General Engineer Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the general engineer job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

Q Grady

Quinton

Grady

28414 O'Keefe Brooks

Philadelphia

+1 (555) 104 0648

28414 O'Keefe Brooks

Philadelphia

Phone

p +1 (555) 104 0648

Experience Experience

Boston, MA

General Engineer

Boston, MA

Abshire and Sons

Boston, MA

General Engineer

Educational Assistance
Knowledge of support contractor task management regulations, policies, and procedures
Knowledge of safety, security, personnel management, and EEO regulations, practices, and procedures
Performs minor and routine painting, plumbing, electrical wiring and other related maintenance activities using hand tools
Performs other duties as assigned
Provides justification and cost estimates for all changes
Reviews contractors' cost proposals for contemplated changes in work to ensure quality control and adequacy of contractors' operations

Boston, MA

General Engineer, GS

Boston, MA

Sipes, Schimmel and Corkery

Boston, MA

General Engineer, GS

Developing and/or assisting in preparation of Regional Planning DD1391 - Planning Proposals (PP's) and DD 1391 Project Proposal Reports (PPR's) for shore facilities to be built, modified, or repaired in order to support the missions
Conducting investigations of project sites to determine feasibility of proposed new construction projects, verify topography and site data for additions or renovations, determine potential environmental impacts, and identify the condition of the existing structure and other pertinent data
Identifying most economical and efficient procedures for building renovation, design, and construction, including A&E or in-house design and economic alternatives such as third-party financing, leasing etc
Monitoring the status of PACAREA/LANTAREA AC&I projects and helps ensure compatibility between ongoing maintenance projects and future facility use, planned AC&I projects and approved Regional Planning
Supporting the planning, design, construction, alteration, maintenance, repairs, and life cycle of all Real Property assets assigned to the Product Line
Ensuring personnel safety procedures are being employed, and that facilities/assets are both fire and building safety code compliant
Serving as a critical communications link between the SILC and unit customers/stakeholders to disseminate policy and/or align with strategic goals of the operational commanders in the field

present

New York, NY

Interdisciplinary General Engineer

New York, NY

Jacobson, Cole and Anderson

present

New York, NY

Interdisciplinary General Engineer

present

Position is subject to background investigation
Performs daily inspection of job sites to assure work is performed according to plans/specifications
Collaborating with other professionals on efforts to improve engineering and manufacturing quality performance
Provides technical oversight and evaluation concerning all engineering disciplines as they pertain to all project work
This position may be designated as an acquisition position covered by the Acquisition Professional Development Program (APDP)
Acting as Project Manager in overseeing all aspects of Architect Engineer (A&E) contracts assigned for the preparation of plans or studies
Developing correspondence for higher authority signature with regard to specific project planning and review issues

Education Education

Bachelor’s Degree in Engineering Technology

University of Illinois at Chicago

Bachelor’s Degree in Engineering Technology

Skills Skills

Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies
Candidate shall have 10-15 years of experience with one or more areas of Combat Systems, Topside Non-Propulsion Systems, Aircraft Launch and Recovery (ALRE) Systems, Power and Lighting Systems, Auxiliary Cooling, Ventilation and other Mechanical, Electrical, Structural components
Knowledge of multi-disciplinary professional engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment
Strong initiative characteristics and interpersonal skills, including ability to write detailed reports and effectively prepare and give presentations
Strong knowledge of CVN68 Class Aircraft Carrier maintenance and configuration controls
Experience interfacing with naval organizations and basic knowledge of their functional structure is necessary
Ability to devise and evaluate criteria, parameters, characteristics, and interrelationships for design approaches; to assess the impact of new technology on current systems and processes; and to gather, assemble, and analyze facts, form conclusions, devise and recommend solutions to problems
Skill in preparing design concepts and ability to convey ideas and formulate working drawings using CADD, GIS, and project management/scheduling software programs such as MS Project and Primavera
Skill in evaluating state-of-the-art scientific and environmental/engineering technologies and incorporating into the planning, design, operation, maintenance, repair, and upgrade of installation natural and built infrastructure
Knowledge of the principles of planning and project management; standard acquisition regulations, practices, and procedures; and other engineering disciplines used in support of sustainment, modification, and maintenance programs

Create a Resume in Minutes

15 General Engineer resume templates

Read our complete resume writing guides

General Engineer Resume Examples & Samples

(5%) Travel is required
Experience in risk management and engineering principles and practices as they relate to protection of physical facilities which involve critical safety impacts
Experience reviewing and analyzing engineering designs/projects and/or construction proposals/specifications for compliance with procedural or regulatory requirements or other technical standards
Experience applying engineering concepts, principles, and practices in order to develop and implement policies and/or procedures
Experience with assessing the results of inspections and enforcement performance of operators of physical facilities
Experience with assessing the results of the overall safety performance of operators of physical facilities
Experience inspecting physical facilities for compliance with Federal safety requirements involving critical safety impacts
Experience writing Federal safety violations against operators of physical facilities which involve critical safety impacts

Senior General Engineer, GS Resume Examples & Samples

Up to 30%
Experience analyzing, evaluating and proposing recommendations to engineering and project management problems, and presenting the findings to other employees or senior management officials
Experience performing program analysis and business process improvements
Experience analyzing, evaluating and proposing recommendations to engineering problems, and presenting the findings to other employees or senior management officials

General Engineer, GS Resume Examples & Samples

Some travel will be required
Experience performing engineering projects or portions of large complex projects such conducting investigations into alleged safety defects in motor vehicles and motor vehicle equipment
Experience assessing the effects of system failures on the performance of vehicle control systems
Experience analyzing and evaluating the manufacturing design, operation, diagnostics, and potential failures within motor vehicle, components and equipment

General Engineer Resume Examples & Samples

This position involves frequent travel up to 50% of the time
Experience conducting safety program reviews and engineering analyses and evaluations of natural gas or hazardous liquid pipeline safety regulations deficiencies
Experience reviewing design specifications for pipeline systems
Experience providing technical determinations, and resolutions of compliance issues arising from pipeline safety enforcement inspections

General Engineer GS Resume Examples & Samples

Experience planning, initiating, and working on mechanical, electrical, and/or engineering programs
Experience writing and editing engineering test reports
Professional registration as an engineer

General Engineer Resume Examples & Samples

*This vacancy has been amended to extend the closing date to 10/11/2016 ***
Grade point average of 2.9 of a possible of 4.0 or its equivalent for all courses completed at time of application or during last two years of undergraduate curriculum; or
Grade point average of 3.5 of a possible 4.0 or equivalent for all courses completed in a qualifying major field of study at time of application or during last two years of undergraduate curriculum; or
Election to membership in a national honorary society (other than freshman society) that meets the requirements of the Association of College Honor Societies

General Engineer GS Resume Examples & Samples

Experience performing engineering projects or portions of large projects such as conducting investigations into alleged safety defects in motor vehicles and motor vehicle equipment in trucks, trailers, RV’s and buses
Experience participating in the investigation of allegations of safety defects received from the general public, consumer interest groups, local, state, and other sources
Experience analyzing and evaluating the manufacturing design, operation, diagnostics, and potential failures within motor vehicles, components, and equipment
Experience applying engineering principles and practices to identify safety defects within medium and heavy duty vehicles, trucks, trailers, RV’s, and buses

General Engineer Resume Examples & Samples

Skill in managing multidisciplinary aircraft technology research, engineering and development (RE&D) projects that will reduce fuel burn, emissions and noise
Skill in using modeling tools to assess the environmental benefits of aircraft technologies to reduce fuel burn, emissions and noise
IMPORTANT: Ensure that your work experience supports your Knowledge, Skills and Abilities (KSA), and Other Factors answers. Your answers and associated work experience will be evaluated further to validate whether the answers that you selected are appropriate

General Engineer Resume Examples & Samples

Performs assignments in areas where engineering precedents are incomplete, lacking or require broad experience. ; 30
May serve as an expert for organization in a specific area or responsibility. ; 10
Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction

General Engineer Resume Examples & Samples

This position requires frequent travel
Experience in engineering design, safety, or regulatory work that includes researching, analyzing, compiling data or regulatory information, documenting findings and recommending modification in program/project procedures or specifications based upon results
Experience creating or reviewing engineering design and/or construction proposals/specifications for compliance with procedural, regulatory or related requirements

Interdisciplinary General Engineer Resume Examples & Samples

This position requires frequent travel 50% of the time or greater
Experience in utilizing various engineering concepts, principles, and practices including the design and construct of gas and liquid pipeline failures and structure
Experience analyzing a range of pipeline transportation policies in order to resolve problems, draw conclusions, and develop recommendations to improve program operations, program effectiveness, and to meet program objectives

Interdis General Engineer Resume Examples & Samples

Experience in professional engineering or physical science disciplines researching, analyzing, and compiling data or regulatory information and making recommendations
Experience in professional engineering or physical science disciplines reviewing the design, construction, operation, and failure analysis of gas and liquid pipelines
Successful completion of a professional engineering degree at an accredited university or college

