Mechanic Lead Job Description
Mechanic lead
provides diagnosis and repair of DS armored vehicles and makes independent assessment of the best course of action based on specifications in technical manuals and accepted industry practices.
Mechanic Lead Duties & Responsibilities
To write an effective mechanic lead job description, begin by listing detailed duties, responsibilities and expectations. We have included mechanic lead job description templates that you can modify and use.
Sample responsibilities for this position include:
Comply with all Federal, Coast Guard, OSHA and Company Regulations, Policies and Procedures
Assigns job duties to Maintenance Mechanics
Responsible for evaluating job performance of Maintenance Mechanics
Supervise and safety train contractors
Leads by example to maintain all areas of the plant in a neat, clean, and organized manner
Produces, maintains, and manages all plant equipment maintenance and repair records in accordance with federal, state, local, environmental, corporate, and insurance requirements
Supports Operations, Instrument and Controls, and Distribution departments as required
Environmental responsibilities also include managing of documentation for inventories and manifest required for CFCs, Hazardous, Universal and Residual wastes streams
Manages and supports specifications for capital and major maintenance projects
Responsible for all Allegheny General Hospital Emergency Standby Boiler and ancillary equipment maintenance and inspection duties and to support Carnegie Science Center satellite plant equipment
Mechanic Lead Qualifications
Qualifications for a job description may include education, certification, and experience.
Licensing or Certifications for Mechanic Lead
List any licenses or certifications required by the position: ASE, MRPT, A&P, CFC, EPA, FAA, II, A/B, AWS, R20
Education for Mechanic Lead
Typically a job would require a certain level of education.
Employers hiring for the mechanic lead job most commonly would prefer for their future employee to have a relevant degree such as Collage and High School Degree in Technical, Education, Management, Associates, General Education, Industrial, Military, Secondary Education, Graduate, Automotive Technology
Skills for Mechanic Lead
Desired skills for mechanic lead include:
Applicable aircraft
Applicable technical publication
Industry standards to ensure the best products at the best prices
Policies and procedures
Administration
Occupational hazards and the proper safety precautions involved in maintaining motorized equipment and light vehicles
Principles and practices of organization
Supervision
Basic and complex maintenance and repair
Follow all rules
Desired experience for mechanic lead includes:
Understanding of manufacturers’ technical publications and wiring diagrams, technique of operating and maintaining internalcombustion engines
Responsible for Annual backflow preventer testing
Use of SAP to create work orders
Evaluate and purchase supplies and parts for the plant and equipment
Combined 5+ years’ experience in the service, maintenance, and operation of centrifugal compression refrigeration using R123, R-12, R-22, and R-134a with an emphasis on water cooled units with flooded evaporators
Combined 5+ years’ experience in the service, maintenance, and operation of cross-flow and counter-flow towers, splash fill and film fill, motor driven axial flow fans, right angle gear reduction units, blade pitch adjusting and shaft alignments
Mechanic Lead Examples
1
Mechanic Lead Job Description
Job Description Example
Our company is looking for a mechanic lead. We appreciate you taking the time to review the list of qualifications and to apply for the position. If you don’t fill all of the qualifications, you may still be considered depending on your level of experience.
Responsibilities for mechanic lead
- Direct Maintenance Mechanics to safely and properly maintain plant equipment, with the goal of 100% reliability and minimum downtime for unexpected repairs
- Cover Operations and Maintenance positions as required
- Assign job duties to Maintenance Mechanics and monitor progress
- Evaluate job performance of Maintenance Mechanics
- Lead by example to maintain all areas of the plant in a neat, clean, and organized manner
- Produce, maintain, and manage all plant equipment maintenance and repair records in accordance with federal, state, local, environmental, corporate, and insurance requirements
- Support Operations, Instrument and Controls, and Distribution departments as required
- Manager Environmental responsibilities including completion of required documentation for inventories and manifests of CFCs, Hazardous, Universal and Residual waste streams
- Manage and support specifications for capital and major maintenance projects
- Maintain working knowledge of and use of SAP system to create work orders
Qualifications for mechanic lead
- Physical ability to enter and exit boiler steam drum and fireside
- FAA Air Frame & Power Plant certificate is required or equivalent home country certification
- Must possess knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders
- Must possess a current passport or the ability to obtain one before assignment
- Possess, or ability to obtain DoS Moderate Risk Public Trust (MRPT) through DoS Background Investigations is a condition of employment
- Eight (8) years minimum aircraft maintenance experience with five (5) years of experience on of the assigned aircraft
2
Mechanic Lead Job Description
Job Description Example
Our innovative and growing company is hiring for a mechanic lead. To join our growing team, please review the list of responsibilities and qualifications.
