Ndt Technician Resume Samples
4.8
(114 votes) for
Ndt Technician Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the ndt technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
JR
J Reynolds
Jordane
Reynolds
59706 Douglas Mountains
New York
NY
+1 (555) 455 9485
59706 Douglas Mountains
New York
NY
Phone
p
+1 (555) 455 9485
Experience
Experience
San Francisco, CA
Ndt Technician
San Francisco, CA
Boyle LLC
San Francisco, CA
Ndt Technician
- Prepare reports outlining findings and conclusions
- Set up equipment to perform tests, and conducts tests on parts, following procedures established for specified tests performed
- Manufacturing/Operational Technical Support
- Performs nondestructive production techniques for facility (FPI and MPI)
- Sets up and standardizes equipment, processes parts, interprets and evaluates for acceptance or rejection, and documents results
- Provides the necessary guidance and/or supervisor to trainees and Level 1 personnel
- Provides technical assessments on new equipment and processes
New York, NY
Ndt Technician Level
New York, NY
Stark LLC
New York, NY
Ndt Technician Level
- Peruse work scope for each job to ensure familiarity with the work to be performed
- Assist other technicians
- Perform equipment setup and calibration to comply with industry and company standards
- Assist Level II in conducting tests in other NDT methods
- Travel and work on a call-out basis both domestic & international
- Perform Non-destructive examinations/tests to assess quality condition and/or identify defects
- Work in harsh environments
present
New York, NY
Lead NDT Technician
New York, NY
Waelchi-Conroy
present
New York, NY
Lead NDT Technician
present
- Perform Safe Work While on Client Sites
- Perform Level 2 UT/ Level 2 MT on Client Sites
- Submit reports and time sheets through Pipeline Report Manager (PRM)
- Inform Client should non-compliance be identified at the work site
- Leadership of Field Technicians assigned
- Produce quality and timely reports
- Facilitate/Lead Field Training
Education
Education
Bachelor’s Degree in Applied Science
Bachelor’s Degree in Applied Science
Northwestern University
Bachelor’s Degree in Applied Science
Skills
Skills
- Strong attention to detail
- Excellent analytical skills with the ability to make sound suggestions or recommendations
- Attention to detail and an ability to produce error-free products and accurately complete paperwork
- Good organizational skills and ability to work with minimal direction
- Able to follow directions and procedures
- Experience with Automated Through Transmission Systems strongly desired
- Experience with MAUS systems strongly desired
- Experience with multiple brands of flaw detectors strongly desired
- Excellent verbal, written and interpersonal communication skills
- Certification in other NDT methods (flash thermography) strongly desired
13 Ndt Technician resume templates
Read our complete resume writing guides
1
Ndt Technician Resume Examples & Samples
- Performs nondestructive production techniques for facility (FPI and MPI)
- Sets up and standardizes equipment, processes parts, interprets and evaluates for acceptance or rejection, and documents results
- Conducts system performance checks in accordance with the applicable process standards
- Provides the necessary guidance and/or supervisor to trainees and Level 1 personnel
- Provides technical assessments on new equipment and processes
- Acts as technical liaison to other departments such as Engineering, R&D, Quality and Customer Support for the purpose of process improvement and/or product liability issues
- Develops work instructions from the approved general procedures to be approved by a certified Level 3
- Assists with onsite audits and in formulating corrective action plans when any non-conformances are identified
- Monitors condition of equipment and resources in the NDT area for the purpose of maintenance and calibration
2
Ndt Technician Resume Examples & Samples
- Familiar with the scope and limitation of the method and shall have the ability to apply detailed techniques to products or parts within their limit of qualifications
- Cross train as required in other NDT methods as business needs dictate
- May be required to carry out tasks not specifically listed, within the scope and skill level of this position in support of department objectives and to develop one’s skills
- May be required to operate Furnace/Heat Treat functions as required
3
NDT Technician Level, Rt-dr / CR Resume Examples & Samples
- Operate Radiographic Testing equipment in accordance with applicable regulations, codes, practices, and procedures
- Use direct radiography and computerized radiography methods for Radiographic testing
- Reading and interpreting film
- Prepare, set-up and complete all necessary paperwork
- Conduct tests in other NDT methods
- Train and supervise Level I RT trainees and other NDT trainees
