Corrosion Technician Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the corrosion technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

H Rath

Haylee

Rath

838 Nathen Via

San Francisco

+1 (555) 101 4209

838 Nathen Via

San Francisco

Phone

p +1 (555) 101 4209

Experience Experience

Detroit, MI

Corrosion Technician

Detroit, MI

Witting-Rohan

Detroit, MI

Corrosion Technician

Implements CP surveys of pipelines, stations, and terminals
Maintains records, drawings and enters data into the computer, and provides reports
Conducts interference tests, performs quality control inspections, and performs troubleshooting and repair of rectifiers, remote monitoring unit (RMU) equipment and directional current devices (PCRs)
Assists with the design of cathodic protection (CP) systems and confers with departments responsible for contracts, environmental compliance and right-of-way procurement
Assists with the preparation of contract drawings, specifications and bid invitations
Establishes and maintains professional relationships with local, regional, and national NACE (National Association of Corrosion Engineers) International organizations. May represent Company at regional inter-company corrosion coordinating committees and audits conducted by state and/or federal agencies or DOT
Assists with pipeline maintenance duties repairing cathodic protection and pipeline equipment and clearing right-of-way. Investigates and restore rectifier outages reported by patrol pilot

Houston, TX

Pipeline Corrosion Technician

Houston, TX

Simonis-Ebert

Houston, TX

Pipeline Corrosion Technician

Climbs and works at various heights and may work in a standing, sitting, lying, crouched or kneeling position
Actively contributes as a member of the work crew, providing and supporting the training of other members
Performs regularly scheduled inspections of corrosion control systems for the Gas Processing Pipelines
Works in temperature extremes due to weather conditions and operating equipment
Successfully complete OQ training on covered tasked performed
Troubleshoots, repairs and maintains all corrosion control protections systems and associated equipment
Reads and interprets drawings and schematics, uses technical resources in the performance of assigned work, uses hand and power tools, and other specialty equipment including data collection devices and related computer application programs

present

Philadelphia, PA

Senior Corrosion Technician

Philadelphia, PA

Koelpin-Hagenes

present

Philadelphia, PA

Senior Corrosion Technician

present

Provide maintenance of field test equipment, ensure good operating condition and render minor repairs
Work with Engineers in the preparation of survey reports and final job reports
Sketch physical features of installation site for subsequent detail
Conduct post installation surveys, complete interference testing and coordinate rectifier output
Assemble data for preparation of final client report including service recommendations
Monitor construction activities for adherence to design specifications
Sketch rectifiers, anodes, test stations, and other design features on prepared drawings

Education Education

Associate’s Degree in Corrosion Technology

East Carolina University

Associate’s Degree in Corrosion Technology

Skills Skills

Knowledge of electrical principles – intermediate proficiency
Strong initiative and excellent oral and written communication skills
Ability to work with others, take direction from supervisor(s), focus attention on details, and follow work rules
Basic computer skills (knowledge of MS Office, various operation systems and other company software)
MS Office – basic proficiency
Be available for shift work when applicable
Available for shift work when applicable
Ability to complete work assignments with minimal supervision in an acceptable time frame
Basic math skills (addition, subtraction, multiplication, division, fractions, decimals
Knowledge of protective coating used on petroleum pipelines

Create a Resume in Minutes

15 Corrosion Technician resume templates

Read our complete resume writing guides

Corrosion Technician Resume Examples & Samples

Implements CP surveys of pipelines, stations, and terminals
Reads and adjusts rectifiers and other pipeline/station facilities with appropriate instrumentation
Maintains records, drawings and enters data into the computer, and provides reports
Conducts interference tests, performs quality control inspections, and performs troubleshooting and repair of rectifiers, remote monitoring unit (RMU) equipment and directional current devices (PCRs)
Assists with the design of cathodic protection (CP) systems and confers with departments responsible for contracts, environmental compliance and right-of-way procurement
Assists with the preparation of contract drawings, specifications and bid invitations
Establishes and maintains professional relationships with local, regional, and national NACE (National Association of Corrosion Engineers) International organizations. May represent Company at regional inter-company corrosion coordinating committees and audits conducted by state and/or federal agencies or DOT
Specific experience in corrosion and/or pipeline operations or a technical diploma or degree
Must have good electrical and mechanical skills, including a basic understanding of electricity and electrical theory
Must be able to perform basic math and algebra calculations
Must have prior experience in or have the ability to sketch and develop plot plans
Advancement from one step level to the next is based on minimum time requirements, as well as meeting and maintaining satisfactory job performance standards and obtaining required certifications
Proficiency with computer applications, including Microsoft Excel, Word, Project, Outlook and CPDM
Well-balanced interpersonal skills and strong verbal and written communications skills are required, including the ability to do technical writing and provide required documentation and reports
Must be accountable and take direction from Managers; keep required work schedules, which include regular and predictable job attendance; focus attention on details; adhere to operational procedures and follow work rules
Organizational skills and the ability to prioritize tasks are essential, including the ability to plan, organize, and oversee assigned work programs and projects
Must be flexible and able to work effectively in a team environment and consistently maintain a professional and respectful demeanor/attitude with co-workers, clients, vendors, and regulatory agencies
Must have a good sense of direction in order to locate remote pipelines, rectifiers and test stations
Working knowledge of Corrosion instrumentation
Working knowledge of computerized data Acquisition Equipment
Experience in the design, construction, monitoring, and troubleshooting of cathodic protection systems and pipeline maintenance
Knowledge of common practices, procedures, tools, materials, and equipment used in cathodic protection of refined oil pipelines
Working knowledge of occupational hazards and required safety precautions related to assigned duties
Understanding of pipeline operations, locating, locating equipment and right-of-way
Knowledge of underground utility operations and right-of-way
Knowledge of protective coating used on petroleum pipelines

