Communications Systems Engineer Resume Samples

4.8 (130 votes) for Communications Systems Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the communications systems engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Resume Builder
CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

Create a Resume in Minutes
ZO
Z O'Conner
Zander
O'Conner
18243 Sanford Heights
Dallas
TX
+1 (555) 338 1469
18243 Sanford Heights
Dallas
TX
Phone
p +1 (555) 338 1469
Experience Experience
New York, NY
Communications Systems Engineer
New York, NY
Brown-Fay
New York, NY
Communications Systems Engineer
  • Performing system-level CONOPS development, functional analysis and decomposition
  • Developing space communication system architecture simulations
  • Provide technical expertise to the SC Roadmap, Investment Strategy, Strategic Plans, and Enterprise Strategy efforts
  • Defining and developing satellite communications system and payload architectures
  • Develop analysis tools using MATLAB and object-oriented software platforms
  • Definition and building communication simulation platforms using Matlab/C++ for algorithms proof of concept, performance analysis, floating & fixed point design, parameters optimization etc
  • Define communication architecture, sub-modules functionality and specifications covering areas like equalization, echo cancellation, timing recovery, error correcting codes, PLLs etc
Philadelphia, PA
Unified Communications Systems Engineer
Philadelphia, PA
Doyle-Boyle
Philadelphia, PA
Unified Communications Systems Engineer
  • Device management including Internet Protocol (IP) phones, analog adaptors supporting fax machines or other analog equipment
  • Network traffic monitoring and testing
  • VR call flow scripting and management , automatic call distribution (ACD) management, and business application integration
  • Cisco UCM system administration and maintenance activities and tasks with the responsibility for evaluation and architecture of all aspects of Unified communication. This includes Standard SIP based IP voice
  • Management of user accounts, voice mail, call queues, primary rate interfaces (PRI), fax lines, and office mailboxes
  • System-wide management, maintenance, and improvements
  • Develop and maintain documentation of all processes associated with administration of the communications and system networks and duties performed by network & system administrators
present
Dallas, TX
Senior IT & Communications Systems Engineer
Dallas, TX
Rice Group
present
Dallas, TX
Senior IT & Communications Systems Engineer
present
  • Writing of reports, specifications
  • Systems integration consultancy
  • Post contract services including in some cases commissioning
  • A sound knowledge of engineering fundamentals as they relate to building systems and site servicing
  • Preparation of drawings detailing the systems designed
  • Design of IT and communication systems including: structured cabling, wired and wireless voice and data networks, healthcare systems, airport systems, CCTV, Access Control and general applications of technology to the built environment. Work closely with inter-disciplinary technical leaders and ITC leaders from other Arup offices
  • System design calculations
Education Education
Bachelor’s Degree in Engineering
Bachelor’s Degree in Engineering
The University of Kansas
Bachelor’s Degree in Engineering
Skills Skills
  • High knowledge of digital communications, RF system analysis, FEC coding, and communications engineering
  • In depth understanding of communication systems such as phase modulation, spread spectrum, signal detection, signal and interference analysis, baseband filtering, data formatting etc
  • Knowledge of regulatory approval process, radio frequency compatibility and interference assessment
  • Ability to collaborate with other engineers and non-technical leaders/ stakeholders to rapidly develop C4I solutions to SOF tactical communications challenges
  • Significant tactical communications experience and knowledge, specifically radio frequency (RF) communications and SATCOM
  • Strong technical background in systems engineering and system analysis
  • Understanding of MS Office applications (including Visio), knowledge of Missile Defense, DoD communications systems and MDIOC operations
  • Ability to rigorously research problem and solution spaces and summarize findings both written and orally
  • Benefits Tuition Reimbursement
  • 401(k)
Create a Resume in Minutes

15 Communications Systems Engineer resume templates

1

Satellite Communications Systems Engineer Resume Examples & Samples

  • 5+ years of experience with communications
  • Experience with design and implementation of software for cellular communications devices or for software-defined radios
  • Experience with encryption techniques for commercial communications software or military cryptographic techniques
  • Experience with Microsoft Office for the workplace
  • Knowledge of cell phone or radio terminal design
  • Ability to be a team player with energy to be proactive in a fast-paced environment and adapt to changing requirements
  • Experience with DoD acquisition
  • Experience in working with ACAT 1 level programs
  • Experience with testing communications software and software-defined radios
  • Experience with communicating technical software design and test functions and tradeoffs to non-software managers
  • Knowledge of the Software Communications Architecture (SCA)
  • BA or BS degree in Science or Engineering
2

