Metrology Technician Resume Samples
4.6
(98 votes) for
Metrology Technician Resume Samples
The Guide To Resume Tailoring
Guide the recruiter to the conclusion that you are the best candidate for the metrology technician job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.
Craft your perfect resume by picking job responsibilities written by professional recruiters
Pick from the thousands of curated job responsibilities used by the leading companies
Tailor your resume & cover letter with wording that best fits for each job you apply
Resume Builder
Create a Resume in Minutes with Professional Resume Templates
CHOOSE THE BEST TEMPLATE
- Choose from 15 Leading Templates. No need to think about design details.
USE PRE-WRITTEN BULLET POINTS
- Select from thousands of pre-written bullet points.
SAVE YOUR DOCUMENTS IN PDF FILES
- Instantly download in PDF format or share a custom link.
CL
C Luettgen
Caleigh
Luettgen
1602 Lacey Plains
Boston
MA
+1 (555) 992 1824
1602 Lacey Plains
Boston
MA
Phone
p
+1 (555) 992 1824
Experience
Experience
New York, NY
Metrology Technician
New York, NY
Hoppe and Sons
New York, NY
Metrology Technician
- Develop CMM programs for ad hoc and NPI inspection requests
- Modify existing inspection programs
- Operate CMM, Faro Arm, and/or ATOS scanner
- Support Production SPC and Engineering special projects by collecting high quality dimensional data
- Develop data reports for inspection requests
- Microsoft Office Suite: Excel, Word, PowerPoint, etc
- Technical competency with pressure, mass, temperature, torque and vibration equipment including calibration and troubleshooting
Phoenix, AZ
Quality Metrology Technician
Phoenix, AZ
Brekke-Schinner
Phoenix, AZ
Quality Metrology Technician
- Perform workmanship evaluations on plastic parts (flash, damage, discoloration, contamination, etc.) using microscopes
- Perform tests and records data on spreadsheets
- Develops and uses measurement methods and equipment to determine the dimension features of products conform to the design features
- Optimize inspection methods to expedite inspections and manage equipment capacity
- Develop measurement programs for use by quality inspectors and production personnel
- Train colleagues / technicians/inspectors on vision system (i.e. – OGP) and Coordinate Measurement Machine (CMM) operation for parts being ran on production floor
- Provide support for Corrective Action investigation
present
Chicago, IL
Senior Metrology Technician
Chicago, IL
Kunze, Keebler and Bogisich
present
Chicago, IL
Senior Metrology Technician
present
- 10% Writes, develops and reviews Standard Operating Procedures
- Draft, execute, and review calibration and qualification documentation (e.g.IQ/OQ/PQ)
- 5% Other related duties as assigned by supervisor
- Excellent communication (oral and written) and attention to detail
- 5% Reviews and approves equipment specifications
- Troubleshoot various equipment and instrumentation
- Administer program for the scheduling and documenting maintenance, calibration, and qualification of laboratory equipment and instrumentation
Education
Education
Associate’s Degree in Engineering
Associate’s Degree in Engineering
Kennesaw State University
Associate’s Degree in Engineering
Skills
Skills
- Strong mathematical skills, basic knowledge of general engineering and electrical theories and practices
- Knowledge of basic relay ladder logic, programmable logic controllers (PLCs) and distributed control systems (DCS)
- Basic mathematical and reasoning ability
- Ability to effectively communicate in writing and verbally with the ability to work as part of a team and accept direction from peers
- Work experience where attention to detail and personal accountability were critical to success
- Strong organizational skills and attention to detail
- Computer literate in Maximo or similar computer based calibration program highly desirable
- Knowledge of PID control theories and techniques and have ability to read, interpret, and troubleshoot engineering drawings, P&IDs and electrical schematics
- Demonstrates good interpersonal skills, is attentive and approachable
- Be organized. Maintain good records, and be able to access them rapidly. Understand where information can be found
15 Metrology Technician resume templates
Read our complete resume writing guides
1
Senior Metrology Technician Resume Examples & Samples
- 60% Schedule and perform calibrations IAW SOP’s or manufacturers procedures on Measurement and Test Equipment insuring scheduled work requirements are met
- 20% Maintain documentation IAW Metrology Master SOP and GMP requirements
- 10% Writes, develops and reviews Standard Operating Procedures
- 5% Reviews and approves equipment specifications
2
Metrology Technician Resume Examples & Samples
- Develop CMM programs for ad hoc and NPI inspection requests
- Modify existing inspection programs
- Operate CMM, Faro Arm, and/or ATOS scanner
- Support Production SPC and Engineering special projects by collecting high quality dimensional data
- Develop data reports for inspection requests
- Inspection Experience; experience using PC-DMIS (preferred)
- Faro Arm/CMM experience; preferably Polyworks/PC-DMIS