Corrosion Technician Resume Examples & Samples

1 year experience with basic Laboratory procedures or 1 year experience with industrial pressure systems
Experience with instrumentation fittings
Experience with flow, pumps and meters
Experience working with pressurized gases and chemicals
Experience writing procedure or quality manuals preferred
Electrical experience in industrial circuits and automation systems
Knowledge of pressure/temperature systems
College or Technical Certification
Strong Mechanical skills
Experience with Microsoft Word, Excel
Familiar with high pressure fittings

Corrosion Technician Resume Examples & Samples

Collect all internal corrosion liquid samples at liquid sample pots and at pig traps
Install replacement coupons
Complete in field liquid sample chemical analysis and bacterial testing
Load all data to the Kinder Morgan internal corrosion database (TSIMS) on a timely basis
Maintain all field internal corrosion equipment
Set corrosion inhibitor injection rates as prescribed by Pipeline Integrity Group
Participate in Internal Corrosion Program Performance Evaluation meetings monthly
Understand and operate all corrosion related instrumentation
Proficient with computer skills (MS Office, operating systems, company software, and technical systems)
Basic Math skills (addition, subtraction, multiplication, division, fractions, decimals, etc)
Ability to operate and maintain chemical injection and pressure access equipment
Ability to effectively organize, plan, prioritize, document, and complete work independently
Ability to successfully work in team environment
Strong communication skills both verbally and in writing
Job level commensurate with knowledge, skills and experience
NACE certification
Experience with crude oil pipeline internal corrosion control programs
Knowledge of company policies, TRRC, and DOT regulations
Knowledge and experience with safe handling practices of liquid products

Corrosion Technician Resume Examples & Samples

Responsible for all activities related to corrosion control and pipeline integrity which includes
Design, install, operate, and maintain cathodic protection facilities, galvanic anodes, and internal corrosion control facilities
Monitor the condition of the pipeline through pipe-to-soil potentials, visual inspection, examination of coupons, data from in-line tools, etc…
Monitor electrical isolation and identify points of electrical shorts
Conduct various tests, measurements, and surveys to ensure efficient operation of cathodic protection facilities
Lead efforts to design and implement effective long term cathodic protection systems. Prepares drawings, and job specifications
Assist E&C and Engineering personnel with the evaluation / development / implementation and maintenance of facility grounding systems
Oversee the construction and/or work activities performed by 3rd parties
Experience in testing and mitigation of interference issues
Good record of safe work practices
Working knowledge of environmental and safety aspects of coating projects
Ability to estimate installation, operating and maintenance expenses associated with corrosion systems
Basic computer skills (knowledge of MS Office, various operation systems and other company software)
Basic math skills (addition, subtraction, multiplication, division, fractions, decimals
Trained and skilled in the use of off road vehicles including both ATV and UTV styles
Must be able to work with a team, take direction from supervisor(s), adhere to required work schedules (shift work and overtime as needed), focus attention on details and follow work rules
Ability to mentor fellow employees when the opportunity presents itself
Associate degree in a technical field, or equivalent skills and experience
Experience with CPDM and RStreng
Working knowledge of AC and DC electrical systems, corrosion related portions of NEC, and NACE standards
Knowledge of company policies and DOT regulations
Knowledge and experience with safe handling practices of products (gas and liquids)

Corrosion Technician Resume Examples & Samples

Minimum 5 years experience in pipeline or related operations
Self starter and high drive for results
Must be able to handle multiple tasks
Exercise skill in the monitoring, maintenance, and repair of cathodic protection facilities
Plan, organize, and oversee assigned work programs
Analyze and evaluate operations; develop and implement corrective action to resolve problems
Use senses of sight, hearing, and smell to aid in the identification of systems and equipment malfunction
Distinguish basic colors
Physically perform the essential job functions
Must be self-motivated and capable of working with minimal supervision
Proficiency with computer applications, including Microsoft Excel, Word and Outlook
Well-balanced interpersonal skills and demonstrable verbal and written communication skills
Must be accountable and take direction from supervisors, keep required work schedules, focus attention on details, and follow work rules

