Inspection Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the inspection technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

S Pagac

Soledad

Pagac

10817 McDermott Point

San Francisco

+1 (555) 977 6948

10817 McDermott Point

San Francisco

Phone

p +1 (555) 977 6948

Experience Experience

Chicago, IL

Inspection Technician

Chicago, IL

Stehr-Goldner

Chicago, IL

Inspection Technician

Assist in the construction and/or revision inspection procedures, work instructions and checklists
Perform pre-inspection prior to inspector showing up (cancel inspections, if necessary to avoid re-inspection fees if you know we're possibly going to fail)
Assist in control of documents and records; conduct periodical document process audits
Manage and maintain all controlled documents and inspection records
Assist in other tasks as assigned by the superior
During down time: have your van stocked with material to pre-fab (disconnects, combiner panels, roof switches)
Calling inspectors in the mornings to confirm meeting times (Including which inspection is 1st., 2nd., 3rd., etc... so you know where to go in the order given to you by the inspector)

Houston, TX

Final Quality Inspection Technician

Houston, TX

Lebsack-Conroy

Houston, TX

Final Quality Inspection Technician

Makes suggestions to improve inspection efficiency and accuracy
Manage projects and special assignments from the Management team
Maintains an excellent attendance record in compliance with established manufacturing and quality attendance guidelines
Assist QCE’s and ME’s in product quality investigation and root cause analysis
Execute PPQ and V&V protocols
Execute IQ/OQ protocols for capitalized and loaner systems
Assist QCE’s in SAP data mining and reports preparation

present

Los Angeles, CA

Lead Inspection Technician

Los Angeles, CA

Kassulke, Goyette and Bogisich

present

Los Angeles, CA

Lead Inspection Technician

present

Directly supervise the Inspection Techs within the office, including performance management, time keeping, and career development
Submit daily report of the Quality Check(s) & Inspection(s) results to Support Team & Local Management
Ensure technicians perform pre-inspection prior to inspector arriving on-site
Actively communicate with corporate support team
Attentive to emails & promptly replying
Ensure technicians properly set up and tie off ladders for the city/county inspectors
Follow up with local city/county officials (inspectors) to review the current days schedule

Education Education

Bachelor’s Degree in Civil Engineering

Georgia State University

Bachelor’s Degree in Civil Engineering

Skills Skills

Strong interpersonal/human relations skills
Strong analytical and creative problem solving skills
Comfortable being and working on roofs
Microsoft operating system proficiency (recommended)
1+ to 2 years of experience
Individual should not have a fear of heights
Work well with others that are on your work team
A period of over four years is considered necessary to gain this experience

Create a Resume in Minutes

15 Inspection Technician resume templates

Read our complete resume writing guides

Corinth Reman / Reclaim Inspection Technician Resume Examples & Samples

Experience reading blue prints
Previous inspection experience
Experience using Microsoft Office applications such as Word and Excel

QC Inspection Technician Resume Examples & Samples

Maintain checklist of processes and protocols
Verify the quality of the product
Monitor process
Document inspections and tests
Identify any problems or issues with quality and make recommendations if needed
Responsible for performing laboratory support functions, which may include
BS. in a scientific discipline or equivalent with working experience in a pharmaceutical laboratory or R&D environment
Experience with quality control systems, pharmaceutical formulation development, and analytical testing is desired
Demonstrate potential for technical proficiency, collaboration with others, and conducting experimental studies independently
Experience with cGMP as they apply to laboratory practices, and good laboratory compliance, product manufacturing, and safety practices
At least 2 year’s experience with knowledge of quality control systems
Good visual inspection skills
Desire to learn new skills in the area of CMC
Ability to function efficiently and independently in a fast-paced, changing environment
Mastery of Microsoft Office

