle fleet including tractors, trailers, forklifts and other equipment
- Analyzes and diagnoses source of trouble, disassembles equipment and performs repairs and/or replaces or rebuilds all components and systems
- Makes necessary adjustments in equipment for safe and efficient operation and prepares required safety documentation
- Provides guidance and mentoring to lower-level technicians when required
- Ensures proper and accurate documentation of all maintenance performed, completes reports in writing and electronically
- Performs safety inspections of equipment and prepares required safety documentation
- Must have a minimum of five (5) years’ experience performing vehicle maintenance; a heavy duty vehicle maintenance certificate obtained from an accredited vehicle maintenance vocational/trade school may substitute for one year vehicle maintenance experience
- ASE Certification in Brakes, Electrical, PMI and Diesel Engines required
- Must possess proficient computer skills including email, maintenance programs, and diagnostic systems
- Must possess in-depth knowledge of late model gas and diesel engines and on-board computers
- Ability to safely operate vehicles equipped with manual or automatic transmissions
11
Shop Technician F Resume Examples & Samples
- Assist in troubleshooting, inspecting, Removal & Replacement,Repairs, Install Radar/Fire control systems
- Assist in troubleshooting, inspecting, Removal & Replacement, Repairing electrical wiring and coax/triax cables Perfoms OJT traini ng with assigned trainees as required
- Perfoms OJT traini ng with assigned trainees as required
- Uses power/non power AGE equipment
- Knowledge of OJT Training and Documentation
- Working Knowledge of T.O.'s, Maintenance Manuals and I PB's
- Working Knowledge of handling confidential classified equipment
- 5 years experience with a minimum of 1year as a 7 level on F-15 Aircraft
12
Print Shop Technician Resume Examples & Samples
- Must have or be able to obtain a secret clearance
- Physical requirements: Must be able to lift 50 pounds, be able to stand for several hours, as well as bend and stoop repeatedly
- Must have good attention to detail and ability to follow technical instructions to operate and perform basic maintenance on printer
- Experience with MSOffice 2013/2016 Applications
13
Mid-level Engine Shop Technician Resume Examples & Samples
- Support all aircraft at the Flight Operations test facility and Airframe and Power plant Specialists as needed
- Perform or evaluate engine rebuilding, engine trouble shooting, fault isolation, propeller balancing, over speed testing, and running engine test stand
- Perform or oversee scheduled and unscheduled maintenance of prop stand, prop stand fuel, water and oil systems
- Wiring of engine ignition system
- Performs housekeeping and cleanup duties as required
- Must be able to work with common hand tools
- Must be able to perform a variety of routine tasks and demonstrate a good working knowledge of laboratory equipment and procedures
14
In Shop Technician, Cummins Central Power Resume Examples & Samples
- Two year diesel diploma/certificate or equal years experience in repair of diesel engines
- Detailed knowledge and understanding of diesel engine theory and operation
- Ability to use computer and windows based programs such as Quick Serve On-line, INSITE, and others
- Able to accurately read and follow instructions
- Strong communication skills (verbal/written)
- Have own tools and toolbox
15
Lead Shop Technician Resume Examples & Samples
- Apply knowledge of routine work area procedures
- Complete standardized activities
- Resolve task related problems in straightforward situations
16
Motor Shop Technician Resume Examples & Samples
- Troubleshoot, test, assemble, disassemble and perform visual inspection of mechanical assemblies
- Assist in reworking and repairing of equipment
- Provide coaching to other technicians in areas of proven competence
- Must have the ability to lift up to 50 lbs. on a regular basis
- 1 plus years of experience utilizing overhead cranes, forklifts and mechanical hand tools
- 2 years of experience in the use of measurement, gauging equipment and measurement processes
- Technical diploma or Associates degree in a Mechanical field
- Ability to read and interpret blueprints, assembly prints and manuals
17
Sign Shop Technician Resume Examples & Samples
- Read and interpret signage work orders
- Determine the best fabrication methods and materials needed
- Communicate with clients to achieve desired results
- Organize daily and weekly activities in design, production, and installation
- Understand internal capabilities and assist in determining if signage work should be done “in-house” or contracted to specialty providers
- Support and maintain all sign shop equipment, including computer, plotters, and printers
- Take initiative & work with little or no supervision
- Experience with Adobe Illustrator and CorelDraw
- Experience with vinyl creation & application
- Experience with Roland Cutters, Printers, and Engravers
- Strong Computer skills and design creativity
- Comprehensive knowledge of Maximo and CIM Visual Planner, preferred
- Excellent computer skills, including a working knowledge of Word, Excel, Maximo, and MS Project
- Knowledge of cGXP procedures
- Knowledge of building systems and equipment reliability
- Ability to read and interpret documents and drawings, and use maintenance libraries
- Ability to work in a fast-paced, demanding environment and master new skill sets quickly
18
Rebuild Shop Technician Resume Examples & Samples
- Complete assigned jobs and task to meet flat rate times and re-do metric
- Complete related paperwork and access databases require to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely
- Remove and install parts, disassemble and assemble components, and test and adjust assemblies with minimal supervision
