Test & Evaluation Engineer Resume Samples
4.5
(134 votes) for
Test & Evaluation Engineer Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the test & evaluation engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
VA
V Armstrong
Vincenza
Armstrong
588 Kelsie Throughway
Boston
MA
+1 (555) 769 2654
588 Kelsie Throughway
Boston
MA
Phone
p
+1 (555) 769 2654
Experience
Experience
San Francisco, CA
Test & Evaluation Engineer
San Francisco, CA
McKenzie-Wunsch
San Francisco, CA
Test & Evaluation Engineer
- Develop and provide test plans for customer issues and small projects
- Document tests conducted, results, problems encountered and the solutions developed
- May perform other duties as assigned
- Work through ATEC to establish an integrated development test (DT)/operational test (OT) T&E strategy and evaluation framework
- Frequent travel to test sites, industry sites, and customer locations for on-site technical support work and Navy range operations
- The candidate will provide T&E and program management support to PEO IWS 1TE
- Provides support in the development, implementation and maintenance of test processes and diagnostic programs
Houston, TX
Enterprise Test & Evaluation Engineer
Houston, TX
Weber, Schmeler and Johnson
Houston, TX
Enterprise Test & Evaluation Engineer
- Familiar with test-program concerns including test-data management, trouble reporting and resolution, test design, and test development
- Implementing test-process improvements resulting from lessons learned and benefits surveys
- Support for customer interface, recruiting, test-tool introduction, test planning, staff supervision, and cost and progress status reporting
- Staying current on latest test approaches and tools
- Ensuring that test-product documentation is complete
- Writes test and evaluation documentation e.g., Test & Evaluation (T&E) Strategy, Test & Evaluation Master Plan, Event Test Plans, Test Readiness Assessments, and T&E Reports. Works with other test organizations to support T&E program integration
- Technical leadership for the test program, including test approach
present
San Francisco, CA
Senior Test & Evaluation Engineer
San Francisco, CA
Hane, Aufderhar and Wisozk
present
San Francisco, CA
Senior Test & Evaluation Engineer
present
- Review, modify, and develop configuration control, engineering, and support documentation for T&E, interface control, system design, system performance specifications, computer program changes, test plans, procedures, scenarios, reports, schedules, results, systems engineering test packages and presentations. Test events include ET, DT, SIT, CSSQT and FOT&E. Maintenance includes engineering configuration management
- Applies lessons learned to the improvement of test procedures
- Support and execute technical evaluation, engineering testing, and console operations
- Develops data processing tools and algorithms. Generates calibration procedures and software
- This person will perform on a diversified fast-paced engineering and science group (including PhDs)
- Leads the development of test procedures
- Prepare, update, and maintain documentation for T&E, ET, DT, SIT, CSSQT, FOT&E, and post event studies
Education
Education
Bachelor’s Degree in Engineering
Bachelor’s Degree in Engineering
University of North Texas
Bachelor’s Degree in Engineering
Skills
Skills
- Working knowledge of flight testing and one to three years of experience
- MS Access experience using (VBA) Visual Basic for applications programming
- Experience writing, debugging and maintaining test software in C++, LabView or Visual Basic
- Awareness of AS9100 or ISO9001 quality management system and ISO 17025 standard
- Working knowledge of E-mail, file sharing, teleconferences, and virtual meetings as used for coordination and test planning
- Experience mentoring early career engineers
- Experience with foreign customers,
- Experience working with Advanced Design or Phantom Works teams
- Experience with DOD (Department of Defense) remote sites
- Experience in creating task descriptions; problem solving; integration of aircraft equipment/mission system configuration changes; multi-functional communication; and working in a team environment with a foreman, flight mechanics, or electricians
15 Test & Evaluation Engineer resume templates
Read our complete resume writing guides
1
Test & Evaluation Engineer Resume Examples & Samples
- Joint and Multinational command structure; JIEDDO continuous evaluation, DoD acquisition processes and standards, JIEDD Capabilities Acquisition and Management Process (JCAAMP), JIEDDO Initiative Evaluation Process (JIEP), Electronic Attack, test planning and coordination and data analysis, program management and strong communications skills
- Proficient in the use of personal computers with experience using Microsoft Office Suite and web based applications is required
- Specialized Experience: At least two (2) years’ experience coordinating test & evaluation of developmental and demonstration programs in a DoD organization with rapid acquisition authority in direct support of combatant commands; alternative equivalent specialized field testing experience may be considered for exceptionally qualified individuals
- Experience must include coordinating test & evaluation within the JIEDD Capabilities Acquisition and Management Process (JCAAMP) and the JIEDDO Initiative Evaluation Process (JIEP)
- Demonstrated experience of Joint IED Defeat Organization processes, procedures and mission; JIEDDO continuous evaluation and DoD rapid acquisition Test & Evaluation procedures, processes, standards and report generation
2
Senior Test & Evaluation Engineer Resume Examples & Samples
- Leads the development of test procedures
- Applies lessons learned to the improvement of test procedures
- Designs calibration system/test fixtures
- Develops data processing tools and algorithms. Generates calibration procedures and software
- Guides others in the design of test hardware, software and systems to achieve test requirements. Oversees debriefing of the test team. Leads the analysis, processing and formatting of data to customer requirements
- Approves test data prior to delivery to customer. Formulates expectations for test data based on historical data. Performs functions as required to ensure calibration system readiness and data validity. Trains others. Works under minimal direction
- The desired candidate has a strong background in fast paced testing of Optical systems and thrives in an R&D environment
- The candidate will be familiar with a variety of optical testing techniques and will be able to keep customer needs in mind while building and testing optical prototypes in a laboratory environment
- The candidate should be comfortable working in an ambiguous environment with little to no requirements levied by customers
- The successful candidate will be able to take a ground up as well as top down approach to define required configurations, tests to be performed, analyze results, and communicate outcomes and recommendations to the rest of the team
- The candidate shall work closely with a multi-disciplined team including R&D electrophysics engineers, systems engineers, mechanical and electrical engineers to help derive requirements to meet customer needs
- This person will perform on a diversified fast-paced engineering and science group (including PhDs)
3
Test & Evaluation Engineer Resume Examples & Samples
- Develop and provide test plans for customer issues and small projects
- Design and acquire required test equipment/fixtures from suppliers
- Conduct product evaluation tests including flow, temperature and cycle tests
- Document tests conducted, results, problems encountered and the solutions developed
- Perform inspection per geometric dimensioning and tolerancing requirements needed
- Utilize monitoring and measuring equipment to perform inspection and test functions
- Participate in global cross-functional teams, including marketing, designers, manufacturing, sales and procurement
- Mechanical, Mechanical Engineering Technology, Aerospace or Agricultural Engineering are preferred majors
- 0-2 years of related experience preferred
- Intern or Co-op experience in a mechanical engineering position is a plus
4
Senior Test & Evaluation Engineer Resume Examples & Samples