Communications Systems Engineer, Senior Resume Examples & Samples

  • 7+ years of experience with the design or integration of DoD communications architectures, systems, and networks
  • 5+ years of experience with satellite communications or IP networking
  • Knowledge of DoD satellite terminal systems, including hub, VSAT, and IP modems
  • Knowledge of SATCOM Gateway, including STEP, Teleport, and DoD Gateway architecture and capability to satisfy disparate client requirements
  • Experience with DoD systems acquisition processes and documents
  • Experience with SATCOM and Gateway networks, including DISN-TE
  • Experience in a military communications field
  • Experience with military satellite communications, including DSCS, WGS, GBS, VSATs, and the SAR process
  • Knowledge of the Joint environment
  • Knowledge of the DISN, DODIN, NIPRNet, SIPRNet, coalition networks, and the GAR process
  • BS degree in Engineering, CS, Mathematics, or a related field preferred; MA or MS degree a plus
3

UAV Communications Systems Engineer Resume Examples & Samples

  • Participate in multi-disciplinary design teams to support UAV communications subsystems engineering activities, evaluations of UAV design and architecture concepts, identification and assessment of technical risk
  • Establish detailed requirements for the full system to individual components, perform link analysis, and risk analysis for the UAV service link. Receive and interpret RFI/RFPs to break down requirements into architectural concepts
  • Collaborate with Antenna, RF, IF, baseband, structures, power and other and avionics subsystems to create competitive, winning communication architectural solutions
  • Define the UAV service link requirements and perform architecture trades
  • Define implementation requirements for the antenna, RF front end, IF and baseband processing and networking subsystem and components for the UAV service link
  • Develop RFP/RFI and lead proposal evaluation and contract technical monitoring efforts
  • Perform analysis/design in support of the development effort
4

Satellite Communications Systems Engineer Resume Examples & Samples

  • Participate in multi-disciplinary design teams to support satellite communications subsystem engineering, evaluations of spacecraft design and architecture concepts, identification and assessment of technical risk of spacecraft concepts
  • An ability to work independently and collaboratively and to deliver a high-quality work product in a fact-paced environment
  • Establish detailed requirements for the satellite system to individual components, perform link analysis, and risk analysis. Receive and interpret RFI/RFPs to break down requirements into architectural concepts
  • Collaborate with Antenna, RF, Structures, Power, Ground Segment and other satellite network subsystems to create competitive, winning communication architectural solutions
  • Demonstrate understanding of launch vehicle discipline areas such as propulsion, structures, etc
  • Demonstrate knowledge of Satellite Communications (SATCOM) systems and SATCOM testing activities
  • Provide advanced analysis on various types of antenna components and antenna systems
  • System level requirements development and analysis for mechanical, hardware, and software requirement specifications for SatCom products
  • Demonstrate understanding of launch range and ground system interfaces, integration and test activities, and verification processes
5

Communications Systems Engineer Resume Examples & Samples

  • Defining and developing satellite communications system and payload architectures
  • Supporting space communication architecture trade studies
  • Lead analysis activities for space communication systems, including: link analysis, signal distortion, system capacity, reliability, and performance
  • Relevant experience in various aspects leading the design and implementation of a communications system or subsystem, requiremments development, system or payload architecture design and analysis, hardware or software design and development, integration, test, operations)
  • Good understanding of analog and digital communication theory and systems, RF/microwave design and theory, digital
  • Proficiency in Matlab, C++, or other objective oriented programming
  • Experience with GIS applications and analysis
  • Strong interest in data visualization and analysis
6

Communications Systems Engineer Resume Examples & Samples

  • Present analysis methodologies and results to diverse audiences of both technical and business stakeholders
  • Relevant experience in various aspects of designing and implementing a communications system or subsystem (requirements development, system or payload architecture design and analysis, hardware or software design and development, integration, test, operations)
  • Good understanding of analog and digital communication theory and systems, RF/microwave design and theory, digital signal processing (DSP), electromagnetics, waveform design, optical or networked communications, and antenna theory
  • Proficiency in Matlab, C++, or other objective oriented programming,
7

