Engineer Electronics Resume Samples
4.6
(116 votes) for
Engineer Electronics Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the engineer electronics job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
RF
R Frami
Rupert
Frami
939 Matteo Parks
Phoenix
AZ
+1 (555) 945 1634
939 Matteo Parks
Phoenix
AZ
Phone
p
+1 (555) 945 1634
Experience
Experience
Detroit, MI
Engineer Electronics
Detroit, MI
Walsh-Ernser
Detroit, MI
Engineer Electronics
- Analyze and evaluate system performance
- Developing engineering documentation for system configuration
- Provide resolution of component issues due to obsolescence
- Perform installation and integration of tactical systems and land-based simulators
- Support the development of new business with bid and proposal inputs on technical components, assemblies, and systems
- Evaluate specification modifications vs. rework of hardware
- Support of ad-hoc tasking providing HW support to SW development, create test procedure documentation and training packages, select and testing of replacement components due to DMS, support field questions and testing
New York, NY
Comms Engineer Electronics
New York, NY
Huel, Buckridge and Klein
New York, NY
Comms Engineer Electronics
- Support development and management of integrated schedules, earned value, risk management, and status reports & briefings and other program communications
- Perform change management and engineering change proposal (ECP) duties, including preparation, analysis, planning and execution
- Perform field integration, trouble-shooting and repair of communications and data link systems
- Perform/support design reviews, or reviews of design related documentation (ICDs, system and subsystem design documents, etc.)
- Perform SIL and flight test planning and execution, both CONUS and OCONUS
- Developing and releasing engineering documentation for the system configuration
- Engineering Process Improvement & Implementation
present
San Francisco, CA
Senior R&D Engineer Electronics & Specialty Gases
San Francisco, CA
Bins, Abbott and Wyman
present
San Francisco, CA
Senior R&D Engineer Electronics & Specialty Gases
present
- Work with Program Development Managers to identify opportunities for and initiate new R&D programs in the electronics and specialty gases market segment
- Maintain alignment with development partners, commercial team and customers through all stages of technology development
- Provide regular program updates and recommendations to senior executive management
- Lead development projects from concept to commercialization
- Drive and direct pilot scale development and customer evaluations
- Conduct resource planning for development funding approval
- Prepare invention disclosures and develop intellectual property for Praxair
Education
Education
Bachelor’s Degree in Electrical Engineering
Bachelor’s Degree in Electrical Engineering
Clark Atlanta University
Bachelor’s Degree in Electrical Engineering
Skills
Skills
- Ability to design and implement VMware high-availability virtualized infrastructures
- Ability to engineer and Test new technical solutions in lab environments
- Ability to release CM controlled documentation, scripts, and COTS software media
- Ability to maintain compatibility with existing architectures when implementing system enhancements
- Ability to automate installation of COTS software
- Ability to script deployments of Microsoft Windows Server and Workstation operating systems
- Ability to maintain COTS Hardware and Software configuration matrix
- Ability to author and maintain technical installation, configuration, and update procedures
- Effective oral and written communication skills and the ability to communicate well and interact successfully with all levels of the organization
- Ability to provide Engineering technical support for peer teams
15 Engineer Electronics resume templates
Read our complete resume writing guides
1
Engineer, Electronics Innovation Resume Examples & Samples
- Develop electronics for new functionalities for equipment, testing apparatuses and processes
- Investigate new technologies like flexible / printed circuits, payment systems and robotic controls that will step-change how we design electronics in the future
- Collaborate with other functions in the concept design center to integrate electronics into the physical prototypes to create functional and interactive mechanisms for evaluating ideas
- This role will dive into complex electronics engineering problems to develop solutions that do not exist in market today. The role will also look to apply existing technologies to new innovations
- Ability to lead any electronics design (PLC's, circuit boards, integration, robotics) and drive further investigations in interactive technologies of the future
- Knowledge in how to develop electronics for new functionalities for equipment, testing apparatuses and processes
- Knowledge of how to investigate new technologies like flexible / printed circuits, payment systems and robotic controls that will step-change how we design electronics in the future
- Ability to collaborate with other teams and team members to integrate electronics into the physical prototypes
- Ability to communicate on complex engineering problems to various levels within the company
2
Engineer Electronics Resume Examples & Samples