- Monitor and review the developmental test and evaluation activities of major DOD space and missile defense acquisition programs
- Perform independent assessments of these system's in the areas of T&E planning, performance, interoperability, reliability, and cybersercurity to inform key program decisions and major milestones
- Translate system and developmental level requirements into appropriate risk and performance metrics and assess the feasibility and robustness of planned DT&E activities to capture them
- Participate in defining and designing operational environments to accurately test space and missile defense systems and systems of systems
- Explore new distributed test and evaluation techniques that apply to emerging space and missile defense capabilities
- Perform out-reach to the major space program offices on the west coast to facilitate DT&E planning and insertion of DT&E activities earlier in the acquisition process
- 3+ years of experience with software systems, cybersecurity, interoperability, and software testing required
- In-depth understanding of the DOD test and evaluation domain
- Recent experience with operational and/or developmental testing and evaluation, specifically of space acquisition programs or major missile defense systems acquisitions
- Understanding of and experience with test planning, design of experiments (DOE), and reliability growth
- Ability to work in team and individual environments; detailed oriented; strong written and verbal communication skills; effective technical presentation skills
- Proven ability to engage effectively with senior government executives, program managers and contractors
- Candidate must possess an active DoD secret clearance and have the ability to obtain a TS/SCI clearance
- Familiarity with the current T&E assets and/or the ability to reach across MITRE to obtain this information
5
Operational Test / Evaluation Engineer Resume Examples & Samples
- SEVP systems will need agile support for operational test and evaluation of new system developments and configuration changes until FOC
- Participate in the Operational Test Agent approval process as required by the Contracting Officer’s Representative (COR)
- Prepare for, take minutes and participate in Test & Evaluation (T&E), Working Integrated Product Team (WIPT) meetings, as well as T&E WIPT briefings and Test Events to SEVP, PMO and Director of Operational Test and Evaluation (DOT&E) as required
- Review/comment on MD 102 Documents, such as: Vision Document(s), Acquisition Plan (AP), Mission Needs Statement (MNS), Concept of Operations (CONOPs), Analysis of Alternatives (AOA), Operational Requirements
- Document (ORD), Integrated Logistics Support Plan (ILSP), Test and Evaluation Master Plan (TEMP), and Acquisition Program Baseline (APB), as well as other applicable program documents as required
- Update/Develop a Requirements Traceability Matrix; provide comment(s) as to whether or not requirements are testable and measurable when applicable suggest modifications to requirements in order to make them testable and measureable, and suggest additional requirements to SEVP, PMO and DOT&E
- Review and comment on Key Performance Parameters (KPPs) as to whether KPPs are operational, or performance based, testable and measureable
- Review and comment on Reliability, Maintainability and Availability (RMA), parameters/specifications as to whether they are appropriate for the system being procured across the acquisition cycle, as well as whether they are testable and measureable
- Develop/comment on the overarching Critical Operational Issues (COIs) develop Measures of Effectiveness (MOEs), Measures of Performance (MOPs), and Measures of Sustainability (MOSs) for the program
- Develop and provide briefings to SEVP, DOT&E, SEVIS II IPT and others recommending an Operational Test Strategy, i.e. what Operational Events should be conducted during each acquisition phase, why those events are necessary to reduce risk (cost, schedule, or performance) to the Program
- Operational Events include: Early Operational Assessment (EOA), Developmental Test (DT) Assist, Operational Assessment, Initial Operational Test and Evaluation (IOT&E), Follow on OT&E (FOT&E), as well as conducting a Risk Assessment for each follow on Build in order to determine the appropriate level of Operational Assessment (OA/OT&E) required prior to incorporation of that Build into the production environment
- Participate in Mission Based Test Design in order to develop operational test scenarios and user stories to provide a means of evaluating MOEs, MOSs, and MOPs, leading to assessment of COIs, and ultimately provide quantitative/qualitative evidence that system is either suitable and effective, or not
- Develop modifications to the TEMP that address the approved Operational Test Strategy,COIs, MOEs, MOSs, and MOPs, as well as recourses required to plan, perform, analyze, and report on Operational Events during all phases of acquisition
6
Senior Test & Evaluation Engineer Resume Examples & Samples
- 10 Years of experience with conducting test in a lab or production environment
- 10 Years of experience with performing design, integration and/or testing on avionics sub-systems
- 5 Years of experience as a technical lead
7
Test & Evaluation Engineer, Senior Resume Examples & Samples
- 5+ years of experience with acquisition
- 5+ years of experience with test and evaluation
- 5+ years of experience with OSD, Service Staff, or Joint Staff
- 5+ years of experience in DoD weapons systems
- 2+ years of experience with weapon systems PM leadership
- 2+ years of experience with the DoD budget process
- Experience in working with senior DoD staff from several organizations, including AT&L, DoD CIO, Joint Staff, CAPE, Services, STRATCOM, and COCOMs
- Ability to work independently and with high energy
- Experience with security system engineering and software development
- Experience with industrial control systems
- MA or MS degree
8
Test & Evaluation Engineer, Mid Resume Examples & Samples
- 3+ years of experience with system test and evaluation
- 3+ years of experience with analyzing and documenting test results
- Experience with Microsoft Office, including Word, Excel, PowerPoint, and Outlook
- Ability to interface with internal and external customers
- Experience with project management experience and leadership
- Experience with supporting a government system program office in the acquisition of large space systems within the DoD or government
- Possession of excellent interpersonal skills
9
Test & Evaluation Engineer Resume Examples & Samples
- Developing a T&E strategy, to include purpose, scope, and objectives, that will support the Program Acquisition Strategy
- Providing a forum for reviewing, discussing and integrating into the test strategy the Critical Operational Issues and Criteria (COIC) identified by ARCIC
- Work through ATEC to establish an integrated development test (DT)/operational test (OT) T&E strategy and evaluation framework
- Working closely with the SE IPT to better understand Program requirements and evolving integration and design
- Preparing, updating and maintaining the Program Test and Evaluation Master Plan (TEMP) to guide future testing and support Milestone Decisions
- Identifying and resolving issues essential to executing a successful T&E Program
- Providing T&E guidance to all IPTs
- Managing Program T&E risk
- Evaluating the results of the Program Integrated DT/OT and related testing in preparation for the Operational Test Readiness Review
- Communicating T&E progress and status to appropriate levels of chain of command
10
Test & Evaluation Engineer Resume Examples & Samples
- As the Test & Evaluation Engineer, you will participate in gathering and analyzing requirements for test measurement systems
- You will assist in the development of test procedures, and instrumentation and configuration definition to perform the test within the constraints of the test plan
- You will develop solutions to calibration systems problems as well as perform data analysis, develop and utilize data processing tools
- The Test & Evaluation Engineer will design simple component level hardware or software, use analytical tools to verify the design and verify collection of complete data set
- You will also maintain test logs, prepare simple test reports and archive data
- Able to obtain a DoD Secret clearance post hire