- Assist other technicians
- Use Direct radiography and computerized radiography methods
- Must have a minimum of 80 hours of documented RT training per SNT-TC-1A
- Experience with Computed and Digital Radiographic (CR/DR)
4
Ndt Technician Level Resume Examples & Samples
- Conduct tests with Ultrasonic Testing equipment for various components and materials
- Prepare, set-up and complete all necessary documents
- Interpret, evaluate, and document inspection results through formal report paperwork
- Set up and calibrate inspection equipment
- Responsible for training and supervising Level I UT trainees and other NDT trainees
- Must be able to travel and work on a call-out basis, both domestic and international
- Work in harsh environments
- Must have a minimum of 80 hours of documented UT training per SNT-TC-1A
- API QUTE qualification and/or AWS D1.1 UT experience a plus
- Surface method Level II certifications are preferred: PT, MT, and/or VT
- Must be able to pass Safe Gulf & HUET Water Survival training. Must possess or be able to obtain a TWIC card, valid Passport, Safe Gulf & HUET Water Survival
5
Ndt Technician Level Resume Examples & Samples
- Assist Level II Technicians in Radiographic Testing in accordance with applicable regulations, codes, practices, and procedures
- Load and process film
- Be trained to read and interpret film
- Learn to prepare, set-up and complete all necessary paperwork
- Assist Level II in conducting tests in other NDT methods
- Must be able to travel and work on a call-out basis both domestic & international
- Must possess a valid industrial radiographer certification card and proof of a 40-hour radiation safety course
6
Production NDT Technician Resume Examples & Samples
- Quality system update & documentation
- Continuous improvements
- Ability to setup & use NDT (UT) equipment’s
7
Level, NDT Technician Resume Examples & Samples
- Actively participate in Intertek/AIM and client safety programs
- Control the radiation area
- Interpret radiographs
- May perform specialized inspections
- Certified Level II RT
- Industrial Radiography Radiation Safety Personnel (IRRSP) or applicable agreement state card
- Adaptable to changing schedules
8
Assistant NDT Technician Resume Examples & Samples
- Help control the radiation area
- Help set up and utilize non-destructive testing equipment
- Help conduct radiographic tests to ensure quality or detect discontinuities (defects)
- Help apply testing criteria in accordance with applicable specifications or standards and evaluate results
- Help interpret radiographs
- Help organize and report test results
- Help fill out daily radiation reports
- May help perform specialized inspections
- Help perform other job related tasks as assigned by management
- Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections
- Willingness to travel
9
Ndt Technician Resume Examples & Samples
- Previous experience with braze and weld joints
- Basic understanding of non-destructive inspection techniques
- Basic Math Skills
- Ability to read, write, and speak fluently in English
10
NDI / NDT Technician Resume Examples & Samples
- Must be able to follow manufacturer's manual, tech data, and company procedures
- Must meet the minimum requirements per the NAS 410 to be considered as a Level II inspector
- At a minimum Eddy current, Ultrasonic, and Liquid Penetrant are required methods to qualify for this position
- Good communication and computer skills
- Must be able to travel in and outside of the United States, work all shifts, including weekends, and overtime when required
- Requires normal physical functions such as lifting, climbing ladders, etc
- Required to comply with all safety requirements and will need to access tight fit areas such as aircraft fuel tanks
- Must be able to work off of elevated platforms and on top of aircraft
- Must be able to and comfortable with entering aircraft fuel tanks
11
Ndt Technician Resume Examples & Samples
- Qualified candidates must have prior FPI working experience
- Prior inspection experience required
- Ability to interpret procedures, standards and work instructions are required
- Proficient in Microsoft Office required
- Clear understanding of lean manufacturing tools preferred
- * 2nd shift hours: 2:00 p.m. - 10:00 p.m
12
Ndt Technician Resume Examples & Samples
- Assists in the set up and calibration of equipment
- When necessary, assist in the operation and maintenance of radiographic equipment
- Load, process, read, and interpret film
- Responsible for operation of radiography in accordance with applicable regulations and procedures
- Adhere to all company policies and procedures, paying special attention to health and safety policies
- Entry level, 0-6 months experience
- Must possess a valid Louisiana, Texas, or Alabama industrial safety radiation card or have proof of a 40-hour radiation safety course
13
Ndt Technician Level Resume Examples & Samples
