Turbine Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the turbine engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

T Walter

Theodora

Walter

3855 Vladimir Landing

Philadelphia

+1 (555) 427 5277

3855 Vladimir Landing

Philadelphia

Phone

p +1 (555) 427 5277

Experience Experience

Philadelphia, PA

Steam Turbine Performance Engineer

Philadelphia, PA

Halvorson Inc

Philadelphia, PA

Steam Turbine Performance Engineer

Support review or preparation of performance test procedures and attend performance acceptance tests
Technical supports to customer interfaces, e.g. application engineers, requisition engineers, and project manager, etc
Customer technical clarification support, etc
HBDs and correction curves, etc., and inputs to plant engineering or customer client
Turboset thermodynamics calculation and analysis, and inputs to blading & turbine modules design
Technical correctness of contractual thermal design and documentation by following GE processes and design criteria
Preliminary steam flow path and blading design calculation and analysis, and inputs to blading & turbine modules design

Los Angeles, CA

Wind Turbine Field Service Engineer

Los Angeles, CA

Nolan, Lehner and Erdman

Los Angeles, CA

Wind Turbine Field Service Engineer

Team player, cooperative, interested in further development
Coordination of external and internal service providers and contractors on site
Maintenance and control of LOTO safe systems of work
Structured worker with technical analytical abilities
Perform, instruct and ensure safety standards are maintained during service activities
Documentation of call-out responses, fault finding and repair work in service reports, logbooks and checklists
Prepare, issue and control Permit to work HV switching systems and documentation

present

Phoenix, AZ

Wind Turbine Gearbox & Drives Engineer

Phoenix, AZ

Mayer, Rau and Fritsch

present

Phoenix, AZ

Wind Turbine Gearbox & Drives Engineer

present

Create and revise drawings, specifications and design practices applying GE and industry processes and standards
Identifies inefficiencies in the design process and drives solutions to improve quality and productivity
Responsible for design, development and testing of Gearbox & Drives components for wind turbines
Identify and execute cost saving ideas and strategies
Perform mechanical analysis using finite element methods
Support manufacturing, sourcing and the field with issue resolution and quick corrective actions for design related causes
Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures

Education Education

Bachelor’s Degree in Engineering

University of Illinois at Chicago

Bachelor’s Degree in Engineering

Skills Skills

Strong desire, ability, and adaptability to learn and solve difficult technical challenges through innovation, dedication, and cooperation with a global team
Ability and desire to learn and adapt quickly
You are result-oriented, structured, and capable of keeping perspective in a project-structured organization
Project Management Professional (PMP certification)
You possess strong communication skills, both verbal and written in English
Strong interpersonal skills and cultural awareness
You thrive on completion of projects and delivery of results to the end customer
You are self-driven, inventive, proactive, and outgoing
Possess a positive, fun, motivated, determined, and friendly attitude
Prior experience in the wind power industry, specifically on wind turbine blade design and/or manufacturing

Create a Resume in Minutes

14 Turbine Engineer resume templates

Read our complete resume writing guides

Wind Turbine Aerodynamics & Acoustics Engineer f Resume Examples & Samples

Bachelor's Degree in Mechanical or Aerospace Engineering or equivalent knowledge/experience
Demonstrated knowledge of fluid dynamics, aerodynamics, or acoustics
Master's or PHD degree in Mechanical or Aerospace Engineering
Experience with experimental methods for acoustic, fluid dynamic, and aerodynamic measurements
Experience in related aeroacoustic theory such as trailing edge noise, boundary layer noise, fan noise, or turbomachinery noise
Experience in blade element momentum design theory, boundary layer methods analysis, CFD meshing, and post-processing