Interdis General Engineer Resume Examples & Samples

Experience in engineering or physical science disciplines concerning the design, construction, operation, maintenance and repair, integrity management, and failure analysis of gas and liquid pipelines
Experience in conducting and/or participating in special investigations or projects to improve pipeline transportation safety
Experience in conducting and/or participating in special investigations or project to improve pipeline transportation safety
Experience in risk management, pipeline integrity management, and management systems principles and practices as they relate to protection of physical facilities and structures with critical environmental and safety impact

General Engineer Resume Examples & Samples

School or Program Name
Degree/Level Attained
Major
Minor

General Engineer Resume Examples & Samples

***
Professional registration - Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions
Written Test - Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination
Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Obtain and maintain a top secret clearance. Completion of a single scope background investigation is required before appointment. For more information visitOPS Myth buster Page
Submit to a drug test prior to your appointment and random drug testing while you occupy the position
Submit to a polygraph examination prior to your appointment
Work in an office environment, lab operations center, rooftops, airports, outdoor fields and test ranges, and various buildings where equipment is located; work may involve extensive standing, walking, bending, stooping, stretching and ladder climbing is retrieving order to maneuver rough terrain; clinic, out, on profound machinery, weapons and vehicles; and require lift heavy items up to 75lbs
Perform work in close quarters or confined spaces, and respond to urgent or emergency conditions
Work in sites where exposure to materials may require special safety precautions and may need to be performed outdoors in a variety of weather conditions at various times of day

General Engineer Resume Examples & Samples

1-2 trips per year
Professional registration- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Boards eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions
Written Test- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico
Applicants who have passed the FE examination and have completed all the requirements for either (a) a Bachelors degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A
Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the FE examination
Specified academic courses -Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A
Related curriculum -Successful completion of a curriculum leading to a bachelors degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

General Engineer Resume Examples & Samples

Candidate shall have 10-15 years of experience with one or more areas of Combat Systems, Topside Non-Propulsion Systems, Aircraft Launch and Recovery (ALRE) Systems, Power and Lighting Systems, Auxiliary Cooling, Ventilation and other Mechanical, Electrical, Structural components
Knowledge of U.S. Navy ship systems and/or prior Navy shipboard maintenance experience is necessary
Knowledge of Navy Standard Items and/or GSO requirements, as well as, Navy and commercial Shipbuilding Specifications
Good understanding of navy and commercial valves, piping, structural specifications, electrical specifications, welding procedures, technical requirements, material specifications, material procurement and navy maintenance procedures
Strong initiative characteristics and interpersonal skills, including ability to write detailed reports and effectively prepare and give presentations
Strong knowledge of CVN68 Class Aircraft Carrier maintenance and configuration controls
Experience interfacing with naval organizations and basic knowledge of their functional structure is necessary
Experience in online content management system and advanced capabilities with Microsoft Office Suite® (Word, Excel, Project and PowerPoint)
Experience with a Professional drawing/ dimensioning software or 3D Product Modeling System such as AutoCad, CATIA or Inventor is a plus
Possess strong oral and written communication skills
Must be detail-oriented and a self-starter with the capability to perform at a fast-paced, high-level
Must be able to pass a drug screening and background check prior to hiring

General Engineer, GS Resume Examples & Samples

Experience leading and coordinating technology and/or research projects in at least one of the following areas: systems engineering, cybersecurity, certification testing, or radio communications
Experience communicating project results both in verbal and written form to management
Experience leading and coordinating technology and/or research projects in at least two of the following areas: systems engineering, cybersecurity, certification testing, or radio communications
Experience communicating program recommendations and guidance both in verbal and written form to senior executives

General Engineer, GS Resume Examples & Samples

Experience applying engineering design and construction principles and procedures related to public works construction projects including costs of alternate construction techniques
Experience communicating technical ideas in writing, preparing technical reports and presenting the contents to management
Experience addressing a range of problems on multi-million dollar public works construction projects
Experience extending or modifying traditional engineering options
Experience providing engineering advice on project development or studies
Experience providing oversight to others on engineering concepts, principles and methods
Experience preparing comprehensive reports, evaluations, and summaries of project results/outcomes and presenting those findings

General Engineer Resume Examples & Samples

Experience managing and coordinating standards, orders, and operating procedures related to aeronautical databases containing airport infrastructure data
Experience presenting technical information to audiences in meetings, presentations, and/or briefings; and/or
Experience analyzing and coordinating the review of airspace issues including potential obstructions and ability to provide training in airspace analysis procedures and policy to personnel
Qualified applicants must clearly demonstrate in their work history at least 1 of the 3 experience requirements listed above.**
Those who fail to demonstrate possession of any of the above criteria AND who do not provide the required documentation will receive no further consideration for this position.*

General Engineer, GS Resume Examples & Samples

Experience in project management including planning, developing and evaluating research projects
Experience applying statistical analysis
Experience using computers or microprocessors for simulation or engineering analyses
Experience with Intelligent Transportation Systems (ITS)
Experience designing, testing, commissioning, or project management of train control systems or grade crossing protection systems
Experience designing, testing, commissioning, or project management of communication systems for the rail industry
Experience in engineering design and analysis methods pertinent to assessment of reliability and safety issues related to train control systems, railroad operating rules, mechanical equipment, and rail integrity
Experience planning and/or directing engineering programs or projects involving railroad signals, train control, and level crossings systems, subsystems, or related components
Experience leading or participating in industry and/or government teams addressing railroad related issues

General Engineer Resume Examples & Samples

Serving as a Test Lead overseeing a portfolio of test and evaluation projects including those supporting major security technology procurement activities
Serving as a chair for data authentication groups consisting of multidisciplinary teams established to ensure the data obtained during testing is complete, accurate, consistent and representative of event activities
Serving as a chair for working groups and Integrated Project Teams (IPTs) such as the System Evaluation Teams established to evaluate systems or capabilities effectiveness and suitability subject to the acquisition review process as described in the Department of Homeland Security Acquisition Directive 102
Managing contract support resources, field/laboratory activities, and coordinating with other government and industry stakeholders involved in the development and implementation of tests (e.g. test plan, integrated test schedule, test procedures, test reports, site coordination) ensuring test program completion
Resolving problems in support of the test program, significant events, and milestones by anticipating major issues, developing mitigation strategies and coordinating resources to enact resolution
Identifying and assessing relative risk of shortfalls between current test capabilities and future needs
Position requires substantial travel
Specified academic courses-Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A
Related curriculum-Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

General Engineer, GS Resume Examples & Samples

Experience conducting reviews, testing, evaluation, and reporting of test results of one or more of the following: motor vehicles,motor vehicle equipment, or other complex mechanical systems
Experience writing and editing engineering test reports and test procedures
Demonstrated ability to articulate technical information clearly, efficiently, and persuasively in both oral and written form
Experience conducting investigations to determine root cause analysis
Experience using problem solving techniques
Experience leading engineering projects including use of planning tools, risk management, stakeholder management, effective communication, resource management
TO QUALIFY FOR THE GS-13 On Experience,you must have one year of specialized experience equal or equivalent to the experience required to qualify for the GS-12 as well as the following
Experience stated on resume directly applies to work performed in or in support of the motor vehicle or motor vehicle equipment industries

General Engineer Resume Examples & Samples

Less than 25% travel
Experience analyzing, interpreting, evaluating and proposing recommendations to engineering problems, and presenting the findings to other employees or senior management officials
Experience providing technical guidance on the design, construction, operation, and maintenance of transit systems
Experience applying oversight principles, practices, concepts, and operational elements as applied in public transit systems
Experience in strategic planning and strategic analysis

General Engineer, GS Resume Examples & Samples

Experience conducting reviews, examinations or testing of motor vehicles and equipment, or the testing of other mechanical systems and the evaluation and reporting of test results
Experience in using various problem solving techniques
Experience stated directly applies to work performed in the motor vehicle or motor vehicle equipment industries

General Engineer Resume Examples & Samples

3-4 times a year (approximately 20 nights per year)
Ensuring deliverable products are consistent with engineering specifications and customer requirements; AND
Collaborating with other professionals on efforts to improve engineering and manufacturing quality performance; and investigating, analyzing, and correcting adverse quality trends or conditions
Collaborating with other professionals on efforts to improve engineering and manufacturing quality performance

Senior.general Engineer Resume Examples & Samples

Associate's degree in Electronics, Technology or other related technical field
7+ yrs engineering/systems experience or 2 yrs General Engineer II experience
Strong knowledge of engineering fundamentals, HVAC concepts, programming, and business operations
Good understanding of job financial reports along with experience as a project manager

General Engineer Resume Examples & Samples

Performs engineering assignments while exercising independent discretion under the guidance of an experienced engineer. (e.g. Collect data, perform complex analysis, interpret results, draw conclusions, and clearly present a recommendation to management)
Performs engineering tasks associated with large projects or a number of small projects. (e.g. Analyze and interpret the results of complex power flows and perform complex engineering tests, and analyze non-specific and ambiguous results)
May direct the engineering tasks associated with a large project or a number of small projects (e.g. Verify and validate studies, blueprints, or designs against accepted engineering principles and practices. Design high voltage transmission and distribution circuits, meeting all engineering standards and criteria)
Participates on teams and may lead teams