- Minimum two (2) years documented RT Level II experience
- Must be able to certify to ASNT-TC-A Level II
- Must have a minimum of 80 hours of documented RT training per ASNT-TC-1A
- Surface method Level II certifications are preferred: PT, MT and/or VT
- Experience with Computed and Digital Radiographic (CR/DR) experience
14
Ndt Technician Resume Examples & Samples
- Assisting in data collection
- Assisting with data analysis
- Assisting with preparation of reports
- 2 year Technical degree in related field
- Knowledge of NDT methods
- Knowledge of bridge construction
- Knowledge of pavement construction
- Experience in Materials Testing
- Knowledge & experience with roadway and bridge plans and specifications
15
Ndt Technician Resume Examples & Samples
- Follow industry standards for the complete an accurate examination
- CGSB Level II certification is required in various NDT methods (MT, PT, UT,RT, ET, and Visual)
- Certifications in API 510, API 570, CWB Level 2 and IRATA Rope Access would also be an asset
16
Senior NDT Technician Resume Examples & Samples
- Performs technical/ inspection functions pertaining to the aircraft component overhaul process
- Performs cleaning and inspection of aircraft components according to customers specifications, airworthiness directives, applicable manufacturers CMM guidelines and UTC operating procedures
- Performs non-nondestructive inspection (NDI) based on qualifications
- Maintains current knowledge of and complies with customer/Federal Aviation Administration (FAA)/Joint Aviation Administration (JAA) technical data as applicable to the work assigned
- Completes all required documentation in accordance with established procedures
- Engages and supports the organization's Continuous Improvement (ACE) activities
- Supports cross-training initiatives at the site
- Minimum two years mechanical experience and ability to attain required operating certifications
- Ability to read and write English, understand component maintenance manuals and all other applicable technical documents
- Must be able to write descriptive statements about noted conditions while performing inspections
- Requires the ability to evaluate his/her work and exercise judgment
17
Senior NDT Technician Resume Examples & Samples
- Minimum of five (5) years of mechanical experience with industrial equipment (pumps, motors, gearboxes, pulleys, etc.)
- Working knowledge and understanding of moving and rotating equipment such as pumps, motors, gearboxes, conveyors, etc. from an operations and maintenance perspective, mechanically and electrically
- Journeyman level ability to read, understand and apply information from technical manuals and other reference materials
- Effective written and verbal communication skills to satisfy training, safety, and electronic message transmission policies of the company
- Demonstrated computer skills in Windows environment with experience in MS Word, Excel, PowerPoint, and Outlook
- Possess Level I Certification or ability to obtain within one (1) year of hire date
- Work is performed in a 24 hour/day, 7 day/week, 365 day/year operation; this position requires a person who is willing and able to work weekends, holidays, rotating shifts and both scheduled and unscheduled overtime
- Freeport-McMoRan promotes a drug/alcohol free work environment through the use of mandatory pre-employment drug testing and on-going random drug testing
- Positions which Freeport-McMoRan has designated as safety sensitive positions in the applicable job or position description and which upon further review continue to be designated as safety-sensitive based on an individualized assessment of the actual duties performed by a specifically identified employee
18
Ndt Technician Resume Examples & Samples
- Ensure that the procedures and specifications are met prior to, during and after x-ray examination
- Non-destructive testing
- Conduct tests, interpret and evaluate for acceptance or rejection and document
- Provide necessary guidance and /or supervision to trainees, Level I and Level II techs in the technique in which they are certified
- Be familiar with codes, standards, and other contractual documents that control the method as utilized by the employer
- Develop written instructions for radiography from approved general procedures
- X-ray testing-exposure and interpretation of film
- Training of lesser experienced techs
- Preparation and approval of techniques and reports
- Calibration and maintenance of equipment
- Calibration monitoring
- Interface with engineering, production and customers
- 80 hours formal training to NAS 410 or ASNT as a Level III radiographer
- 1600 hours experience in radiography
- Ability to obtain a certificate in Hazardous Material/Waste and Transportation
- Ability to obtain a DOD security clearance is preferred
19
Ndt Technician Resume Examples & Samples