Non-destruction Inspection Technician Resume Examples & Samples

Determine test method, and prepare fluids and parts for nondestructive inspection
Interpret nondestructive inspection test results, and provide information about defects to repair center
Analyze wear metal content reports on engine lubricating oil and other fluids, and recommend corrective action
Establish radiation areas for radiographic operations
Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data
Perform nondestructive inspection on structures, components, and systems
Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment
Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors
Operate, maintain, and inspect nondestructive equipment
Perform operator maintenance and service inspections on shop equipment and tools
Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment
Perform silver recovery functions
Handle and dispose of hazardous waste and materials
Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document
Thoroughly familiar with the scope and limitations of the technique/method in which they are certified
Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified
Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer
Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III
Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards
Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components
Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems
Ability to provide technical support to structural/mechanical engineers and customers
Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule
Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification
Three (3) or more years’ experience as an aviation inspector and a minimum of one year experience on the assigned Mission Design Series (MDS) airframe
Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components

Alarm & Detection Inspection Technician Resume Examples & Samples

Perform inspection activities on electrical fire alarm systems
Supervise and inspect the installation of equipment to meet customer specifications
Minimum 2 years of experience within the Fire Protection industry
Completion of CFAA certification or applicable provincial certification
Ability to transport equipment and tools weighing up to 40lbs
Ability to work in confined spaces and adept at manoeuvring ladders, scaffolding and high lift equipment up to 40 feet
Demonstrates basic knowledge of electricity/electronics
Ability to read architectural and electrical drawings
Ability to effectively work well independently and approve inspection paperwork
Demonstrates an aptitude for troubleshooting systems and performing necessary repairs
Ability to identify and sell basic product enhancements to customers
Ability to demonstrate a high level of customer service
A valid motor vehicle license is required (Class G) with annual abstract to maintain eligibility

Alarm & Detection Inspection Technician Resume Examples & Samples

Complete inspection reports and other customer document requirements
Minimum 2 years of experience within the Fire Protection industry or SimplexGrinnell
Ability to work in confined spaces and adept at maneuvering ladders, scaffolding and high lift equipment up to 40 feet
Ability to adapt to changing customer needs
A valid motor vehicle license is required with annual abstract to maintain eligibility

Alarm & Detection Inspection Technician Resume Examples & Samples

Perform service & inspection activities on electrical fire alarm systems, access control and security systems
Manage service issues on-site to ensure fiscal requirements are met
Take part in 24hr on-call service rotation
Identify and sell basic product enhancements to customers
Effectively service panels all makes and models of fire alarm panels
Lead scheduled work and direct technician of a lower grade as needed
3 or more years of experience as Service Technician within the Fire Protection or related industry
Advance knowledge of Simplex product lines and demonstrated proficiency in Fire Alarm or Security or Nurse Call products
Demonstrated ability to train less knowledgeable technicians or customers
Ability to follow detailed procedures and ensure accuracy in documentation and routine details
Ability to present information through the spoken or written word, read and read and interprets complex information
Ability to lift equipment and tools up to 40lbs and climb ladders and scaffolding

Corinth Reman / Core Inspection Technician Resume Examples & Samples

CMISII (Core Management Information System II)
Location Management System (LMS)
Reman Cross Reference
Computer Data Entry Skills
Experience using Lotus notes
Core Acceptance Criteria (CAC)
Knowledge of CPS methodology (i.e. standard work, Andon, etc.) is beneficial
Previous Core Inspection experience

Inspection Technician Resume Examples & Samples

Attend daily correlation meetings
Reply promptly to emails and send when necessary
Set up and tie off ladders for the city/county inspectors
Rivet placards
Open electrical panels & junction boxes so the inspector can observe inside
Perform pre-inspection prior to inspector showing up (cancel inspections, if necessary to avoid re-inspection fees if you know we're possibly going to fail)
Calling inspectors in the mornings to confirm meeting times (Including which inspection is 1st., 2nd., 3rd., etc... so you know where to go in the order given to you by the inspector)
During down time: have your van stocked with material to pre-fab (disconnects, combiner panels, roof switches)
Comfortable being and working on roofs
Work well with others that are on your work team
1+ to 2 years of experience
Must possess current driver’s license and clean driving record
Individual should not have a fear of heights