Steam Turbine Service Engineer Resume Examples & Samples

Provide technical dispositions to resolve emergent issues during steam turbine outages, commissioning and planning
Interface with customers in office meetings and on site to effectively represent MHPSA by demonstrating technical expertise and customer sensitivity in order to achieve a high level of customer satisfaction
Utilize an understanding of steam turbine component design, auxiliary system design and turbine operation to troubleshoot service issues while applying MHPS-approved practices and procedures
Define and manage time effectively to provide timely responses based on outage and commissioning needs while also attending to personal technical growth opportunities
Ensure fleet experience, operational feedback, and lessons learned are communicated back to design engineering to ensure continuous improvement
Provide support for emergency critical path activities outside of none core hours
Background with gas turbine and steam turbine design
Strong design plus field service experience on steam turbines is required
BS degree in engineering from an accredited college or university. Will consider substantial, related experience in lieu of BS degree in engineering

Lead Engineer Wind Turbine Loads Simulations Resume Examples & Samples

Development of wind turbine system models and simulation environment for dynamic behavior, loads & performance simulations like
Master or Bachelor of Science degree in engineering discipline or equivalent
Proven expertise in the simulation tools like FLEX5 or BLADED
Knowledge in certification guidelines such as IEC61400- 1 or DiBt 2012
Expertise in Matlab/Simulink
Detailed wind turbine systems knowledge
Basic knowledge on codes and standards for wind turbine certification in general
Familiarity with a variety of engineering areas

Steam Turbine Performance Engineer Resume Examples & Samples

Bachelor’s Degree in Mechanical Engineering or related discipline
Minimum of 3 years of steam turbine maintenance experience with stationary and rotating components
Understanding of steam turbine thermodynamics
Highly energized self-starter who can work independently
Master’s Degree in Mechanical Engineering or related discipline
Training or proficiency in steam turbine design and/or thermodynamics
Fluency in the English language
Proficient in the use of GE thermal modeling tools (i.e. GateCycle, THB (Thermal Heat Balance), Stage by Stage)
Familiarity with the latest steam turbine repair techniques on both stationary and rotating components
Strong computer skills with extensive knowledge of Microsoft Excel
Greenbelt Certified or equivalent quality certification
Excellent oral and written communication skills to convey technical concepts to business leaders and customers
Strong organizational, analytical, and problem solving abilities
Desire for continual improvement and skills development
Desire to bring forward creative new ideas to help shape future growth opportunities

Looking for Senior Steam Turbine Engineer Other OEM Resume Examples & Samples

Bachelor’s Degree in Mechanical Engineering or any other related engineering degree from an accredited university or college with minimum of 10 years of professional experience valuable for the position
Minimum of 10 years of experience in repair engineering, field engineering, product service, power generation product engineering or related functions within the power generation industry
Proven experience in Siemens, Westinghouse and/or Mitsubishi Steam Turbine technology
Effective written and oral communication skills in English and Spanish
Must be able to maintain a normal day-to-day fluid conversation on any topic with few mistakes (mistakes that will not affect getting the message through). Must have fluency and rhythm and sufficient self-confidence in the language to be able to handle meetings and conversations
MSc Degree in Turbomachinery or Mechanical engineering from accredited university
Wide experience in Siemens, Westinghouse, Toshiba, Hitachi and Mitsubishi Steam Turbine Technology
Domain expertise in power services and equipment for Non-GE Steam Turbine, and Steam Cycle

Turbine Engineer Resume Examples & Samples

Must have experience in large rotating machinery and/or turbo machinery design
Requires excellent written and verbal communication skills and the ability to work in an interactive group environment
A Bachelor's Degree in Mechanical Engineering with a minimum of 5 (five) years experience is required
Must be a US citizen with the ability to obtain a DOD secret security clearance
Experience with steam turbine and component design

Wind Turbine Blade R&D Engineer Resume Examples & Samples

Masters or PhD degree in Aerospace Engineering, Mechanical Engineering, Material Science Engineering, Chemical Engineering, or similar
General understanding of and experience with wind turbine aerodynamics, acoustics, and loading conditions of wind turbine blades
Strong interpersonal skills and cultural awareness
Strong desire, ability, and adaptability to learn and solve difficult technical challenges through innovation, dedication, and cooperation with a global team
You are result-oriented, structured, and capable of keeping perspective in a project-structured organization
You are self-driven, inventive, proactive, and outgoing
Ability and desire to learn and adapt quickly
You thrive on completion of projects and delivery of results to the end customer
You possess strong communication skills, both verbal and written in English
Possess a positive, fun, motivated, determined, and friendly attitude
Prior experience in the wind power industry, specifically on wind turbine blade design and/or manufacturing
Project Management Professional (PMP certification)
“Out-of-the-box” creative approach towards solving problems
Multiple language skills are an asset, but not a requirement