Corrosion Technician Resume Examples & Samples

Responsible for all activities related to corrosion control and pipeline integrity
Cathodic protection includes gathering annual pipe-to-soil surveys, gathering rectifier readings and troubleshooting rectifier units, performing interference testing, and recommending, designing, overseeing installation, and performing as-built drawings for needed cathodic facilities
Design, install, operate, and maintain cathodic protection facilities, power lines, galvanic anodes, and internal corrosion control facilities
Monitor the condition of the pipeline through pipe-to-soil potentials, visual inspection, examination of coupons, data from in-line tools, etc
Atmospheric corrosion duties include performing coating evaluations and providing technical assistance to district operations
Internal corrosion responsibilities include evaluating, developing and monitoring the internal corrosion control program for single, multiphase gas pipelines and liquid lines
Gather and evaluate data, recommend, perform, and oversee mitigative measures
Document all related work associated with performing and maintaining regulatory compliance and operating and maintenance procedures. Lead efforts to design and implement effective long-term cathodic protection systems
Prepares drawings, job specifications and contract bid documents
Pipeline integrity responsibilities include providing assistance running in-line digital metal loss and stress corrosion cracking inspection tools, writing associated action plans, performing and documenting prove-up inspections, and writing closure reports
Perform coating evaluations for atmospheric corrosion control and prepare mitigation plans
Participate in federal inspections
Inspect 3rd party construction / work activities

Corrosion Technician Resume Examples & Samples

Work with specific objectives and instruction from senior staff on customer drawings and specifications
Conduct various specific test procedures to gather data for evaluation purposes
Diagnose and recommend remedies for system difficulties observed during resurvey operations
Apply basic skills learned as Corrosion Tech I with increasing independence
NACE Cathodic Protection Certified. CP II preferred
3 years cathodic protection system testing and troubleshooting experience required
OSHA classes preferred
Strong team, internal customer service skills and problem solving skills
Must be able to handle multiple tasks simultaneously
Must be able to travel overnight to customer sites each week and, if needed, over the weekend

Corrosion Technician Resume Examples & Samples

More than 1 year related field experience required
NACE Level II Certification required
Strong team, internal customer service skills and problem solving skills are a must

Corrosion Technician Resume Examples & Samples

Responsible for all activities related to corrosion control and pipeline integrity for upstream, midstream, and downstream assets
Duties include but are not limited to: (1) Gathering and evaluating data, (2) Recommending, performing, and overseeing mitigative measures, and (3) Documenting all related work associated with performing and maintaining regulatory compliance and operating and maintenance procedures
Cathodic protection includes gathering annual pipe-to-soil surveys, gathering rectifier readings, troubleshooting cathodic protection equipment, performing interference testing, and recommending, designing, overseeing installation, and performing as-built drawings for needed cathodic facilities
Internal corrosion responsibilities include evaluating, developing, and monitoring the internal corrosion control program for gathering and transmission pipelines
Atmospheric corrosion duties include performing coating evaluations and providing technical assistance to region operations
Pipeline integrity responsibilities include providing assistance with running in-line-inspection digital metal loss, and caliper inspection tools, writing associated action plans, performing and documenting prove-up inspections, and writing closure reports
Complete all applicable documentation and record keeping
Demonstrate performance toward operational excellence
1-3 years of applicable experience in the Natural Gas Industry
Experience reading and interpreting instructions and technical manuals
Knowledge of operating cost associated with the equipment in area of responsibility
Ability to work with a team, take direction from supervisors, keep required job schedules, focus attention on details, and follow work rules

Corrosion Technician Resume Examples & Samples

Understand and operate all corrosion related instrumentation Good record of safe work practices
Job level commensurate with experience and skill set. Certifications, licenses, registrations
NACE certification preferred
Must possess and maintain a valid driver’s license and driving record satisfactory to the Company and its insurers
May be required to achieve and maintain certifications as required to perform job duties