- Minimum of 2 years of related experience including hands-on testing, troubleshooting, operation and maintenance of complex systems
- Must be able to obtain and maintain a DoD Top Secret Clearance, US Citizenship is required
- Experience with embedded system, computer networks, data communications, analog & digital circuit design, solids modeling, engineering drawing, and software development
- Active Top Secret security clearance is desired. Applicants without a clearance will be considered
3
Engineer Electronics Resume Examples & Samples
- Document end user and system administrator installation manuals
- Automate ESXi 5.5 installation using scripting tools
- Secure ESXi 5.5 using government STIG guidelines and best practices
- NetApp OnTap support and installation
- Create and support virtual test environments using ESX and OVF templates
- Monitor, support, and deploy Windows and RedHat virtual servers
- Automate the installation of Windows and all Windows third party applications
- Ability to gain and maintain a secret security clearance
- 5 years' experience with Bachelor's Degree or 3 years' experience with Master's Degree
- Desire to work on a multi-disciplined team
- Knowledge of the following
4
Engineer Electronics Resume Examples & Samples
- Perform detailed circuit analysis for analog, digital, electro-mechanical, and RF assemblies
- Provide resolution of component issues due to obsolescence
- Demonstrate proactive interface with cross functional organizations and Government counterparts to resolve issues
- Evaluate circuits/components and all varieties of electronic test equipment
- Support the development of new business with bid and proposal inputs on technical components, assemblies, and systems
- Bachelor of Science in Electrical or Electronics Engineering and 5+ years of electrical hardware experience, 3+ years with a Master's degree, or 0 years with a PhD
- Ability to obtain and maintain Secret security clearance
- Design tool experience and proficiency (ie. OrCAD/Allegro)
- Knowledge of microwave components/antennas up to 18 GHz
- Usage of Vector Network Analyzers
5
Engineer Electronics Resume Examples & Samples
- Oversight of engineers and technicians building systems and installing COTS SW
- Developing and releasing engineering documentation for the system configuration
- Responsible for maintaining build schedule to the program requirements
- Build, integrate and test software/hardware systems for command and control systems and ensure that the installations are properly implemented
- Implement engineering changes to the system as required
- Test and release of system in a documented configuration
- A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline or related field
- With a minimum of 9 years related work experience
- US citizen with an Active Top Secret clearance and the ability to be accessed to a Special Access Program is required
- Master’s Degree in Engineering or Information Technology or related field with a minimum of 7 years related experience
- Experience with Windows Server and Client operating systems, and computer networks
- Experience in performing unit test and initial software/hardware integration and lab/bench testing, developing and maintaining the associated software documentation (hardware and software requirement specifications, hardware design specifications, etc.)
- Experience with script development
- Experience with Oracle database
- Experience with Solaris 10 or 11
6
Engineer Electronics Resume Examples & Samples
- Bachelor’s Degree in Engineering, minimum 9 years of supply chain and/or engineering industry experience; or a Master’s Degree in Engineering and minimum 7 years of supply chain and/or engineering industry experience
- Demonstrated ability to build trusted, collaborative relationships
- Demonstrated project management skills indicating the ability to manage a large set of tasks in a dynamic environment, and the ability to execute business strategies
- Experience working on complex systems for the Department of Defense or commercial high tech products
- U.S. citizen and ability to obtain government security clearance
- Working knowledge of global supply chain/operations/logistics MRP/ERP system tools
- Prior experience managing/developing suppliers in a high tech industry
- Current secret or higher security clearance
- Technical and / or business experience in the circuit card assembly technology domain area
7
Engineer Electronics Resume Examples & Samples
- Supplier management, requirements review/flow down, system integration, test plan development, and test execution of a radar system throughout the entire development, demonstration, and production phases
- Understand all system requirements and develop statements of work and interface control documents, as well as participate in related design reviews
- BS in Engineering (Electrical/Computer Science, Mechanical, or Aerospace) or in a technical discipline (Physics, Mathematics)
- Technical knowledge of radar system software requirements and experience in the definition, design, integration, test, certification (end-to-end development), and operation of a radar system
- Practical working knowledge of radar system integration
- Experience preparing detailed requirements specifications, test plans and procedures, certification plans and procedures, and performance reports