11
Test & Evaluation Engineer Resume Examples & Samples
- 3 or more years of experience writing Mil-Std compliant test plans, procedures and reports
- 3 or more years of experience designing and maintaining automated and semi-automated test equipment
- Strong communication skills and the ability to interface with diverse teams
- Strong collaboration skills in order to contribute effectively
- Experience with engineering decision making, planning and organizing, and some Project Management experience
- Experience and expertise in Engineering Test Techniques, Project Leadership and Test Configuration Control
- Experience with testing and troubleshooting RF devices
- Experience with RF equipment including PNA, VNA, Spectrum Analyzers, power meters, signal generators
- Experience working on integrated test teams
- Negotiation and Managing Conflict skills
- Experience writing, debugging and maintaining test software in C++, LabView or Visual Basic
- Experience generating circuit schematics and design circuit cards for test equipment purposes
- Experience with Mil-Std 810 environmental qualification testing
- Experience writing DITMCO or Cirris cable testing applications
12
Test & Evaluation Engineer Resume Examples & Samples
- Test program planning
- Detailed test planning
- Instrumentation installation coordination
- Test article configuration management
- On-aircraft ground testing
- Support systems check out
- Test readiness reviews
- Flight testing
- Weight & balance forms
- Day-to-day coordination of remote site test activities
- Issues resolution within a flight test program
- Working knowledge of flight testing and one to three years of experience
- The successful candidate will need to have excellent leadership, team building, analytical, communication, interpersonal, and organizational skills with a commitment to customer satisfaction
- They must be comfortable at coordinating with people from various technical disciplines in St. Louis and remote sites
- Experience in aircraft instrumentation systems, on-aircraft ground tests, and flight test operations
- Working knowledge of E-mail, file sharing, teleconferences, and virtual meetings as used for coordination and test planning
- A working understanding of Boeing Military Flight Test Processes
- Experience with foreign customers,
- Experience working with Advanced Design or Phantom Works teams
- Experience with DOD (Department of Defense) remote sites
- Experience in creating task descriptions; problem solving; integration of aircraft equipment/mission system configuration changes; multi-functional communication; and working in a team environment with a foreman, flight mechanics, or electricians
13
Senior Test & Evaluation Engineer Resume Examples & Samples
- Space (Military Satellite Communicaitons Program)
- T&E (Satellite Communications Program Type)
- System Engineer Experience - Systems Engineer (System Engineering) - Practitioner
- System Design - System Integration & Verification (System Engineering) - Expert Practitioner, Senior Practitioner
- System Engineer Management - Planning, Monitoring & Controlling (System Engineering) - Senior Practitioner
- 20+ years demonstrated experience in multi-faceted tests and test project teams, to include oversight of scheduling
- 20+ years test and evaluation experience with DoD/USAF test processes and documentation
- 3+ years of experience with MILSATCOM systems
- Capable in Microsoft Office products (Word, Excel, Powerpoint)
- Experience with Space and Missles Space Center (SMC)
- Experience with Test & Evaluation Master Plan (TEMP)
14
IES Test & Evaluation Engineer Resume Examples & Samples
- Interact with site personnel to coordinate test lab architecture and configurations
- Author test plans and procedures (test cases)
- Complete Software Trouble Reports
- Identify and document system engineering requirements from customer requirements documentation, goals and objectives
- Maintain working knowledge of changes to data link Military Standards
- The candidate should be a self- starter and be able to operate with minimal supervision
- The candidate must be flexible and work well with other team members
- Excellent verbal and written communication skills are required as well as attention to detail
15
CBP Otia Senior Operational Test & Evaluation Engineer Resume Examples & Samples
- Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal
- Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications
- Bachelor's degree in Engineering, Sciences, or related fields
- Basic communication skills to communicate with customers, support personnel and management
- Basic creative thinking, problem solving, planning, time-management and organization skills to balance and prioritize work
- Ability to create and maintain formal and informal networks
16
Test & Evaluation Engineer Resume Examples & Samples
- General ability to conduct a test, compilation of test sequence, monitor progress of the test, and record test activities while being able to accommodate any unforeseen events that occur during the test
- General knowledge and understanding of AFNWC 99-103 test processes and test approaches
- General knowledge and is proficient in the operation, integration, installation, troubleshooting, and maintenance of automatic test equipment (and associated software, Test Program Sets (TPS), and programming codes
- General knowledge across a wide range of radiation effects and electronic, electrical, software engineering disciplines (e.g. analog and digital circuit design, electromagnetic Interference (EMI) and electromagnetic compatibility (EMC) electrical design, embedded software and microprocessor based system designs
- General knowledge of test article/vehicle configuration control procedure required to prepare for a given test. This requires the use of configuration control management process to track and maintain article/vehicle configuration. General ability to configure the test article using test requirements gathered from test plans, government regulations, and safety rules
- General knowledge of design of experimental models, mechanisms, prototypes, test rigs and fixtures, test equipment, and load measurement devices. Includes mechanical, hydraulic and pneumatics systems design
- Knowledge of machine shop tools and processes
- Ability to integrate wide range of test instrumentation (e.g., strain, pressure, and temperature). Utilizes analytical tools
- Bachelor's degree or higher education is required
- ICBM Experience preferred, not required
- Degree in Electrical Engineering is preferred
- Experience in analysis & experimentation or test & evaluation
- Experience with test requirements and automated test systems
17
Test & Evaluation Engineer Resume Examples & Samples
- Develops solutions to calibration systems problems of limited scope and impact. Designs test hardware, software and systems to achieve test requirements
- Uses analytical tools to verify the design. Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer
- Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally
- Debriefs test team to evaluate test performance and obtains authorization to break/alter configuration. Prepares special test procedures to support failure investigation. Develops the plan for the next test activities or events based on results. Authorizes reallocation, disposition or refurbishment of test articles and assets
- Coordinates the manufacture and assembly of the test hardware and validates conformance to design specifications
- Supports the development and verification of test methods
- Requires a Bachelor Degree or higher level of education
- Must have engineering experience working in a lab environment
- Labview experience preferred
- Preference for Mechanical Test and Evaluation Engineer
- Understanding of Shock and Vibration testing principles
- Experience with lab test equipment including scopes, meters, power supplies and fiber optics
- Goal-oriented and have a developed work ethic
- The knowledge needed to multi-task and work in a team environment is essential
18
Test & Evaluation Engineer Resume Examples & Samples
- Experience with open and closed loop feedback control systems (e.g., sequencing, ladder logic, PLC, PID), including custom software (e.g., LabView, Linux, C/C++, Visual Basic), control system theory, test fail-safe techniques, system optimization techniques, and compensation techniques)