Asset Inspection Technician Resume Examples & Samples

Undertaking detailed inspections on the road marking and reflective stud assets on Area 9
Assisting the Engineer, Road Markings and Studs, in ensuring that all the Highways England and Kier processes & procedures for Asset Development are followed. Ensuring compliance with the Kier ‘Integrated Management System’ (IMS) within own workload
Assist the Engineer, Road Markings and Studs, in the efficient working of the Team
Assisting in making site reviews of issues raised on HAIL and watchman enquiries
Meeting targeted deadlines and ensuring compliance with Quality and Environmental procedures
Actively promoting Health and Safety in the workplace, setting a good example to other employees and ensuring awareness of and compliance with general Health and Safety responsibilities as set out in the Health and Safety Management System
Performing other duties as may from time to time be reasonably required
HND, HNC or equivalent qualification or relevant construction experience in respect of highway maintenance in a design office or on site
Experience in a highways/construction environment
Ability to work independently with minimal supervision and take ownership for assigned tasks and duties
Capable of undertaking site inspections and able to provide a relevant demonstration of experience, expertise and competence for the tasks required
Experience in the use of, MS Word, MS Excel. Able to deliver good written reports and communicate orally. Good technical reporting and computer skills are essential
Capable of undertaking inspections within rough terrain in inclement weather on a motorway network environment
Have an appreciation/knowledge of relevant highway standards and documents including the ADMM, DMRB and MCHW
A current UK FULL valid driving license is essential for the role as site visits will be required
A knowledge of IAM-IS

Nde Level Ii Eddy Current Inspection Technician Resume Examples & Samples

Perform near surface inspections utilizing Eddy Current single coil and Array techniques
Perform near surface NDE inspections with visual, Dye Penetrant Inspection methods
Perform Thickness checks with Ultra Sonic methods
Interpret, evaluate, communicate and report findings to production & Engineering
Interpret and review engineering drawings as required
Support further research and development in to wider deployment of Eddy Current Array technology for operational improvement and optimization
NDT Level II certification in line with ASNT-TC-1A or NAS-410 guidance in Eddy Current
Knowledge of AMS, AWS / ASME, ASTM etc
Experience in inspecting a range of materials for different defect types
Knowledge and experience in the use of systems such as: Uni-west, Nortec, Stavely, Eddify, or equivalent
NDT Level II certification in line with ASNT - TC-1A guidance in Ultra Sonics (thickness) & Dye Penetrant
Experience in the use of basic Ultra Sonic Scopes: USM GO’s, EPOCH 600,
Knowledge of NASA 5009 standards
Basic understanding of lean principles: 5s, Kaizen, Continuous improvement initiatives

Nde Level Ii Penetrant Inspection Technician Resume Examples & Samples

Perform surface inspections with Dye Penetrant materials
Interpret and evaluate results on a range of different weldments, castings, forgings, and materials produced from different methods
Perform Visual Inspections
Support the development of NDE inspection techniques for complex geometries
Support research and development in to system qualification and certification for critical processes
Minimum 3 years of experience as a Level II Non-Destructive Technician
NDT Level II certification in line with ASNT TC-1A/NAS-410 guidance in Dye Penetrant and Visual Testing
Operational experience in the use of a range of facilities / tools including manual application, dip tanks, electro static
Experience in the use of florescent materials such as Method A and C
Experience in the inspection of advanced materials such as High Strength Aluminium Alloys, Precipitation hardened steels, Inconel Titanium & Maraging Steel (Super Alloys)
Experience in the interpretation of AMS, AWS / ASME, ASTM standards
Experience in inspecting products made via manufacturing processes such as: MIG, TIG, EB, Orbital Tube Welding, Friction Stir Welding and Laser welding
NAS 410 Level II certification in Dye Penetrant and Visual inspection
Radiation Safety trained
Problem Solving tools and techniques: Practical Problem Solving (PPS), 8D