- Ability to comprehend and analyze complex problems, develop solutions, and make decisions that impact the organization’s credibility, operations and services
- Documented ability to interpret numerical data for reporting purposes and prepare and analyze data and figures
- Demonstrated ability to collaborate in a team environment
- Ability to obtain (in a timely manner) and maintain a Top Secret security clearance and access to Special Programs
8
Digital Engineer Electronics Resume Examples & Samples
- BS in Electrical Engineering, Computer Engineering, or comparable engineering discipline
- 9+ years of relevant experience (7+ years with an MS, 4+ years with a PhD)
- Experience with full product life cycle (requirements, design, implementation and test) of FPGA Design and/or ASIC Design
- Experience leading a small project team to successfully complete ASIC Design or FPGA design
- US Citizenship with the ability to obtain and maintain a Secret Security Clearance
9
Engineer Electronics Resume Examples & Samples
- Oversight of engineers and technicians implementing internally developed software
- Review and help develop released engineering documentation for the system configuration
- Review build schedules supporting complex enterprise information systems deployments
- Provide onsite engineering support for system level troubleshooting and observation of system performance
- Generate system level documentation of remote systems for site maintainer use
- A Bachelor of Science degree
- US citizen with an Active Top Secretclearance and the ability to be accessed to a Special Access Program is required
10
Engineer Electronics Resume Examples & Samples
- Candidate must have practical experience working with weapons and payload systems
- BS in Engineering (Electrical, Mechanical, or Aerospace) or related technical discipline (Computer Science, Physics, or Mathematics)
- This position requires the ability to obtain (in a timely manner) and maintain a Top Secret security clearance and access to Special Programs
- MS in Engineering. Greater than 14 years of experience
- Current Top Secret security clearance
11
Engineer Electronics Resume Examples & Samples
- Engineering Drawings & Documentation
- Engineering Process Improvement & Implementation
- Maintenance of schedule to meet program requirements
- Self-Educating on the latest industry equipment and capabilities
- Participation in System Delivery and Audits
- A minimum of 2 years related work experience or a Master's Degree and 0 years work experience
- A US citizen currently or with the ability to obtain a Top Secret clearance and the ability to be accessed to a Special Access Program is required
- Master’s Degree in Engineering or Information Technology or related field
- Experience with system architecture design
- Experience producing technical documentation
- Experience with process refinement for affordability or efficiency
- Experience working in a high-tech computer lab environment
- Experience with program management, including EVMS
12
Engineer Electronics Resume Examples & Samples
- Responsible Engineer for Mission System hardware and subsystem development
- Responsible for computer, storage and network equipment, hardware and subsystem design, development and evaluation
- Responsibilities include: requirements development, hardware and subsystem analysis, generating specifications, preparing statements of work, test procedures/reports, interfacing with sellers and customers, managing supplier activities, supporting troubleshooting efforts, preparing cost estimates, managing seller obsolescence efforts, and coordination of upgrades and retrofits
- Perform liaison duties to disseminate information to Integrated Product Teams; develop schedules and coordinate communications
13
Engineer Electronics Resume Examples & Samples
- Lead teams to develop hardware architectures that will meet requirements
- Provide leadership and mentoring to the junior engineers on the development teams
- Provide guidance at technical reviews for the hardware development teams
- Provide engineering support for product development and current production
- Create circuit card assembly (CCA) schematics, block diagrams, parts lists, and design review packages for complex multilayer printed circuit boards (PCB) that contain the following types of components: FPGA, ADC/DAC, high-speed transceivers, DDR and flash memories
- Establish PCB physical guidelines and oversee the placement, routing and fabrication of the design
- Perform testing of products using high-speed oscilloscopes, signal generators, signal analyzers, Matlab, FPGA debugging tools, and “home grown” test sets
- Perform FPGA design and documentation. FPGA product families utilized are Xilinx Kintex7, Virtex7, Zynq, and Altera Stratix
- Release engineering and manufacturing documentation in order to support projects
- Support production and manufacturing activities, including planning and materials procurement
- Support proposal development, basis of estimate generation, program planning and execution
- Bachelor of Science degree in Electrical Engineering or Computer Engineering with 9 years of relevant experience
- Minimum of 3 years leadership of a hardware development team
- Knowledge of schematic capture tool(s)