- Diagnose and troubleshoot problems, give recommendations for repairs
- Minimum of 2 years related experience and/or training; or equivalent combination of education and experience
- Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals
- Uses intuition and experience to complement data
- Identifies and resolves problems in a timely manner
19
Container Shop Technician Resume Examples & Samples
- Performs inspections, conduct diagnostic tests, preventative maintenance, and repairs on varied types of compactors, and other stationary equipment
- Reads electrical schematics. Diagnoses and repairs electrical problems on equipment using both single and three phase AC voltage -- including working with high-voltage electricity
- Reads hydraulic schematics. Diagnose and repair hydraulic issues on equipment
- Maintains knowledge of proper installation of compactors, and other types of stationary equipment. Perform or assist with installations as scheduled and meets relevant deadlines
- Performs welding and fabrication work as needed
- Ensures and maintains efficiencies so that all scheduled jobs can be handled in a given day
- Completes paperwork and/or enters data associated with repairing relevant equipment in an accurate and timely manner
- Equipment maintenance and repair experience
- Basic computer skills as demonstrated by knowledge of and ability to use MS Excel and word processing applications
- Knowledge of basic and advanced hand tools
- During employment, a Technician will complete Company training and safety programs
20
Shop Technician Supervisor Resume Examples & Samples
- Effective management of the workshop personnel
- Ensure all HSEQ rules and regulations are communicated and enforced
- Review and approve facility services invoices
- Coordinate the delivery and logistics of equipment to rental customers
- Maintain quality records for rental equipment that is
- Utilize Oracle to track and ship assets being used on all assigned rental and service projects
- Maintain housekeeping standards within the workshop, yard and storage areas
- Liaise with Asset Management to communicate stock availability issues
- Order spares and consumables to maintain sufficient stock levels
- Work with LEAD department and all workshops to ensure best practice
- Carry out appraisals on workshop personnel
- Carry out and maintain risk assessments
- Ensure all MSDS data sheets are in place and up to date
- Monitor efficiency of workshop personnel
- Monitor workshop staff to ensure procedures are being adhered to
- Ensure correct maintenance of all workshop equipment i.e. Forklifts etc
- Ensure correct training is available to relevant personnel and records are kept up to date
- Maintain sickness and holiday records
- Communicate manpower disciplinary issues to line manager and Human Resource Department
- Communicate company and HR announcements to all workshop personnel
- Ensure all local rules are enforced
- Repair of equipment includes disassemble, inspect, troubleshoot, replacement of parts, reassemble, check and perform operational test
- Fill equipment request orders including job preparation and truck loading
- Follow up with internal and external customer questions and concerns via telephone or email
- Diagnose and troubleshoot equipment repairs and document all repairs maintaining high level of organization
- Management of repair part stock levels within area
- Initiate purchase requisitions and follow up order of parts to complete equipment repairs
- Responsible for product traceability; Hydratight assets and customer property
- Calibration-Certification of Accuracy Testing duty includes performing and documenting the actual testing/calibration of product
- Required to attend and pass training courses
- Work from drawings, maintenance manuals and manufacture specifications
- Use gauging devices and perform various quality inspection type procedures
- Competent in the use of portable hand held tools (e.g. electric/pneumatic drills/screw drivers
- High School graduate or GED equivalent Required - Associates Degree Strongly Preferred
- Ability to operate forklift and overhead crane
- Knowledge of electrical schematics, circuits and use of an electrical multi-meter
- Basic understanding of Mechanical systems and use of hand tools
- Strong Computer skills i.e. Oracle, Microsoft Word, Microsoft Office, etc
- Ability to gain a Transportation Worker Identification Credential (TWIC) Card
- Works to tight deadlines
- Commitment to change and continuous improvement; Ability to identify weaknesses in process and implement improvement procedures to correct
- Strong interpersonal skills; Communicates well face to face, by telephone and in writing
- Supports and assists colleagues – team player
- Flexible approach to working hours; Works with minimal supervision
- Confident and assertive – deals well with conflict
21
Suppression Shop Technician Resume Examples & Samples
- 1-2 years experience preferred
- Mechanically inclined and be able to lift 75 lbs
- Customer focused and team oriented
22
Shop Technician Resume Examples & Samples
- Ensure adherence to Workplace Safety, Environmental, National Safety Code, Trican Well Service Ltd, government, as well as client policies and regulations
- Perform basic maintenance and various mechanical duties under the supervision and direction of shop staff
- Ensure shop is clean and organized
- Report any mechanical deficiencies or other areas of concern to appropriate shop staff
- Operate all equipment in a safe and responsible manner
- Participate in identifying safe and unsafe work practices; building on safe situations and correcting unsafe ones
- Make decisions concerning prioritization in accomplishing assigned task
- Experience in a service shop environment is an asset