Communications Systems Engineer Resume Examples & Samples

  • 3+ years of experience with engineering in a professional or academic environment
  • Experience with Microsoft Excel, PowerPoint, and Word
  • Experience with the space, C4ISR, and Cybersecurity domains
  • Experience with the DoD acquisition system
  • Experience with software programming using C++, Java, Python, MATLAB, VBA, or other similar tools
8

Unified Communications Systems Engineer With TS Resume Examples & Samples

  • Work daily within Remedy ticketing system to provide support for voice; video and/or data communication issues
  • 2-5 years of directly related experience in network administration and support
  • 2-5 years of directly related experience in systems engineering and administration 2. Knowledge of the principles; methods; and techniques used in Unified Communications and system design 3. Knowledge of Cisco Unified Communications operating systems; Cisco Video solutions; VCS; TMS and Virtual Telepresence Server 4. May require professional certification in one or more specific technologies; depending on job assignment. 5. Attention to detail; strong organizational skills and a forward thinking approach is a must
9

Communications Systems Engineer Resume Examples & Samples

  • Support the architecture, trades, link budgets and analysis for new communications technologies employing flexible payloads
  • Support the design of new RF and Communications subsystems - from components to boxes
  • Develop models and tools for system trades - link budgets, capacity and availability analysis
  • Perform analysis, modeling and simulation of end-to-end communication systems
  • Interface with subject matter experts and providers of various subsystem products and technologies
  • Support new business and technology development through RFI/RFP and company investment
  • Develop RF/communication payload specifications and flow requirements from system/spacecraft/communication subsystem specifications to all affected RF component, antenna and bus subsystems
  • Support the build, test and verification of RF and Communications engineering development units
10

Socpac Communications / Systems Engineer Resume Examples & Samples

  • Experience working with the DoD Special Operations Community
  • Familiarity with Combatant Command, Joint, Special Operations, Intelligence community, and Operational planning
  • Familiarity with RF spectrum concepts including Direction Finding, Spectrum Monitoring, Link Budgets, and Propagation
  • Familiarity with numerous forms of communication: IP, RF, Optical, Acoustic, SATCOM
  • Familiarity with Digital Forensics, Network Forensics, and Network Monitoring
  • Systems engineering experience to include requirements, architecture, risk analysis, and implementation / test plan development
  • Strong interpersonal skills to develop trusted relationships and integrate with operational users
  • Experience working in the special communications / activities community
  • 6-10 years of communications and networking engineering and technical evaluation of DoD systems, architectures, and capabilities
  • Familiarity with electronic warfare (EW) tactics, techniques, and procedures
  • Familiarity with all communications protocols and transport mechanisms (E.g., SATCOM, Radio, Wi-Fi, Bluetooth, etc.)
  • Experience with cross-domain solutions and intelligence systems
  • Knowledge of the capabilities of MITRE’s various centers and division
  • Strong leadership and technical management
  • Experience prototyping and testing new systems, and documenting performance characteristics
  • Experience conducting cyber threat assessments and analyzing communications architecture risks
  • Experience working away from a robust MITRE support network in a dynamic and operational focused customer space
  • Experience working in or with a Regional Combatant Command/Joint Force HQ communications environment
11

Communications Systems Engineer Resume Examples & Samples

  • Position requires a Bachelor’s degree in Electrical Engineering, Computer Science, Mathematics, Physics or Information Technology or related field with two (2) years of relevant work experience
  • Experience with communication/wireless technology
  • Mastery of at least one software or scripting language (C, C++, PERL, Python, Java, etc.)
12