General Engineer Resume Examples & Samples

Control Number
464308500
5A-AFPC-1914867-893342-AMH
Work may occasionally require travel away from the normal duty station on military and commercial aircraft
Professional knowledge of multi-discipline engineering concepts, principles, practices, techniques, and methods and familiarity with architecture standard concepts, principles, and practices
Knowledge of program planning and budgeting cycles, financial control and budget systems, and management; and of work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non- appropriated funds
Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions
Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders
Ability to analyze, interpret, and apply rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions; and to plan, conduct, and record site/facility surveys and inspections
Ability to plan and organize work and coordinate with other engineering disciplines and architects; and to communicate effectively both orally and in writing and maintain good working relations
Resume - If your resume includes a photograph or other inappropriate material or content, you will not be considered for this vacancy. Your resume may be submitted in any format. For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.e., hour per week and month/year to month/year or month/year to present). Resumes that do not contain this information may be marked as insufficient and applicants may not receive consideration for this position

General Engineer Resume Examples & Samples

464208600
5C-AFPC-1913924-878926-TYH
As a professional engineer, performs work in the application of multiple engineering disciplines to support the design, development, procurement, production, testing, evaluation, sustainment or operational maintenance of an AF or DoD-level major system with specialized applications
Represents the organization with a variety of installation and functional are organizations
Knowledge of a wide range of advanced multidisciplinary professional engineering concepts, principles, practices, standards, methods, techniques, materials, equipment, and of system engineering and efforts required to achieve and preserve operational safety, suitability, and effectiveness (OSS&E) in systems or end-items
Knowledge of the mission, roles, functions, organizational structure, and operation of the organizations that govern, interface with, and/or influence systems acquisition, development, test and/or sustainment; and knowledge of planning, programming, and budgeting cycles, financial systems, and restrictions on expenditure of funds
Knowledge of and skill in evaluating state-of-the-art and advancements in theory, application, technology, and policy affecting systems being developed, and in planning, organizing, and directing the functions and staff in critical aspects of development, production, sustainment, test, and/or support of systems, subsystems, or equipment
Knowledge of safety, security, personnel management, and EEO regulations, practices, and procedures
Ability to plan, organize, and direct the functions and mentor, motivate, and appraise the staff of an organization through subordinate supervisors as well as analyze, plan, and adjust work operations of one or more organizational segments to meet program requirements and objectives within available resources
This position may be designated as an acquisition position covered by the Acquisition Professional Development Program (APDP)

General Engineer Resume Examples & Samples

Complete Resume
Complete Assessment Questionnaire. View Occupational Questionnaire
*You are encouraged to . Applying online will allow you to review and track the status of your application.***
KNOWLEDGE OF ENERGY PROGRAM MANAGEMENT, ENERGY ENGINEERING ENERGY STRATEGIC PLANNING, PROJECT EXECUTION
SKILL IN ENERGY CONSERVATION, ENERGY DATA MANGAGMENTAND ENERGY TRAINING
ABLITY TO PROVIDE TECHNICAL EXPERTISE TO SENIOR OFFICIALS REGARDING ENERGY PROGRAM

Student Trainee General Engineer Resume Examples & Samples

Must be enrolled or accepted for enrollment in an accredited college or university (must provide transcripts or proof of enrollment)
Knowledge of basic occupational theory, principles, concepts, and practices involved in engineering; to assist with studies and the modification of standard practices
Skill in applying basic occupational theory, principles, concepts, and practices sufficient to perform student trainee assignments
Ability to follow instructions and guidance to complete assigned tasks and communicate information to others in oral or written format
Ability to learn and apply basic investigative techniques to accomplish work in the subject matter field
Ability to gather and analyze basic facts, information, and data; and draw conclusions
A complete Occupational Questionnaire
DD214 or “Certification” of service (Document must reflect character of service)
Eligibility Documentation, SF50, Proof of Disability, Certification of Job Readiness, etc

General Engineer Resume Examples & Samples

KNOWLEDGE OF SHIPYARD TESTING PRINCIPLES AND PRACTICES
ABILITY TO APPLY TECHNICAL SPECIFICATIONS AND REQUIREMENTS
KNOWLEDGE OF SHIPBOARD TEST PLANNING, TEST EXECUTION, AND TEST PROCEDURES DURING SHIP MODERNIZATION, REPAIR AND OVERHAUL

Interdisciplinary General Engineer Resume Examples & Samples

US Citizens
Current federal employees who hold or held a non-temporary career or career-conditional appointment in the competitive service
Displaced federal employees (CTAP/ICTAP) in the local commuting area
Persons eligible for non-competitive appointment under Special hiring authorities click here or Interchange Agreement view here
Veterans' preference eligible or veterans who have been separated from the Armed forces under honorable conditions after substantially completing at least three consecutive years of active duty( view information on certain veterans eligibilities under the Veterans Employment Opportunities Act, VEOA)
For definitions and terms found in this announcement, please click here
Occasional Travel
Overnight travel of 1-5 nights per month may be required

General Engineer Resume Examples & Samples

465070600
8F-AFPC-1904658-850264-LCG
Knowledge of the principles, concepts, and theories of engineering and the standard practices, methods, and techniques of the occupation sufficient to perform difficult, but well precedented assignments
Knowledge of analysis, evaluation, fact-finding, and investigative techniques in order to gather data, identify significant factors, and recommend a solution from a number of possible alternatives
Knowledge of the occupation to perform studies and prepare reports, documentation, and correspondence to communicate factual and procedural information clearly
Skill in applying the principles, concepts, and practices of the occupation sufficient to perform moderately difficult assignments
Ability to communicate clearly, concisely, and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers and management
Ability to learn and apply analytical investigative techniques to accomplish work in the subject-matter field
The employee must be able obtain and maintain the appropriate security clearance

General Engineer Resume Examples & Samples

Complete assessment questionnaire https://apply.usastaffing.gov/ViewQuestionnaire/10006179
ENGINEERING PROJECT MANAGEMENT
PROBLEM SOLVING
WRITTEN COMMUNICATION

General Engineer Resume Examples & Samples

Experience working with several engineering disciplines such as structural, electrical, mechanical, industrial, civil or nuclear obtained through a bachelor's degree program or experience in the field
Experience utilizing engineering principles, methods and procedures and apply them to perform the full range of engineering duties for planning, analysis and improvement of shipyard operations
Experience utilizing engineering technical manuals, military standards and specifications, technical reports, engineering handbooks, textbooks, drawings, agency policy and standard practices
A security clearance is a requirement of this position
Selectee will be required to successfully complete a pre-appointment physical examination
Knowledge of Concepts, Principles, Techniques, and Practices of Engineering
Ability to Provide Technical Assistance
Knowledge of Procurement

General Engineer Resume Examples & Samples

Travel is dependent on position description and availability of funding
A Top Secret security clearance is a requirement of this position. Must be able to obtain an interim and/or final (e.g. Top Secret) security clearance prior to entrance on duty AND must be able to maintain the required level of clearance while employed in the subject position. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal
Successful completion of a pre-employment drug test is required. A tentative offer of employment will be rescinded if the applicant fails to report to the scheduled drug test appointment. Incumbents of drug testing designated positions will be subject to random testing. Drug test results will be provided to the employing activity/command
Work is performed primarily in an engineering office environment. Some work is at AEGIS sites and requires some travel to off-site meetings and conferences, occasional shipboard visits and at-sea travel aboard ships during shipboard testing in foreign countries
Active duty military members MAY apply under this announcement. If selected, appointment eligibility requirements must be met prior to the effective date of appointment
Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326
PROFESSIONAL ENGINEERING CONCEPTS AND PRACTICES
FOREIGN MILITARY SALES PROGRAM ANALYSIS
FOREIGN MILITARY SALES PROGRAM MANAGEMENT
ADVISORY SERVICES

General Engineer Welding Resume Examples & Samples

One year of specialized experience equivalent to the next lower grade (GS-05) in the Federal service or equivalent public or private sector experience as a Professional Engineer utilizing basic welding engineering techniques, procedures and methods to complete engineering assignments
OR - Education may substitute experience as follows: (must be completed by entrance on duty) Completion of one year (or at least 18 semester hours) of graduate level education that provided you with the knowledge, skills, and abilities to perform professional engineering work
OR - Successful completion of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering
OR - An equivalent combination of specialized experience and education described above
OR - SUPERIOR ACADEMIC ACHIEVEMENT: based on (1) class standing; (2) grade-point average; or (3) honor society membership
Class standing – applicants must be in the upper third of graduating class in the college or university attending based on courses completed
Grade-point average (G.P.A) – applicants must have a grade-point average of
Election to membership in a national scholastic honor society as listed by the Association of College Honor Societies. Membership in a freshman honor society cannot be used to meet the requirements of this provision
One year of specialized experience equivalent to the next lower grade (GS-07) in the Federal service or equivalent public or private sector experience as a Professional Engineer in support of welding services for the repair, modification, or overhaul of vessels
OR - Education may substitute experience as follows: (must be completed by entrance on duty) a master's or equivalent graduate degree or 2 years of progressively higher level graduate education leading to a master's degree that provided the knowledge, skills, and abilities required to perform professional engineering work
OR - an equivalent combination of specialized experience as described in 4.A. above and education as described in 4.B above
One year of specialized experience equivalent to the next lower grade (GS-09) in the Federal service or equivalent public or private sector experience as a Professional Engineer identifying or developing resolutions in support of welding services for repair, modification, or overhaul of vessels
OR - Education may substitute experience as follows: (must be completed by entrance on duty) a Ph.D. or equivalent doctoral degree or three years of progressively higher level graduate education leading to a Ph.D. degree that provided the knowledge, skills, and abilities required to perform professional engineering work