- Ability to perform work accurately and thoroughly with a high attention to detail
- Ability to work at a fast pace and produce quality work
- Comprehensive technical and practical knowledge of operations, products, company policies, and government regulations
- Admirable interpersonal skills conveyed in a pleasant and professional manner when interacting with employees, management, and customers
23
In Shop Technician, Cummins Central Power Resume Examples & Samples
- Provide excellent internal/external customer support encompassing “Customer Support Excellence” philosophy and standards
- Perform troubleshooting and complete repair on engines, chassis and sub-assemblies within a reasonable and expected time frame while maintaining a high level of quality workmanship
- Efficiently Rebuild engine components
- Successfully complete all Cummins required training courses
- Participation in actively keeping work areas clean and safe at all times
- Adherence to the Cummins Business Code of Conduct including setting an example of ethical behavior
- Effectively create, maintain, and develop positive internal/external customer relationships
24
Belt Shop Technician Resume Examples & Samples
- Assist in all conveyor belt shop issues that relate to warehouse functions
- Operating belt slitter
- Reading of written instructions for cutting conveyor belt products and miscellaneous rubber goods
- Assisting in all other warehouse duties
- Coupling hose
- Marking all rubber goods items with proper tacking numbers and dimensions
- Experience in industrial rubber goods business
- Must have conveyor belt slitter experience
- Acceptable driving record and valid drivers license
- Experience with both pneumatic and manual hose couple devices required
- Must be able to pass a drug screen
25
Oxygen Shop Technician Resume Examples & Samples
- Must have completed a recognised aircraft engineering apprenticeship or similar qualification in military aircraft airframe engineering and/or repair
- Must have completed Aircraft Type Specific training on Third or Fourth Generation military fast jet aircraft in an Airframe discipline
- Extensive proven post qualification experience of military fast jet maintenance support, at a Technician level within an operational military flying environment
- Extensive Proven experience in an Airframe discipline on a Fourth Generation military fast jet aircraft (may be concurrent with the above)
- A comprehensive knowledge and understanding of aircraft oxygen and environmental control systems. Previous Typhoon aircraft system knowledge would be advantageous
- Completion of formal training, manufacturers’ courses or previous experience in the maintenance of aircraft oxygen and associated gaseous equipment systems desirable
- Previous experience in aircraft component repair and overhaul including fault diagnosis, servicing and maintenance of assemblies and sub-assemblies
- Specific area of aircraft environmental control systems, oxygen and/or gaseous system components and breakdown parts highly desirable
26
Shop Technician Resume Examples & Samples
- Clean Mechanical and Fluid Power Department
- Learn Mechanical and Fluid Power
- Rigging
- Media blasting
- Bead blasting
- Bridge crane operation
- Vehicle certification
- Caustic Soda Cleaning Tank Operation
- Preparation work for prime and paint
- Prime and paint
- Reading precision measuring devices
- Spin testing gearboxes
- Fabricate packing and gaskets
- High mechanical intelligence
- Attentive to details
27
Belt / Hose Shop Technician Resume Examples & Samples
- Install, splice and repair conveyor belts at the customers’ locations
- Use welding, schematic reading, tube bending, repair shop experience and field service experience to make accurate and timely repairs
- Machinist experience
- Experienced in Industrial Maintenance required
28
Cable Shop Technician Resume Examples & Samples
- Proficient in the use of multi-meters, hi-pot testers and other basic instruments
- Ability to stand during majority of shift, occasionally lift/carry up to 50 pounds and occasionally push/pull up to 10 pounds of force
- Ability to use hands and wrists repetitively while using hand tools
- Basic computer knowledge for documenting work activity
- Ability to read and interpret blueprints, wiring diagrams, assembly prints
29
Sign Shop Technician Resume Examples & Samples
- Weeding and taping cut vinyl graphics
- Applying cut vinyl and printed graphics to substrates common in the sign industry
- Installing cut vinyl and printed graphics on site and on vehicles
- Graphic removals from vehicles, glass, and other surfaces
- Tools regularly used in the industry
- Large format printers, vinyl plotter, and engraver and accompanying software
- Graphic design concepts applicable to the signage industry
- Various file types and the advantages and disadvantages of each
30
In Shop Technician, Central Power Resume Examples & Samples
- Perform all duties adhering to Cummins Safety Policies and Procedures
- Efficiently remove and install engines in equipment chassis
- Efficiently remove and install components on engines, in and out of chassis
- Accurately document the work performed
- Maintain adequate personal tooling
31
In Shop Technician Intern, Cummins Bridgeway Resume Examples & Samples
- 2) Learn and follow typical shop procedures and process
- 8) Proficient with the use of hand and electronic tools
- 10) Ability to follow instructions and listen to directions
32
Shop Technician Resume Examples & Samples
- Dismantle, repair and reassemble Mud bucket and Hole-Opener Equipment
- Pressure washing of used equipment. Responsible for the cleanliness, maintenance and proper disposal of debris on property
- Assist the Supervisor in all aspects of the job
- Assemble and set up new equipment
- Assist in loading and unloading equipment
- Ensure awareness of, and compliance with, relevant company/customer QHSE requirements