Principal Communications Systems Engineer Resume Examples & Samples

  • Design, verify and test modem and digital communication blocks and subsystems for various communications and broadcasting standards, including wireless, cable, and satellite communications
  • Design, verify and test various calibration and control algorithms enabling higher performance from the analog front end, working closely with the RFIC and RF systems teams to optimize the overall system
  • Specify the HW/SW partition for various configuration, control and calibration algorithms while collaborating with the firmware engineering team to ensure the correct implementation
  • Expertise on complexity-aware, efficient, low power system design techniques is a strong plus
  • Matlab and C/C++ expertise, SystemC expertise a plus
  • Experience in developing, simulating and testing receiver algorithms
  • Ability to work closely within cross-functional engineering teams consisting of communications Systems, RFIC, ASIC and SW
  • The ideal candidate will be versatile, take initiative and have the ability to adapt to a dynamic environment
  • Strong analytical skills required
  • Leadership experience a plus
  • PhD in related field with 5 years' experience or Masters with 8 years’ experience
13

Communications Systems Engineer Resume Examples & Samples

  • BS degree in electrical engineering from an accredited engineering school and five (5) years of direct engineering experience
  • High knowledge of digital communications, RF system analysis, FEC coding, and communications engineering
  • In depth understanding of communication systems such as phase modulation, spread spectrum, signal detection, signal and interference analysis, baseband filtering, data formatting etc
  • Knowledge of regulatory approval process, radio frequency compatibility and interference assessment
  • Familiar with analysis software such as Matlab and Simulink
  • Must have good communication and organizational skills and the ability to work in a team environment
14

Communications Systems Engineer, Mid Resume Examples & Samples

  • 2+ years of experience with DoD system life cycle activities, including requirements analysis, engineering, design, integration, sustainment, testing, technical refresh, or operations
  • 1+ years of experience with system networking and communications systems
  • Experience in a military communications field, including extending DoDIN voice, video, and data networks
  • Knowledge of communication network technologies, including IP modems, encryption devices, TCP accelerators, IP network protocols, and QoS policies
  • Knowledge of DoD IT governance structures and processes, including Configuration Control Boards (CCB), Working Group (WG) process flows, and collaboration with external agencies and services
  • Ability to perform analysis of alternatives and present decision briefs, including evaluation of COTS products to senior government officials
  • BS degree in Engineering, CS, Mathematics, or a related field
  • CCNA or INCOSE ASEP/CSEP Certification
15

Space Communications Systems Engineer Lead Resume Examples & Samples

  • Experience with interfacing directly with multiple senior clients
  • Experience with generating or editing management level documentation, including policies, directives, and plans
  • Experience with leading a small, experienced team
  • Knowledge of space communications or satellite technology
  • Experience with leading mid-level engineers
  • Experience in program management
  • Experience in technical design, including database design principals and MBSE concepts
  • Experience with facilitating and prioritizing multiple sub-tasks
  • Experience with NASA
  • Certified Systems Engineering Professional (CSEP) Certification preferred
16

Communications Systems Engineer Resume Examples & Samples

  • Define communication architecture, sub-modules functionality and specifications covering areas like equalization, echo cancellation, timing recovery, error correcting codes, PLLs etc
  • Definition and building communication simulation platforms using Matlab/C++ for algorithms proof of concept, performance analysis, floating & fixed point design, parameters optimization etc
  • Transfer knowledge to ASIC & SW teams, in Lab bring-up, performance evaluation and system debugging
  • Experience in digital communications systems and SoC, at least two of the areas below
17

Communications Systems Engineer Resume Examples & Samples

  • 5+ years of experience with supporting projects and systems developed under the NAVAIR Systems Engineering and Technical Review (SETR) process
  • Experience with supporting the design, development, and review of systems engineering design artifacts, including Concepts of Operations (CONOPs), requirements analysis, interface design, system architecture development, and system performance analysis
  • Experience with Military communications systems and subsystems
  • Experience with DoD Architecture Framework (DoDAF) processes and documentation requirements preferred
  • BS degree in an Engineering, Physics, or Mathematics field
18

Space Communications Systems Engineer Lead Resume Examples & Samples

  • And senior
  • Level systems engineers. Maintain responsibility for keeping projects on schedule and within budget and reporting status to Booz Allen management and the client. This position is located primarily at NASA Headquarters, Washington, DC with frequent travel to Goddard Space Flight Center, Greenbelt, MD, and on occasion other NASA Centers
  • Experience with leading mid
  • Level engineers
  • Experience with facilitating and prioritizing multiple sub
  • Tasks
19