General Engineer Resume Examples & Samples

Primary focal point for the RIO Risk Management activities in the PMO
Provides technical leadership for Enterprise, Portfolio as well as Programmatic risk activities across and beyond the PMO. Provides guidance to Risk Managers for work accomplishment
Provides guidance to support contractors in the performing of risk tasks
Plans and executes the PMO Risk Management Board meetings
Engages in test activities, interfaces with stakeholders, and leads cross-organizational teams. Reprioritizes ongoing work as required to support emergent priorities, coordinating with internal and external stakeholders
Works closely with other Information System Security (ISS), and Safety team members located in the Washington, DC area, in providing support for integrating the Risk, Issues and Opportunities in assessing the ISS Plan of Action Milestones (POAM’s) activities
Manages updates to the Active Risk Management (ARM) tool Configuration Management Plan (CMP)
Conducts RIO Process and ARM familiarization training for newly assigned RIO Managers. Updates all RIO Management Training courses due to updates to RMP
Contacts are routinely internal and external to AJM and include Contracting Officers, Contracting Officer Representatives, senior FAA management and representatives from industry. The incumbent presents briefings to obtain consensus/approval on policies and coordinates significant technical matters with representatives of external organizations
Provides guidance to lower-level staff to solve difficult technical issues. Resolves all but unique technical problems without the intervention of management or a more experienced engineer. Develops plans, techniques , and policies to address current or anticipated problems and issues. Works with senior management to jointly solve problems
Work is reviewed rarely, typically though status reports and at project completion, to ensure technical compliance and alignment with the requirements of the project or other work activity

General Engineer Resume Examples & Samples

Leads and performs assignments in specialized areas requiring extensive engineering expertise. 25%
Leads and performs engineering tasks associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas. 30%
Evaluates, develops, implements and leads projects that have significant financial and operational impact. 10%
Participates in department planning, provide budget recommendations and monitor performance for the accomplishment of committed results. 5%
Performs assignments while acting independently, and may lead multi-discipline teams. 5%
Serves as an expert in specialized area. 5%
Acts as an expert witness or provide expert opinions as required. 5%
Provides recommendations and implements action plans to improve performance and cost effectiveness. 5%
Provides training and/or guidance to others. 5%
Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest. 5%
Thorough knowledge and experience in unique areas of engineering expertise
Detailed knowledge of applicable standards, codes methods, and practices unique to areas of expertise
Ability to apply advanced engineering principles to identify and resolve complex issues
Minimum of three related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OR
Lead Member of a recognized industry committee OR
Professional Engineer’s License (2), advanced technical degree, MBA or Project Management Certification

General Engineer, GS Resume Examples & Samples

Professional registration-- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions
Written Test-- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico
Related curriculum-- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

General Engineer Resume Examples & Samples

Ability to design, analyze, and review engineering projects
Ability to provide professional engineering/architectural advice to peers, subordinates, or non-professional administrators or managers
Ability to perform construction administration work
Ability to perform maintenance administration work

General Engineer Resume Examples & Samples

Professional Knowledge of Architectural, Civil, Structural, Mechanical, and Electrical Engineering
Knowledge of Review and Evaluation Techniques and Contract Specifications as it relates to a design
Knowledge and ability to apply various engineering codes and standards related to engineering design
Ability to manage design and construction projects in a health care environment
Ability to communicate both orally and in writing with internal and external customers

General Engineer Resume Examples & Samples

Provides professional engineering services (including design calculations) related to the layout, design, development, and completion of construction projects, and non-recurring maintenance projects
Conducts continual program reviews and makes recommendations to the Chief, Engineering Service for improvements and modifications
Serves as a resource of engineering theories and applications for other staff
Is responsible for inspection of projects during construction, preparing necessary reports, checking blueprints and specifications, and for taking corrective action as indicated
Prepares contract drawings, sketches and as-built drawings in AutoCAD
Ensures that all standards and regulations are followed in the designs as well as assuring the competency of the design
Reviews and approves/disapproves material and equipment submittals
Prepares necessary documents for progress reports, partial payments, change orders, etc.; and
Acts as liaison with architects/engineers, supervising the design process which includes coordinating work between hospital personnel and design firms

General Engineer Resume Examples & Samples

Receives generalized information (including budget, finalized project goals and timeframes) regarding new construction or renovation projects identified as approved for design and/or construction and ensures the projects are properly developed through the existing conditions, design and construction phases within VACO, VISN, and Medical Center established timeframes
May be required to provide engineering support to any medical center within VISN 1 (VA New England Healthcare System) as assigned by the Chief, Engineering Service
Uses expert knowledge of construction, engineering concepts and strategies to guide assigned projects through the phases of genesis, design firm procurement, existing condition evaluation, conceptual planning, construction document formulation, construction contract procurement, and implementation of the construction activities plan and confirmation of final product
Analyzes continuing problems with contractors, designers, customers, and contracting support and takes necessary corrective action
Participates in major engineering decisions involving the VA Boston Healthcare System concerning issues of national and local concern for environmental and energy/natural resources sustainability
Meets the needs of customers while supporting VA missions
Selectee may be required to work at any Boston Healthcare System campus, as needed
Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional
Knowledge in the principles, practices, methods, theories, concepts, and techniques of the engineering profession
Knowledge of the branches of engineering as they relate to a General and Surgical Medical Center
Knowledge of various regulations., i.e., JCAHO, OSHA, DEQE, FDA, etc
Ability to perform effectively and independently under the pressure of an active, expanding, and complex construction renovation program
Ability to independently and/or as a team member analyze the engineering requirements for a job, isolate essential features of problems, develop new techniques, and analyze the proposals of others

General Engineer Resume Examples & Samples

Special studies, developing, designing, estimating, coordinating and specification writing
Supervising the construction phases of building construction and renovations, remodeling, equipment installations and maintenance projects
Knowledgeable in the use of Auto-cad, the internet/intranet, and all Microsoft office software applications as tools to perform daily tasks
Provides technical oversight and evaluation concerning all engineering disciplines as they pertain to project work of all types
Prepares estimates of all types-budget, preliminary and detailed as they apply to the appropriate state of development of each project
Performs construction site inspections to ensure compliance with the contract documents and to monitor work progress of both contractors and station personnel
Reviews drawings and specification prepared by architects, engineers and/or Design Section technicians on the basis of scope, completeness and correctness
Makes decisions in an expeditious and accurate manner, displaying an atmosphere of professionalism at all times
Works independently
*Recruitment/Relocation incentive has been authorized for highly qualified individuals***
Occassional travel to CBOCs for facility project requirements
Professional registration -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions
Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico
Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of a engineering program as described in paragraph A
Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

General Engineer Resume Examples & Samples

College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following
Reading and interpreting drawings and blueprints
Developing plans and specifications for various construction and maintenance projects
Using commercial estimating guides, manufacturers' literature, equipment catalogs and existing drawings (hard copies and electronic)
Providing solutions to engineering problems in the field
Organizing, analyzing, interpreting, and evaluating scientific data in the solution of engineering problems

General Engineer Resume Examples & Samples

Travel between and reporting to all Seattle campus, American Lake campus, Magnolia campus as well to outlying Community Based Outpatient Clinics required
Professional registration - Current registration as a professional engineer by an State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration
Written Test - Evidence of having successfully passed the Engineering-in-Training (EIT) examination, or the written test required for professional registration, which is administrated by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam and Puerto Rico. Applicants who have passed the EIT Examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences,
Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience

General Engineer Resume Examples & Samples

Implementing energy conservation initiatives
Preparing and monitoring utility budgets
Ensuring sustainability goals are identified and met during project planning, design and construction
Developing energy conservation projects with architectural and engineering firms
Ensuring design compliance with applicable local, national and VA energy performance regulations
Reviewing construction projects and maintenance activities and providing technical support to ensure sustainable energy aspects
Analyzing and improving utility system energy performance

General Engineer Resume Examples & Samples

Inspects completed work to determine contract compliance, make surveys and writes technical reports on engineering findings, recommending any corrective action needed
Conducts special studies, writes reports, and recommends courses of action
Plans and coordinates construction to minimize impact on the operation of the medical center
Prepares cost estimates, drawings, and specifications
Prepares necessary documents for progress reports, partial payments, change orders, etc
Ensures that all standards and regulations are followed in the designs as well as ensuring the competency of the design
Exercises a high degree of flexibility in adjusting to interruptions, revisions, extensions of project scope, redesigns and other pressures so that a project is finalized without exceeding the deadline; and
) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. (Documentation Required) -OR-
) Specified Academic Courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A. (Transcript Required) -OR-
) Related Curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g. engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be acceptable in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (Transcript Required)