- Experience in any of the following instrumentation (Strain Gages, Deflection Transducers, Accelerometers, Temperature/Pressure Measurement)
- More than 5 years of experience directly interfacing with customers and senior program leadership
- Experience with test article/vehicle configuration control processes
- Experience with test facility design and operation
19
CBP OA Junior Test & Evaluation Engineer Resume Examples & Samples
- Assist with test scenario preparations for demonstrating operational usage for surveillance technologies
- Analyze results of testing using statistical methods
- Review functional requirements to ensure they are objective and verifiable
- Bachelor's degree in Engineering, Sciences, Math, or related field and 2+ Years of experience of test planning, execution, and reporting, or equivalent combination of education and experience
- Experience in the full breadth of acquisition, particularly programing, planning, acquisition, requirements or test
20
Test & Evaluation Engineer Resume Examples & Samples
- Supports development of test debrief material. Participates in evaluation of test performance data. Collects the data and provides recommendation to break/alter configuration. Performs special test procedures as required to support failure investigation. Prepares for next test activities or events based on results. Conducts reallocation, disposition or refurbishment of test articles and assets
- Designs component and sub-assembly level hardware or software as specified by the Statement of Work. Uses analytical tools to verify the design. Assists in coordinating the manufacture and assembly of test hardware
- Assists in demonstrating the effectiveness of test methods
- Generates simple test plans or aspects of more complex plans. Interfaces with internal contacts, decomposes information from requirements and Statements of Work to formulate basic test approaches. Reviews standards and regulations to assess the impact on the test plan
- Develops simple test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan
- Reviews test data for accuracy, quality and/or fidelity prior to delivery to customer. Alerts senior engineers of off-nominal data
- Gathers information from applicable sources to define test requirements, facilities and test articles for simple tests. Assists in identifying test requirements for complex tests
- Performs test and collects data, following established test procedures. Identifies anomalies and suggests solutions to more experienced personnel. Makes suggestions on emerging conditions
- Prepares test configuration work instructions and detailed change orders. Coordinates the staging of test hardware. Participates in test readiness reviews, safety reviews and data/control systems checkout to minimize risk. Performs calibrations and system check-out/validation to satisfy test requirements. Configures software for data acquisition and analysis. Prepares daily execution plans for effective use of all test resources
- Prepares test reports for review by more experienced personnel. Provides input to lessons learned and performance metrics to improve future testing. Archives data and reports as required
- Bachelor Degree or higher education
21
Test & Evaluation Engineer Resume Examples & Samples
- Designs test hardware, software and systems to achieve test requirements. Uses analytical tools to verify the design. Specifies requirements for hardware, software, models, instruments and support equipment as required to meet test objectives. Coordinates the manufacture and assembly of the test hardware and validates conformance to design specifications
- Develops complex test plans to identify test approach, resources (e.g., people, capital, facilities), schedules and cost estimates that meet applicable requirements, standards and regulations
- Develops detailed test procedures, and instrumentation and configuration definition, needed to perform the test and minimize risk within the constraints of the test plan
- Analyzes, processes, and formats data to customer requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer
- Gathers information from sources such as specifications, technology experts, contracts, test plans and system engineering to define complex test requirements, facilities and test articles in accordance with applicable program statement of work and regulatory requirements as a basis for test planning
- Performs test in accordance with approved test plan/procedure and applicable policies. Troubleshoots and addresses anomalies. Makes decisions based on emergent conditions. Collects data for processing as required
- Defines and oversees test article configuration by providing work instructions and detailed change information. Coordinates the integration of test specific hardware and validates conformance to test specifications. Conducts test readiness reviews, safety reviews and data/control systems checkout to minimize risks. Performs calibrations and system check-out/validation to satisfy test requirements. Develops and validates software for data acquisition and analysis. Prepares complex daily execution plans for effective use of all test resources
- Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Documents and reports lessons learned and performance metrics to improve future testing and makes recommendations to improve processes. Archives data and reports as required
- Minimum of 1 year of experience with testing hardware, software and systems to achieve test requirements
22
Test & Evaluation Engineer Resume Examples & Samples
- Develops the standard policies for post test activity. Verifies accuracy of results with other competent authorities. Resolves or oversees resolution of special test procedures
- Oversees the integration of new design and manufacturing techniques into test hardware/system designs. Analyzes processes for potential improvements and recommends associated changes
- Leads others in the development of standard test methods and processes. Applies advanced test technologies to create or improve test methods. Writes invention disclosures to protect Boeing Intellectual Property. Prepares R&D proposals and presents to internal management and external customer
- Develops highly complex test plans. Applies innovative and advanced technical approaches to test planning. Reviews and approves scheduling and cost estimates for major test efforts
- Applies emerging industry technologies to develop test procedures. Communicates latest techniques from industry for procedure formulation. Reviews critical procedures to identify potential problems and resolve issues
- Works with the enterprise test and engineering group to standardize evaluation techniques. Formulates expectations for test data for new or unique tests
- Negotiates with the customer in defining test requirements and addresses issues regarding scope, cost and schedule
- Resolves complex technical problems that critically affect performance, cost or schedule. Reviews work in progress to ensure that specifications, design, criteria and performance schedules are maintained. Performs final review of data for accuracy
- Coordinates with internal and external customers on high value test article configuration. Works with regulatory agencies to resolve compliance issues. Determines test readiness, safety and system checkout requirements necessary to minimize risk
- Provides guidance on the technical content of test reports in the case of test anomalies and issues. Presents test results to high level internal and external customers
- Minimum of 3 years experience with testing hardware, software and systems to achieve test requirements
- Experience as a lead engineer
- Experience in administering processes and tools for managing Intellectual Property (IP)
- Experience as a Test Conductor, Test Director and Lead Verification Engineer
23
Test & Evaluation Engineer Resume Examples & Samples
- Oversees debriefing of the test team. Evaluates test performance data and authorizes to break/alter configuration. Provides guidance in the preparation of special test procedures to support failure investigation. Authorizes the plans and schedules for the next test activities or events based on results