Communications Systems Engineer, Mid Resume Examples & Samples

  • 1+ years of experience with system networking and communications
  • 1+ years of experience with communication network technologies, including IP modems, encryption devices, TCP accelerators, IP network protocols, and QoS policies
  • Experience with Cisco networking products
  • Experience with DoD system life cycle activities, including requirements analysis, engineering, design, integration, sustainment, testing, technical refresh, or operations
  • Ability to analyze alternatives and present decision briefs, including evaluation of COTS products to senior government officials
  • BS degree in Engineering, CS, Mathematics, or related field
  • CCNA or similar Certification
20

Communications Systems Engineer Resume Examples & Samples

  • Verify signal and image collection systems, and define the support of development of processing algorithms for verification
  • Develop analysis requirements, and integrate new signal and image processing technologies
  • Design and analyze systems for the extraction of information from signal and image sensor
  • Basic qualifications for a Level 2 are a Bachelor’s Degree in a STEM discipline with 2 years of experience or a Master’s Degree in a STEM discipline with 0 years of experience
  • Basic qualifications for a Level 3 are a Bachelor’s Degree in a STEM discipline with 5 years of experience, Master’s Degree in Systems Engineering with 3 years of experience, or 0 years of experience with a PhD
  • U.S. Citizenship required. An active TS/SCI clearance based on current SSBI (within 5 years) is required for this position
  • Ability to apply signal and image processing principles, theories and concepts
  • Familiarity with wireless communication theories and technologies
  • Experience in signal processing design and/or development
  • Strong/verbal/written communications skills, along with the ability to work well within a team environment
  • Familiarity with software development environments
  • Experience in various programming languages, python, matlab, perl, etc
  • Intermediate understanding of the following systems
  • RF Design
  • Cellular/wireless systems and protocols
  • Computer networks
21

Communications Systems Engineer Resume Examples & Samples

  • Perform technical analysis and provide technical support in the development of technologies to enable end to end Special Communications (SC) capabilities
  • Develop and perform analytical procedures to document and manage changing requirements and capabilities/technologies
  • Provide technical expertise to the SC Roadmap, Investment Strategy, Strategic Plans, and Enterprise Strategy efforts
  • Conduct studies and analysis supporting engineering, technology assessments, and system engineering requirements
  • Coordinate with other technical specialist in government, academia and industry to keep abreast of emerging technologies and make recommendations on the evolution of SC capabilities
  • Work in conjunction with engineers and subject matter experts throughout the Intelligence Community and engage with military and IC representatives to determine intelligence needs
  • Must have an active/current TS/SCI security clearance
  • Must be willing to take and pass a polygraph within 90 days
  • Bachelor's degree in Engineering, Physical Science or Computer Science
  • Experience in the review and analysis of technical documentation to include technical journals and system specifications
  • Experience in using data organizing and presentation software (Microsoft Office Suite)
  • Training or experience in intelligence systems
  • Training or experience with technical material on or related to Special Communications
  • 5 years of relevant experience working with IC
  • Basic understanding of multiple communication technologies (cyber, satellite, RF, cellular, etc.)
22

Senior Communications Systems Engineer Resume Examples & Samples

  • Engineering experience in the design and implementation Defence and / or Commercial communication networks or similar complex electronic systems
  • Experience and proven expertise in the areas of military Command, Control, Communications, and Computers (C4I) systems
  • Experience working within a Systems Engineering lifecycle
  • Analogue and digital radio communications knowledge
  • Experience with authoring/reviewing technical documentation
  • Extensive experience in management of engineering design / technical maintenance
  • Highly developed interpersonal and communications skills
  • Engineering Degree suitable to achieve membership of the Australia Engineers in relevant Communications, Computing, or Electronics related field
23