Nde Level Ii Radiography Inspection Technician Resume Examples & Samples

Perform volumetric NDE inspections with advanced radiographic techniques : Traditional analogue, Computed and direct digital
Perform near surface NDE inspections with Dye Penetrant and Visual Inspection methods
Interpret and evaluate film / digital images
Optimization and manipulation of digital images for maximum clarity and accuracy in reaching conclusions
Communicate and report findings to production & Engineering
Minimum 2 years of experience as a Level II Non-Destructive Technician
NDE Level II certification in line with ASNT - TC-1A guidance in Radiography (RT)
Minimum 3 months of experience performing Digital Radiography
Radiation Safety trained and certified with IRRSP card
Computed or Direct Digital certification
Operational experience of utilizing digital radiography systems
NDE Level II certification in line with ASNT - TC-1A guidance in Dye Penetrant (PT) and Visual inspection (VT)
Certified Weld Inspector Status (CWI)
Knowledge of Carestream, Virtual Media Integration (VMI), or Yxlon Y. Image x500 evaluation software
Experience in the operation of Computed panels / scanners and Direct Digital Panels
Experience in the inspection of advanced materials such as High Strength Aluminum Alloys, Precipitation hardened steels, Inconel Titanium & Maraging Steel (Super Alloys)
Experience in inspecting products made via manufacturing processes such as: Fusion, OTW, Friction Stir and Electron Beam welding. Castings and forgings a bonus

Nde Level Ii Ultra Sonics Immersion Inspection Technician Resume Examples & Samples

Perform volumetric NDE inspections with Advanced Ultra Sonic Immersion Machines
Perform volumetric NDE inspections with Longitudinal Wave and Shearwave hand scan techniques
Assist in training and developing others within the team
Support research and development in to future Ultra Sonic technology development for operational improvement and optimization
Level II certification in line with NAS–410/ASNT–TC-1A guidance in Ultra Sonics with immersion specialty experience
Operational experience of utilizing immersion ultrasonic systems for the inspection of weldments
Knowledge of UTEX Inspectionware software or equivalent
Hands on experience using portable digital equipment such as Olympus EPOCH 600, USM GO scopes
Knowledge of AMS, AWS / ASME, ASTM’s
Basic computer skills: Microsoft applications – word, power point, excel

Lead Inspection Technician Resume Examples & Samples

Directly supervise the Inspection Techs within the office, including performance management, time keeping, and career development
Attend office daily correlation meeting(s)
Conduct daily meeting with inspection team(s)
Audit schedule(s) to ensure the calendar is up-to-date & accurate
Follow up with local city/county officials (inspectors) to review the current days schedule
Actively communicate with corporate support team
Actively track accounts from panel installation to Pre-PTO, and coordinate with Support Team to appropriately schedule
Attentive to emails & promptly replying
Ensure technicians properly set up and tie off ladders for the city/county inspectors
Ensure technicians open all necessary electrical panels and junction boxes for inspector to observe
Ensure technicians perform pre-inspection prior to inspector arriving on-site
Rivet placards/Add stickers to electrical equipment (if necessary)
Ensure technicians proactively take notes for corrections (and follow up with installation team to ensure prompt turn-around)
Proactively keep up with van stock and the necessary materials needed for a full-days’ work
Submit daily report of the Quality Check(s) & Inspection(s) results to Support Team & Local Management
Update local office spreadsheet on account progress
Strong interpersonal/human relations skills
Electrical apprentice card is preferred
Ability to work well with others that are on your work team
Must have a clean and valid driver's license, and be able to pass a drug test and background check
Microsoft operating system proficiency (recommended)

Shift Senior Inspection Technician Resume Examples & Samples

To verify product conformity to internal and external customer requirements
Support manufacturing through in-process inspection requirements
Support other inspection areas and related work as required
Review and interpret drawings, process sheets /routings, operating instructions, and specifications
Maintain accurate and complete daily inspection records
Maintain work areas and equipment in neat and orderly manner
Perform inspection utilizing various gages and measuring instruments following established plans to determine conformance to specifications
Process associated documents as required and specified
Perform all tasks as assigned accurately with attention to detail per drawings, specifications, or other operational instructions
Determine measurement techniques, processes, and equipment required to determine conformance to specifications
Train other associates in safety, quality, inspection, documentation, testing, etc… as required
Basic math & computer skills
Some lifting less than 30 pounds
Mostly sitting, sometimes moving or standing
Occasionally working in the machining areas with limited exposure to machining oils, mist, and coolants
Sitting at microscope for extended periods of time and use of tweezers handling small parts
High School Diploma or equivalent