- Perform other duties as required by Supervisor
- Minimum of one to three years’ experience
- High school diploma or equivalent general education degree (GED) preferred
- Equivalent combination of experience and/or training
33
In Shop Technician Intern Resume Examples & Samples
- 5) Learn the utilization of electronic information tool for performing quality repairs
- 11) Perform simple mechanic and electrical task while under direct or indirect supervision
- 3) Have a minimum high school overall GPA of 2.8
- 5) Demonstrated attendance performance of 95% or higher
34
At our Site Rebuild Shop Technician Resume Examples & Samples
- Teardown, inspect and re-assemble rebuild components and test
- Disassemble, inspect and rebuild components according to SEU guidelines
- Correctly diagnosis failed components, when possible
- Participates in the rebuild of selected components according to SEU guidelines
- Assures that components are rebuilt to the latest recommended specifications as per the Liebherr SEU Share-point Site
- Successfully interfaces with customers when required
- Access the BaaN computer system to ensure parts can be identified and found
- Works closely with warehouse personnel to ensure all parts are correctly recorded
- Assists with troubleshooting field service calls as needed
- Develops an understanding of systems used on Liebherr Mining Equipment products
- Handles and properly disposes of hazardous wastes, such as oil, antifreeze, transmission fluid, auto parts cleaner and similar material
- Assures that tools, supplies, etc. are picked up every day at the end of the shift and the shop is kept clean and orderly
- Assists Lead Rebuild Service Technician and Manager as needed
- Step in as Lead Rebuild Service Technician as needed
- Train and mentor lower level Rebuild Service Technicians
- Promotes a safe work environment by ensuring the group and self, follow established safety procedures including MSHA & OSHA regulations
- Understands and complies with quality assurance requirements
35
Shop Technician Resume Examples & Samples
- Competent in the use of portable hand held tools (e.g. electric/pneumatic drills/screw drivers
- Able to communicate effectively with internal and external customers
- Ability to operate forklift
- Basic understanding of Mechanical systems and use of hand tools
- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job
- While performing the duties of this job, the employee will regularly to use hands, fingers, handle, or feel and talk or hear
- The employee is often required to stand, walk, bend reach and occasionally sit
- The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds
- Specific vision abilities required by this job include color vision
36
Shop Technician Resume Examples & Samples
- Performs mechanical repairs and service on the full line of products handled by VCES
- Possesses a set of tools sufficient to perform the job
- Operates a service truck in a safe and responsible manner
- Willingly accepts responsibility and is flexible to any assignment
- Willingly works over time when needed to complete an assigned task
- Minimum of seven (7) years’ experience working on construction related equipment
37
Concept Shop Technician Resume Examples & Samples
- Check conformity of component or Sub-assy from supplier or intercompany following drawing,
- Check control report from supplier
- Control by sample following quality inspection recommendations in place
- Register the results of control
- Manage no-conformity
- Update ERP in place
- Prepare kits of Assy following BOM through our PRP system and SAP
- Manage and highlight components missing in the kit preparation
- Enter components come from supplier or intercompany in warehouse
- Use SAP to manage movements of components
- Manage inventory and accuracy of stock
- Build Assy demand following specifications from requestor and quality process
- Write control report Assy
- Ensure the shipment , documentations and SAP process
- Use PRP base follow-up and SAP
- Follow the HSE rule in place
- Participate of continu improvement process in place
- B.S./M.S. engineering degree or equivalent
- Great experience of assy process and quality control (2 years), preferred on Turbocharger
- Knowledge of SAP, MS office
38
Engine Shop Technician Resume Examples & Samples
- Carry out diagnostics using diagnostic tools on different product types with minimal supervision
- Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete less complex repairs, including identifying and preparing required parts and tools
- Performs preventative maintenance activities as per documented schedules and standards on engine and related components
- In depth mechanical repair and maintenance capability to carry out external engine repairs including fuel system components
- Must be able to resolve common technical problems
39
Print Shop Technician Resume Examples & Samples
- Acts as primary customer services contact for Copy Center, explains policies and procedures and resolves issues related to Copy Center services
- Orders, inventories, and maintains supplies
- Cost recovery, allocation management, asset management
- Acts as Key Operator, identifying equipment problems, performing minor repairs to Xerox equipment or arranging for repair service; operates high volume equipment as needed
- Handling production print jobs (fulfillment and transactional), production color and oversize services, professional bindery and custom tabbing
- Minimal break-fix and troubleshooting
- Changing paper, toners and drums
- Handling mailroom responsibilities
- Experience in a copy center
- Experience with Xerox Equipment
40
Shop Technician Resume Examples & Samples
- 2 years verifiable Tractor/Trailer maintenance experience. (Other applicants with the proper vocational training will be considered.)