- Proficiency in FPGA development, simulation, and verification tool(s) including MATLab, Simulink
- Must be a US Citizen and must be able obtain a security clearance
- Masters degree in Electrical Engineering
- Knowledge of Mentor Graphics circuit card development tools. Expedition Enterprise a plus
- Knowledge of Xilinx FPGA development tools. Vivado a plus
- Experience with digital signal processing and software defined radios a plus
- Low-level software experience to facilitate hardware/software integration of FPGA designs
- Experience in defense systems designs a plus
- Currently active security clearance a plus
14
Engineer, Electronics Resume Examples & Samples
- B.Sc/M.Sc in Electrical engineering, or similar
- Experience in PCBA design and specification
- Strong foundation in EMC and experience in planning and risk mitigation in relation to EMC
- Experience in design of common power electronics
- English, spoken and written
- Ability to actively work as part of a team/project team
- Ability to connect the dots between own tasks and project/team deliverables, work proactively and independent, and engage in technical debate with other functions
- Good understanding of digital electronics
- Ability to use Matlab, Simulink or similar simulation tools
- Ability to work in Cadence and/or Mentor Graphics
- Knowledge of LED driver technology
15
Engineer Electronics Resume Examples & Samples
- Bachelor of Science degree in Electrical Engineering, Computer Engineering or related field with 3-8 years of relevant work experience
- Experience in FPGA development, simulation, and verification tool(s) including MATLab, Simulink
- Experience with Digital Signal Processing a plus
- Low-level software experience to facilitate Hardware/Software integration of FPGA designs
- Experience with scripting languages (Python, Bash, etc.)
16
New Grad Engineer Electronics Direct Resume Examples & Samples
- Design/Modification of RF Circuits
- Use of simulation tools to predict circuit performance
- Testing of RF/Analog Circuits
- Support layout of RF/Analog circuits
- Generation of schematics for RF/Analog
- Bachelor’s Degree in Electronics/Electrical Engineering
- Have an overall cumulative GPA of 3.25/4.0 or higher (unofficial academic transcripts must be provided at time of application by uploading the documents to your application or profile)
- Be able to obtain a U.S. Government Top Secret security clearance (U.S. citizenship is a pre-requisite)
- Basic knowledge of RF test Equipment
- Previous internship/co-op experience and activities (professional/community/extracurricular)
- Master’s Degree in Electronics/Electrical Engineering
- Proficient with RF Test equipment
- Working knowledge of simulation tools such as ADS, HFSS, and MATLAB
- Design of RF circuits, either through internships or university classwork
17
Engineer Electronics Resume Examples & Samples
- Design and test analog electronic circuits, and simulate analog or mixed-signal circuits to ensure that performance, noise, timing, and power requirements are all satisfied (analog)
- Generate and review development and design approaches for adequacy, feasibility, cost, and conformance to overall goals and best engineering practices (both)
- Ensure assigned aerospace and/or ground support equipment meet project objectives and environmental conditions and are compatible with ground data acquisition and processing capabilities (analog)
- Write and review technical goals and approaches, while monitoring progress during development, design, and testing. Provide advanced technical assistance in development, design, and integration of technologies and systems. (both)
- Design, simulate and test advanced digital circuits; design Actel and Xilinx field programmable gate arrays (FPGAs) using very-high-speed integrated circuit (VHSIC) hardware description language (HDL) (digital)
- Generate and review development and design approaches; present results at project reviews and technical conferences (both)
- Review and analyze existing system designs in order to initiate redesign or modifications to improve operational effectiveness or reparability of hardware; design or direct the development of unique or leading edge technology, hardware, equipment, or systems to meet specific mission requirements; manage engineering team efforts related to the study, development, and test of hardware, data system components, or equipment (optional)
- Bachelors in Electrical Engineering or related field
- 6 years of experience in analog and/or digital electronics design engineering
- Experience with full life cycle software development
- Experience with electrical board design (experience with the ALTIUM design software)
- Consultation experience in the field of digital hardware system design
18
Engineer Electronics Resume Examples & Samples
- Candidate must have practical experience working with Imagery Intelligence or Electronic Warfare airborne payload systems and a
- Active Secret clearance is required to start
- Practical experience working with other airborne payload systems in addition to Imagery Intelligence or Electronic Warfare systems
19
Engineer Electronics Resume Examples & Samples
- BS in Engineering (Electrical/Computer Science, Mechanical, or Aerospace or related technical discipline (Physics, Mathematics)