Space & Communications Systems Engineer Resume Examples & Samples

  • Systems Engineers support all levels of requirements development and verification. Activities include
  • Specifications, use cases, activity diagrams, functional flow, timing, and interface integration development
  • Decomposition of high level requirements and their allocation to subsystems, hardware and software configuration items
  • Requirements management and configuration control using modern database tools to manage configuration and traceability, and interface with modeling tools to verify system configuration and operation
  • Bachelor’s Degree in a Science, Technology, Engineering or Mathematics discipline from an accredited university and 2 years of Systems Engineering experience in an aerospace / defense environment OR
  • Master’s Degree in a Science, Technology, Engineering or Mathematics discipline from an accredited university and 0 years of Systems Engineering experience in an aerospace / defense environment
  • Active in-scope DOD Top Secret or SCI access
  • Experience working on military aircraft / spacecraft systems
  • Experience in developing, managing, and decomposing requirements
  • Experience in system architecture, CONOPs, or model based system engineering
  • Experience in subsystem, payload, or system integration
  • Experience using DOORS
  • Strong People and Technical Leadership Skills
  • Excellent communication Skills (upward and downward)
24

Maritime Fiber Communications Systems Engineer Resume Examples & Samples

  • 5+ years of experience with applied research and development related to maritime systems
  • 5+ years of experience with systems engineering in a lead role
  • 2+ years of experience with fiber–optic communications systems and related technology components, including winding, spooling, or pay–out mechanisms
  • BS degree in Engineering or Physics
  • Ability to communicate effectively and efficiently within a dynamic, interdisciplinary environment
  • Ability to write concisely and display persuasive speaking and writing expertise
  • Ability to convey technical and scientific issues accurately to people with varying levels of expertise
  • MS degree in Engineering or Physics preferred
25

Principal Communications Systems Engineer Resume Examples & Samples

  • Design, verify and test demodulators for various communications standards, including DVB-T/T2, DVB-S/S2, ISDB-T, ATSC, 802.11 and MoCA
  • Design, verify and test various calibration and control algorithms enabling higher performance from the analog front end and work closely with the RFIC and RF systems teams to optimize the overall system
  • Specify the HW/SW partition for various configuration, control and calibration algorithms and collaborate with the firmware engineering team to ensure the correct implementation
  • Ability to work closely within cross-functional teams consisting of Communications Systems Engineers, RFIC, ASIC and SW
  • PhD + 8 years of experience or Masters + 6 years of experience
26

Senior DoD Communications Systems Engineer Resume Examples & Samples

  • Analyze and allocate system, subsystem, and hardware and software component requirements
  • Develop system and subsystem architectures compliant with system requirements
  • Perform analysis and modeling in support of requirements and architecture definition
  • Participate in technical interchange meetings with customers and stakeholders
  • Interact with mechanical, electrical and software engineers to ensure designs meet requirements
  • Must be a U.S. Citizen with Active DoD Secret Clearance
  • Minimum 10 years of related systems engineering experience
  • Must have experience with “over the air” Communication Systems
  • Must have experience with requirements analysis and specification generation
  • Must have experience with defining and evolving system architectures
  • Must be able to work within a structured Systems Engineering process environment including a task oriented, value based management system
  • Must have experience in proposal development
  • Working experience with DOORS, Rhapsody, Agile methods
  • Working experience with MATLAB modeling and simulation
  • Experience with Satellite Communication Systems
27

Communications Systems Engineer Resume Examples & Samples

  • BMDSS designs, builds, and maintains MDIOC IT and facility infrastructure for four customers in addition to the sustainment and upgrade of the C2BMC Test Bed
  • The Implementation Engineer will develop and ensure Change Request (CRQ) Technical Data Packages are complete, comprehensive, and up-to-date; and coordinate with BMDSS peers, external organizations, and customers
  • The Implementation Engineer will produce work products that are of high quality and adhere to JRDC and BMDSS procedures and policies including support for internal and external reviews such as the BMDSS Configuration Control Board (BCCB), BMDSS Engineering Review Board (ERB), Work Screening Team (WST), and the Change Authorization Board (CAB)
  • The Implementation Engineer coordinates with the project management team to ensure projects are executed and completed against approved schedules
  • Understanding of the project lifecycle and related processes, traditional systems engineering skills and knowledge, requirements traceability matrices and familiarity with information technology concepts (i.e., communication networks, computer and networking hardware)
  • Degree in an IT or Engineering related discipline
28