General Engineer Resume Examples & Samples

Up to 25%
Current registration as a professional engineer by any State, the District of Columbia, Guam or Puerto Rico
Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A
Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer sciences, mathematics or hydrology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least one (1) year of professional engineering experience acquired under professional engineering supervision and guidance

General Engineer Resume Examples & Samples

The incumbent serves as a General Engineer responsible for the engineering analysis, development, design of and the preparation of complete plans and specifications for new work and improvements
Assignments include all engineering design phases of complex construction, extension, alteration, demolition, maintenance and repair projects for the Medical Center
Provides technical oversight and evaluation concerning all engineering disciplines as they pertain to all project work
Independently responsible and accountable for determining the action necessary in the development and completion of design projects, coordination of a project staff which may include architects, engineers, engineering technicians, draftsmen, and clerk/typists and review of the final contract documents
Surveys existing job conditions and confers with requesting medical center personnel to determine exact scope of project, phasing, impact on other medical center services and other specific design requirements
Determines how project(s) will impact medical center based on results of a risk assessment that could have a severe impact on patient care
Evaluates and/or recommends the work of architectural/engineering
Performs daily inspection of job sites to assure work is performed according to plans/specifications
Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. (DOCUMENTATION REQUIRED)
Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum. (DOCUMENTATION REQUIRED)
Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. (DOCUMENTATION REQUIRED)
Knowledge of professional engineering principles, practices and methods
Knowledge of resource utilization and management, related to engineering projects
Ability to coordinate and manage a full range of construction projects
Ability to communicate orally, including providing consulting services

General Engineer Resume Examples & Samples

Working knowledge of engineering, construction, cost estimating and project management,
Providing technical resources and consulting
Coordinating progress review for all construction contract procedures
Technical knowledge in several related areas such as civil, electrical, mechanical, architectural, electronic and biomedical engineering
Experience with electrical, plumbing and mechanical plans and drawings,
Working engineering construction project from conception
Ensuring that all construction work is in accordance with design drawings and specifications
Working on design teams, interpreting construction drawings, specifications, and building codes; performing construction estimation and use of computerized drafting equipment
Managing highly complex engineering projects; technical knowledge in several related areas such as civil, electrical, mechanical, architectural, electronic, and biomedical engineering; experience with electrical, plumbing, and mechanical plans and drawings
Primarily responsible for providing technical resources and consulting
Having primary responsibility for coordinating progress review for all construction contract procedures
Overall program responsibility for ensuring that all construction work is in accordance with design drawings and specifications

General Engineer De Resume Examples & Samples

Up to 10% Domestic Travel
AND-
Working with small teams that define and set their own goals and execute together to achieve them
Working with both government agencies and prime contractors
Selected or Not Selected
A copy of your SF-50 “Notification of Personnel Action” documenting your RIF separation, noting your positions, grade level, and duty location, and/or Agency certification of inability to place you through RPL, etc
Any documentation from your agency that shows your current promotion potential
If you are a veteran with preference eligibility and you are claiming 5-points veterans' preference, you must submit a copy of your DD-214 stating disposition of discharge or character of service or other valid proof of eligibility (i.e., statement of service that shows service dates AND character of service). If you are claiming 10-point veterans' preference, you must also submit an SF-15, "Application for 10-Point Veterans' Preference" plus the proof required by that form. For more information on veterans' preference see http://www.opm.gov/staffingPortal/Vetguide.asp#VeteransEmploymentAct1998
Active Duty Service Members-- You must submit a statement of discharge/certification of release or an official written document from the armed forces that certifies you are expected to be discharged or released from active duty service in the armed forces under honorable conditions no later than 120 days from the date the announcement closes. Enlisted Record Briefs and military identification do NOT qualify as official documentation. If the appropriate information is not submitted to confirm the discharge status, dates of service, etc., you will not be considered for this job opportunity under Veteran Preference procedures. To gain access to your DD-214 online please visit http://www.archives.gov/veterans/military-service-records/get-service-records.html
Interagency Career Transition Assistance Plan (ICTAP) and Interagency Career Transition Assistance Plan (ICTAP) documentation if applicable (see other information)
Education. If this position requires proof of higher education, you must submit an unofficial transcript or a list of courses that includes the following information: name of accredited institution, grades earned, completion dates, and quarter and semester hours earned. Special Instructions for Foreign Education: Education completed in foreign colleges or universities must be evaluated in terms of equivalency to that acquired in U.S. colleges and universities. Applicants educated in whole or in part in foreign countries must submit sufficient evidence, including transcripts, to an accredited private organization for an equivalency evaluation of course work and degree. A listing of these accredited organizations can be found on the Department of Education's website. You MUST provide a copy of the letter containing the results of the equivalency evaluation with a course by course listing along with your application. Failure to provide such documentation by the closing date of the announcement will result in lost consideration

General Engineer Resume Examples & Samples

The business travel requirement is 10% or less
Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains
Knowledge of engineering principles and practices
Experience managing construction projects of all types and sizes
Ability to provide Customer Service
Skill in using computer software

General Engineer Map Resume Examples & Samples

Performing trade studies and concept designs
Minimum Qualification Requirement Met or Minimum Qualification Not Met
Eligible (Application Referred to the Selecting Official) or Eligible (Application Not Referred to the Selecting Official); and
A copy of your SF-50 “Notification of Personnel Action”, noting current position, grade level, and duty location
Resume showing relevant experience; cover letter optional. Your resume must indicate your citizenship and if you are registered for Selective Service if you are a male born after 12/31/59. Your resume must include information about your paid and nonpaid work experience related to this position including: job title, duration of employment (mm/dd/yy – mm/dd/yy), hours per week, duties and accomplishments, salary, and your education. For work in the Federal service, please include the grade level for the position/s. Your resume may be used to validate your responses to the scored occupational questionnaire
SF-50, “Notification of Personnel Action: If you are a current or former Federal employee, you must provide the most current Notification of Personnel Action (Form SF-50) that verifies career/career-conditional status, title, series and grade (do not submit an Award SF-50). Also provide the SF-50 that reflects the highest grade level held on a permanent basis or the full performance level of your current position, whichever is higher. Failure to do so will result in an ineligible rating
Veteran’s documentation: If you are requesting consideration under Veterans Employment Opportunity Act (VEOA) or Veterans Readjustment Act (VRA) you must submit a copy of your Member 4 DD-214 stating disposition of discharge or character of service or other valid proof of eligibility (i.e., statement of service that shows service dates AND character of service) and/or any other required supporting documents (VA Letter). http://www.opm.gov/staffingPortal/Vetguide.asp#VeteransEmploymentAct1998
Active Duty Service Members: You must submit a statement of discharge/certification of release or an official written document from the armed forces that certifies you are expected to be discharged or released from active duty service in the armed forces under honorable conditions no later than 120 days from the date the announcement closes. Enlisted Record Briefs and military identification do NOT qualify as official documentation. If the appropriate information is not submitted to confirm the discharge status, dates of service, etc., you will not be considered for this job opportunity under Veteran Preference procedures. To gain access to your DD-214 online please visit http://www.archives.gov/veterans/military-service-records/get-service-records.html
Career Transition Assistance Plan (CTAP) and Interagency Career Transition Assistance Plan (ICTAP) documentation if applicable (see other information)
Documentation supporting eligibility for non-competitive appointment, (severely disabled, eligible veterans, certain military spouses, etc.)

General Engineer Resume Examples & Samples

467956000
Education/Experience Combination - Applicants must possess a combination of education and experience that includes college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following
Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described above
To begin,click to create a USAJOBS account or log in to your existing account. Follow the prompts to select your USAJOBS resume and/or other supporting documents and complete the occupational questionnaire
Click the Submit My Answers to submit your application package
Competency 1 - Knowledge of professional engineering for all types of projects, including mechanical, electrical, and civil
Competency 4 - Ability to perceive, propose, and prepare plans and specifications for projects
Competency 5 - Ability to communicate with people from a wide variety of backgrounds
Competency 6 - Ability to communicate effectively, both orally and in writing
Competency 9 - Skill in Contracting Officers Representative (COR)
Complete and current resume
Responses to the Occupational Questionnaire. (Listed within the Application Manager program when you click on the "" button)
Evidence of your eligibility to apply for this vacancy
Please use this checklist to make sure you have included other documents required for your application, such as a copy of your transcript (if using education to qualify), documentation to support Veterans Preference claims, or ICTAP/CTAP documentation (for displaced Federal employees). You will not be contacted for additional information

General Engineer Resume Examples & Samples

Sonesta Hotels & Other Outlets Discounts
Short Term Disability
Employee Activities & Events