- Currently or previously certified to NDT Level II in UT and X-ray in accordance with NAS-410
- Two years manufacturing experience in nondestructive testing (Radiographic Testing Method)
- Must have documented hours for Training, and Experience per NAS-410 Radiographic Testing Level II
- Both film and non-film methods strongly desired, requiring: documented radiation safety training
- Ability to utilize measuring devices including comparators, micrometers, scales, and calipers
- Ability to read and interpret blueprint and engineering drawings and be able to document non-conformances as required
- Successfully pass vision screen and color blindness test
- Have excellent computer skills
- Must pass general, specific, and practical NDT exams within a reasonable amount of time
- History of working effectively with coworkers, managers, and other employees in a team environment
- As needed, available to work extended or flexible schedule on short notice
- Able to lift up to approximately 25 pounds; may occasionally lift 50 pounds (with assistance)
- Aerospace or aviation experience strongly desired
- Familiarity with AS9100, NADCAP, and other Quality / NDT auditing / accreditation systems strongly preferred
- Experience with digital/computed radiography (CR) strongly desired (familiarity with GE CR systems and software a plus)
- Experience with Automated Through Transmission Systems strongly desired
- Experience with MAUS systems strongly desired
- Experience with multiple brands of flaw detectors strongly desired
- Experience in the interpretation of flaws in composites desired
- Certification in other NDT methods (flash thermography) strongly desired
20
Ndt Technician Resume Examples & Samples
- Interpret and evaluate UT reports with respect to written criteria
- Report observations & recommend re-scan if necessary
- Approve or Reject UT reports as per standards
- Perform Hand & Machine UT scan on Blades
- Degree in Engineering or its equivalent
- 5 to 7 year experience in Manufacturing
- Minimum 3 years of work experience in NDT
- NDT UT Level III certified - ASNT
21
Non-destructive Test / NDT Technician Resume Examples & Samples
- A confident self-starter with sound decision making skills
- Must be thorough and accurate and maintain attention to detail in a fast paced environment
- Effective in data analysis, reporting, problem solving, judgment and decision making
- Champion for change, best practices and continuous improvement methods
22
Ndt Technician Resume Examples & Samples
- Learn to process casting, weldments, wrought products and composites and eventually after training sentence parts
- To operate X ray machine in accordance with techniques under supervision and eventually after training to sentence parts
- Visual inspection of parts
- Work on own initiatives and resolve any issues or problems to company specific procedures
- To ensure safe working to comply with H & S standards
- Assist in preparation for Customer visits, preparation of visit reports and prompt follow-up of resulting actions
- Adopting and deploying EATON LEAN systems using the prescribed ELSS tools
- Attend relevant reviews and meetings
- Ensure quality levels are maintained to Eaton standards
- Process control and variation reduction within processes
- Cost reduction initiatives
- Work with EATON toolbox
- Knowledge of NDT processes essential
- Sound knowledge of special processes preferred
- Experience of working in a similarly physically demanding environment
- Demonstrable ability / experience of working to procedures
- Training will be provided on all aspects of the role
- Demonstrate logical thinking
- Knowledge of inspection would be advantageous
- EN 4179 in relevant disciplines (Dye pen, X-ray etc) is advantageous
23
NDT Technician, nd Shift Resume Examples & Samples
- 1+ year experience in related field (Aerospace preferred)
- Previous experience with braze and weld joints preferred
- Basic understanding of detailed prints and specifications
- Moderate computer proficiency (e-mail, print documents, internet)
- Moderate proficiency with identifying, analyzing, and resolving problems
24
Assistant NDT Technician Resume Examples & Samples
- Assist technicians in set-up/tear-down of equipment; perform routine and preventive maintenance tasks, calibrations and overall equipment and facilities upkeep
- Learn and abide by company policies and procedures
- Must be able to communicate with clients, supervisor and co-workers
- Proven ability to adapt to an ever-changing schedule
25
Ndt Technician Level Resume Examples & Samples
- Assess the integrity and safety of equipment and make sound judgment with regards to the suitability of the equipment and it’s intended use
- Peruse work scope for each job to ensure familiarity with the work to be performed
- Assess personal qualifications to verify compliance with the work scope and client requirements