Final Quality Inspection Technician Resume Examples & Samples

Ability to perform all Tech I responsibilities plus the following
Ability to apply working knowledge of Geometric Dimensioning and Tolerancing (GD&T)
Ability to create EEs
Performs First Article inspections on more complex parts
Conducts V&V inspections based on protocols
Proficient in all QAPs pertaining to AFQI inspections (e.g., Obturators, Cannulas, Endoscopes, Drapes, Seals, Stapler Reloads, etc)
Trainer/Expert in at least 4 QAP subject areas
Provides mentoring/training to new or less experienced technicians
Makes suggestions to improve inspection efficiency and accuracy
Willing to take on additional responsibilities as necessary
3-5 years related experience or training; or equivalent combination of education and experience
Demonstrates high level of accuracy in work performed
Ability to use advanced measuring tools such as DMM, optical comparator, MATLab and other custom equipment
Proficient in use of personal computers as part of daily work, including knowledge of the Microsoft Office suite , SAP and ACCS (Agile) system to retrieve and submit on-line documentation
Knowledge of Good Manufacturing Practices (GMP)

Non-destructive Inspection Technician Resume Examples & Samples

Performs the duties of an NDI Level II Examiner IAW NAS-410 and is certified for specific techniques in a given method of non-destructive inspections for aircraft, engines, and ground support equipment
Performs both on and off equipment maintenance
Performs certified tasks with minimum supervision
Performs non-destructive inspections of aircraft, engine components, and ground support equipment, using industrial radiographic, ultrasonic, eddy current, fluorescent penetrate, magnetic particle, and optical inspection techniques
Performs NDI testing, including that associated with TCTO related inspections, IAW applicable technical data
Notifies maintenance personnel regarding the extent and location of each defect detected during NDI activities and documents each defect on applicable forms
Uses Core Automated Maintenance System (CAMS) computers
Accomplishes process controls, and performs operator maintenance of assigned NDI equipment
Accomplishes joint oil analysis program inspections in support of the Department of Defense as a regional laboratory encompassing approximately 18 agencies and 560 different oil- wetted components
Ensures compliance with all applicable safety, housekeeping, tool control, and FOD prevention programs
Maintains Technical Orders and Composite Tool Kits
Assists in training and direction of assigned personnel
Must be able to work dayshift, night shift, and/or weekend shift as required
Shall perform other duties as may be assigned, to include TDY and travel
Performs other duties, as required
Shall have the skills and knowledge to perform specific tests, calibrations, and interpretations and evaluations for acceptance or rejection
A working knowledge of the types and locations of defects to be expected is required
Must be able to obtain and maintain a Secret security clearance and a Government flightline driver’s license
Graduation from the U.S. Air Force NDI School or equivalent is required
Must obtain a Repairman’s Certificate within 12 months of employment
One year of experience in oil analysis is required

Quality Warranty / Inspection Technician Resume Examples & Samples

Perform diagnosis of Warranty related products returned from the field. Responsibilities include, but not limited to: disassemble cylinder assemblies, evaluate and diagnose defective parts and cylinders, computerized tracking and documentation & report of daily progress
Work with Customer service and vendors to resolve Quality related issues in the field
Reintroduction of products returned from customers
Follow/Develop standard work instructions and other procedures as required
Perform troubleshooting and preventative maintenance on equipment as needed
Establish, conduct and maintain incoming inspection duties as needed
Support production by helping with diagnostics or other tasks as needed
Back-up to Teardown Technician: Performs any combination of tasks within the department to recover products that have been rejected due to any mechanical or cosmetic defects. Responsibilities include, but not limited to: disassemble cylinder assemblies, evaluate and diagnose defective parts, report daily production, record product by part and DP numbers that are returned to production, bead blast powder coat from arm assemblies, wire brush powder from pinions, use paint strip equipment as needed, use box crusher, maintain equipment and supplies in the recovery area
Drives forklift as needed to relocate materials
Maintains an organized workplace, performs general housekeeping duties within the department