General Engineer Resume Examples & Samples

467968400
8Y-AFPC-1944541-756698-EF
Knowledge of a wide range of multidisciplinary professional engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment to effectively apply advanced engineering theories, principles, and concepts to project development, execution, and advisory services
Knowledge of development engineering methodologies sufficient to apply experimental theories and/or new applications to issues and provide technical advice and direction in support of weapon systems, subsystems, and/or support equipment
Knowledge of systems engineering practices and procedures as they pe1tain to sustainment, modification, logistics, and production management principles, concepts, policies, and systems
Knowledge of the principles of planning and program management; of standard acquisition regulations, practices, and procedures; and of other engineering disciplines used in support of sustainment, modification, and maintenance programs
Ability to devise and evaluate criteria, parameters, characteristics and interrelationships for design approaches; to assess the impact of new technology on current systems and processes; and to gather, assemble, and analyze facts, form conclusions, and devise and recommend solutions to problems
Ability to communicate clearly, concisely and with technical accuracy, both orally and in writing, as well as work in a professional manner with peers, management, contractors, academia, and other agencies
The work requires the incumbent to obtain and maintain the appropriate security clearance – "Top Secret"
This position has been designated as an acquisi5tion position and is covered by the Acquisition Professional Development Program (APDP). Work requires the appropriate APDP certification(s); i.e., Level 2 or 3 in an area such as Test & Evaluation (T&E); Systems Planning, Research, Development and Engineering Systems Engineering (SPRDE-SE); or Systems Planning, Research, Development and Engineering Program Studies

General Engineer Resume Examples & Samples

467973400
644-17-KQ-1944594-BU
1) Ability to demonstrate project management methods and techniques
2) Ability to demonstrate technical engineering competencies for either mechanical, civil, or electrical
3) Ability to be an effective communicator, facilitator and team builder
4) Ability to broker agreements between internal and external stakeholders
5) Ability to demonstrate software application expertise, particularly AutoCAD, MS Project, and databases
6) Knowledge of the disciplines and methods of construction
Click Submit My Answers to submit your application package

General Engineer Resume Examples & Samples

Performs electrical, mechanical, civil, and utility designs/layouts, complete with specifications
Evaluates and/or recommends the work of architectural/engineering (A/E) firms
Reviews A/E drawings for fire, safety, OSHA, and other external reviewing authority standards to assure compliance with all applicable requirements
Shows ingenuity and creative thinking in revising existing systems for different functions as required for new applications, and incorporating new systems
Develops and prepares cost estimates for competitive bidding for a variety of multi-complex construction projects which define types and quantities of equipment, materials, labor costs, overhead, tax, profit, and other costs
Checks and analyzes submitted drawings of contractors for completeness, correctness, and compliance with contract specifications and drawings
Maintains complete, accurate and up-to-date records, plans and specifications of all systems and equipment installed during a project
Coordinates and maintains liaison with organizations having related assignments, other medical centers, other agencies, contractors, utility companies, state and local government authorities, and the general public
Coordinates and conducts project planning meetings
Interacts with state historic preservation societies, state nursing home officials, veterans affairs peer review groups and authorities having jurisdiction such as city and county fire marshals and inspectors of various disciplines for off-site leased/acquired spaces
Participates in final on-site inspection
Performs field surveys and investigations to collect data to determine existing conditions and the extent of construction and repair required to provide services or facilities to meet anticipated needs
Reviews shop drawings, schedules layouts, and inspects all work, workmanship, materials, and equipment installed for quality control and conformance to contract documents
Resolves questions of drawings and specification interpretations in regard to inspection and acceptance
Reviews contractors' cost proposals for contemplated changes in work to ensure quality control and adequacy of contractors' operations
Writes inspection reports, proposal requests, memos, and letters relating to the construction contracts
Initiates written change orders or supplemental agreements
Provides justification and cost estimates for all changes
Coordinates all outages with engineering shop employees, doctors, nurses, service chiefs and management as needed to insure patient care is not adversely impacted; and
Principles, theories, concepts and practices of engineering profession
Technical aspects of the engineering functions

General Engineer Resume Examples & Samples

Prepares correspondence, technical reports, status reports, construction and inspection of projects
Modifies or replaces total systems with dissimilar materials or design that do not resemble the original system
Complete projects such as parking lots, landscaping, electrical modifications, HVAC design changes, architectural modifications, medical equipment changes and various other engineering designs
Makes inspections, consultation with the contractor to resolve complex unforeseen problems
Certifies contractor payrolls in accordance with Davis-Bacon wage rates and rules
Checks and approves/disapproves contractor samples, submittals, shop drawings and material certifications
Reviews the work of architect-engineer firms to ensure compatibility with existing materials and VA guidelines
Keeps abreast of latest engineering technology and materials
Evaluates modifications of equipment and systems to ensure safe operating conditions for the operator and the public
Prepares space survey reports and space requirements
Prepares funding request documents for construction program to include description of work, justification, recurring costs, construction estimates, and close coordination with Medical Center staff

General Engineer Resume Examples & Samples

Performs engineering tasks associated with critical engineering projects or a number of small projects with many complex features
Performs assignments in areas where engineering precedents are incomplete, lacking or require broad experience
Evaluates, develops and implements projects that have moderate financial and operational impact
May serve as an expert for organization in a specific area or responsibility
Minimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OR
Engineer in Training OR

General Engineer Description Resume Examples & Samples

One-year probationary period may be required
Travel, transportation, and moving expenses may be authorized: Yes
Bargaining Unit Position: Yes
Drug Screening Required: No
Recruitment Incentive may be authorized: Yes
Annual Leave for non-federal service authorized: No
Research position: No
Promotion potential: No
Supervisory position: No
Relocation Incentive may be authorized: Yes
Immunizations may be required: Yes
Ability to administer service contracts and develop maintenance tasks/procedures
Knowledge of facility operations and technical systems
Skill in providing engineering support to maintenance and operation staff to enhance building performance

General Engineer Resume Examples & Samples

469273800
Business travel is approximately 10%
Knowledge of Engineering Principles and Practices
Skill in Program Coordination
Written Test --Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college or university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination
Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive)

General Engineer Resume Examples & Samples

469227400
Business travel up to 10%
Knowledge of General Engineering
Knowledge of Facility Operations procedures
Ability to Manage Multiple Projects

General Engineer Resume Examples & Samples

Travel is dependent on position description and available funding
Professional Engineering Disciplines, Concepts, Principles and Practices
Engineering Technical Advisory Services

General Engineer Resume Examples & Samples

469442200
As required by the duties of the position
Written Test-- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college or university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A. Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination
NOTE: Failure to provide transcripts will result in you being rated ineligible for this position
NOTE: If you submit a resume but no questionnaire, you cannot be considered for the position. If you submit a questionnaire but no resume, you cannot be considered for the position. Your application will be appropriately documented and you will be removed from further competition against this announcement
Please ensure you click the Submit My Answers button to submit your application
Assessment Questionnaire
Transcripts: REQUIRED--We accept unofficial transcripts, as long as they contain the applicant's name, the name of the school, the date and degree that was awarded, and the list of classes and credits earned. Transcripts must be received in this office by 11:59PM EST onMonday, May 22, 2017 in order to be considered
Current or former federal employees must provide an SF-50 showing series and grade

General Engineer Resume Examples & Samples

Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum
Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions
Knowledge of architectural concepts, principles, and practices applicable to the full range of duties concerned with the planning, design, renovation, and construction of existing and planned facilities
Knowledge of related disciplines (i.e. landscape architecture, urban and regional planning, environmental, real property, space planning, structural, electrical, mechanical, and civil engineering
Knowledge of Windows-based software including AutoCAD & Arc view, Word, Excel & Access and Global Positioning System (GPS) based computer work
Knowledge of building historical preservation and the ability to interface with Federal, State and Local historical authorities to address CG facility historical issues
Your responses to the online questionnaire
Current or former federal employees, submit a copy of your most recent SF-50, Notice of Personnel Action, that demonstrates your eligibility for consideration, e.g., length of time you have been in your current/highest grade. Examples of appropriate SF-50s include promotions, with-in grade increases. Performance award are not acceptable
If you are claiming special priority selection rights under the Interagency Career Transition Assistance Program (ICTAP), you must submit a copy of your agency notice, most recent performance rating and most recent SF-50, noting your current position, grade level and duty location. If you have never worked for the federal government, you are not ICTAP eligible. To be considered eligible, you must be placed in the well-qualified category for this position. Please see ICTAP eligibility
If you are requesting consideration under Executive Order 13473, you must submit proof of eligibility. At a minimum to confirm eligibility for purposes of appointment based on relocation under these provisions a spouse of a service member must provide a copy of the marriage certificate or other documentation verifying marriage and a copy of the military PCS orders assigning the service member to a certain post. The PCS orders must state the member's spouse was authorized on the military orders. Proof of eligibility based on disability and deaths resulting from active duty service is outlined here