- Practical experience working with imagery intelligence or electronic warfare airborne payload systems
- Active Secret Clearance required to start
- Current active Top Secret Security Clearance
20
Engineer Electronics Resume Examples & Samples
- High efficiency, switch-mode power supply architectures for image processing, embedded processing, and Receiver/Exciter designs
- Subsystem/module circuit designs for custom and commercial-off-the-shelf (COTS) systems, involving COTS & MIL-STD interfaces
- BS degree in Electrical Engineering with 14 years of relevant experience; or MS degree in Electrical Engineering with 12 years of relevant experience
- Switch Mode Power Supply circuit design experience, including schematic capture through test and integration
- Hands-on prototyping and debug experience testing complex power systems, including various switch-mode topologies and linear regulators
- An advanced degree in Electrical Engineering
- Recent power supply design experience utilizing circuit-related tools including Cadence Concept, Allegro, LTSPICE and SpectraQuest
- Working experience with documentation, revision control and review systems similar to DOORS, ClearCase, and ClearQuest
21
Engineer Electronics Resume Examples & Samples
- Design, develop, test, operate, and maintain circuit card assemblies and firmware components to be applied to and integrated with engineering, scientific and manufacturing requirements
- Apply the appropriate Digital Engineering standards, processes, procedures and tools throughout the system development life cycle to support the generation of engineering products such as laboratory simulation and range
- Be majoring in Digital or Electrical Engineering
- Have an overall cumulative GPA of 3.00/4.0 or higher (unofficial academic transcripts must be provided at time of application by uploading the documents to your application or profile)
- Experience with schematic development tools
- Experience with Altera Quartus tools
- Experience with hardware test equipment such as O-Scopes, Spectrum Analyzers, and power meters
- Experience in working on business or engineering full life-cycle projects from project inception through launch
22
Engineer Electronics Resume Examples & Samples
- BSEE or BSET is required
- At least 5 years of experience (3 with a Master's degree), to include
- Working with NASA & Military performance documents required for the selection and screening of Space-level parts, including M38534(Hybrids), M38535 (microcircuits), M19500 (semiconductors), M123 (capacitors), M55342 (resistors), M39016 (relays), M981(magnetics) and various electrical interconnect systems
- Working with Destructive Physical analysis, Failure Analysis, physics of failure, Root Cause & Corrective Action, component specifications, component qualification & screening, and related installation/assembly process specifications
- Familiar with the selection and application electronic components in systems design
- Active SCI clearance
23
Senior R&D Engineer Electronics & Specialty Gases Resume Examples & Samples
- Lead development projects from concept to commercialization
- Conduct resource planning for development funding approval
- Plan and design experiments and conduct data analysis in support of proof of concept testing
- Drive and direct pilot scale development and customer evaluations
- Provide regular program updates and recommendations to senior executive management
- Maintain alignment with development partners, commercial team and customers through all stages of technology development
- Prepare invention disclosures and develop intellectual property for Praxair
- Work with Program Development Managers to identify opportunities for and initiate new R&D programs in the electronics and specialty gases market segment
24
Engineer Electronics Resume Examples & Samples
- 8 years experience in Weapons System Engineering in an aerospace environment, integrating weapons or payload systems with complex platforms
- Experience with Microsoft Office and technical writing, including proposals
- Excellent communication and people skills
- MS in Engineering plus 6 years of experience in Weapons Systems Engineering in an aerospace environment integrating weapons of payload systems with complex platforms
25
Engineer Electronics Resume Examples & Samples
- Bachelors degree in engineering or science or equivalent
- 5 Years of relevant experience (3 Years with Masters)
- Experience with network technology; examples include
- Cisco Certified Network Associate (CCNA) Certification
- Proficiency with Cisco routers and switches, Blue Coat packet shapers, and L-3 encryptors
- Experience with Navy networks, including Automated Digital Network System (ADNS)
- Experience with integrating networks in an unmanned aircraft system environment
- Interim security clearance or better
26
Engineer Electronics Resume Examples & Samples
- Perform detailed circuit analysis for analog, digital, electro-mechanical and RF assemblies
- Demonstrate proactive interface with cross-functional organization and Government counterparts to resolve issues
- Bachelor of Science in Electronics or Electrical Engineering and 5+ years of electrical hardware experience, 3+ years with a Master's degree, or 0 years with a PhD
- Design tool experience and proficiency (i.e. OrCad/Allegro)