Corrosion Technician Resume Examples & Samples

Responsible for all elements of a field corrosion control program and provides direct support to Kinder Morgan’s pipeline integrity program
Cathodic protection responsibilities include, but are not limited to, gathering annual pipe-to-soil survey data; gathering rectifier readings and troubleshooting rectifier units; performing interference testing; and designing, overseeing installation of, and developing as-built drawings for cathodic protection facilities
Pipeline integrity focused responsibilities include providing assistance with running in-line digital metal loss and stress corrosion cracking inspection tools, writing associated action plans, performing and documenting inspections, and writing closure reports
Designs, installs, operates, and maintains cathodic protection facilities, galvanic anodes, and internal corrosion control facilities
Monitors the condition of natural gas pipeline through pipe-to-soil potentials, visual inspection, examination of corrosion coupons, review of data from in-line tools, etc
Monitors electrical isolation and identifies points of electrical shorts on corrosion control systems
Conducts various tests, measurements, and surveys to ensure efficient operation of cathodic protection facilities
Evaluates, develops and monitors data as part of an internal corrosion control program
Gathers and evaluates data, prepares corrosion control recommendations and oversees corrosion mitigation measures
Prepares documentation of all work associated with regulatory and compliance associated tasks
Leads efforts to design and implement effective long-term cathodic protection systems
Prepares drawings, job specifications, contractor scopes-of-work, and contract bid documents
Assists E&C and Engineering personnel with the evaluation / development / implementation and maintenance of facility grounding systems
Performs coating evaluations for atmospheric corrosion control and prepare mitigation plans
Participates in regulatory inspections
Inspects 3rd party construction / work activities
Mentors fellow employees when appropriate
Understand DC circuits, Ohm’s Law, and how to apply them to cathodic protection of buried pipelines
Confidently operate common pipeline corrosion control related equipment and test devices such as line-locators, digital-multimeter, soil-resistivity kit, CSE half-cells, and data-collectors
Outstanding record of safe work practices is mandatory
Working knowledge of environmental and safety aspects of pipeline coating projects
Ability to complete work assignments in remote areas with minimal supervision in a timely manner
Proven ability to evaluate installation, operating and maintenance expenses associated with corrosion systems
NACE certification(s) – NACE-CP1, CP2, CP3 etc
Experience in all project management, pipeline operations, in-line-inspections,
Advanced knowledge of AC and DC electrical systems, corrosion related portions of NEC, and NACE standards

Corrosion Technician Resume Examples & Samples

Conduct periodic resistivity and potential surveys on pipelines, compressor stations and storage field facilities to determine corrosive areas and record performance of cathodic protection systems
Check rectifiers and magnesium anode installations and determine operating efficiency
Assists in analyzing trouble areas and recommend solutions
Install interference bonds in cooperation with other companies
Assists in conducting current requirement tests for new ground bed installations
Locate suitable installation; maintain records of operation and maintenance of cathodic protection equipment
Ensure landowners are contacted relative to new installations
Direct installation of magnesium anode ground beds, impressed current ground beds and rectifier installations
Advise Team Leader of needed repairs in corrosion test stations, bonding stations and ground bed repair
Directs maintenance of cathodic protection equipment such as painting of rectifiers and corrosion test stations
Assists instructing employees in leakage and corrosion control procedures
Insure leakage inspection, and assures leakage schedules are being maintained
Assist leakage inspection personnel and Team Leader in compiling and maintaining their leakage records
Compiles leakage information required by DOT
Checks all leakage detection equipment and affects repairs when necessary
Conducts close interval surveys
Detects and conducts the repair of shorted road casings
Identify corrosion issues to be addressed by Engineering Services
Bi-monthly: Performs various duties such as: checks working conditions of rectifier installations, and all critical bonds. Quarterly: compiles area leakage summary. Annually: checks electrolysis bonds and conducts potential surveys on protected high-pressure lines
Using PC and/or hand held device, completes Work Orders, enters data into Job Plans, creates new Work Orders, etc. in CMMS (Computerized Maintenance Management System - Maximo or SMART)
High school or GED diploma required
Ability to read, comprehend and apply DOT codes and ANSI / ASME standards as appropriate
Good organizational skill a must
Able to handle multiple tasks for different people
Able to complete work timely with little supervision
Must demonstrate basic personal computer (PC) skills, and must have the ability to obtain basic skills in using a hand held computer
Must be able to obtain basic skills in using CMMS (Maximo and SMART)
Willing to attend Basic, Intermediate, and Advanced Underground Short Courses annually and subsequently obtain NACE certification
Depending on the qualifications of the applicants, the successful candidate may be offered a position at a more appropriate level and/or ladder

Corrosion Technician Resume Examples & Samples

Sketch rectifiers, anodes, test stations and other design features on prepared drawings
Solve and make corrections to systems as approved by supervisors
Effectively transfer knowledge to other employees and clients
1+ year Oil & Gas field work experience
NACE Cathodic Protection Tester (CP1) Certification or working towards within the next 6 months
Experience operating quads and snowmobiles considered an asset
Safety Tickets such as First Aid, CSTS, H2S, WHMIS considered an asset

Corrosion Technician / Technologist Resume Examples & Samples

Sketch rectifiers, anodes, test stations, and other design features on prepared drawings
Assist senior personnel in the preparation of survey reports and final job reports
Technical Engineering Diploma or equivalent combination of education and experience
2+ years of relevant corrosion prevention and cathodic protection experience
Proficiency with computer software tools (Microsoft Word and Excel)