- Microsoft Office Suite: Excel, Word, PowerPoint, etc
3
Metrology Technician Resume Examples & Samples
- Associate's degree or applicable technical training and certifications and 2 years of directly related experience. In lieu, 6 years of related experience
- PMEL graduate preferred
- Knowledge and practical application of standard processes to ensure the maintenance of an accredited Quality System ISO9001:2008, Z-540.1 and NIST traceable certificates of compliance
- Technical competency with pressure, mass, temperature, torque and vibration equipment including calibration and component level troubleshooting
- Benchtop, or Fluke Met/Team, Met/Track and Met/Cal experience a plus
- Ability to develop, organize and complete tasks and projects using software programs such as Microsoft Word, Excel and PowerPoint
- Experience with automated testing of IM&TE
4
Metrology Technician Resume Examples & Samples
- 2 year technical degree/certification or military training equivalent or 2 years of electronic test and troubleshooting experience
- Basic card level fault isolation and interpretation of test results
- Determination of passing & failing results, and ability to comprehend tolerances
- Basic test skills, automated with some manual
- Ability to set up and use oscilloscopes, digital & analog voltmeters, frequency counters and automated test equipment
- Basic understanding of blueprints and schematic diagrams
- Basic signal tracing ability
- Ability to correctly identify correction of a fault
- Ability to communicate findings in written or oral format
5
Metrology Technician Resume Examples & Samples
- Preferred candidates will demonstrate technical competency with RF and Microwave equipment including calibration and component level troubleshooting
- Fluke Met/Team and Met/Cal experience a plus
- A broad range of skills from cable repair to automated test system PC support desired
6
Metrology Technician Resume Examples & Samples
- PMEL/TMDE graduate preferred
- Technical competency with pressure, mass, temperature, torque and vibration equipment including calibration and troubleshooting
- Fluke Met/Team, Met/Track and Met/Cal experience a plus
7
Metrology Technician Resume Examples & Samples
- Preferred candidates will demonstrate technical competency with Electronic, Phase, Temperature, and Automated Test Systems including calibration and component level troubleshooting
- Benchtop or Fluke Met/Track and Met/Cal experience a plus
- Develop, Organize and Complete Tasks and Projects Using Software Programs Such as Microsoft Word, Excel and PowerPoint
8
Calibration / Metrology Technician Resume Examples & Samples
- Perform job functions under limited supervision in laboratory, production area, clean room, and test environments. May require travel to off-site locations up to 60 miles. May require travel outside of Minnesota up to 10% of time
- Enter calibration results into calibration tracking / documentation computer system
- Work with equipment users, engineers, and other technicians in the proper operation and selection of test and measurement equipment
- 2 Years Degree Technical school training (60 semester credits) in metrology and calibration or equivalent military training
- Minimum 8 years technician experience in metrology/calibration
- Previous experience with principles and practices of metrology/calibration including: physical and dimensional calibrations, calibration tracking, and documentation software systems
- ASQ Certified Calibration Technician rating is a plus
- Strong math and physics background
- Working knowledge of Geo-metric Dimensioning and Tolerancing techniques interpreting blue prints
- Possess a State Driver’s License
- Organized, efficient, process oriented; interpersonal/communication skills; self-motivated; team player; strong work ethic; works well under pressure in a dynamic environment; tactful, exercises independent judgment and discretion – professional presentation
9
Calibration / Metrology Technician Resume Examples & Samples
- Perform all necessary transactions in the appropriate systems in order to ensure integrity of calibration/inspection data
- Write, modify, and maintain procedures used for calibration activities
- Perform special assignments with minimal supervision
- Follow instructions regarding the maintenance and use of Calibration Standards
- 2+ years of experience in quality or calibration
- Calibration experience including dimensional, temperature, flow, mass, pressure, rotation & balance; basic troubleshooting skills and the ability to troubleshoot measurement and process equipment; familiarity with calibration standards
- Ability to read schematics; and understanding of process equipment
- Excellent written and verbal communication skills, self-directed, attention to detail
- Maintains a general understanding of calibration disciplines, GMP and QA systems
- ASQ Calibration Technician certified is a plus
- Knowledge of Microsoft Office Applications (Word, Excel, Access, and PowerPoint) and Windows. Familiar with these regulations: FDA 21 CFR Part 820 cGMP, ISO 13485
10
Metrology Technician Resume Examples & Samples
- Integrity testing of HEPA filters, Clean Benches, Bio-Hoods and Fume Hoods