Wind Turbine Service Engineer Resume Examples & Samples

Qualified/certified electrical engineer/ technician or equivalent knowledge and experience
Ability to work to tight deadlines whilst continuing to follow safety/quality guidelines
Ability to work as part of a team and/or on own initiative
Ability and confidence to work at height (includes physical fitness to climb)
Equipment: Operate both light and heavy equipment
Ability and willingness to travel domestically and internationally as required
Valid/clean driving license (EU class B)
English fluency, particularly with technical explanations
Unrestricted EU work permit
Bachelor's degree/state certified engineering degree in Electrical Engineering is preferred or equivalent knowledge and experience
Some years' experience in similar role (field service etc.)
Good knowledge of enterprise processes and tools
Good MS Power Point, Excel, Word skills and general PC skills

Engineer Turbine Aerodynamics Resume Examples & Samples

Aerodynamic design and testing (scale and full scale)
Consideration of engine system level issues
Coordinating aerodynamics design with hardware owners
Participating in problem solving initiatives
Identifying improvements in processes and tools
Advancing the state of the art of aerodynamic technology
Supporting design best practices
Participate in organizational efforts in assigned projects and/or tasks
Master’s degree in Mechanical Engineering, Aerospace Engineering, or related discipline with significant and relevant experience in the following technical areas
Aerodynamic design – Detailed understanding of the physics and principles associated with gas turbine high and low pressure turbine aerodynamic design, ranging from overall component characterization to detailed understanding of stage and blade aerodynamic physics; expertise with computational fluid dynamics (CFD) based modeling as well as empirical based aerodynamic modeling techniques
Test – Component and full-scale testing experience - test planning, instrumentation, test conduct, data analysis
Technology - Demonstrated ability to advance the state of the art with technologies and design features leading to improved component performance; strong connections to relevant professional societies, and recognition through publications and patents
Excellent communication and influencing skills with the ability to communicate at a variety of levels, from detailed design reviews to high-level leadership reviews
EU permit
PhD in Mechanical Engineering, Aerospace Engineering, or related discipline
Passion for technical excellence and technology advancement
Able to self-manage workload across a number of designs
Self–directed and motivated
Work successfully in team environment
Demonstrated leadership in advancing the state of the art in his technical specialty

Wind Turbine Gearbox & Drives Engineer Resume Examples & Samples

Responsible for design, development and testing of Gearbox & Drives components for wind turbines
Drive lessons learned, best practices and standardization into drawings, specifications, and design practices
Identifies inefficiencies in the design process and drives solutions to improve quality and productivity
Implementation of corrective actions in field issues on gearboxes
Minimum 3 years of engineering experience or equivalent
Turbomachinery gear application and bearing design experience
Master’s Degree in Mechanical Engineering or similar
Proven project, program leadership experience

Wind Turbine Engineer Resume Examples & Samples

Remote analysis and diagnosis of processes performed on wind turbines
Planning of resources necessary to execute the work based on provided technical documentation
Approval of technical work being performed on wind turbines
Cooperation with technical support department in Denmark
Cooperation with other Vestas departments on global level
Resolving issues based on existing systems and corporate database
Master's Degree in: electrical engineering, power engineering, automation, mechanics, mechanical engineering and similar
Ability to work accordingly to certain procedures
Ability to work with technical documentation
Cat. B driving license
Knowledge of German, Spanish, Portuguese, French or Danish will be an advantage

Wind Turbine Engineer Resume Examples & Samples

You'll lead the turbine selection for wind farms
Advise on the selection of other equipment to successfully deliver projects and O&M strategies
Modelling of turbine systems and technical system integration
You'll help to grow the New Energies portfolio in offshore wind
Liaise with the Shell Energy Systems Integration (ESI) team to help evaluate the deployment of innovation