- Good previous work and work attendance record
- Must pass a pre-employment drug screen and post-offer company physical
- Be available to work ANY SHIFT ANY DAY
41
Work Shop Technician Resume Examples & Samples
- Carry out Site Receipt Testing (SRT), Factory Acceptance Testing (FAT) and Maintenance of Customer owned Subsea Control Modules (SCM’s) and associated Production Controls equipment in accordance with the appropriate procedures and drawings
- Provide a written report highlighting issues, with the relevant recommendation for repair
- Ensure that product quality is maintained, by adherence to Company Standards and Procedures, to achieve customer satisfaction
- Ability to interpret Technical drawings, Procedures and Engineering part specifications
- Assembly and Disassembly of products in accordance with the applicable drawings and engineering procedures
- Comply with all safety instructions, promote individual and team safety
- Promote and maintain quality standards
- Identify and report all safety concerns, Quality issues and manufacturing problems before progressing work
- Ensure all work is carried out in a safe manner, protecting the environment, health and safety by complying with written COSHH Assessments, Risk Assessments or by carrying out any necessary risk assessments and Job Safety Analyses prior to task commencement
- Carry out all necessary work as designated by the Workshop Supervisor or Shift Lead Hand
- Maintain a high level of 5s ensuring a safe working environment is upheld
- Time served Technician or significant Subsea Production Controls experience
- Production Controls Workshop based experience preferable
- Knowledge of Software updates and downloads
- Ability to write technical reports
- Ability to identify improvements within work area
42
Entry Level Shop Technician Resume Examples & Samples
- Valid Driver's license and satisfactory driving record required at all times
- Knowledgeable in the operation, maintenance and basic repair of aerial, earthmoving and general equipment
- Capable of lifting up to 40 pounds
- Safety conscious attitude toward all assigned tasks
- Able to assist with loading/unloading of equipment from trailers
- Ability to perform tasks independently without direct supervision
- Mechanical or equipment operation experience is a plus
- Willingness to help in other areas of the shop and yard where required
43
Shop Technician Resume Examples & Samples
- Maintain shop operations
- Maintain shop condition including general appearance, organizing, and repair and maintenance of equipment used to service or process rental product accessories
- Assists in verifying accurate inventory counts and location of rental product accessories
- Load, unload and move company equipment
- Services rental product accessories both received and in preparation for rental
- Follow established QA & HSE policies and procedures
- Other related duties as assigned by superiors
- Ability to comprehend the basic processing of company equipment
- Ability to adequately communicate with other employees
- Able to meet physical requirements as defined by the company
- Experience with related company equipment a plus but not required, training will be provided
44
Lead Shop Technician Resume Examples & Samples
- High school diploma/GED preferred. Minimum of 7 years of automotive service and repair; minimum of 1 year of customer service experience with prior supervisory experience preferred
- Must currently possess or be able to obtain Master Level ASE certifications within 18 months of employment
- Must be able to work on a variety of vehicles from Light-Duty to Class A Heavy Trucks, Mechanical Equipment, Machinery, Passenger Vehicles and more
- Must maintain a valid driver’s license and a safe driving record as well as pass a background check and pre-employment drug screening
45
Shop Technician Resume Examples & Samples
- Perform mechanical repairs and service on the full line of products represented by VCES
- Service and repair work for this position will only be performed in the shop
- Has good knowledge of all equipment systems, including but not limited to hydraulic, air, electrical and lubrication
- Ability to work on or around heavy construction equipment, which requires climbing and accessing hard to reach areas
- Must possess a set of tools sufficient to perform the job as required
- Consistent follow through on all job facets, including parts ordering and retrieval, customer follow-up, etc
- Possesses a valid drivers license and a clean driving record
- Prior experience in the construction industry preferred
- Background with hydraulics and diesel engines preferred
- Full understanding of OSHA and applicable safety regulations
- Knowledge of federal, state and local safety regulations pertaining to job sites and locations
46
Maintenance Shop Technician Sign On Bonus Resume Examples & Samples
- Maintains a basic knowledge of a vehicle's mechanical and electrical systems to perform basic preventive maintenance and some repair functions. Areas of equipment maintenance may include
- At least 1 year of experience in a maintenance role that includes supervised training on heavy transportation vehicles, aircrafts or ships by a certified technician or completion or a certified diesel maintenance program
- Automotive Service Excellence (ASE) Certification T8 PM is a plus but not required
47
Paint Shop Technician Resume Examples & Samples
- Ability to see color variances. (Not color blind)
- Able to read and follow Safety Data Sheets and mixing ratio instructions
- Ability to use/troubleshoot conventional paint guns and spray equipment
- Able to paint 8-12hrs a day as required
- Able to work from a ladder
- Able to lift up to 50lbs (3-5lbs consistently)
48
Lead Shop Technician Resume Examples & Samples
- Lead skilled mechanical duties involving troubleshooting, diagnosing and repairing natural gas engines, compressors, generators, turbines and/or other power driven equipment
- Ability to mentor laborers to inspect engines, compressors and mechanical equipment: diagnose problems and determine extent of necessary repairs; supervise and schedule repairs and routine preventative maintenance
- Ability to oversee projects and lead crews for overhaul, repairs and maintenance of engines, compressors, pumps, turbines and motors, and meet required production rate expectations
- Ability to provide oversight of maintenance and repair of ignition systems, carburetion equipment, fuel injection systems and emissions control systems