- Ensure the health, safety and welfare of all personnel by using systems and methods of work that are, so far as is reasonably practicable, safe and without risk to health or the environment;Advise the Inspection Services Manager or Inspection Engineer of inconsistencies between work practices and written documents
26
Ndt Technician Resume Examples & Samples
- Arrange and calibrate equipment and materials
- Perform Nondestructive and other tests and evaluations for acceptance or rejection determinations
- Conduct radiographic tests to find defects while maintaining and controlling radiation area
- Interpret welds made from various processes according to but not limited to ASME, ANSI, API and AWS codes
- Organize, evaluate and document radiation inspection results daily
- Assist, train and supervise Trainees and RT Assistants
- Ability to use Microsoft Office and Microsoft Outlook
- Target driven
- Project Management and organizational skills
- Technical skills or basic understanding in the related field
- Availability, flexibility and responsiveness
- Troubleshooter, problem solver
- Ability to synthesize information from a variety of sources into solutions
- Excellent analytical skills with the ability to make sound suggestions or recommendations
- Able to operate to the highest standards of ethics, in accordance with the SGS Statement of Integrity
27
Ndt Technician Resume Examples & Samples
- Set up and calibrate nondestructive testing equipment
- Apply testing criteria in accordance with applicable specifications or standards and evaluate results
- Perform specialized inspections
- May instruct and supervise others
- Perform other job related tasks as assigned by management
- Interface daily with the client about work priorities and progress of project
- Actively participate in client programs, planning and strategy sessions
- Work closely with client to identify and remove obstacles
- Actively participate in client safety initiatives, incident investigations and other safety events as required
- NDT Level II Certification Ultrasonic Testing and Magnetic Particle Testing
- Exceptional safety and quality awareness
- Team work mindset
- Able to follow directions and procedures
- Must possess a valid, unrestricted driver’s license
- The requirements listed above are representative of the knowledge, skill, and/or ability required
- This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company’s rights to assign or reassign duties and responsibilities to this job at any time
- SGS is an EOE AA M/F/Vet/Disability employer
28
Lead NDT Technician Resume Examples & Samples
- Perform Level 2 UT/ Level 2 MT on Client Sites
- Inform Client should non-compliance be identified at the work site
- Perform Safe Work While on Client Sites
- Produce quality and timely reports
- Be able to travel throughout the U.S. and possibly Canada
- Be a Point of Contact for Client
- Handle timesheet and expense reports
- Submit reports and time sheets through Pipeline Report Manager (PRM)
- Ensure all time sheets are signed and approved by client
- Ensure all tests are carried out in accordance with approved procedures
- UT Level II
- MT Level II
- Able to Learn Advanced Techniques: Laser, AUT, PAUT, LVII Shearwave, FAST
- Microsoft Office Skills
29
NDT / Technician Resume Examples & Samples
- NDT inspection of wheel and brake components, inspected to the Honeywell NDT Wheel and brake manuals
- Reading and Understanding of Work Instructions, Component Maintenance Manuals (C.M.M.), Operating Procedures and Customer Specification requirements
- Processing paperwork and parts control IAW C.M.M & Honeywell NDT Manuals
- Carryout daily checks within NDT cells Ensure all equipment is in calibration & functional
- Write new NDT techniques when required
- Maintain personal NDT hours required to sustain certification
- Carryout other tasks when required in Wheel/Brake cells
- Find ways to continuously improve processes within department
- Ideally have EN4179/NAS410 Aerospace or PCN within Ultrasonic Inspection (UT)
- Ideally have EN4179/NAS410 Aerospace in Eddy Current inspection (ET), Magnetic Particle inspection (MT) Fluorescent Penetrant inspection (PT)
- Be able to produce documented and certified previous OJT hours
- English and Math GCSE or equivalent with 3 or more years related field in a high production, fast-paced environment
- Ability to read and comprehend blueprints and technical publications to perform duties in compliance with customer requirements
- General knowledge and the ability to use precision measuring tools
- Knowledge and experience with personal computer systems
- Experience and knowledge of Lean Production and/or HOS desirable
30
Lead NDT Technician Resume Examples & Samples
- Must be legally eligible to work in Canada
- CGSB UT2 Certification
- CGSB MT2 Certification
- Must have 2+ years experience working on Pipeline Integrity Digs
- API 570 / 510
31