Lead Engineer Wind Turbine Loads Simulations Resume Examples & Samples

Proven expertise in the simulation tools like FLEX5
Experiences in additional simulations tools such as BLADED
Knowledge in certification guidelines such as IEC61400-1 or DiBt 2012
Strong written, oral, & presentation skills
GB certified (GE Internal only)
Ability to work effectively in a global matrix environment
Proven record of innovative and differentiated technology development and applied design

Senior Combustion Turbine Engineer Resume Examples & Samples

Provides combustion turbine engineering support to Generation internal (Corporate) and external (Generating Station) Managers
Improves equipment and systems operating reliability and efficiency through consultation with operating representatives, contractors, equipment manufacturers and the application of engineering principles
Provides betterment project cost estimates, risk versus economic analysis in order to optimize generation resources
Assists with generation resource planning and budgeting
Ensures all compliance aspects of position are known and followed
Understands and complies with all policies, codes and regulations applicable to position and company
Complies with all Generation Department operating and safety procedures
Prepares budgets and spending requirements for preventative maintenance and reliability/efficiency improvements of generation equipment
Provides standards and procedures to improve operating reliability and efficiency of generation equipment
Maintains generating equipment fleet records including past preventative maintenance, repairs, issues found and improvements
Provides technical support and contractor management for generation equipment during maintenance outages
Acts as a mentor to entry level engineers

Turbine Engineer Resume Examples & Samples

Comprehensive knowledge
Seasoned professional with advanced applied turbine engineering experience
Applies advanced skills contributing to knowledge areas within function, but not yet an expert in all
Makes recommendations on moderately complex issues regarding project components and tasks
Serves as project/technical lead on small to medium sized projects; may coordinate work of professionals, technicians and others outside of own department
Resource integrator –builds professional networks and identifies and connects resources to achieve goals. Regularly contributes actionable ideas in brainstorming and planning sessions

Turbine Specialist / Machinery Engineer Resume Examples & Samples

Provide guidance and technical recommendation for the proper planning and detail preparation of TG major and minor outage events. (30%)
Provide field support to facility management for outage oversight and technical decision making. (50%)
Provide technical guidance and advise facility management for unscheduled TG repairs and issues. (10%
Assist in TG performance testing and optimization. (5%)
Maintain clear and regular communication with facility personnel. (5%)
Formal technical training like GE field engineer school or comparable
Training in turbine control systems and experience in troubleshooting control related issues
Thorough understanding of mechanical, hydraulic, pneumatic and electrical systems
Training/Experience in Root Cause Failure analysis and methods used to determine component failure mechanisms
Knowledge of steam plant operations and steam condition controls
High proficiency in MS Office, especially with Excel (spreadsheets, modeling, and pivot tables), Outlook, and Access
Ability to communicate effectively and easily with management/ employees at different levels of the organization in office or remotely
Minimum of 10- 15 years of relevant experience in Steam Turbine – Generator major overhaul, shop repair methodology, field supervision of millwrights and machinists
Job requires physical demands consistent with work in industrial environment
Majority of work will be accomplished by traveling to facilities to accomplish assigned tasks and supporting scheduled overhauls and unscheduled TG downtime/ problems

Turbine Engineer Resume Examples & Samples

This position may be located in Cedar Rapids, IA, or Madison, WI
This position may be filled at a higher level
Alliant Energy will not provide sponsorship for an employment visa (e.g. H-1B visa) now or in the future for this position
In this challenging role you will plan, direct, and implement large steam turbine, combustion turbine and generator outage maintenance and engineering projects in a safe and environmentally conscious manner
This position will help develop and lead gas turbine maintenance strategies
This team is responsible for the following: planning, scheduling, conducting major overhauls; planning and conducting large repetitive maintenance tasks; providing outage resource management; providing craft labor management and supervision; managing alliances
Perform field inspections, field measurements and equipment walk downs, focusing on assessing Gas & Steam Turbines and associated equipment
Recommend changes in procedures, equipment, or materials as necessary to maintain and improve turbine performance, reduce O&M costs, and increase reliability
A four year degree from a college or university, within an engineering program that is accredited through the Engineering Accreditation Commission is required
A minimum of five years technical and/or professional experience
Knowledge of the operation, maintenance and repair of generators, steam turbines or combustion turbines
Knowledge of the IGT component management, repair, metallurgical mechanical and NDT assessment including failure of IGT components
Project management skills, working knowledge of the electric and steam generation industry and any experience with power plant operations would be a plus
Note: All Candidates selected for employment with Alliant Energy will be required to successfully complete a drug screen and background check