- Guides others in the design of test hardware, software and systems to achieve test requirements. Identifies required skills and tools and integrates them into the test team. Reviews and approves design and analysis to insure compliance with test requirements
- Develops and documents standardized test methods and processes to ensure repeatability and productivity
- Integrates system test plan into a master plan by defining test Statements of Work (SOW) for all test programs in response to customer requirements. Oversees development of test plans and verifies approach and resource availability. Prepares complex schedules and cost estimates
- Minimum of 3 years of experience with testing hardware, software and systems to achieve test requirements
- Experience in leading technical teams
24
Test & Evaluation Engineer Resume Examples & Samples
- Leads the development of test procedures. Applies lessons learned to the improvement of test procedures
- Leads the analysis, processing and formatting of data to customer requirements. Approves test data prior to delivery to customer. Formulates expectations for test data based on historical data
- Provides oversight for requirements gathering and tracks scope of requirements across complex programs. Assures accuracy and completeness of test requirements
- Directs others in performing tests in accordance with approved test plan/procedure and applicable policies. Initiates trouble shooting and addresses anomalies. Provides concurrence on decisions relevant to emergent conditions. Organizes collected data for review
- Leads others in the definition and oversight of test article configuration and demonstration of conformance to test specifications, established standards and regulatory requirements. Coordinates approval of test readiness reviews, safety reviews and data/control systems checkout to minimize risks. Communicates the status of test preparation activities to management and customers. Assigns and approves daily execution plans for effective use of all test resources
- Approves test reports to document test results and satisfy requirements. Presents test results internally and externally. Documents and initiates change on lessons learned and performance metrics to improve future testing and makes recommendations to improve processes
25
Junior Test & Evaluation Engineer Resume Examples & Samples
- U.S. Citizen with a Secret Level Security Clearance
- 1-5 years experience with Bachelor’s degree or 10-15 with no degree and military experience
- Technical or engineering degree, experience, or aptitude. Process oriented
- Experience writing Test and Evaluation Master Plans (TEMPs), test plans
- Experience with developmental or operational test plan assessments
- Knowledge of Navy, Marine Corps, or other DoD Operational Test agencies
- U.S. Navy CAC Card
26
Test & Evaluation Engineer Resume Examples & Samples
- Develop Enterprise Test and Evaluation Master Plan (ETEMP) documentation that describes test strategies and approaches across the SMC/RS enterprise
- Collaborate with SMC and AF Space Command (AFSPC) stakeholders to develop and acquire approval of test and evaluation plans
- Interacting with the prime contractor and government leads to ensure that all system test requirements are consistent and valid across the SMC/RS Enterprise
- Developing, documenting, executing, integrating and evolving systems engineering processes as required to enable effective SMC/RS systems engineering Test and Evaluation efforts
- Assessing proposed baseline changes for impacts to planned test activities
- Supporting the customer with test tracking to ensure the activities are executed to plan
- Support for test strategy planning, integration and execution
- Collaborate with SMC stakeholders to develop and acquire approval of test and evaluation plans
- Interact with the prime contractor and government leads to ensure that all system test requirements are consistent with SMC standards
- Assess proposed baseline changes for impacts to planned test activities
- Support the customer with test tracking to ensure the activities are executed to plan
- Make resource recommendations and develop strategies to ensure required test equipment, instrumentation and personnel are available to plan and execute test programs
- Support development of the E-TEMP, coordinate and resolve issues throughout the approval cycle
- Member of the Integrated Test Team (ITT) and associated working groups through test planning for satellite, hosted payload, and control segment test planning to achieve successful certification and Operational Acceptance
- Review prime contractor and Operational Test Agency test plans, procedures, and reports that support overall Operational Acceptance and requirement verification efforts
- Provide oversight and witnessing of contractor test and verification events
- Ensure archival of test and verification artifacts
- Support Deficiency Reporting identification and resolution reporting in accordance with TO 00-35D-54
- Support certification of readiness to enter operational test and AFMAN 63-119 template process
- Candidate will support the development of acquisition-related briefings, plans, papers, and other documentation in support of SMC/RS decision making
- Bachelor’s Degree is required. BS in Electrical Engineering, Aeronautical, Communications Engineering (technical), Math, Physics, or similar
- 9+ years of test development and execution background
- This individual must have experience in Department of Defense (DoD) Space-Based systems
- Strong understanding of fundamental test and evaluation processes
- Extremely motivated individual who is a self-starter and works well in a team environment
- Top Secret Clearance with Current SSBI required
- Master’s Degree is preferred
- Active TS/SCI Clearance Highly Desired
27
Senior Test & Evaluation Engineer Resume Examples & Samples
- Provide, plan, and support data analysis, requirements management, product and services, technical and systems operation support, for Test & Evaluation (T&E), Engineering Test (ET), Developmental Testing (DT), Systems Integration Testing (SIT), Combat System Ship Qualification Testing (CSSQT), Follow-on Test & Evaluation (FOT&E), and post event studies
- Prepare data repositories which are accessible by both the Government and Contractor for collaboration
- Prepare, update, and maintain documentation for T&E, ET, DT, SIT, CSSQT, FOT&E, and post event studies
- Review, modify, and develop configuration control, engineering, and support documentation for T&E, interface control, system design, system performance specifications, computer program changes, test plans, procedures, scenarios, reports, schedules, results, systems engineering test packages and presentations. Test events include ET, DT, SIT, CSSQT and FOT&E. Maintenance includes engineering configuration management
- Support and execute technical evaluation, engineering testing, and console operations
- Review, analyze, comment, recommend, and prepare test support for DT, OT, CSSQT, and FOT&E
- Track, verify and validate, maintain, and review test requirements including operational and performance functionality, documentation of results, redlining procedures, recommendations for modernization, technology refreshes, and test observation reports for the T&E requirements database
- Collect, review, verify, maintain, and track test requirements. Specific locations, requirements, and performance standards will be identified in the individual TI. (CDRL A006, CDRL A007, CDRL A008, CDRL A009)
- Plan, prepare reports, schedule, coordinate, collect inputs, status and tracks to the Enterprise Level T&E events for test requirements objectives, schedules, and working groups
- Analyze, recommend, present, prepare metrics, system testing, software testing reliability, maintainability, and identify value added characteristics of the program as a result of cost saving and risk
- Provide T&E services which includes engineering analysis, assessment of system performance and operation, capabilities, interoperability, development of test plan documentation, including test plans, requirements, specification, procedures, engineering recommendations, and other technical report
- Plan, extract, collect, reduce, support, and analyze the collection of data for posttest analysis and review. Specific locations, requirements, and performance standards will be identified in the individual TI. (CDRL A008, CDRL A009)