Ndt Technician Resume Examples & Samples
- Perform and Support NDT inspection methods including Magnetic Particle Inspection (MPI), Liquid Penetrant (PT) using manual and automated techniques
- Interpret NDT data to determine acceptability of parts in accordance with applicable specifications and document inspection results
- Handle and move non-explosive parts and components as required for NDT inspections
- Cross train in all NDT methods listed above if not already certified
- Train additional inspectors as required
- Perform other quality related tasks as assigned
32
Ndt Technician Resume Examples & Samples
- Actively participate in Intertek/Aim and Client safety programs
- Set up and utilize nondestructive testing equipment
- Conduct Radiographic tests to ensure quality or detect discontinuities (defects)
- Fill out daily radiation reports
- Technical background in NDT methods and procedures
- Ability to follow directions and procedures
33
Ndt Technician Resume Examples & Samples
- Performing and documenting MPI and FPI required tests
- Performing and interpreting liquid Penetrant tests (Water Washable and Post-Emulsifier, Hydrophilic), Perform Liquid Penetrant solvent removable dye test
- Performing wet and dry magnetic particle inspections for structural steel of all shapes and sizes, including welds
- Assuring all work is performed completely, correctly, and with the highest degree of quality
- Assuring all work is properly documented, whether accepted or rejected
- Setting up and calibrate equipment, interpret and evaluate results with respect to applicable standards and specifications
34
Ndt Technician Resume Examples & Samples
- 20% - Set up and operate conventional and Digital Radiographic (DR) inspection equipment, including Computed Tomography (CT), to inspect parts, materials, and assemblies to determine the existence and extent of discontinuities
- 30% - Use complex Software programs (efX-CT, efX-DR, imageJ®, VG StudioMax®) to evaluate digital images and CT data files
- 15% - Interpret both digital and film based radiographic images to determine location of subsurface and surface defects, such as inclusions, cracks, porosity, voids, unbonds, etc. Effectively communicate findings and relay information accurately through proper reporting processes and inspection reports
- 15% - Performs inspection operations in accordance with Quality Control Standards, written specifications, or verbal instructions. Participates as required in product/process auditing through hardware/data verification and Statistical Process Control (SPC) verification activities
- 10% - Completes all related documentation
- 10% - Maintains NDT Equipment
35
Ndt Technician Resume Examples & Samples
- Nondestructive Test Level 1S with responsibility for performing digital radiography and/or Fluorescent Penetrant on Cast Turbine Airfoils
- Provide training for potential Level 2 personnel performing FPM and/or DRM Inspections under guidance of a Level III
- Maintain FPM and/or DRM systems in accordance with required Pratt Whitney specifications
- Communicate issues requiring Level 3 guidance regarding inspection criteria interpretation and over inspections
- Exhibit skills and knowledge to set up and standardize equipment, conduct tests, interpret, and evaluate for acceptance or rejection, and document results in accordance with procedures approved
- Obtain level I and II certifications for Digital Radiography (DRM) and Fluorescent Penetrant (FPM) per NDTQ
- Provide training for potential Level II candidates under guidance of a Level III
- Successfully pass the Level II qualification/certification NDT examinations to NDTQ/NAS410
- Maintain FPM and DRM systems in accordance with required Pratt Whitney specifications
- “Hands on” inspection experience
- Proficient in Microsoft Office, SAP P10, and Solumina
36
Ndt Technician Resume Examples & Samples
- Certifies product that is in conformance with customer specifications and maintains traceability to such certification as is applicable
- Creates NDT techniques. Performs penetrant, X-ray, and magnetic particle inspections and interprets results
- Performs preventative maintenance and calibrations on NDT equipment
- Operates vapor degreaser and performs the necessary process checks
- Properly processes, sorts, and verifies X-ray film
- Performs etch, passivation and electropolish (Steel Process only) as needed
- Grinds and finishes welds
- Sandblasts parts as needed
- Communicates closely with engineers on scrap, rework and process issues
- Maintains lot integrity
- Ensures paperwork is properly done
- Helps other areas as needed
- May be required to take hazardous waste training
37
Ndt Technician Resume Examples & Samples
- Conduct radiographic tests to ensure quality or detect discontinuities (defects)
- Apply testing criteria in accordance with applicable specifications or standards, and evaluate results