Corrosion Technician Resume Examples & Samples

Ability to work well with local Operations and Maintenance groups and other Corrosion Techs/Pipeline Integrity personnel and management
Demonstrate participation in the development of a culture focused on continuous improvement in safety
Demonstrate the ability to maintain appropriate, accurate, and time sensitive documentation and record keeping in accordance with Company Procedures
Responsible for supervising and supporting contract employees engaged in performing work for the company to ensure that the results meet pre-determined standards established by Denbury
Responsible for assisting the Corrosion Foreman in efforts to control costs
Assisting with the preparation of job plans and budgeting costs associated with corrosion control activities
Maintains open and honest lines of communication with Management, Co-Workers, other company departments, and outside organizations as required by daily operations
Monitor pipelines and facilities for external and internal corrosion and remediate as required per Company Procedures
Conduct tests including but not limited to: pipe-to-soil potentials, current magnitude and direction, visual examinations, corrosion measurements, soil resistivity, etc
Applies corrosion skills and aptitude to repair, install, troubleshoot, and perform other predictive and preventative maintenance tasks on cathodic protection systems and associated equipment and devices (rectifiers, ground beds, test stations, critical bonds, foreign line crossings, cased crossings, surveys, etc.)
Conducting close interval, ACVG, and DCVG surveys to detect deficiencies and correcting identified interference issues
Familiar with the Integrity Management Program and High Consequence Areas including: identification, validation, and assessments
Perform visual atmospheric inspections on above ground facilities and make or suggest repair criteria
Install, remove, and inspect internal corrosion coupons used to monitor internal pipeline corrosion rates
Inspect exposed pipe for coating failures, physical damage, or corrosion
Five (5) years of corrosion control related experience
NACE CP Tester or Technician is preferred
Strong initiative and excellent oral and written communication skills
Basic computer skills including: Microsoft Office Applications is required and Corrosion Database software is preferred
Electrical knowledge including AC, DC, and electrochemical theory
Must demonstrate a commitment to understanding and complying with all Federal, State, Local, and Company regulations, policies, guidelines, and procedures
Must be self-motivated and able to organize and plan daily work activities with little supervision
Knowledge of pipeline operations and the characteristics of products transported by pipeline
Valid driver’s license with acceptable driving record

Corrosion Technician Resume Examples & Samples

Gather and evaluate data toward corrosion control and pipeline integrity to include: gathering annual pipe-to-soil surveys, gathering rectifier readings and troubleshooting rectifier units, performing interference testing, and recommending, designing, overseeing installation, and performing as-built drawings for needed cathodic facilities
Recommend, perform, and oversee mitigative measures
Safely and efficiently effect the installation, maintenance, calibration and repair of Cathodic Protection equipment
Coordinate with the Operations Department as required to minimize operational impacts
Perform periodic inspections of electrical isolation and identify points of electrical shorts
Oversee the construction and / or work activities performed by 3rd parties
Maintain completion status of the ROW OQ defense training
Perform duties as assigned by supervision

Corrosion Technician Resume Examples & Samples

This role performs tests, repairs and maintenance related to pipeline corrosion
Inspects and tests facilities and equipment to identify existing and potential corrosion problems
Recommends course of action to eliminate or rectify corrosion activity
Installs and inspects cathodic protection equipment
Repairs, replaces and services corrosion equipment components
Identifies outside currents negatively affecting company operations and initiates corrective steps. Performs leak and odorant tests
Monitors advancements related to corrosion technology, practices, techniques and regulations
Maintains interactive work relationship with Specialists and Engineers to accurately and effectively complete job responsibilities
Directs and supports contractors to complete evaluations and reports and to develop mitigation measures to effectively address deficiencies in the cathodic protection systems
This is the first level of a two level job series
REQUIRED: A minimum of two years of corrosion control and cathodic protection experience or 3 years natural gas field experience
Documented knowledge and/or experience with corrosion control and electrical principles
Documented basic computer knowledge and/or experience
Knowledge of corrosion control and electrical principles
Knowledge of DOT regulations related to corrosion, odorant, leak testing and record keeping
Ability to use and maintain corrosion testing and cathodic protection equipment
Ability to define problems, collect data and draw valid conclusions
Ability to operate diagnostic testing equipment
Ability to interpret maps, plans and blueprints to locate pipeline facilities
Ability to communicate effectively, speak persuasively and develop rapport
Ability to operate personal computer and utilize software packages
Ability to work effectively in inclement weather conditions
Three years corrosion technician experience in related industry preferred
NACE I certification - If candidate does not have NACE I certification, they will be required to obtain NACE Level I within one year of hire
Preferred Degree or must have an equivalent combination of education and demonstrated related experience in lieu of preferred degree
Preferred: Associate, Other Education: Technical