27
Engineer Electronics Resume Examples & Samples
- Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline from an ABET accredited university
- Minimum of 8 years experience
- Must have Labview programming experience
- Preferred candidates must have excellent written and verbal communication skills, familiarity with Digital and Radio Frequency testing in a production environment
- Course work and relevant experience in Digital and Radio Frequency design theory and practical application
28
Engineer Electronics Resume Examples & Samples
- Working knowledge of RF test equipment
- Working knowledge of simulation tools such as ADS and HFSS
- Working knowledge of Microsoft Office Products (Excel, Word, Outlook)
29
Engineer Electronics Resume Examples & Samples
- Bachelor Degree in electrical engineering or comparable engineering discipline
- Master Degree in electrical engineering or comparable engineering discipline w/ 2+ years of engineering experience
- Experience with Mentor Graphics design and analysis tools (DxDesigner and Hyperlynx LineSim/BoardSim) or similar tools
- Familiarity with signal integrity and power integrity analysis
30
Engineer Electronics Resume Examples & Samples
- Design and test analog electronic circuits, and simulate analog or mixed-signal circuits to ensure that performance, noise, timing, and power requirements are all satisfied
- Generate and review development and design approaches for adequacy, feasibility, cost, and conformance to overall goals and best engineering practices
- Ensure assigned aerospace and/or ground support equipment meet project objectives and environmental conditions and are compatible with ground data acquisition and processing capabilities
- Write and review technical goals and approaches, while monitoring progress during development, design, and testing. Provide advanced technical assistance in development, design, and integration of technologies and systems
- Design, simulate and test advanced digital circuits; design Actel and Xilinx field programmable gate arrays (FPGAs) using very-high-speed integrated circuit (VHSIC) hardware description language (HDL)
- Generate and review development and design approaches; present results at project reviews and technical conferences
- Review and analyze existing system designs in order to initiate redesign or modifications to improve operational effectiveness or reparability of hardware; design or direct the development of unique or leading edge technology, hardware, equipment, or systems to meet specific mission requirements; manage engineering team efforts related to the study, development, and test of hardware, data system components, or equipment
- Experience with electrical board design (ALTIUM design software)
- Experience working with Electronics test equipment in a laboratory setting such as: Oscilloscope, benchtop power supplies
- Experience in writing embedded firmware for microcontrollers in C/C++ (digital)
31
Engineer Electronics Resume Examples & Samples
- 5 years experience with BS
- 3 years experience with MS
- Broad knowledge of computers and electronics
- Basic knowledge of military Communications Systems
- Mechanically Inclined
- Previous work with unmanned systems
- Experience with releasing engineering
- Systems Engineering Certificate or experience
- Test & Evaluation Experience
32
Engineer Electronics Resume Examples & Samples
- Master's Degree with an emphasis in electromagnetics
- Previous antenna design experience
- Proficient knowledge of simulation tools such as ADS and HFSS
- Ability to obtain and maintain a Top Secret security clearance
- 10+ years industry experience
- 12-15 years industry experience
- PhD with an emphasis in electromagnetics
- Extensive previous antenna design experience
- Expert with simulation tools such as ADS and HFSS
- Has a Top Secret security clearance
33
Engineer Electronics Resume Examples & Samples
- Bachelor’s Degree in an Engineering discipline
- 9 years of practical experience as a Network Architect or Network Systems Engineer in a complex multi-vendor, multi-protocol environment
- Must have in-depth knowledge of IP (TCP, UDP) Routing, Ethernet frames, Switch & Router configuration, QoS, VLAN provisioning & VPN
- Cisco CCNA equivalent or better
- Master’s Degree in an engineering discipline
- Experience with switch / router OS (e.g., Cisco IOS)
- CompTIA Security+ equivalent or better
- Working knowledge of BGP/MPLS
- Field experience with avionics and related systems, including 1553 bus architecture & FibreChannel
- Exposure to OMS-related technologies and paradigms
- Working knowledge of communication engineering theory
- Working knowledge in Systems Engineering
- Fluent in one or more object-oriented programming languages
- EVMS & Project Management
- TS clearance and Active SSBI with investigation date in last 5 years
34
Comms Engineer Electronics Resume Examples & Samples
- Perform subsystem analysis, document system requirements and interfaces, with traceability to platform requirements
- Perform/support review and analysis of supplier design data, definition of functional test requirements including acceptance, qualification, and system integration
- Perform/support design reviews, or reviews of design related documentation (ICDs, system and subsystem design documents, etc.)