Senior IT & Communications Systems Engineer Resume Examples & Samples

  • Lead the successful technical and commercial delivery of projects
  • Design of IT and communication systems including: structured cabling, wired and wireless voice and data networks, healthcare systems, airport systems, CCTV, Access Control and general applications of technology to the built environment. Work closely with inter-disciplinary technical leaders and ITC leaders from other Arup offices
  • Preparation of drawings detailing the systems designed
  • System design calculations
  • Writing of reports, specifications
  • Post contract services including in some cases commissioning
  • Systems integration consultancy
  • Day to day financial management of projects
  • Manage RFP and interview process and work with the leadership team to prepare proposals
  • 10-12 years of relevant experience in the industry
  • A sound knowledge of engineering fundamentals as they relate to building systems and site servicing
  • Excellent interpersonal skills will be needed to develop and maintain effective relationships with clients, Architects, Engineers, Contractors and other team members
  • Familiar and experienced in working with Microsoft Office products, AutoCad, and Revit
  • Excellent planning and organization skills required for our fast-paced environment, and must be highly motivated, proactive and willing to take on new challenges
  • Experience across a range of project types: high rise commercial, healthcare, post-secondary education, convention centers, airports, etc
29

Communications Systems Engineer, Senior Resume Examples & Samples

  • Experience with common engineering tools and skills to include Linux, scripting, such as Python, embedded software development, such as blinking an LED on a development board, and integrating systems together, such as interpreting ICDs
  • Ability to integrate development boards, provide technical oversight and leadership, work independently, synthesize and present conclusions of engineering work to client, and apply foundational engineering expertise to a broad array of applications and technologies
  • MA or MS degree in EE
  • Ability to travel up to 25%, as required
30

Communications Systems Engineer Resume Examples & Samples

  • Bachelor’s Degree in an Engineering discipline and 15+ years of experience or 15+ years of related experience
  • Experience in managing delivery contracts
  • Familiar with railway operational requirements
  • Good communication skills and English fluency
  • Ability to deliver Communications Systems works to quality, budget and schedule requirements
  • Good knowledge of railway regulations and standards, safety case development and engineering safety management systems
  • Good interpersonal skills with proven ability to work effectively as part of a multi- disciplined team
  • Ability to interface with railway domain specialists, design managers and construction project managers, in a competent professional manner
  • Broad experience of the application of systems engineering to major infrastructure projects
  • Knowledge of Interface Management as applied to major railway infrastructure projects / technology development and implementation projects
31

Unified Communications Systems Engineer Resume Examples & Samples

  • Designs, documents, installs, maintains, and troubleshoots complex high availability hardware and software for Unified Communications
  • Works directly with Vendors/OEMs, Engineering staff, and User Transition personnel for integration improvements to the solution, as well as O&M for legacy equipment
  • Identify issues and create improvement processes to reduce incident outage times
  • Develop and maintain documentation of all processes associated with administration of the communications and system networks and duties performed by network & system administrators
  • Extensive messaging and Unified Communications design and administration
  • Voice, video, chat, teleconferencing, VTC
  • Microsoft technologies, particularly Skype for Business
  • (Optionally) Cisco technologies for Unified Communications and VTC
  • Hands-on experience installing, troubleshooting and operating Unified Communications technologies
  • PowerShell Scripting
  • Citrix XenDesktop 7
  • McAfee Next Generation Firewall
  • Knowledge of Dell Networking Appliances
  • Experience in a large, geographically dispersed environment
  • Possess one of the following certifications: MCITP; MCSA; MCSE - Communications; MCSA; MCTS
  • 8570 compliant (Within 90 days of hire)
32

Communications Systems Engineer, Mid Resume Examples & Samples

  • 3+ years of experience with engineering in a professional work environment
  • Experience with common engineering tools and skills, including Linux, scripting, such as Python, embedded software development, such as blinking an LED on a development board, and integrating systems together, such as interpreting ICDs
  • Knowledge of wireless communication systems, embedded signal processing, and security technologies
  • Ability to apply complex technical concepts to client missions and use cases
  • Ability to show leadership expertise
  • BA or BS degree in EE
  • Knowledge of commercial wireless technologies, Android security architectures, encryption, navigation algorithms, precision timing technologies, link budgets, and RF propagation
  • Ability to show intellectual curiosity
  • Ability to travel up to 25% of the time, as required
33