- Education: A Master’s degree (MS/MA) from an accredited college or university in an applicable Engineering, Mathematics, or Business discipline
- Previous engineering experience with test planning, scheduling, execution and reporting is required for this position. In addition, experience with technical T&E briefs at the Captain level is critical role of the SSDS Project
28
Test & Evaluation Engineer Resume Examples & Samples
- Candidate must have experience in sensors / electro-optical sensors / RF sensors on Army Aviation platforms. Must be technically proficient with Aviation platform sensors in general and specific technical capability with electro-optical and radio frequency (RF) sensors
- Must be able to link the technical capability of the platform sensors, technical risks and costs to overall Project goals and schedule
- Must have test experience to ensure key system / component/ subsystem performance capabilities are incorporated and demonstrated in test plans
- Must have good communication / briefing skills to confirm to key stakeholders and Project leadership that key test / engineering objectives have been achieved via test reports and briefings
- Program Office experience with a general understanding of how the test / engineering process relates to the program / acquisition process
- Understanding of the systems engineering process to review requirements allocation and traceability
- Must have a good working knowledge of test plans and test reports
29
CBP OA Test & Evaluation Engineer Resume Examples & Samples
- Assist with planning functional test & evaluation events, including test parameters, cases, methodology, and criteria
- Observe and record results of in-field testing
- Develop test reports and briefings to communicate results
30
Test & Evaluation Engineer Resume Examples & Samples
- Develops solutions to calibration systems problems of limited scope and impact
- Designs test hardware, software and systems to achieve test requirements
- Uses analytical tools to verify the design
- Analyzes, processes, and formats data to customer requirements
- Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer
- Prepares and publishes test reports to document test results and satisfy requirements
- Presents test results internally
- Archives data and reports
- Trains others
- Experience in developing detailed test points from system level specification requirements, test planning, execution and reporting test results
- Aerial Refueling, Bomber or Military Derivative Flight Test experience
- Experience in FAA certification, airworthiness or weapon systems flight testing
31
Test & Evaluation Engineer Resume Examples & Samples
- Develops simple test procedures, and instrumentation and configuration definition needed to perform the test and minimize risk
- Designs component and sub-assembly level hardware or software and uses analytical tools to verify the design
- Assists in coordinating the manufacture and assembly of test hardware
- Identifies solutions to basic problems and supports the development of metrology processes, methods, and tools
- Supports development of test debrief material. Participates in evaluation of test performance data
- Reviews test data for accuracy, quality and/or fidelity prior to delivery to customer
- Alerts senior engineers of off-nominal data
- Prepares test reports for review
32
Test & Evaluation Engineer Resume Examples & Samples
- Participates in testing, troubleshooting and analysis on the development of systems
- Provides support in the development, implementation and maintenance of test processes and diagnostic programs
- Bachelor's degree in Engineering, Sciences, Math, or related field and 5+ Years of experience of test planning, execution, and reporting, or equivalent combination of education and experience
- Strong capability in Microsoft Excel
- Ability to travel to remote CONUS areas
33
Test & Evaluation Engineer, Senior Resume Examples & Samples
- 8+ years of experience with test and evaluation
- 5+ years of experience with systems engineering
- 5+ years of experience with major Defense Acquisitions Program acquisition
- 3+ years of experience with requirements analysis
- 3+ years of experience with developing test and evaluation master plans
- Experience in working with PMs, program offices, combatant command staffs, senior leaders, and other stakeholders throughout the DoD
- TS/SCI clearance
- Experience with supporting a CAT 1 Program of Record
- BA or BS degree in Computer Science, Engineering, Information Technology, or related field
34
Test & Evaluation Engineer Resume Examples & Samples
- 6 + years' experience with Test and Evaluation
- DoD secret clearance
- Experience with surface ships, helicopters, undersea or Anti-submarine warfare a plus
- Must have experience writing Test and Evaluation Master Plans (TEMPs) and test plans; experience with developmental or operational test plan assessments
- Knowledge of Navy, Marine Corps, or other DoD Developmental or Operational Test agencies
- Prefer the 6 years of experience with the United States Navy
35
Test & Evaluation Engineer Resume Examples & Samples
- Working with internal and external customers to develop and document data analysis requirements to satisfy test objectives
- Support the development of test plans for flight test and lab calibration tests
- Design, develop, and implement complex calculations in support of test objectives
- Coordination with test facility personnel to maintain test readiness in support of real-time data display/recording
- Troubleshoot/fix/support test data issues before, during, and after test activities
- Supporting real-time testing and using Personal Computer (PC) hardware/software to process & analyze test data
- Troubleshooting problematic test data and coordinating with instrumentation and software programming personnel for problem fixes and new installation/development
- Analyzing recorded and calculated test data & assessing for quality prior to release to data end-users
- Updating & maintaining Avionics data bus traffic and/or Post Code Modulation (PCM) format definition files/databases for use in data recording & processing
- Must be able to obtain and maintain FAA class 3 flight physical certification
- Must be able complete training in full flight gear (Helmet, gloves, boots, flight suit, parachute harness and survival vest) Training includes a surface swim, treading water, drown proofing, egress underwater swim, orally inflating a life vest, and a hypobaric chamber flight
- To meet P-8A seat safety requirements candidates must not exceed 250 lbs
- Candidates must be able to obtain a Secret level interim pre-hire and final clearance post hire
36
Electronic Warfare Test & Evaluation Engineer Resume Examples & Samples
- 5 years of experience in Flight Test, including NAWCAD
- Experience with APR-39 or H-53 systems
- Experience with sustained leadership and management over the course of a career
- Experience in Electronic Warfare systems design, test, and operations
- Ability to lead test projects
- BA or BS degree in Engineering, Mathematics, or Physics
37
Test & Evaluation Engineer Resume Examples & Samples
- Develop and provide test plans for customer issues and limited scope projects
- Design and acquire required test equipment/fixtures from vendors
- Conduct product evaluations using internal and external standards for test work
- Document tests conducted, results, issues encountered and the solutions developed
- Manage workload to ensure timely and accurate completion of tasks
- May oversee the work of Co-op/intern engineers, lab technicians, or other junior engineers
- Uses geometric dimensioning and tolerancing as needed
- Performs test and evaluation facility upgrades and maintenance
- 0-3 years of related experience preferred
38
Test & Evaluation Engineer Resume Examples & Samples
- Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry
- ABET accredited Bachelor of Science in Electrical Engineering,
- Familiar with digital & analog electrical circuits,
- Experience with some scientific software language (i.e. ADA, Visual C++, C#, .NET) is required
- Four to seven years experience in the aerospace or electronic test related industry