Wind Turbine Blade Engineer Resume Examples & Samples

Create Level II (Process Flow) and Level III (Work Instruction) documents
Work with Quality Department to combine quality plan with Level III documents
Specify and direct engineering calculations and testing for designing blade, nose-cone, nacelle, and other composite coatings (fairing, painting, etc.), tooling, fixtures, and other materials or equipment that may be utilized for performing repairs
Understand blade loads and apply to blade designs for service repairs
Reverse engineer damaged wind blades as necessary to formulate repair processes, analyze feasibility and ensure proper repair
Perform Finite Element Analysis to ensure proper repair for complex repair processes
Build, manage and maintain a library of lamination schedules, materials used in manufacturing, and repair processes of common wind blades in industry
Quarterly review of all Work Instructions and Quality Plans as part of the company’s continual improvement process
Understand the requirements of the customer (internal/external) and quality work scope
Create an inspection plan to monitor and evaluate suspect blades as well as a random sampling of blades repaired
Produce inspection reports and repair completion reports and provide relevant quantifiable data to the customer
Extrapolate to estimate the condition of all the blades in the fleet
Work with customer to develop a quality service plan going forward
Perform managerial functions, such as preparing proposals, budgets, labor costs and report writing
Analyze product failure data and document root cause analysis for all blade failures to determine causes of problems and develop solutions
Process flow documents for blade repairs and evaluate technical specifications relating to repair design objectives
Produce Engineering Reports as needed and review all new repair designs – make recommendation for material selection based on design objective, strength, weight, heat resistance, electrical conductivity and cost
Monitor material performance and evaluate material deterioration
Conduct or supervise tests on raw materials or finished repairs to ensure their quality
Advance Non-Destructive Evaluation (NDE) capabilities
Oversee the work of Blade Repair Technicians to ensure repairs are to specifications
Ability to travel domestically up to 15% of the time, if required
Develop new blade services that compnay may offer to existing and new customers
Conduct analysis to determine reasons for failures of materials, parts or processes
Participate in proactive team efforts to achieve departmental and company goals
Bachelor’s degree in a materials or composites field of engineering and two (2) to five (5) years demonstrated Wind Turbine experience with composite blade engineering is required
Must have a strong knowledge of a Finite Element Analysis program to analyze composite performances
Experience with ISO procedures and OSHA safety requirements would be an asset
Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables
Knowledge of computer-aided design, database, project management, spreadsheet and word processing software, electronic mail, graphics, technical diagrams, flow charts, etc
Ability to work effectively with executive, management, and staff level employees with varying educational, professional, and cultural background using verbal and written communication
Must speak, read, write and understand English. Japanese is a highly desirable for this position

Steam Turbine Performance Engineer Resume Examples & Samples

Thermodynamic engineer
3 years minimum experience in steam turbine thermodynamic calculation
Experience with Thermodynamic tools once worked and office software
Good knowledge of English both written and oral
Understanding of turbine cycle thermodynamics and interfacing power plant components
Thermodynamics design principles
Turboset system knowledge
Performance Test knowledge (ASME PTC6)
Confident personality with demonstrable ability to expedite and negotiate
Strong written and verbal communication skills are preferred
The candidate must be numerate and have demonstrable analytical skills
Open and resilient
Team player and cooperative
Results oriented and solution focused