General Engineer Resume Examples & Samples

469462500
Travel may be required
Advises on engineering solutions associated with Fuels Sustainment, Restoration and Modernization (SRM), Reoccurring Maintenance and Minor Repair (RMMR), and Military Constructions (MILCON) projects
Evaluates the condition of Petroleum, Oil, Lubricants (POL) infrastructure to identify deficiencies
Presents proposed plans, specifications, timelines, and cost estimates related to engineering projects
Knowledge of advanced concepts, theories principles, practices, and techniques of engineering
Knowledge of petroleum facility systems
Knowledge of engineering project management
Completed Resume – (Required) For more information click on "How To Prepare A Resume"
Completed Questionnaire – (Required)
Other supporting documentation as required. Please see the required documents section to determine if there are other documents you are required to submit
Click Application Status within our profile to expand your application
Click the more information link under the Application Status column for this position. You will be routed to Application Manager
Click the Vacancy ID link to open the Application package. The Details tab displays by default. The Details tab displays comprehensive information about the selected Application Package including: assessment(s) and the status, supporting documents and their status, correspondence sent to you by the hiring agency, and your application processing status
For additional information, see Details Tab and Checklist Tab
If you have completed the application process online and were unable to upload your supporting documents, complete this cover page http://staffing.opm.gov/pdf/usascover.pdf using the following Vacancy ID 1956223 and fax your documents to 1-478-757-3144

General Engineer Resume Examples & Samples

Qualified: Applicants possessing experience that meets the minimum qualifications of the position and demonstrate basic proficiency in most of the critical competencies, including all SPFs and appropriate QRFs as determined by the job analysis
If you are qualifying based on education, submit a legible copy of your unofficial college transcript from an accredited college/university. The transcript copy must reflect the college/university name and/or logo. Applicants are highly encouraged to proactively order a copy of their official transcripts to be delivered to their home address so transcripts will be readily available if selected. If selected, you will be required to provide official transcripts prior to establishing your start date. Foreign education completed in foreign colleges or universities may be used to meet federal qualification requirements if you can show that your foreign education is comparable to education received in accredited institutions in the U.S. It is your responsibility to provide such evidence with your application. See Recognition of Foreign Qualifications click here
If you are claiming special priority selection rights under the Interagency Career Transition Assistance Program (ICTAP), you must submit a copy of your agency notice, most recent performance rating and most recent SF-50, Notification of Personnel Action, noting your current position, grade level and duty location. If you have never worked for the federal government, you are not ICTAP eligible. To be considered eligible, you must be placed in the well-qualified category for this position. Please see ICTAP eligibility
If you are claiming veterans’ preference, please submit the following documents. Please see Feds Hire Vets for detail

General Engineer, ZP Resume Examples & Samples

Up to 10% Domestic and International Travel
Developing and operating satellite and ground system designs and operations
Implementing mission assurance techniques
Writing and staffing enterprise-level technical policy documents and procedures
Overseeing and implementing U.S. and international space sector capabilities and issues

General Engineer Resume Examples & Samples

Experience recommending improvements to management on projects and reporting project status and incidents
Experiencing assisting management in technical engineering requirements including technical scope, schedule and resources
Experience advising other organizations regarding current and future engineering projects and programs
Experience interpreting technical information and providing guidance to junior engineers and technicians

General Engineer, GS Resume Examples & Samples

Up to 10% of travel may be required
Performing regional HVAC maintenance, repair and operations, including remote monitoring, operation and troubleshooting of HVAC controls via modem or TCP/IP connection
Evaluating and controlling costs of design, maintenance and repairs of mechanical systems
Implementing Environmental/Safety and Compliance requirements and reviewing offices to ensure compliance with Environmental and Safety requirements on regulation and policies
Providing contracting officers with reports on performance, progress payments, and closeout documentation

General Engineer, ZP Resume Examples & Samples

Up to 10% of domestic travel may be required
Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico
Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A
Applying technical engineering expertise to ship construction, conversion, and repair
Preparing contract plans and specifications including estimates of the amount of money the ship construction or modifications will cost and the time it will take to build for all phases of ship construction, alteration and repair
Preparing detailed working drawings, vendor drawings, or supporting calculations of the ship's basic characteristics including mechanical and electrical systems
Performing inspections and participating in trials and acceptance runs to test the ship's performance; and
Investigating, evaluating and making recommendations on problems involving design changes in the conversion, alteration, repair, or modernization of vessels

General Engineer Resume Examples & Samples

Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences as described by OPM
Experience serving as a technical expert on all aspects of railway track investigations
Experience inspecting and maintaining rail track systems

General Engineer Resume Examples & Samples

Travel may be required up to 20% of the time
Overseeing the completion of projects using expert professional knowledge of multiple engineering and scientific disciplines
Planning and conducting complex work for which precedent data, criteria, methods, or techniques are inadequate in some respects
Completing engineering work where the purpose is to improve, extend, or validate currently known precedents, data, methods, or techniques
Developing, applying, reviewing, or assessing compliance with systems engineering and acquisition policies, procedures, guidelines and best practices
Physically resided in the United States or its protectorate or territories (excluding short trips abroad, such as vacations)
Worked for the United States government as an employee overseas in a federal or military capacity; or
Been a dependent of a United States federal or military employee serving overseas as an authorized accompany to the federal civilian or military member to the foreign location

General Engineer Resume Examples & Samples

Responsible for the relay protection & control engineering including detailed design for high voltage substation and transmission projects through 500kV
Depending upon complexity of the project, the candidate may prepare, provide guidance, or assist in preparing and developing the engineering deliverables for electric substation projects - including the development of one & three line diagrams; schematics and wiring diagrams; relay settings and calculations; control and relaying panel layouts and specifications; control and relaying panel and equipment wiring diagrams; SCADA system and communications interfaces including RTUs, HMIs, and IEDs; commissioning and functional testing specifications
Will be responsible for working closely with other engineering and design team members to coordinate protection and control package and requirements
Other duties include developing technical specifications, development of project design basis, providing direction and guidance to drafters and designers, including regularly providing project status updates to project engineer
Minimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) or equivalent training experience such as an advanced technical degree, MBA or Certification in Project Management
Experience in Protection Relay, Control, and scada systems
Knowledge of Power System Symmetrical Components
Knowledge of NERC and other regulatory compliance requirements
Strong teamwork, interpersonal skills and the ability to communicate with all management levels

General Engineer Resume Examples & Samples

Travel is typically for training purposes or to perform job duties
Evaluating site management and operations according to contracting specifications
Identifying programmatic and facility specific deficiencies
Reviewing construction deliverables developed by the contractor
Monitoring field activities
Preparing technical engineering reports, studies and evaluations regarding non-controversial issue
Performs, a variety of oversight and engineering duties relating to facility operations, planning, operational coordination, and overseeing the maintenance and operations contractor activities
Independently reviews and analyzes Architect-Engineer, Contractor-prepared engineering designs and reports
Evaluates site operational problems involving water, brine, and crude oil systems, and identifies desirable equipment or system modifications for initiating and justifying engineering change proposals
Monitors and analyzes contractor site operations and maintenance budgets to determine need in relation to workload requirements, and makes recommendations
Independently reviews and analyzes Architect-Engineer contractor-prepared feasibility studies, engineering designs, and reports on new and/or modification to existing facilities and process equipment
Establish objectives and performance criteria for measurement of effectiveness of operations activities
Exercises originality in anticipating major problems, recognizing future program needs, and developing policies as well as standards, procedures, and instructions in oversight
Makes formal presentations on engineering and/or operations issues and serve as the official representative of the Site Operations and Maintenance Division in meetings
Knowledge applicable to a wide range of duties in one or more specialty areas and the skill sufficient to: modify standard practices and adapt equipment or techniques to solve a variety of engineering problems; adapt precedents or make significant departures from previous approaches to similar projects to accommodate the specialized requirements for some projects; and apply the standard practices of other engineering disciplines
Ability to adopt precedent or make significant departures from previous approaches to similar projects to accommodate specialized requirements for assigned projects
Knowledge of the procurement process sufficient to participate in the timely procurement of contracts for construction of facilities
Knowledge of the an organizations in sufficient detail to understand the interrelationships between the construction contractors, design, contractors, as required, for coordination of construction activities

General Engineer Resume Examples & Samples

Knowledge of multi-disciplinary professional engineering concepts, principles, practices, standards, methods, techniques, materials, and equipment
Skill in preparing design concepts and ability to convey ideas and formulate working drawings using CADD, GIS, and project management/scheduling software programs such as MS Project and Primavera
Skill in evaluating state-of-the-art scientific and environmental/engineering technologies and incorporating into the planning, design, operation, maintenance, repair, and upgrade of installation natural and built infrastructure
Knowledge of the principles, practices, and policies of professional engineering program management to include program planning and budget cycles, and financial control/budgeting systems
Knowledge of contracting principles, policies, procedures, and regulatory requirements as applied to program management