- Ability to perform lockout/tagout, starting/stopping of equipment, and perform equipment checks
- Ability to use of hand tools, power tools, and electronic diagnostic equipment
- Monitors and stimulates maximum efficiency and productivity to minimize problems and downtime
- Ensures that established regulatory environmental and safety standards are maintained. Leads activities and decisions relative to the safety of the job and the surrounding area
- Maintains good employee relations, takes proper disciplinary measures when required
- Assist in performance reviews for subordinates
- Schedules overtime, as required
- Cost control of jobs including labor and materials
- Excellent communicator, both written and oral and coordinate work directly with customers
- Performs other functions/duties as required
- Able to travel Internationally
- High school education (GED)
- Technical School
- Associate or bachelor’s degree preferred
- Minimum of 8 years industry experience required
- Cat 3300, 3400, 3500, 300, 3600 & CM 34 Engine Experience Preferred
- Waukesha
- Ariel
- Dresser
- Gemini
- Microsoft Office,
- Cat ET
- Waukesha ESM
- Skilled mechanic with abilities to troubleshoot, diagnosis and repair natural gas engines, compressors, generators, turbines and/or other power driven equipment
- Ability to lead a team of field subordinates and increase efficiency, and production quality and volume. Able to apply principles and techniques to accomplish goals
49
Shop Technician Resume Examples & Samples
- Mechanical knowledge helpful
- 6 months to 2.5 years Shop/Yard Maintenance or equivalent experience
- Valid Class A CDL with clean driving record
- Forklift certification, or able to obtain within 90 days of hire
- Salary competitive and commensurate with qualifications and experience
50
Shop Technician Resume Examples & Samples
- Perform Quality Control Inspections of Westinghouse mechanical and electrical items and services of low and moderate complexity
- Read engineering instructions and review inspection procedures, drawings and specifications to determine inspection requirements
- Skilled in use of precision measuring equipment including hand tools and surface plate inspections
- Identify and report defects in inspected or tested components, assemblies and systems, and provide recommendations for actions to meet quality assurance standards
- Confirm implementation of corrective action to resolve product defects
- Maintain calibration system for inspection, measuring and test equipment to ensure conformance with defined standards
- High School degree or equivalent required. Associate degree related to electrical, mechanical or machining or equivalent inspection experience preferred
- Understanding of quality control standards and their application, e.g. IPCA-610, IPC/WHMA-A -620
- Demonstrated skills to interpret electrical and mechanical drawings
- Minimum of 3-6 years working experience with demonstrated electrical, mechanical, machining or inspection skills required
- 6+ years prior nuclear industry experience is strongly preferred
- Strong written and verbal communication skills required
- Computer skills including office software such as Microsoft Office (Word, Excel, PowerPoint). SAP experience is preferred
51
Shop Technician Resume Examples & Samples
- High School degree or equivalent required
- Associate degree related to electrical, mechanical or machining or equivalent inspection experience preferred
- Understanding of quality control standards and their application, e.g. IPC-A-610, IPC/WHMA-A -620
- 0-4 years working experience with prior nuclear Industry experience preferred
- Ability to take direction and effectively perform tasks to complete the requests
52
Shop Technician Resume Examples & Samples
- Troubleshoot and service hydraulic systems
- Good understanding of fits and tolerances, using micrometers, calipers, and indicators
- Experienced in hydraulic troubleshooting, schematic reading, and tube bending
- Working knowledge of Excel and Word
53
Night Shop Technician Resume Examples & Samples
- Track inventory of parts, o-rings, teflons, and other related supplies
- Keep equipment in good working order through cleaning and calibration
- Loading and unloading equipment
54
Container Shop Technician Resume Examples & Samples
- Performs inspections, conduct diagnostic tests, preventative maintenance, and repairs on varied types of compactors, and other stationary equipment. Reads electrical schematics. Diagnoses and repairs electrical problems on equipment using both single and three phase AC voltage -- including working with high-voltage electricity. Reads hydraulic schematics. Diagnose and repair hydraulic issues on equipment. Maintains knowledge of proper installation of compactors, and other types of stationary equipment. Perform or assist with installations as scheduled and meets relevant deadlines. Performs welding and fabrication work as needed. Ensures and maintains efficiencies so that all scheduled jobs can be handled in a given day. Completes paperwork and/or enters data associated with repairing relevant equipment in an accurate and timely manner. Follows all safety policies and procedures. Performs other job-related duties as assigned or apparent. The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required by personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company
- High school diploma or G.E.D. Equipment maintenance and repair experience. Welding and/or fabrication skills and/or experience
- Basic computer skills as demonstrated by knowledge of and ability to use MS Excel and word processing applications. Knowledge of basic and advanced hand tools. During employment, a Technician will complete Company training and safety programs
55
At our Site Burlington, ON Shop Technician Resume Examples & Samples
- Ensure that all final verifications specified in the work instructions, scope of work, verbal communication and / or in specifications are completed and completed
- Maintain and take care of tools and company equipment
- Perform other tasks that are required and assigned to the position
56
Print Shop Technician Resume Examples & Samples
- Runs high volume copy machines and performs binding and finishing work
- Ensures convenience copiers are working properly, checking for quality via daily inspections. Clears paper jams and informs technicians of specific problems
- Performs all repair service on customer copier equipment
- Maintains records for management reports and inventories of supplies needed