Wind Turbine Field Service Engineer Resume Examples & Samples

Ability to work independently on the implementation of fault analyses and repair of wind turbine generator systems in Ireland, including clarification of any client queries
Planned and preventive maintenance of wind turbine generator systems
Documentation of call-out responses, fault finding and repair work in service reports, logbooks and checklists
Coordination of external and internal service providers and contractors on site
Contact person for client technical queries, such as retrofits and repairs
Professional training in electrical engineering sector (electrician, power electronics system, mechatronic engineer)
Familiar with MS-Office operating system
Familiar with PLCs
High degree of quality awareness; excellent fault finding and diagnostic skills combined with the ability to detect and remedy faults, defects, problems
Team player, cooperative, interested in further development
Able to work at heights
Structured worker with technical analytical abilities
High degree of flexibility, highly motivated with the ability to work under pressure
Electrical/ mechanical service or maintenance experience will be the additional advantage

Aeroderivative Turbine Engineer Resume Examples & Samples

Oversight of field service work on Aeroderivative Gas turbines that will involve compressors, and hot section maintenance on installed turbines, turbine change-outs, borescope inspection, and other activities to support the BUs
Advise BUs during maintenance planning stages, interface with service providers/OEM's, create/follow standardized approach that can be leveraged across Chevron
Author, revise, review and approve LM aero turbine engineering authorization documents directing incorporation of modifications, improvements, repairs, alterations and disposition of aero engine troubleshooting
Develop LM aero engine and associated component Overhaul and Repair Specifications directing specific Level I, II and IV engine maintenance actions, modifications and repairs based on specific hardware failure investigations and detailed cost and reliability analysis
Develop LM aero engine and component acceptance testing protocols for engines and components returning from vendor overhaul or repair maintenance to the Chevron fleet
Direct Chevron LM aero engine depot level hardware reclamation efforts, and assist Chevron BU’s with OEM repair and overhaul vendor warranty claims
Conduct LM aero engine hardware and component repair development in the absence of OEM repair documentation
Develop, implement and continually monitor reliability and efficiency improvement campaigns including specific engine core wash programs
Interface with repair shops and advise BUs on recommended work scope to include Service Bulletins, parts repair/replace, repair procedures, modifications and upgrades
Provide troubleshooting guidance and manage technical requests from the Business Units
Investigate engine technical issues and lead troubleshooting efforts. Support these efforts at the site when required
Lead a multi-functional team to perform root cause analyses (RCA)
Provide technical feedback to OEMs and other Chevron BUs based on specific site experience and lessons learned
Be willing to cross train/expand knowledge base to include frame gas turbines and other power generation
Ability and willingness to travel up to 30% of the time as required
Engineering Degree and 10 years’ experience with Aeroderivative Gas Turbines/Jet Engines. Minimum of 15 years’ industry experience required without Engineering Degree
Required experience with
The candidate must be able to work effectively on multidiscipline\multinational teams. Ability to distribute and implement best practices across the enterprise
The preferred candidate will have been considered a “go-to” person in their past work history, and is ready to share their specific knowledge and experience throughout Chevron. The preferred candidate must be considered a subject matter expert in the preferred areas of experience described above. Ability to analyze and implement equipment upgrades to include the development and analysis for CAPEX projects supporting facility business objectives

Turbine Engineer Resume Examples & Samples

Bachelor’s Degree in Engineering or 10 years directly-related work experience will be considered in lieu of a four year engineering degree
Minimum five (5) or more years of experience working closely with the maintenance planning and execution of gas turbines, including combustion, hot gas path and major inspection execution. Understanding of Maintenance Philosophy to include strategic and tactical maintenance planning, inspection methods, field execution quality management, inspection oversight/execution, critical component parts tracking, standard maintenance procedure reviews, Predictive Maintenance program reviews, and Condition Based Maintenance Programs
Prior operations, maintenance, engineering, or technician experience with compressor drive, cogen, combined cycle, or simple cycle large frame gas turbines is required
The position requires the ability to use and comprehend trending and predictive maintenance computer programs
Extensive experience with General Electric Frame 5, 6, 7 and 9 gas turbines with min 5 years OEM Field Service Experience
Strong interpersonal, leadership and communication skills. Ability to effectively communicate clearly in writing and verbally. Ability to interface with others and effectively function as a member and/or leader of a team
OEM Gas Turbine Field Service or Engineering Service experience is highly desirable. Experience with GE Frame 5, 6, 7 and/or 9 turbines is preferred but not required (other OEMs are considered). Experience with Nuovo Pignone compressors is also desired
Preferred candidate will have advanced turbine engineering experience. Experience with OSI PI Process Book and Data Link as well as advanced Excel functions are preferred
Experience working in Refinery, Petrochem, Power Generation and LNG facilities