Tire Inspection Technician Resume Examples & Samples

5 (8) hour shifts per week during the hours of 7am-9pm, including weekends and holidays
Ensure the overall safety and security of the employees, vehicles, lot and equipment
Check all 4 tires on every unit at the QTA that is being cleaned or dirty for tread depth and condition
Maintain a log of all units flagged for tire repair and turn in all administrative paperwork each shift to the proper administrative manager
Perform all other related work as required
Must be at least 18 years of age
High School Diploma or G.E.D required
Must have at least 6 months of related work experience
Must have a valid driver's license with no more than 2 moving violations and/or at-fault accidents on driving record within the past 3 years
No drug or alcohol related conviction on driving record in the past 5 years
Must be able to work outside in all weather conditions with moderate exposure to unusual elements such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises
Must be willing to accept a starting pay of $9.00/hour
Must be willing to work at the Orlando Airport
Apart from religious observation, must be available to work 5 (8) hour shifts per week during the hours of 7am-9pm, including weekends and holidays

Inspection Technician Resume Examples & Samples

Perform Quality Control examinations related to pressure boundary and structural component fabrication and installation
Perform In-Service Inspections on various plant systems and components in support of inspection programs
Perform surveillance of welding and heat-treatment activities
Prepare reports of inspections conducted
Care for and maintain inspection equipment
Level II certification to Canadian General Standards Board requirements in at least four of the following: radiography, ultrasonics, eddy current, magnetic particle, liquid penetrant
Knowledge of material science, industrial metallurgy, physics, chemistry, industrial methodology related to the field of non-destructive examination is required as well as familiarity with the ASME codes, and ASNT and CSA standards pertaining to the fabrication and repair of pressure boundary components
A knowledge of technical report writing to prepare clear concise reports, and knowledge of English to effectively communicate at all levels with personnel associated with inspection and maintenance is required
Successful completion of Grade XII in a Secondary, Commercial or Technical School plus at least two years of concentrated post-secondary education in appropriate subjects
Requires familiarity with large scale nuclear generating station layouts; station systems and equipment, and plant operating processes as well as knowledge of the relationships and interactions of the various sections of the departments involved in Bruce Power
Requires experience with station procedures and reporting systems
A period of over four years is considered necessary to gain this experience
Transferable skills (for example, effective communication, drive for accountability and results, time/organizational management, collaboration and teamwork)
Competency based interview

Final Quality Inspection Technician Resume Examples & Samples

Follows all applicable work instructions and perform simulated surgical procedures utilizing a surgical robotic system and accessories
Clear understanding of product non- conformances, quality notification (NCR’s, EE’s, VR’s) records origination and escalation process
Expertise in systems advanced troubleshooting, diagnostic skills and systems error log analysis
Assisting Quality and Manufacturing Engineering in product quality investigation and root cause analysis
Working knowledge of using iliad:5005 (Systems Error Log Data Base)
Follows all corporate, safety, production procedures and regulations
Working knowledge of SAP and Agile applications (ECO, Deviations)
Maintains an excellent attendance record in compliance with established manufacturing and quality attendance guidelines
Must be able to complete training and certification at one of the following area: Systems&Vision Final Quality Inspection
Education and/or Experience: High school diploma or equivalent; minimum two years of experience at Intuitive Surgical. Additionally knowledge of SAP transactions, QN origination and MatLab tool as well as a technician in good standing related to Manufacturing Attendance Guidelines and Quality performance is preferred
In addition, ISI courses should be completed in System Level Theory of Operations, System Configuration, Diagnostic Tools, and clinical operation of the system
Language Skills: Ability to read, write and understand English. Ability to read and comprehend complex instructions, correspondence, and memos. Ability to write correspondence. Ability to effectively present information in one-on-one and small group situations to other employees, supervisors, or engineers
Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute averages, ratios, and percentages and to draw and interpret bar graphs and line graphs. Ability to determine the minimum, maximum and nominal value when provided with a specification and a tolerance
Reasoning Ability: Ability to apply common sense understanding to carry out instructions. Ability to deal with situations including up to several variables. Ability to report actual or potential quality issues. Ability to suggest and implement process improvements
Computer skills: Proficient in use of personal computers as part of daily work, including knowledge of the Microsoft Office suite and SAP. Ability to use E-mail and the ACCS (Agile) system to retrieve and submit on-line documentation
Other skills and abilities: Ability to work varying shifts. Must have ability to complete training courses. Ability to work in a team environment. Ability to use clocks, timers, calipers, voltmeters, power supplies, rulers, and other test equipment as required. Meticulous attention to detail and orderly habits are required to accurately and completely document testing. Flexibility, willingness to learn new tasks, ability to take-on a variety of responsibilities big and small, and the need to fill-in for others when needed are highly preferred attributes for this position