- Distributes office supplies, fax transmissions and mail to company personnel and/or designated drop-off points as required
- Calculates charges for jobs performed and maintains some billing logs
- Responds to and coordinates all service calls required by customer
- May perform filing duties in conjunction with specific customer requests
- Delivers completed jobs to pre-determined customer locations within and outside of the site
- Maintains daily meter and service logs
- May travel between customer's buildings
- Answers customer questions regarding status or feasibility of job requests
- Ensures upkeep of convenience copier areas by keeping neat and well stocked
- Performs duties related to the shipping of materials
- Performs duties related to the receiving of materials
- May perform meeting room and conference room set ups
- May perform building occupant moves within assigned facilities
- May perform re-lamping and light maintenance duties as assigned
- May perform occasional cleaning duties as needed
- May require periodic overtime on nights and weekends, including off-hour emergency response
- Uses shrink-wrap machine, paper cutter, hole driller, bindery equipment, jogger, tape machine, stackers, electric stapler and scales in completion of various jobs contracted
- Uses all copier equipment, calculator, fax machine, postage meter and PC
- Performs filing duties, which may include 'purging' and archiving old documents
- MINIMUM 5 year experience related to copy job and/or print shop work
- May require valid driver's license and minimum levels of auto insurance coverage per Dahill
57
Shop Technician Resume Examples & Samples
- Associates Degree or certificate from a vocational or technical school preferred
- 1-3 year in a technical experience or equivalent
- Network experience or knowledge in computers and business related applications software
- Knowledge of industry related application software including Microsoft Office, Adobe to aid in resolving color as well as black and white print issues
- Ability to: lift and/or push/pull a minimum of 60lbs, and can stand for a minimum of 5 hours per day
- Ability to troubleshoot digital copiers and office equipment as required
- Must have strong ethics and the ability to work in an effective, efficient, and collaborative environment
- Must be able to use hands for fine manipulation of tools necessary to repair equipment
- Ability to travel to off-site for meetings, to visit customers and other business needs as necessary
58
Shop Technician Resume Examples & Samples
- How to handle, wash and clean parts correctly
- Prep and stage parts for assembly for both areas
- Prep parts for painting for both areas
- Finish work after painting for both areas
- Operate the gearbox test stand to include setup and teardown
- 1-3 months related experience and/or training
- Ability to read blueprints and use precision measuring equipment
- Proficiency with hand, electrical, and air operated shop tools
- Knowledge of shop practices, machines, and related equipment
- Machining or welding capability a plus
59
Shop Technician Resume Examples & Samples
- Mastered the basic skills needed to work on Voith Turbo couplings
- Basic disassembly, cleaning, rebuilding of drain type couplings of the Mining & Minerals group
- Basic disassembly, cleaning, and rebuilding of Safesets and Universal Drive shafts
- Painting of product
- Print reading of assembly drawings
- All skills needed to perform a complete rebuild of drain type couplings (excluding machining and balancing)
- Common wiring practices to support the electrical controls on drain type couplings
- Ability to fit and assemble hose, plumbing and tubing necessary on drain type couplings for Mining & Minerals and POG equipment
- Operation of the test stands for drain type couplings and Safesets
- Overhaul and rebuild practices of all drain type couplings
- Overhaul and rebuild practices of universal joint and cardan shafts
- Overhaul and rebuild practices of safesets
- Overhaul and rebuild practices of valvex products
- Has 6 months to 1 year of experience in Heavy Industrial Assembly at Voith
60
Shop Technician Resume Examples & Samples
- Clean and Maintain supplied air equipment
- Learns to inspect, test, and maintain safety equipment per manufacturer’s requirements and document service according to TSUS/customer policies and procedures
- Assists others in facility including stocking shelves with clean, tested and ready to use equipment and pulling, staging and loading customer orders onto trucks for delivery
- Refill high pressure breathing air cylinders
- Teamwork whenever required with all functions of the operation
- Backing up any employees that are out for whatever reason (sick/vacation etc…)
- Maintains work area and other areas in a clean and orderly condition. Performs additional duties after training
- Learns to issue, receive, track and inspect equipment using TSUS/customer provided software
- Interacting with the customer(s) in a professional manner consistent with TSUS expectations
- Transport equipment to and from the field
- On call in case of emergencies
- Instrumentation
- Industrial work preferably in a Petrochemical setting
61
Furniture Shop Technician Resume Examples & Samples
- Repair case goods
- Repair upholstery products
- Maintain a safe and organized work environment
- Fill disposition paper work for completed product
- Experience on furniture repair would be an asset
- Good communication skills and legible penmanship are required
- Grade 12
62
Apprentice Shop Technician Resume Examples & Samples
- Promotes an atmosphere of good will and accountability between the company and the customer. Always act in a professional manner and provide a superior level of service and customer satisfaction. Building trust with the customer through your honesty and integrity
- Expertly analyze and diagnose customer equipment problems. Recommend the correct service and repair to resolve equipment performance problems
- Make appropriate equipment repairs or modifications to solve operating and performance problems as dictated by the analysis. Test equipment once the repair is complete to insure unit is now operating properly and safely
- Follow all planned maintenance policies and procedures as directed by the company
- Accurately and neatly document on the work order the work performed, hour meter readings, serial numbers, model numbers and all information asked for. When work is complete and quality inspection is performed make sure you communicate with personnel (Shop foreman/Service coordinator/etc.) who arrange delivery back to the customer