- Previous experience with Electronic/Electrical Test Equipment (system design, ATE) and aircraft systems experience (avionics, MIL-STD-1553, Fibre Channel) and RF systems is also desired
- Prior experience with embedded systems software is preferred. Both hardware and software design experience will ensure success
- Effective communication skills are desired along with the ability to use Microsoft Office tool suite
- Basic project management and reporting skills are also helpful
39
Awacs Test & Evaluation Engineer Resume Examples & Samples
- Relevant technical experience in the areas related to one of the following: Command, Control, Communications, Computers, and Intelligence (C4I), RF test equipment, UHF/VHF/HF systems, satellite communications, networking equipment, testing processes
- Skilled with one or more programming languages (Matlab, Fortran, Java, Python, C/C++)
- Strong background in RF technology, including antenna theory, solid state electronics, waveform generators, spectrum analyzers, telemetry and signal analysis
- Demonstrated ability to work effectively on a team and to lead and direct the work of others
- Possesses effective oral and written communications skills
- Proficiency in the use and integration of MS Office applications required
- Active SECRET security clearance; capable and willing to obtain TS/SCI upon application. An active Top Secret Security clearance is highly desired
- Understanding of development test and evaluation processes, specifically - acquisition program development and detailed knowledge of Air Force C2 test methodologies
- Design of experiments (DoE) and data analysis and project management, applied to development and operational testing of sensors, electromagnetic and aerospace systems
- Experience on DOD C4ISR weapon system acquisition, systems engineering, and test engineering
- Knowledge of systems analysis and application software concepts, functions, techniques, and capabilities sufficient enough to evaluate emerging technologies in a development environment
40
Test & Evaluation Engineer Resume Examples & Samples
- BA or BS degree or equivalent experience in lieu of degree
- Experience working with military or DoD civilian clients and managing professional relationships
- 3+ years demonstrated experience in multi-faceted tests and test project teams, to include oversight of scheduling
- 3+ years test and evaluation experience with DoD/USAF test processes and documentation
- 3+ years of experience with MILSATCOM
- 9+ years’ experience in systems engineering
- 3+ years’ experience with military space systems and protected MILSATCOM systems
- 3+ years’ experience with ground systems, such as terminals and networks
- Master's degree in Engineering is preferred
41
Enterprise Test & Evaluation Engineer Resume Examples & Samples
- Technical leadership for the test program, including test approach
- Analyzes system requirements and concept of operations document and system descriptions to develop evaluation and test plans and procedures, prepare for and conduct the data collection and analysis, and report status and results
- Writes test and evaluation documentation e.g., Test & Evaluation (T&E) Strategy, Test & Evaluation Master Plan, Event Test Plans, Test Readiness Assessments, and T&E Reports. Works with other test organizations to support T&E program integration
- Support for customer interface, recruiting, test-tool introduction, test planning, staff supervision, and cost and progress status reporting
- Verifying the quality of the requirements, including testability, requirement definition, test design, test-script and test-data development, test automation, test-environment configuration; testscript configuration management, and test execution
- Staying current on latest test approaches and tools
- Conducting test-design and test procedure walk-throughs and inspections
- Implementing test-process improvements resulting from lessons learned and benefits surveys
- Test Traceability Matrix (tracing the test procedures to the test requirements)
- Test-process implementation
- Ensuring that test-product documentation is complete
- Expertise in a variety of technical skills including programming languages, database technologies, and computer operating systems along with technologies such as virtualization, software defined networks, etc
- Familiar with test-program concerns including test-data management, trouble reporting and resolution, test design, and test development
- 15-20 YEARS OF EXPERIENCE IN AREA OF EXPERTISE
42
Test & Evaluation Engineer Resume Examples & Samples
- Participates in gathering and analyzing requirements for tests and demonstrations of mission system sensors
- Assists in the development of test procedures, and instrumentation and configuration definition to perform the test within the constraints of the test plan
- Develops solutions to calibration systems problems and general troubleshooting. Performs data analysis, develops and utilizes data processing tools
- Designs simple component level hardware or software. Uses analytical tools to verify the design
- Verifies collection of complete data set. Maintains test logs, prepares simple test reports and archives data
- Works under direct supervision
- Must be able complete training in full flight gear (Helmet, gloves, boots, flight suit, parachute harness and survival vest)
- Training includes a surface swim, treading water, drown proofing, egress underwater swim, orally inflating a life vest, and a hypobaric chamber flight
43
Test & Evaluation Engineer Resume Examples & Samples
- Experience in the use of electrical test equipment such as digital multi-meter, spectrum analyzer, signal generator, vector network Analyzer and oscilloscope
- Experience do you have with RF (Radio Frequency) measurements and testing
- Current TS/SCI Clearance is preferred but not required
44
Test & Evaluation Engineer Resume Examples & Samples
- The candidate will provide T&E and program management support to PEO IWS 1TE
- Participate in major test planning meetings designed to translate Surface Ship combat system engineering requirements into test objectives and test plans and the identification of test resources
- Coordinate with Navy Field Activities, program offices, agencies and defense contractors in the planning and execution AEGIS weapon system and other combat system test events
- Develop technical briefings to higher authorities and customers as required including study results, findings, overarching T&E strategies and recommendations involving multiple Navy Programs
- Frequent travel to test sites, industry sites, and customer locations for on-site technical support work and Navy range operations
- Candidate should be capable of understanding and analyzing technical and programmatic aspects of numerous unique programs and organizations, able to work independently as well as within dynamic team environments that include senior technical personnel, and possess strong verbal and written communication skills including MS Office proficiency
- Undergraduate degree in Engineering, Science, or Management
- Prior Navy or Military Service
- Experience with Navy T&E
- Navy weapon system acquisition workforce/contractor experience
45
Test & Evaluation Engineer Resume Examples & Samples
- Plans and directs the removal of instrumentation test systems including refurbishment and disposition of test articles in order to restore the test article to pre-test or salvageable configuration by utilizing pre-defined procedures and design documentation
- Develops project plans using the principles of project management in order the achieve program cost, schedule and performance goals. Identifies and creates measurement approaches
- Responsible for coordinating and communicating regularly with experts in Boeing organizations around the world
- Periodic update on project progress, quality metrics, project summaries, and other related documents. Contribute to productivity improvement through use of Quality Management System and Lean principles
- This position will be located in the Boeing India Engineering and Technology Center, Bangalore, India
- Candidate should have familiarity with varying parameters of Test Equipment. Completely understand and apply job practices, techniques, standards, principles, theories, and concepts to identify lowest cost options to meet measurement requirements