Responsibilities for mechanic lead
- Performs generator set inspections and maintenance as required
- Provides serviceable equipment to NYANG or USAF as requested
- Maintains lines of communications with supervisor, mechanics and customers
- Writes performance evaluations on AGE mechanics
- Services aircraft latrines, empties urinals
- Suggest and help develop new ideas to improve the quality and safety of the AGE department
- Documents work performed, status of equipment, maintains records and generates reports as required
- Informs AGE supervisor of discrepancies and facilities problem resolution
- Recommends parts re-supply to the AGE supervisor
- Supervises maintenance and repair of AGE in town and at the airfields
Qualifications for mechanic lead
- Thorough knowledge of utility and sewer systems associated with hotel operations
- A combination of education, training and experience that provides the necessary knowledge, skills and abilities to perform the job
- 5+ years of commercial kitchen experience
- Experience with natural gas equipment
- Minimum 2 years of electrical/mechanical industrial maintenance experience required
- Must proficiently troubleshoot, operate, and train others on all major production and support equipment
3
Mechanic Lead Job Description
Job Description Example
Our growing company is hiring for a mechanic lead. Thank you in advance for taking a look at the list of responsibilities and qualifications. We look forward to reviewing your resume.
Responsibilities for mechanic lead
- Will act as Site Superintendent when needed
- Will perform operational, maintenance, and repair work and may also assign and supervise the duties performed by building maintenance mechanics, review their daily work requests, document areas of consistent problems and forward to supervisor daily recommending corrective action and contractor involvement, if necessary
- Authorize and direct other mechanics to make corrective actions as necessary to ensure tenant comfort and safety
- Performs and assigns resources to handle general repairs and services in all maintenance related disciplines, including
- Coordinates with other mechanics in the repair and service of building and HVAC equipment
- Helps to ensure all building and maintenance policies, procedures, SOP’s, JCOH standards, codes, regulations, are followed and enforced including safety systems and standards
- May be required to handle compressed gas cylinders
- Able to work overtime and some weekends as requested
- Help Create SOPs for maintenance processes to allow for uniform training and process controls
- Examines machines and mechanical equipment to diagnose sources of trouble
Qualifications for mechanic lead
- Ability to identify defective parts and materials
- Must demonstrate Advanced Electrical troubleshooting skills (PLC, Servos, PID, VFD, RS Logix, Devicenet)
- Work schedule as assigned (days/evening shifts) including weekend and overtime assignments
- Basic math skills (addition, subtraction, multiplication, fractions decimals)
- Successful completion of mandatory drug screen and background check upon job offer
- Mechanical aptitude and experience related to electrical circuitry and hydraulics preferred
4
Mechanic Lead Job Description
Job Description Example
Our growing company is searching for experienced candidates for the position of mechanic lead. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for mechanic lead
- Check all drawers and cabinet doors for alignment and repair
- Check all windows and operating mechanisms and repair as necessary
- Check for electrical issues with wire molding or loose receptacles and switches
- Perform general carpentry work in construction, alteration, and repair of wood and wood substitute items and structures
- Install, repair, and replace new doors, windows, hardware, and glass
- Install flooring, floor coverings, and floor partitions
- Install and repair ceilings and tiles
- Patch broken plaster and drywall
- Erect walls, hang dry wall, and install door frames
- Stain and paint unfinished wood
Qualifications for mechanic lead
- Heavy equipment maintenance experience preferred
- Possess advanced mechanical and electrical aptitude
- Minimum 3 years industrial plant operations, maintenance and/or equivalent technical supervisory and project management experience
- Good working knowledge of MS Office (Excel, Word and Outlook)
- Candidates are required to receive a rating of Recommended on the Pre-employment Assessment test
- One year of full-time experience as a Maintenance Mechanic 2, journey-level trades worker, or equivalent
5
Mechanic Lead Job Description
Job Description Example
Our innovative and growing company is searching for experienced candidates for the position of mechanic lead. If you are looking for an exciting place to work, please take a look at the list of qualifications below.
Responsibilities for mechanic lead
- Serve as first responder to urgent and emergency work requests, performs skilled and semiskilled repair/maintenance work
- Perform other responsibilities assigned by supervisor and campus facilities
- Performs frequent daily site inspections of ongoing work and review of upcoming work
- Overseas Safety within Maintenance workshop and completes required Safety activities such as monthly inspections, updates safety boards, conduct daily toolbox talks, as per company safety policy
- Assign work to other mechanics
- Perform all required maintenance and repairs to various types of equipment while working within the budget provided to you by management
- Supervise, train and mentor shop laborers, and any registered apprentices in the shop, as required
- Timely and accurate completion of all required paperwork such as Repair Orders, Inspections, and Inventory Sheets
- Respond to client and staff service phone calls in the office and/or shop and discuss maintenance and repair decisions with internal and external customer as required
- Ensure expected completion timelines for various repairs are met and that equipment is repaired and sent out in a timely preventative maintenance manner
Qualifications for mechanic lead
- District Energy experience preferred
- Must have knowledge of FAA part 135 operations and maintenance procedures
- Demonstrated experience working hard-to-access areas
- 3+ years work experience leading others in a team environment
- Individual must have basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers
- Building construction and maintenance procedures