General Engineer Resume Examples & Samples

30% Disabled Veterans
Knowledge of a broad range of professional engineering concepts, principles, practices, techniques, and methods in building design and construction process, and an extensive familiarity with engineering disciplines; knowledge of esthetic and functional design techniques; preparation of preliminary drawings, sketches, and construction drawings; and a broad range of architectural and construction standards, methods, practices, techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations
Knowledge of a broad range of program planning and budgeting cycles, financial control and budget systems, and management; work classifications and the regulatory and statutory restrictions on the expenditures of appropriated and non-appropriated funds; and automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions
Ability to use initiative and resourcefulness to research, analyze, interpret, and apply rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions
Ability to plan, lead, and record site/facility surveys and inspections
Ability to plan, lead, and organize work and coordinate with other engineering disciplines; and to communicate effectively, both orally and in writing and maintain good working relations in a persuasive manner as a senior engineer

General Engineer Resume Examples & Samples

90-Day Competitive Certificate: This vacancy announcement may be used to fill like vacancies for 90-days from the closing date. Applicants may be referred for consideration as/if additional vacancies occur during this period
OCCASIONAL TRAVEL BY MILITARY AND/OR COMMERCIAL AIRCRAFT MAY BE REQUIRED
Knowledge of a broad range of professional engineering concepts, principles, practices, techniques, and methods in building design and construction process, and an extensive familiarity with engineering disciplines; knowledge of aesthetic and functional design techniques; preparation of preliminary drawings, sketches, and construction drawings; and a broad range of architectural and construction standards, methods, practices, techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations
Ability to plan, lead and organize work and coordinate with other engineering disciplines; and to communicate effectively, both orally and in writing and maintain good working relations in a persuasive manner as a senior engineer

General Engineer Resume Examples & Samples

Professional knowledge of general engineering policies, theories, principles and concepts, and familiarity with other engineering disciplines
Knowledge of computer operations and standard software applications
Overtime and/or emergency overtime may be required
This is a testing designated position (TDP). The employee is subject to random drug testing as a condition of employment

General Engineer Resume Examples & Samples

Knowledge of a wide range of multidisciplinary professional environmental and facility engineering theories, concepts, principles, standards, methods, techniques, materials, and equipment, as well as knowledge of standard construction and contracting regulations, practices, and procedures
Knowledge of the principles of planning and program management; common business and economic principles, theories, concepts, and procedures: financial management principles and standards: and of the DoD planning, Programming, and Budgeting System (PPBS)
Skill in evaluating state-of-the-art scientific and engineering technologies and incorporating into the planning, design, operation, maintenance, repair and upgrade of installation natural/built infrastructure
Ability to plan, organize, and direct the functions and mentor, motivate, and appraise the staff of an organization through subordinate supervisors
Ability to analyze, plan, and adjust work operations of one or more organizational segments to meet program requirements and objectives within available resources

General Engineer Resume Examples & Samples

Expert knowledge of a broad range of engineering disciplines, concepts. principles, and practices; expert knowledge of a broad range of test and evaluation disciplines, test design, principles and practices; and expert knowledge or operational test and evaluation organization and structure, concepts, principles, practices, and applicable code, regulations, policy and issues
Expert knowledge of models, simulations, and other analytical tools associated with the operational test and evaluation of military aircraft and aircraft systems; In-depth knowledge of the acquisition system, including the operational requirement development process, the role of test and evaluation, and the impact or reform initiatives; and in-depth knowledge of regulations, instructions, and other guidance regarding test and evaluation and operational test and evaluation
Professional knowledge of military aircraft systems and subsystems and professional knowledge of organizational concepts and operating procedures and knowledge of military and civilian personnel regulations, procedures, and practices and knowledge of data instrumentation and analytical methods as they relate to the flight testing of military aircraft and associated systems and subsystems
Knowledge of support contractor task management regulations, policies, and procedures
Ability to forecast and manage the workload of the organization and its military. civilian, and contractor members
Ability to interact and operate effectively in an environment consisting of personnel from diverse backgrounds. Qualifications, and organizational objectives and ability to communicate effectively both orally and in writing

General Engineer Resume Examples & Samples

Developing, planning, and managing Military Construction (MILCON), Host Nation Funded Construction (HNFC), and Sustainment, Restoration and Modernization (SRM) programs and projects
Developing local engineering policies, procedures and processes
Performing and providing facilities civil, architectural, structural, mechanical, electrical engineering design technical knowledge for projects
Knowledge of professional engineering principles, practices, and theories
Knowledge of Military Construction (MILCON) and/or Host Nation Funded Construction (HNFC) projects
Knowledge of Sustainment, Restoration and Modernization (SRM) programs and projects
Ability to communicate orally and in writing

General Engineer Resume Examples & Samples

If you are a current or previous federal employee in the GS-800 series as an engineer, you may submit your most recent SF-50 in lieu of college transcripts
Complete college course list*
Training plan, performance appraisal and/or letter from Professional Engineer Supervisor
Complete list of all college courses must identify: college or university attended, course title/number taken, semester or quarter hours earned, grade and grade-point received. Transcripts must reflect receipt of degree and date degree was awarded, if applicable. To receive credit for foreign education, you must provide proof that the education has been evaluated by an organization specializing in interpretation of foreign educational credentials and has been deemed to be at least equivalent to that gained in conventional U.S. education programs
Knowledge of development testing and evaluation sufficient to apply experimental theories and/or new applications to issues and provide technical advice and direction in support of weapon systems, subsystems, and/or support equipment
Knowledge of the principles of planning and project management; standard acquisition regulations, practices, and procedures; and other engineering disciplines used in support of sustainment, modification, and maintenance programs
Ability to devise and evaluate criteria, parameters, characteristics, and interrelationships for design approaches; to assess the impact of new technology on current systems and processes; and to gather, assemble, and analyze facts, form conclusions, devise and recommend solutions to problems
This position has been designated as an acquisition position and is covered by the Acquisition Professional Development Program (APDP). Work requires the appropriate APDP certification(s); i.e., Level 2 or 3 in an area such as Test & Evaluation (T&E); Systems Planning, Research, Development, and Engineering-Systems Engineering (SPRDE-SE); Systems Planning, Research, Development, and Engineering-Program Systems Engineer (SPRDE-PSE), or Program Management
Eligibility Documentation: SF50, DD-214(Member-4 copy or Service 2 Form), Proof of Disability, Certification of Job Readiness, etc

E General Engineer Resume Examples & Samples

Performs engineering tasks associated with critical engineering projects or a number of small projects with many complex features. ; 50
Evaluates, develops and implements projects that have moderate financial and operational impact. ; 10
Influences project decisions having a moderate impact on the company

General Engineer Resume Examples & Samples

Minimum of two related career experiences (2) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OR
Knowledge of NERC CIP regulatory compliance requirements
Cyber security certification (Security+, GICSP, or CISSP) is a plus

General Engineer Resume Examples & Samples

Evaluates site management and operations according to contracting specifications
Identifies programmatic and facility specific deficiencies
Reviews construction deliverables developed by the contractor
Monitors field activities
Prepares technical engineering reports, studies and evaluations regarding non-controversial issue
Independently reviews and analyzes Architect-Engineer Contractor-prepared feasibility studies, engineering designs, and reports on new and/or modification to existing facilities and process equipment
Establishes objectives and performance criteria for measurement of effectiveness of operations activities
Makes formal presentations on engineering and/or operations issues and represents engineering concerns in organizational meetings
Professional Registration or Licensure—Current registration as an Engineer (EI) Intern, Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico; —OR
Written Test—Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; —OR—
Specified Academic Courses—Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; —OR—
Related Curriculum—Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance

Download General Engineer Resume Sample as Image file

Related Job Titles

General Maintenance Engineer Resume Sample

IT Infrastructure Engineer Resume Sample

Rf Engineer Resume Sample

Value Engineer Resume Sample

Sofware Engineer Resume Sample

Tools Engineer Resume Sample

MES Engineer Resume Sample

OSP Engineer Resume Sample

DCS Engineer Resume Sample

Supervisory General Engineer Resume Sample

Sys Engineer Resume Sample

Improvement Engineer Resume Sample

Browse More

General Engineer Resume Samples

The Guide To Resume Tailoring

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Resume Builder

15 General Engineer resume templates

Read our complete resume writing guides

How to Tailor Your Resume

How to Make a Resume

How to Mention Achievements

Work Experience in Resume

50+ Skills to Put on a Resume

How and Why Put Hobbies

Top 22 Fonts for Your Resume

50 Best Resume Tips

200+ Action Words to Use

Internship Resume

Killer Resume Summary

Write a Resume Objective

What to Put on a Resume

How Long Should a Resume Be

The Best Resume Format

How to List Education

CV vs. Resume: The Difference

Include Contact Information

Resume Format PDF vs Word

How to Write a Student Resume

General Engineer Resume Examples & Samples

Senior General Engineer, GS Resume Examples & Samples

General Engineer, GS Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer GS Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer GS Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

Interdisciplinary General Engineer Resume Examples & Samples

Interdis General Engineer Resume Examples & Samples

Interdis General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer, GS Resume Examples & Samples

General Engineer, GS Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer, GS Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer, GS Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer, GS Resume Examples & Samples

General Engineer Resume Examples & Samples

Senior.general Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

Student Trainee General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

Interdisciplinary General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Welding Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer, GS Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

General Engineer Resume Examples & Samples

How to Make
a Resume

50 Best
Resume Tips

200+ Action
Words to Use

Internship
Resume