Corrosion Technician Resume Examples & Samples

Cathodic protection includes gathering annual pipe-to-soil surveys, gathering rectifier readings and troubleshooting rectifier units, performing interference testing, and recommending, designing, overseeing installation, completing as-built drawings for needed cathodic facilities, and completing project closure reports
Internal corrosion responsibilities include evaluating, developing and monitoring the internal corrosion control program for gas pipelines
Gather and evaluate data, recommend, perform, and oversee mitigation measures
Prepare drawings, job specifications, and contract bid documents
Assist E&C and Engineering personnel with the evaluation / development / implementation and maintenance of facility grounding systems as needed
Participate in PHMSA inspections
Must be available to respond to “Special Permit” designated rectifier failures within 2 working days unless back-up arrangements are made
Must be available by company supplied cell at all times to respond to phone calls, callouts and emergencies, unless previous arrangements for back-up coverage are made
Be willing to travel overnight for training and to assist other corrosion technicians when needed
Proficient with computer skills (MS Office, CPDM, operating systems, company software, and technical systems)
Intermediate Math skills (addition, subtraction, multiplication, division, fractions, decimals, etc.)
Use safe work practice and active participation in the safety program
Experience with CPDM and RSTRENG

Corrosion Technician Resume Examples & Samples

Responsible to perform required readings (i.e. annual test points, isolated services, casings, bonds, foreign crossings) in compliance with applicable codes, standards, and procedures
Responsible for timely cathodic protection troubleshooting (i.e. low systems, shorted conditions)
Responsible for timely creation of remediation work orders (i.e. install anodes, clear short, install insulator, repair / replace test station). Follows through with necessary departments to ensure timely completion
Responsible for maintenance and updates of corrosion control mapping systems (Atlas pages / GIS) in a timely fashion
Responsible for performance of QA checks on reads performed by others
Responsible for troubleshooting and maintenance of rectifiers
Responsible for calibrating half-cells in accordance with procedures
Responsible for bridge inspections (exposed) crossings in accordance with procedures
Responsible for design of cathodic protection systems
High school diploma with equivalent combination of education and experience
MS Office – basic proficiency
Ability to read and understand codes, standards, and procedures
Mathematics aptitude – intermediate proficiency
Associate degree – technical / trade school with math or science-based curriculum
3 years pipeline cathodic protection / corrosion control
MS Office – intermediate proficiency
Knowledge of electrical principles – intermediate proficiency
Intermediate cathodic protection troubleshooting skills
Basic CP design skills
6+ years pipeline cathodic protection / corrosion control
Advanced cathodic protection troubleshooting skills
Intermediate CP design skills

Pipeline Corrosion Technician Resume Examples & Samples

Performs regularly scheduled inspections of corrosion control systems for the Gas Processing Pipelines
Applies corrosion control knowledge skills to repair, install, troubleshoot, analyze and perform other predictive and preventative maintenance tasks on assigned equipment, facilities, systems, and associated devices (rectifiers, test stations, ground beds, critical bonds, foreign line crossings, cased crossing, surveys, internal coupons, etc.)
Maintains and operates assigned equipment to meet operational needs in compliance with Company and regulatory requirements
Reads and interprets drawings and schematics, uses technical resources in the performance of assigned work, uses hand and power tools, and other specialty equipment including data collection devices and related computer application programs
Actively contributes as a member of the work crew, providing and supporting the training of other members
Works indoors and outdoors, in and around mechanical, industrial and electrical equipment
Required to climb about equipment and work in close proximities
Climbs and works at various heights and may work in a standing, sitting, lying, crouched or kneeling position
Capable of lifting from ground level a load up to 50 lbs
Must have the ability to get in and out of vehicles regularly and ride over rough roads
May be subject to overtime, required to carry a cell phone, and subject to 24/7 call out
Maintains and documents all records to comply with all regulatory and Company requirements
Troubleshoots, repairs and maintains all corrosion control protections systems and associated equipment
Actively support all corrosion control related activities associated with maintenance and new construction projects
Inspect and document anomalies (wall thickness, measure corrosion pits etc.)
A minimum of 5 years of Corrosion Control experience
NACE Corrosion Technician certification is preferred
DOT 49 CFR 192 experience
Experience with corrosion data tracking systems
Good communicator, work planner with excellent work ethics and a good background in computer applications
Must be available for call-out rotation and emergencies

Corrosion Technician Resume Examples & Samples

Execution of regulatory and company corrosion programs by
Corrosion Control fundamental including NACE standard practices and test methods
Strong audit and controls orientation

Corrosion Technician Resume Examples & Samples

Fully utilize company computer system and software
Supervise and participate in Cathodic protection system design and materials installation
Maintain Cathodic protection equipment
Budget and execute special projects
Provide thorough and accurate monthly reporting on all activities
Possess a working knowledge of 49 CFR part 195 and 192 if applicable
Technical group field representative for corrosion
Embrace and champion all safety policies and procedures according to the SPL HSSE manual
Manage contractors in a safe and efficient manor
Able to work unsupervised