Engineer, Single Stage Turbine Resume Examples & Samples

Must possess fundamental knowledge of thermodynamics and understanding of standard engineering principles
Ability and willingness to travel both nationally and internationally – 1 to 2 times per year average
Strong analytical skills and ability to perform mechanical and thermodynamic calculations
Practical understanding of turbomachinery components such as bearings, gas seals, and oil seals
Experience with shop floor inspections and troubleshooting
Good understanding of materials and manufacturing techniques
Extensive skills with Microsoft products and use of Oracle
Provide technical data and support for new unit single stage turbine contracts and aftermarket orders
Create and check manufacturing bills of material for new unit single stage turbines from order records
Create and check internal and customer documents
Create and check Major Buy Out specification drawings, review supplier drawings and documentation
Consult frequently with project manager, drafting, and packaging engineer and occasionally with client
Review, create and check document revisions as directed by change orders, engineering alterations, mark-ups or ECR’s
Act as liaison with shop, other internal customers and outside suppliers
Disposition nonconformance’s and material deviations

Wind Turbine Field Service Engineer Resume Examples & Samples

Servicing wind turbine equipment and ensuring it operates within specification
Troubleshooting and repairing electrical & mechanical system malfunctions and faults
Fulfill the role of a Senior Authorized person onsite
Prepare, issue and control Permit to work HV switching systems and documentation
Prepare and check high voltage switching schedules / operations
Carry out High voltage switching and Isolations
Collaborate and interface with the grid operator during switching operations (Telemess)
Implement and control HV safety rues onsite
Maintenance and control of LOTO safe systems of work
Perform, instruct and ensure safety standards are maintained during service activities
Collaborate with engineering departments and other internal functions
Maintain and follow safety and quality procedures as required by company policy
Keep records, maintain service documentation and report as required by company policy
Maintain service center with necessary tools, materials and equipment for service operations
Ensure periodic maintenance, repairs and calibrations are made to equipment/tooling & PPE
Qualified & Certified electrician / technician or equivalent knowledge and experience
Certified SAP/AP with previous HV switching /Isolation experience or equivalent
Experience in the maintenance of HV Plant and equipment
Good knowledge of measurement, control systems and PLC technology
Strong ability to read, follow and understand electrical schematics
Good knowledge and ability to use electrical measurement equipment and instruments
Competent with MS-Office, Oracle applications and service reporting systems
Familiarity with SCADA systems
Ability to work at height
Capable of working at remote sites and offshore conditions
English fluency, particularly with use of technical terminology
Ability to work as part of a team and on own initiative
Structured method of working and analytical abilities
Motivated person with can do attitude
Ability and willingness to travel domestically as required

Senior Turbine Aerodymanics Engineer Resume Examples & Samples

Actively apply his or her engineering skills as an integral team member
Work effectively in a stimulating team environment and manage challenging tasks
Be highly engaged and flexible to support new priorities
Propose, promote, then act on his or her own initiatives and ideas
10 years experience of Gas Turbine Design including lead experience
Flowpath endwall contouring
Highly 3D airfoil shapes
Non-symmetical airfoils shaping
Must possess good understanding of physics principles

Wind Turbine Frame & Accessories Engineer Resume Examples & Samples

Responsible for design, development and testing of Frame and Accessories for wind turbines
Perform mechanical analysis using finite element methods
Implementation of corrective actions in field issues on Frame and Accessories
Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures
Bachelor Degree in Mechanical Engineering or similar
Minimum 6 years of engineering experience or equivalent
Wind Frame and Accessories design experience
Experience with 3D-CAD tools (NX/Unigraphics preferred)