- Prior experience in metrology specifically in performing test system analysis; identify efficient and effective methods to integrate components; equipment life-cycle modeling; equipment optimization; inventory review and inventory risk management
- Should have strong analytical skills to review large data sets and generate recommendations. Must be very comfortable with the analysis tools in Microsoft Excel. Highly desirable to be proficient with SQL, R, Tableau
- Candidate should have experience to comprehend test requirements and identify alternative approaches to perform measurement
- Develop and maintain relationships / partnerships with customers, stakeholders, peers, and partners to develop collaborative plans and execute on projects
- Must be flexible, with a high tolerance for organizational complexity and ability to work with team members across different cultures and time-zones
- Demonstrate strong written, verbal and interpersonal communication skills. Be fluent in written and spoken English, and have high degree of proficiency with MS Office tools to prepare comprehensive reports,
- Awareness of AS9100 or ISO9001 quality management system and ISO 17025 standard
46
Test & Evaluation Engineer Resume Examples & Samples
- The candidate will provide technical solutions to a wide range of difficult problems where analysis of data requires evaluation of identifiable factors. Solutions are imaginative, thorough, practicable and consistent with organization objectives
- Contributes to completion of specific programs and projects
- Failure to obtain results or erroneous decisions or recommendations would typically result in serious program delays and considerable expenditure of resources
- Frequent inter- organizational and outside customer contacts
- Works under only general direction. Independently determines and develops approach to solutions
- Work is reviewed upon completion for adequacy in meeting objectives
- Complete understanding and wide application of technical principles, theories, and concepts in the field
- General knowledge of other related disciplines. Receives assignments in the form of objectives and establishes goals to meet outlined objectives
- Work is reviewed by management to measure whether objectives have been met
- Bachelors and five (5) years or more of related experience; Masters and three (3) years or more related experience; PhD and 0 years experience
47
Next Generation Jammer Electronic Warfare Test & Evaluation Engineer Resume Examples & Samples
- 5+ years of experience in flight testing with a NAVAIR organization
- Experience with planning and coordinating flight tests
- Experience with avionics testing techniques
48
Test & Evaluation Engineer Resume Examples & Samples
- Supports the development and verification of test methods in support of seeker production
- Presents test results internally. Archives data and reports
- Work with management, Engineering, equipment manufacturers, vendors, and other organizations to analyze and make recommendations on automated test equipment design requirements, capability and improvements
- Aids with troubleshooting and repair of RF Seekers and subsystems
- More than 3 years of cumulative experience in test software design such as National Instruments LabView
- Experience testing and troubleshooting of radio frequency (RF) technology
- Experience with test equipment including RF (radio frequency) sources, power meters, and spectrum analyzers
- Experience in RF (radio frequency) Testing (Power, Pulsed Power and Harmonics)
- MS Access experience using (VBA) Visual Basic for applications programming
- Experience designing high dynamic range, broadband RF (radio frequency) tuners and exciters for use in Software Defined Radios
49
Test & Evaluation Engineer Resume Examples & Samples
- Provide test and evaluation planning, coordination, and execution services for all programs within program. Design, plan, program, coordinate, and execute a viable Test and Evaluation program. This program shall include testing for the full range of programs within program, to include: prototypes, rapid acquisition, and traditional DoD programs
- Prepare, coordinate, distribute, and maintain test documentation to include: System Evaluation Plans, Test and Evaluation Master Plans (TEMP), Measures of Effectiveness (MOE), Measures of Performance (MOP), and test plans. Test documentation shall be prepared IAW Army Regulation (AR) 73-1 - Test and Evaluation Policy, AR 73-2, and DA Pamphlet 73-2. Participate in planning, forecasting costs, coordinating, and executing test events
- Prepare test reports to address measures and issues identified in test and evaluation documents
- Provide test and evaluation (T&E) services to design, plan, execute, assess, and report developmental T&E programs or portions of developmental T&E programs, for systems managed by program. Ensure effective and timely system integration during the life-cycle of the system to allow for T&E of the total system
- Provide adequate and efficient design reviews, audits, and quality assurance (QA) reports for T&E programs for the system being acquired. Provide Verification, Validation, and Accreditation (VV&A) during software development. At program initiation, develop System Threat Assessment Reports in coordination with the threat community in conjunction with AR 381-11
- Provide test support documentation for test items to the test organizations
- Develop and provide the Safety Assessment Report
- Coordinate with the T&E working groups, to ensure that T&E of all systems is planned and conducted to sufficiently stress the systems in representative environments
- Must have and maintain an Active TOP SECRET SCI security clearance
- Bachelor’s degree in computer science, computer engineering, network security, OR equivalent experience, significant domain knowledge and customer intimacy
- 5+ years minimum experience in support of ISR and/or IT system test and evaluation
- Minimum of 8 years overall technical experience
- Demonstrated experience in testing IT and/or satellite systems
- Knowledge of the DoD and IC customer's verification, validation, and assessment processes
- Master's degree in pertinent field preferred
- PMP or equivalent preferred
- Knowledge of IC functional manager’s organizations, roles and responsibilities within the current customer intelligence community
50
Test & Evaluation Engineer Resume Examples & Samples
- Analyze results of testing using statistical methods - Develop test reports and briefings to communicate results
- Experience in the full breadth of acquisition, particularly programming, planning, acquisition, requirements or test
- Ability to travel to remote CONUS areas It would be great if you also had: - Experience with surveillance technologies
- Strong oral and communication skills - Ability to work as part of a team and independently
51
Test & Evaluation Engineer Resume Examples & Samples
- Plan and coordinate ground and flight test mission requirements with responsible engineers from internal and external customers
- Execute ground and flight tests as the aircraft team leader to include coordination of instrumentation and data requirements, aircraft maintenance, scheduling, and long term planning
- Develop flight test and mission profiles, develop and publish test plans, create flight test cards, and manage test schedules
- Identify and coordinate the availability of test ranges and facilities
- Participate in test planning working group meetings, plan and conduct technical and safety review boards, plan and conduct flight test readiness reviews, and conduct pre- and post-test briefings
- Conduct ground and flight tests in accordance with established test plans and procedures
- Participate in post-test data evaluation and problem identification and resolution
- Prepare and publish test summaries and test reports
- This position requires an active Top Secret U.S. Security Clearance. (A U.S. Security Clearance that has been active in the past 24 months is considered active.)
- Experience with aircraft ground and flight tests
- Prefer candidate with current Special Programs Access
- Candidate should be self-motivated
- Candidate should have ability to effectively interface with personnel from multiple engineering, manufacturing, and operations disciplines
- Candidate should have demonstrated skills in operations safety