Corrosion Technician Resume Examples & Samples

Maintain, troubleshoot and repair cathodic protection, internal corrosion monitoring and above/below ground coating systems
Manage and coordinate usage of third party contractors for corrosion surveys and cathodic protection system installations
Provide training, coaching and mentoring to other field personnel who perform corrosion control activities
Maintain company records to assure compliance with regulatory requirements
Provide technical expertise to assess and resolve design, operating and maintenance
Must have a minimum NACE Level CP2 Cathodic Protection Technician certification
Must have a minimum 3-5 years of experience in pipeline corrosion control
Knowledge of 49CFR Part 195 and related industry standards is required
Demonstrate effective written & verbal communication skills
Highly motivated with interpersonal skills to effectively work in a collaborative team
Subject to call out 24 hours a day, 7 days a week and extended workdays and/or

Nis-corrosion Technician Resume Examples & Samples

Requires a high school diploma or equivalent. Two-year technical degree is preferred
Requires two (2) years operations experience or equivalent technical experience. Three (3) years of plant field experience is preferred
Working knowledge of Work Management System (WMS), CMS, and DIS mainframe programs is preferred
Requires knowledge of CGV corrosion policies/procedures and applicable federal, state, and local regulations
Requires strong organizational/planning skills and a commitment to getting the job done
Requires strong interpersonal and communications skills and the ability to establish rapport with internal and external customers
Requires strong analytical skills and ability to interpret technical data with respect to inventory maps
Requires electrical and mechanical aptitudes in order to maintain corrosion equipment
Must be self-motivated and able to work with little direct supervision
Must be detail oriented and able to complete required documentation
Must be able to handle multiple projects and work effectively under deadlines and changing priorities and conditions
Must have demonstrated skills in decision making and problem solving
Must have a valid drivers license and be able to operate company vehicles

Corrosion Technician Resume Examples & Samples

The regular work schedule will be
Ensure facilities, personnel, tasks and duties comply with TransCanada's Community, Safety and Environmental policies and procedures as well as provincial standards
Maintain and utilize "as built" prints and update related documentation with respect to cathodic protection systems and pipeline related schematics
Utilize TransCanada’s computer maintenance systems
Install, commission, maintain, troubleshoot and repair cathodic protection systems
Provide feedback & support to Cathodic Protection Engineering & Project Management Team
Operate and maintain remote operating units for rectifiers (RMU)
Perform annual pipe to soil potential surveys, close interval surveys and analyze data
Perform required diagnostic testing e.g. shorted casings, interference testing
Assist and develop test station repair programs
Assist with general pipeline Right of Way (ROW) maintenance activities (erosion or sink hole repairs, line patrol, install identification signs and posts)
Play a lead role in notifying landowners and working with Contractors
Lead and manage safe and efficient completion of projects in the area, including the coordination and monitoring of contractor work activities or third party active control
Perform basic One Call line locates
Highly motivated and disciplined with strong interpersonal skills to effectively work in a geographically dispersed team environment
Demonstrated ability to competently and efficiently perform the duties assigned based on qualifications and experience
Willingness to work in all areas as required to support the team
Competent using equipment applicable to the maintenance of cathodic protection systems
Current with technological advances in the cathodic protection field
Utilize computers and e-mail for internal and external communication, record keeping, maintenance management, on-line reporting, material and supply ordering and filing of various forms
NACE Cathodic Protection Level 1 Certification is required
Minimum 5 years of experience in cathodic protection systems is preferred
Journeyman Interprovincial Electrical License and/or designation would be an asset
NACE Cathodic Protection Level 2 Certification would be an asset
Provide a driver's abstract for review

Corrosion Technician Resume Examples & Samples

This position is overtime eligible; hours of work may need to be extended as business needs arise. This position may require long periods at a work station, and may be required to drive long distances, be exposed to field operations and construction environments, travel on short notice to other company locations, which may involve some overnight stays away from home
Develop rolling short term (1-3 months) team work plans incorporating maintenance programs, regulatory compliance activities, project support and corrective maintenance work
Load leveling of resource availability ongoing against work commitments. Highlight resourcing pinch points and work solutions with corrosion manager and MPM
Plan and manage major and minor outages and routine maintenance
Scheduling of monthly/weekly team resources: Develop work execution plans and detailed schedules to provide direction and coordination of project activities associated with the corrosion team
Ensure work orders and other required documentation are created and properly scoped and reported for all work within the team
Utilize regional contracting strategies, including supply of parts and vendor services, to ensure required resources are available to complete the work as per the plans
Act as the area contact to all other departments for short term planning issues, resource availability and updates / progress reports for all major area work
Act as a conduit for the team for tracking and documenting ongoing value creation examples from within the area, and entering them ongoing into the CGO value creation tracker
Collaborate and support other Field Work Planners as needed within the region, and across regions when required
Provide regular assessments and reports of work plan completion and variance explains
Work closely with corrosion technicians and other members of the integrated CP team to ensure that costs are properly allocated when work orders are initially produced
Incorporate revisions and ensure accuracy of entity information and maintenance programs that are modified at a local/regional level
Facilitate one-month plan handoff meetings, weekly scheduling meetings, and other impromptu communications meetings as required in support on work management and scheduling activities
Provide first hand monthly support to budget activities, preparation and reporting processes
Periodically facilitate and/or participate in weekly communications meetings in support of ongoing work management activities
Capability and flexibility to respond to time pressure by adjusting work hours to meet critical deadlines
Ability to prioritize and manage numerous competing work requests and expectations simultaneously
Ability to provide and present timely and relevant feedback and or reporting to various stakeholders
Detail oriented with good organizational and planning skills
Working knowledge of computers and related software, including excel and SAP
Application of analytical and reporting skills to communicate work progress and variances
Post-Secondary education in a related field is preferred
Minimum 5 years of experience in cathodic protection systems maintenance is preferred
Solid understanding of the fundamental principles of Maintenance Management and analytical skills supported by use of software applications
Superior MS Office Suite skills and/or Microsoft Project is preferred
SAP experience is considered a key asset