- Standing, walking, sitting, lifting, carrying, pushing, pulling, reaching, handling, fingering, feeling, talking, hearing, visual acuity, accommodation and color vision, and communication
- Moving, carrying, and lifting objects in excess of 75 lbs
- Climbing and working off of ladders, stairs, and scaffolding in excess of 100 ft
- Working extended hours and standing for extended periods of time
- Working in indoor and outdoor environments in conditions of extreme heat and cold
- Working in and near industrial hazards
38
Ndt Technician Resume Examples & Samples
- Establishing and maintaining accurate data of NDT database
- Executing NDT related routine and non-routine tasks
- Creating in house routine and non-routine NDT inspections reports
- Identifying and recommending any improvement in HME welding and NDT inspection practices
- Correlating with analysis results to determine potential failure mode
- A trade qualification
- Level 2 Ultrasonic testing and Level 2 magnetic particle testing
- Experience in Non-Destructive Testing; weld inspection
- Sound knowledge of Australian, Safety and Statutory regulations and standards
- Predictive fault analysis and machinery health diagnosis skills
- A strong background in a Mechanical or Electrical maintenance of Heavy Mobile Equipment, preferably in the mining industry
39
Ndt Technician Resume Examples & Samples
- Maintains and updates factory level NDT qualification and certification programs
- Maintains/creates all NDT program processes, written instructions and procedures
- Maintains all necessary training for the site NDT Technicians
- As needed, perform audits with outside agencies to ensure the requirements of the written practices are met
- In addition to the above activities, must be capable of the responsibilities listed below
- High school or equivalent; technical training required listed below
- 80 hours formal training to NAS 410 or ASNT
- NDT Level II certification in RT. Certifiable to Level III per the requirements (NAS 410 and SNT-TC-1A), i.e., 4 years as a Level 2 is required to qualify for Level 3 certification unless the following conditions are met “A 2 year degree in engineering or science study at a technical school, college or university reduces the above to 2 years’ experience. A 3-4 year science or engineering undergraduate degree reduces the above to 1 year experience
40
Rope Access NDT Technician Resume Examples & Samples
- Demonstrated ability to effectively perform assigned NDT and Rope Access takes
- Knowledge of NDT equipment
- Effective written communication skills / Technical report writing
- Adopt standard safe work practices and procedures in accordance with HSE policies and industry standards
- Willingness to train in different inspection methods
- Collaboration - Fosters open dialogue with all project parties, solicits feedback from others
- Accountability - Takes personal responsibility and ownership, fulfills commitments and holds other accountable
- Analyze Issues and Solve Problems - Gather the most important information; analyze and incorporate, and apply new informaton and concepts; recognize symptoms that indicate problems; and make sound and timely decisions
- Communicate effectively - Express ideas clearly and consisely; listen carefully and attentively to others' opinions and ideas; share information and viewpoints openly and directly with others
- Minimum 5 years relevant experience as a field inspection technician within the oil and gas industry
- Level 2 CGSB or equivalent certification in MT and PT, Level 1 UT and Rope Access certification
- Level 2 RT and/or UT would be an asset
- CWB and/or API certification would be an asset
- Phased Array, TOFD or other advanced UT training/certification would be an asset
- EVITA, LEEA or other Lifting Equipment training/certification would be an asset
- Must be able to travel offshore and complete mandatory safety training and meet qualifications required for work offshore
- Proficient use of Microsoft Office
41
Ndt Technician Resume Examples & Samples
- Contribute to the NDT method expansion within the Employer organisation pertaining specifically to UT, Phased Array and UT Time of Flight Diffraction
- Must be willing to transfer skill & knowledge to client employees
- Complete English proficiency
- Worked on 100MW to 1000MW coal fired power plant components (GEC, MAN & ABB)]
- Training of technicians in general and on job, in any of the approved methods as per NDT approval
- Blind-trial performance for client and Independent Qualification Authority (IQA)
- Confirm completion of qualification process
- When required by the employer, provide the Employer with inspection, reporting, analysis and recommendations on the operational components during planned and unplanned inspections of power generation equipment
- Liaison and discussion with customer engineering staff on all technical matters relating to the work performed, when required by the Employer