Shift Inspection Technician Resume Examples & Samples

To verify product conformity to internal and external customer requirements
Support manufacturing through in-process inspection requirements
Support other inspection areas and related work as required
Review and interpret drawings, process sheets /routings, operating instructions, and specifications
Maintain accurate and complete daily inspection records
Maintain work areas and equipment in neat and orderly manner
Perform inspection utilizing various gages and measuring instruments following established plans to determine conformance to specifications
Process associated documents as required and specified
Perform all tasks as assigned accurately with attention to detail per drawings, specifications, or other operational instructions
Determine measurement techniques, processes, and equipment required to determine conformance to specifications
Train other associates in safety, quality, inspection, documentation, testing, etc… as required
Basic math & computer skills
Some lifting less than 30 pounds
Mostly sitting, sometimes moving or standing
Occasionally working in the machining areas with limited exposure to machining oils, mist, and coolants
Sitting at microscope for extended periods of time and use of tweezers handling small parts
High School diploma or equivalent

Bridge Inspection Technician Resume Examples & Samples

Principles and practices or Civil Engineering as applied to bridge inspection
Bridge types, components and material properties
National Bridge Inspection Standards (NBIS)
State and Federal Highway Administration (FHWA) requirements for bridge inspections and ability to perform computer operations using bridge related software applications
Latest Recording and Coding Guide for Structure Inventory and Appraisal of the Nation's Bridges
Latest Bridge Inspector's Training Manual
Making Judgements regarding bridge condition
Understanding and Interpreting departmental polices and procedures
Interpersonal relationships
Taking photos for documenting inspections
Perform as a leader
Gather and evaluate data
Lift/Carry 50 lbs. from floor to shoulder
Push Pull 50 lbs

Structures Inspection Technician Resume Examples & Samples

9 GCSE grade A-C including Science, English and Maths
Good communication skills and an enthusiastic attitude to work
A commitment to comply with Health and Safety at Work and meeting the needs of our Clients
Willingness to work towards accreditation for the Bridge Inspectors Scheme
A good understanding of standard computer software packages, MS Office
Experience of / qualifications in difficult access techniques such as roped or confined space access would be advantageous but is not essential as training in this area will be given if necessary

Inspection Technician Resume Examples & Samples

Perform inspection on physical, mechanical and/or electrical properties of received parts of subassemblies according to the defined criteria and collection plan
Accurately update and document the results of the inspections and testing
Manage and maintain all controlled documents and inspection records
Assist in the construction and/or revision inspection procedures, work instructions and checklists
Monitor and coordinate calibration of all measuring equipment, fixtures, critical operation equipment and instrumentation
Assist in control of documents and records; conduct periodical document process audits
Assist in other tasks as assigned by the superior

Final Quality Inspection Technician Resume Examples & Samples

Assist NPI Engineering during new systems platform introduction
Assist QCE’s in SAP data mining and reports preparation
Screen candidates for FQI positions
Manage projects and special assignments from the Management team
Conduct training for Systems and Vision FQI and maintain training records
Prepare quality reports and present data during engineering walkthrough
Initiate, lead and implement efficiency and process improvement projects
Coordinate with cross functional teams product flow prioritization
Execute IQ/OQ protocols for capitalized and loaner systems
Execute PPQ and V&V protocols
Assist QCE’s and ME’s in product quality investigation and root cause analysis
Redline QAP and other applicable work instructions