- Perform field integration, trouble-shooting and repair of communications and data link systems
- Perform SIL and flight test planning and execution, both CONUS and OCONUS
- Perform change management and engineering change proposal (ECP) duties, including preparation, analysis, planning and execution
- Support development and management of integrated schedules, earned value, risk management, and status reports & briefings and other program communications
- BS in Engineering (Electrical, Computer Science or Aerospace)
- Minimum of 5 years related Communications System development experience
- U.S citizenship and an active DOD Secret security clearance are required
- Candidate must be proficient in Microsoft computer skills i.e. Excel, Power Point, and Word, Outlook and Visio
- Working knowledge of RS-422, MIL-STD-1553, and internet protocol (IP) based networks, development and test methodologies
- Working knowledge of US DoD Communication systems such as INMARSAT, Wide Band SATCOM, UHF SATCOM, UHF LOS, and/or Common Data Link (CDL), for supporting autonomous aircraft C2 and voice systems
- Candidate must have excellent verbal and written communication skills, with the ability to work confidently in a high-pressure environment, while interacting with all levels of staff from flight-line and field technicians to executive management
- Excellent leadership skills, be a self-starter, pay close attention to details, and have the ability to work effectively in a team-based environment
35
Engineer Electronics Resume Examples & Samples
- Developing engineering documentation for system configuration
- Executing engineering projects on schedule
- Collaborate with engineers to generate and redline documented procedures and troubleshoot
- US citizen with the ability to obtain a Top Secret clearance and the ability to be accessed to a Special Access Program is required
- Ability to develop and maintain Microsoft PowerShell scripts
- Ability to develop and maintain Microsoft Group Policies
- Ability to author and maintain technical installation, configuration, and update procedures
- Ability to document and maintain system configurations
- Ability to provide Engineering technical support for peer teams
- Ability to engineer and Test new technical solutions in lab environments
- Ability to design and implement VMware high-availability virtualized infrastructures
- Ability to maintain COTS Hardware and Software configuration matrix
- Ability to script deployments of Microsoft Windows Server and Workstation operating systems
- Ability to automate installation of COTS software
- Ability to engineer solutions to address new technical requirements and/or bug fixes
- Ability to implement engineering changes to the system as required
- Ability to maintain compatibility with existing architectures when implementing system enhancements
- Ability to release CM controlled documentation, scripts, and COTS software media
36
Development Engineer, Electronics Resume Examples & Samples
- Circuit board schematics and layout design
- Delivering designs, prototypes and documentation in time
- PCBA proto type testing and test specification creation
- Co-operation with other electronics designers, project team members, product analysis team and other interfaces such as Validation, Sourcing, Project office and Subcontractors
- An appropriate technical degree (B.Sc. or M.Sc.) within analog, digital or power electronics
- A few years of experience within product development
- Good knowledge of design tools such as PADS
- Experience of circuit simulation tools
- Experience of switch-mode power supplies is an asset
- A good command of English and at least basic command of Finnish
- AC drives knowledge is an asset
37
Weapons Engineer Electronics Resume Examples & Samples
- BS Degree in Engineering (Electrical, Mechanical, Aerospace) or related technical discipline (Computer Science, Physics, Mathematics)
- 14 years of practical experience working with weapons and payload systems
- Knowledge of governing weapon standards
- Knowledge of Stores Management and Bomb Rack Assemblies
- Active Secret clearance required to start w/the ability to obtain (in a timely manner) and maintain a Top Secret security clearance and access to Special Programs
- Greater than 14 years of experience
- Current Top Secret security clearance and Special Access
38
Engineer Electronics Resume Examples & Samples
- Bachelor's Degree in STEM (Science, Technology, Engineering, Math) plus 5 years engineering experience OR Master's Degree in STEM plus 3 years engineering experience
- DoD Secret security clearance with investigation in last 5 years required to start
- Current active DoD Top Secret, SAP, or SCI clearance
- Experience communicating technical and strategic details to high-profile Government clients in both verbal and written communications
- Experience with: C++, JAVA, Pearl, Python
- Experience with automated testing
- Experience working on aircraft development platforms
- Some experience with planning, scheduling or cost accounting methods