- Identify client requirements as contained in the Inspection Qualification Objective
- Resolve operational technical issues from any of the Eskom and Non-Eskom Power Stations as assigned by the employer
- Adhere to the Employer’s NDT services written practice
- Conceptualise and document inspection design
- Guide the simulation process (CIVA)
- Develop inspection procedure
- Apply and demonstrate performance of the inspection procedure (Open trials)
- Certified Level 3 UT, Phased Array
- Certified TOFD
- Diploma Mechanical or equivalent
- Must be capable of working with a diverse team
42
Feild NDT Technician Resume Examples & Samples
- Have an excellent knowledge of current Australian Standards, API Specifications and Petroleum Regulations
- Demonstrate a commitment to safety and contribute to an injury free environment through compliance with company policy and procedures
- Review and Maintenance of company policies, procedures and SOP’s for all applicable equipment
- Represent and support the company’s corporate value, vision and strategic goals
- Actively participate in the development of new initiates
- Have strong interpersonal skills and the ability to provide support and guidance to field personnel
- Strong mechanical knowledge and ability to disassemble oilfield equipment ready for inspection
- Previous experience with MEX maintenance software a benefit but not essential
- MT2 (AINDT)
- UT1 (AINDT)
- License to perform Dogging or rigging with Working at heights
- Medium Rigid License
- ET2 (AINDT) and/or UT2 (AINDT)
- CSWIP Welding inspection or equivalent
- AICIP in Service Inspector
- PRV & Guage Calibration experience
- Hydrostatic Pressure Experience
- Sandblasting Experience
43
Advanced NDT Technician Resume Examples & Samples
- Post secondary certificate in a related discipline, or a combination of relevant education and experience; Minimum 7 years of relevant experience as a field inspection technician
- Level II certification in UT discipline of Non Destructive Testing in accordance with CAN/CGSB-48.9712-2014 or equivalent standard
- Additional training and ISO 9712 certification in Advanced UT methods such as PAUT and TOFD
- Ability to interpret and make decisions on methods and techniques to be utilized for inspection work; Aware of latest developments in advanced NDT technologies
- Must be able to travel offshore on periodic visits, as required; Must complete mandatory safety training and meet qualifications required for work offshore
- IRATA Rope Access Certification is considered an asset
- Analyze Issues and Solve Problems – Gather the most important information; analyze, incorporate, and apply new information and concepts; recognize symptoms that indicate problems; make sound and timely decisions
- Planning and Organizing – Sets clearly defined objectives; manages time effectively; plans activities and projects well in advance and takes account of possible changing circumstances
- Delivering Results – Sets high standards for quality and quantity; consistently achieves set goals
- Adapting and Responding to Change – Adapts to changing circumstances; accepts new ideas and change initiatives
- Relating and Networking – Establishes good relationships with clients and co-workers; relate well to people at all levels
- Working with People – Demonstrates an interest in and understanding of others; listens, consults with others and communicates proactively; develops and openly communicates self-insight
44
Ndt Technician Resume Examples & Samples
- The NDT Technician will perform varied testing on forged, welded and machined parts to ensure compliance with technical drawings in accordance with approved procedures, specifications or standards in force and evaluate results
- Perform ultrasonic and eddy current testing, and analyze x-ray film, of a wide variety of complex structural members, safety of flight items, both critical and non critical, to detect internal defects
- Evaluate data and characterize all anomalies utilizing alternate non-destructive testing (NDT) methods and record all non-conformances,
- Effectively operate all equipment for which certifications are held
- Check equipment for proper functioning and report malfunction to leadman, supervisor or Maintenance
- Keep own work area clean and orderly
- Execute visual and dimensional inspection of aerospace parts
- Complete non-destructive testing and issue certificates of compliance and nonconforming material tags
- Develop and implement procedures for non-destructive testing
- Calibrate test equipment
- Read and interpret technical drawings
- Set up equipment to perform tests, and conducts tests on parts, following procedures established for specified tests performed
- Evaluate test results against designated standards, utilizing knowledge of metals and testing experience
- Prepare reports outlining findings and conclusions