Rf / Communications Systems Engineer Resume Examples & Samples

  • Work with our customers and help them find solutions to build systems for characterization, testing, validation / verification, real-time prototyping and simulation of their chipsets, devices, subsystems and systems
  • Perform technical feasibility for large opportunities, develop reference architectures for test and communications systems
  • Develop software components and document technical requirements and characterization / test results for customers
  • Identify and solve application-specific system level engineering problems
  • Create and present new material in a teaching environment
  • Independently design and conduct experiments and generate summary report
34

Communications Systems Engineer Resume Examples & Samples

  • Technical advisor, SME and Systems Engineer for SOF-unique communications requirements
  • Develop technical requirements based on approved CDD/ CPDs, C-MNS, urgent deployment acquisitions (UDAs), and other initiatives
  • Perform systems engineering analyses to identify functional requirements, interfaces, environmental factors, transition strategies, cost and risk considerations, and other issues that impact PEO C4
  • Develop requirements specifications, top-level system designs, interface specifications, technical roadmaps/strategies, risk mitigation approaches, transition strategies and rapid acquisition approaches supporting SOF community
  • Work with customer, government, vendor, and other stakeholders in a fully collaborative environment
  • BS in Electrical Engineering, Systems Engineering, Computer Science, or Telecommunications
  • Strong technical background in systems engineering and system analysis
  • Significant tactical communications experience and knowledge, specifically radio frequency (RF) communications and SATCOM
  • Experience in developing and presenting technical recommendations to SOF/ joint forces and mission partners operating in a tactical environment
  • Ability to collaborate with other engineers and non-technical leaders/ stakeholders to rapidly develop C4I solutions to SOF tactical communications challenges
  • Masters degree in Electrical Engineering, Systems Engineering, Computer Science, or Telecommunications
  • Knowledge of local area network (LAN) and wide area network (WAN) requirements identification, design, equipment, and transport topologies including virtual private networks (VPNs), virtual LANs (VLANs), IPv4 and IPv6 network configuration, and IP network security
35

Unified Communications Systems Engineer Resume Examples & Samples

  • Cisco UCM system administration and maintenance activities and tasks with the responsibility for evaluation and architecture of all aspects of Unified communication. This includes Standard SIP based IP voice
  • Management of user accounts, voice mail, call queues, primary rate interfaces (PRI), fax lines, and office mailboxes
  • VR call flow scripting and management , automatic call distribution (ACD) management, and business application integration
  • Create detailed architecture designs for next generation voice technologies and creating engineering guidelines for enhancements based on current production deployments
  • Programming / Troubleshooting for Cisco Unified Communications product portfolio, Avaya (S87XX/83XX/85XX class media servers and gateways running Avaya Communications Manager R6.x; Session Manager, system manager, IVRs and Microsoft Lync or equivalent
  • Provide support for all VoIP incident/problem management service desk support
  • Device management including Internet Protocol (IP) phones, analog adaptors supporting fax machines or other analog equipment
  • Bachelors degree from an accredited college or university required, equivalent experience or training will be considered in lieu of degree
  • At least five (5) years of related engineering and support experience in Unified Communications (UC), VoIP, video conferencing, and telecom services required
  • Cisco Certified Network Professional (CCNA) (CCNP) Voice or higher certification, or other applicable Cisco certifications/experience, preferred
  • Experience with ACME packet SBC in a carrier voice offering is required
  • ITILv3 preferre
  • Experience in telecommunications disaster recovery, strategic planning, and execution
  • Excellent documentation skills
  • Ability to convey technical concepts to non-technical executives and managers
  • Ability to serve as a competent administrator of mixed-technology solutions
  • Ability to act as part of a structured operations team in support of resolving technical issues
  • Strong report writing skills and ability to interpret data
36

Entry Level Communications Systems Engineer Resume Examples & Samples

  • Developing space communication system architecture simulations
  • Performing system-level CONOPS development, functional analysis and decomposition
  • Supporting system-level integration and validation
  • Perform analyses for space communication systems, including: link analysis, signal distortion, system capacity, reliability, and performance
  • Develop analysis tools using MATLAB and object-oriented software platforms