39
Engineer Electronics Resume Examples & Samples
- Support teams for new or re-design efforts: update drawings, coordinate with different functional teams
- Support production testing of deliverable SIGINT chassis
- Support EMI testing and EMI mitigation
- Attend/Support ERB/CCBs, review and approve documents and provide hardware support as needed
- Support of ad-hoc tasking providing HW support to SW development, create test procedure documentation and training packages, select and testing of replacement components due to DMS, support field questions and testing
- Evaluate system level tradeoffs and specification impacts of upgrades/design efforts and hardware replacements
- Perform chassis specification allocation to meet System Level Performance
- Review chassis, CCA, component, system test data
- Evaluate specification modifications vs. rework of hardware
- Bachelors or Masters Degree in a STEM discipline (Science, Technology, Engineering or Math)
- High degree of PC skills and software such as Word, Excel, Visio, Project, and other MS office products
- Experience in maintaining / reporting status of program activities while collaborating with employees within the department and across functions
- Good oral and excellent written communications skills
- Ability to work with little direct supervision, self-motivated, self-starting
- Knowledge of Earned Value Management System (EVMS) and CAM experience
- Familiarity with AS9100 and helpful
- Working knowledge of system sensor and sensor testing
- Experience testing for EMI and EMI mitigation
40
Engineer Electronics Resume Examples & Samples
- Bachelor of Science degree in a STEM (Science, Technology, Engineering or
- Experience designing, developing, testing electronic equipment and system
- Ability to obtain/maintain a Single Scope Background Investigation (SSBI)
- Excellent written and verbal communication skills, familiarity with Digital
41
Engineer Electronics Resume Examples & Samples
- BS Degree in Engineering (Electrical/Computer Science, Mechanical , Aerospace) or related technical discipline (Physics, Mathematics)
- 9 years of practical experience working with various airborne payload systems
- Active, in-scope Secret Clearance required to apply
- 7 years of practical experience working with various airborne payload systems
42
Engineer Electronics Resume Examples & Samples
- Provide onsite training for end-user personnel
- Maintain effective customer communications and relations interfacing daily
- Perform a variety of maintenance and technical support on electrical, electronic, and mechanical integrated systems and subsystems at a field location or forward deployed areas as necessary
- Install, upgrade, remove and document products ensuring coordinative engineering field changes
- Write, update, and maintain operator manuals, maintenance manuals, and technical documentation
- Bachelor's Degree in Electrical Engineering or other related STEM field and 9 years professional experience OR MS Degree in a STEM field and 7 years of professional experience
- This position requires physical ability to maneuver around equipment; verbal ability to clearly communicate with personnel; and manual dexterity sufficient to use hand tools, keyboards, and control panels
- Active Comp Tia Security+ certification
43
Senior Engineer, Electronics Resume Examples & Samples
- Advanced knowledge and application of the principles and theories of engineering design
- Advanced electrical and electronics design capabilities to quickly and accurately create prototypes meeting targeted performance
- Proficiency in OrCAD and/or other electonics design SW
- Experience in board level design with ARM Cortex micro-controllers
- Experience with board level design with ARM application processors exceeding 1 GHz clock
- Extensive experience with IO design including ADC, DAC, PWM, DC motor drivers, valve drivers, stepper and brushless motor drivers, etc
- Extensive experience with communication buses including CAN bus, SPI, differential SPI, I2C, RS232, RS485, etc
- Proficiency in Spice simulation
- Experience with PLD and FPGA design and programming
- Experience in board level design supporting CMOS and CCD sensors
- Experience with power management control and power supply solutions
- Proficient with design of mixed-signal electronics
- Strong knowledge and experience in design for regulatory requirements, CE and UL marking
- Strong knowledge and experience in design for manufacturing
- Strong communication, technical, and computer skills
- Creative engineering skills demonstrating coordination, tact and collaboration working in a team based environment
- Manual dexterity
- Minimum of a Bachelor’s degree in Electronics Engineering (Masters level preferred)
- 8+ years’ hands-on experience in design of processor and other electronics boards
- Experience working with a Research and Development team considered an asset
- Instrumentation design in life science or diagnostics or similar field would be an asset