Corrosion Technician Resume Examples & Samples

Two (2) years operations experience or equivalent technical experience. Three (3) years of plant field experience is preferred
Strong organizational/planning skills and a commitment to getting the job done
Strong interpersonal and communications skills and the ability to establish rapport with internal and external customers
Strong analytical skills and ability to interpret technical data with respect to inventory maps
Electrical and mechanical aptitudes in order to maintain corrosion equipment
Experience with PC applications (Word, Excel, etc)
Must have demonstrated skills in decision-making and problem solving

Senior, Corrosion Technician Resume Examples & Samples

Compliance with all associated regulations (TRRC Pipeline Safety Rules and Regulations) which includes the necessary reporting and documentation
Achieve safe operations of the pipelines and facilities
Perform design, installation and maintenance on Cathodic Protection systems
Perform periodic surveys for rectifiers, bonds, and annual pipe to soils
Perform scheduling, maintenance, and treating for internal corrosion control
Minimum 5 year experience related experience with corrosion control
Working knowledge and understanding of corrosion equipment and process
High integrity and self motivated
Good communication, problem solving and physical perceptive skills

Corrosion Technician Resume Examples & Samples

Plan and perform duties such as testing, evaluation and installation of cathodic protection systems to inhibit corrosion on various structures
2+ years of oil and gas field work experience
NACE CP1, CP2, CP3 or CP4 certification
Rectifier training an asset

Nace CP Corrosion Technician Resume Examples & Samples

Assist senior staff in the preparation of survey reports and final job reports
Assemble data for preparation of final client report including service recommendations
Provide maintenance of field test equipment, ensure good operating condition and render minor repairs
Basic NACE Corrosion courses and NACE CP Level 1 certification helpful
2 years related experience required
Basic Operator Qualifications required
OSHA classes required
Must be able to travel to client sites regularly (75% travel, usually only during the week with some weekend travel)

Senior Corrosion Technician Resume Examples & Samples

Monitor construction activities for adherence to design specifications
Gather structure-to-soil potential data, soil measurements and rectifier data
Conduct post installation surveys, complete interference testing and coordinate rectifier output
Work with Engineers in analyzing requirements and the design of appropriate corrosion control measures
Recommend modifications as needed
Work with Engineers in the preparation of survey reports and final job reports
Function as Crew Leader as needed
4+ years of relevant corrosion prevention and cathodic protection experience
4+ years of Oil & Gas field work experience
NACE Cathodic Protection Technician (CP2) Certification
Rectifier training considered an asset

Corrosion Technician Resume Examples & Samples

Provide technical expertise to assess and resolve design, operating and maintenance issues related to corrosion control
Identify and mitigate interference issues
Assist in the design of and maintain cathodic protection systems
Represent Company in PHMSA audits of corrosion control program
Maintain/repair rectifier remote monitoring system
Ability to make informed decisions involving pipeline remediation and repair, coating systems, and corrosion control on pipelines, pump stations and terminals
Excellent interpersonal and communications skills are required to work effectively in a team environment
Must have a minimum NACE Level CP2 Cathodic Protection Technician certification with the expectation to attain NACE Level 2 CP2
Must have a minimum 3-5 years’ experience in pipeline corrosion control
Internal corrosion prevention experience preferred, liquid sampling and coupons
Atmospheric inspection experience preferred
Above/below ground coatings experience preferred
Be subject to call out 24 hours a day, 7 days a week and extended workdays and/or workweeks including overnights stays away from home location
May be required to carry a pager and cell phone, to work a rotating on-call schedule, and is subject to 24-hr/day callout at any time for emergency response
Must be qualified or able to qualify in DOT Operator Qualifications, and to advance individual skills as assigned/required for position within defined deadlines

Transmission Corrosion Technician Resume Examples & Samples

Ability to interact with internal and external clients to receive highly advancedinformation and data
Knowledge and/or experience in department practices and procedures
Ability to solve a range of basic problems

Download Corrosion Technician Resume Sample as Image file