- When performing warranty work, make sure the parts and workorder procedure for returning them to the proper person in the service department. To insure proper warranty filing can be done at the store location
- Observes all safety procedures, makes certain that hazardous waste is properly disposed
- Cooperatively performs additional duties when assigned by service management
- Keeps an updated tool list as required by company policy
- Operates all company tools properly and safely, make sure other associates who may be near your work area are in a safe position when performing your job functions
- Effectively communicates with customers, co-workers and management
- Have strong mechanical, IC, Hydraulic and electrical aptitude
- Secondary school graduate with one to three years of mechanical, electrical and hydraulic experience. May include equivalent college or vocational school education. Has strong mechanical and electrical aptitude
- Has the ability to understand the necessary service and training manuals, including the ability to interpret schematics and effectively use electrical diagnostic instruments
- Keep pace with industry innovations in order to make sound recommendations to customers
- Can safely operate power tools, lifts, hoists, hydraulic jacks and overhead cranes
- Has the ability to perform strenuous and heavy work, can exert force up to 100 pounds on occasion and frequently handle loads to 50 pounds. Must have the physical stamina to perform continuously with full body motion for climbing, reaching, pushing, lifting and reaching, etc
63
At our Site Shop Technician Resume Examples & Samples
- The Shop Technician performs mechanical maintenance and assembly adjustments in the shop on heavy equipment such as crawler and wheel excavators, dozers, loaders, material handlers and other construction equipment for customers
- Work on customer machines in the repair shop, and assist in the field as necessary
- Maintains punctuality and a professional demeanor by respectful communication with all levels of staff, keeping work areas clean and orderly, and promoting safety regulations and all other company programs
- Operates and maintains electric and/or air powered hand tools
- Assists in testing and commissioning of products
- Meets quality standards with no supervision, and minimum required rework
- Operates forklifts and overhead cranes as required
- Maintains quality standards through visual and mechanical inspection methods
- Works safely by following established safety procedures
- Troubleshoots using hydraulic and/or electrical schematics
- Completes repair tickets showing work completed and any follow-up required
- Performs pre-start checks and ensures product is ready for start-up
64
Shop Technician Resume Examples & Samples
- Reports to the Shop Supervisor or assigned Lead Technician of the organization
- Comprehension of Imperial and Metric tolerances
- Disassembly, cleaning, and inspection of gear drives per Repair Procedure Document Guidelines (see FM 10XYZ for specific details)
- Perform visual inspection
- Record abnormal wear
- Measure and record respective bores and journals; and
- Arrange and identify components (gearing) that passed visual inspection to receive further processing such as nondestructive testing and grinding
- Recycle unusable items such as bearings, damaged gearing, and auxiliary items
- Assembly and inspection of gear drives per Repair Procedure Document Guidelines (see FM 10XYZ for specific details)
- Disassembly, cleaning, and inspection of main shafts per Main Shaft Repair Procedure Document Guidelines (see FM 10MSZ for specific details)
- Assembly and inspection of main shafts per Main Shaft Repair Procedure Document Guidelines (see FM 10MSZ for specific details)
- Adherence to production schedule and completion of tasks in a timely manner
- Maintain and clean equipment, tools (shared and individual) and work stations
- Attending scheduled meetings such as daily production and weekly safety, when requested
- The candidate should have a strong mechanical background
- Gearing related experience is a plus. Must have a positive attitude and excellent communication skills (oral and written). Must understand how to read metric drawings and tolerances
- Proficiency with Microsoft® Office and other internal programs
- Fluent in Mandarin or Spanish is a plus
65
Shop Technician Resume Examples & Samples
- General Housekeeping
- Supporting internal customers unconditionally
- Department backup
- Encourages and builds effective relationships by communicating positively with all COTG employees
- Conducts and represents oneself as the public image of the company in accordance with COTG policies
- Maintains positive and professional phone etiquette during conversations with customers and internal employees
- Detailed follow up and proactively seeking resolution to any pending equipment challenges
- Ability to work under pressure and meet deadlines
- Must have excellent interpersonal and communication skills, and be able to deal with differing personalities
- Strong initiative and willingness to seek out information
- Organizational Skills and ability to handle multiple tasks in a sometime demanding environment is critical
- Must be able to work evening and/or weekend hours during peak periods
- Possess keen attention to detail
- Accountable for providing a full range of maintenance on devices; including technical diagnostics, network communication diagnostics, break/fix, assist in installation (set up, customer training)
- Responsible for assigned company assets (i.e. parts, tools, communication and computing devices)
- Lifting up to 50lbs required, and ability to follow instructions
- Maintaining assigned inventory, and the timely completion of paperwork
- Utilize information Technology skill set in order to communicate and interact with training department, employee's, and supervisors
- Willing to work overtime
- Maintains company training requirements
- Proficient with MS Office Suites (Excel, Word)
- Associate's degree highly recommended but not required
- Previous technical and mechanical experience preferred but not required
- Excellent organizational and management skills
- Electronics experience
- Valid driver's license and minimum levels of auto insurance coverage
- A+ certification is a plus
- English (reading, writing, and verbal)
- Basic business math