- Calibration of pressure, vacuum, temperature, RH, tension, torque, weight, resistance, current, time and flow
- Communication of instrumentation problems with internal customers and Management
- Troubleshoot and repair instrumentation
- Special Engineering related projects
- Maintain effectiveness of the Quality System components relevant to this position
- Two years of Engineering, calibration, or related experience
- Prior experience troubleshooting of electronic and electrical circuits
- Knowledge/Skills Requirements
- Be organized. Maintain good records, and be able to access them rapidly. Understand where information can be found
- Must be able to interact effectively with a variety of individuals and personalities within and between departments
- Demonstrated intermediate mathematical ability
- Strong communication skills both written and oral
- A full complement of business computer literacy skills (e.g., word processing, spreadsheets, database software etc.) is preferred
- Ability to work independently on multiple projects
- Well organized and detail and multi-task oriented
- Must be computer literate with MS Office, spreadsheets and ERP & PSR systems (JDE preferred)
- Review reports, etc. for accuracy and logic
- Meet deadlines and work under pressure with limited supervision
- Frequent sitting, standing, walking, reading of written documents and use of computer monitor screen, reaching with hands and arms, talking, writing, listening
- Occasional bending, grasping, carrying, stooping, kneeling, crouching
- Frequent lifting and/or moving up to 10 pounds and occasional lifting and/or moving up to 30 pounds
- Fast-paced
- Customer focused
- Catalent Values and Competencies
- Dedicated to our customers
- Strive for excellence and speed, every day
- Engages & Inspires
- Delivers Innovative Solutions
- Builds Collaboration & Teamwork
11
Senior Metrology Technician Resume Examples & Samples
- Perform maintenance, calibration, and qualification of routine bio/pharmaceutical laboratory equipment and instrumentation to meet GMP/GLP requirements
- Administer program for the scheduling and documenting maintenance, calibration, and qualification of laboratory equipment and instrumentation
- Course work in science/electronics helpful; bio/pharmaceutical experience
- Experience working with tools, diagnostic equipment, and electronic hardware
- PC experience
- Excellent dexterity and ability to perform repeated balance weighing activities
12
Metrology Technician Resume Examples & Samples
- Requires demonstrated knowledge of several key areas of metrology with a strong focus on physical dimensional measurement and calibration work. Application of knowledge in measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment
- Inspection of components utilizing coordinate measuring machines and high precision measuring and test equipment to support engineering and production
- Interprets engineering drawings, schematic diagrams, or formulas to determine quality standards, inspects measuring and test equipment, analyzes and interprets results of measurements and calibrations using mathematical formulas and authenticate calibration certificates for measurements and calibrations and calibration correction
- Operate and maintain analytical test equipment used in production, inspection and laboratory’s
- Perform calibration, testing, troubleshooting and some repair, as necessary, data collection and report completion on a wide range of electronic (electrical) and mechanical measuring and test equipment (M&TE)
- Assist in the validation of quality related Calibration procedures and work instructions
- Assist in other areas of system Quality and complete required documentation to certify the verification and calibration of electronic and mechanical M&TE and component inspections
- Focus on providing the best service possible to our customers and fellow employees
- Self-manage time to obtain maximum efficiency
- Maintain good housekeeping in all aspects of work ensure proper storage and cleaning and contribute to the correct functioning of the lab
13
Metrology Technician Resume Examples & Samples
- Perform calibrations and servicing of transducers including: Accelerometers, Pressure, Displacement, Torque, DMM, Amplifiers
- Coordinates repairs and calibrations performed by outside vendors
- Coordinates and implements off-site calibration needs and activities
- Assists project engineers in developing test and calibration methods or procedures
- Documents calibration and repair activities
- Develops written calibration procedures
- Mentor support technicians in calibration activities
- Fosters good communications; establishes and maintains cooperative and productive work relations with all other departments
- Responsible for informing managers, peers and division personnel of work progress, support problems, scheduling conflicts or opportunities of which they should be aware
- Seeks opportunity for innovation and continuous improvement
- High school graduate, AA Degree in Technology or equivalent experience
- Minimum of 4 years of related experience
- PMEL or TMDE experience is preferred
- Certified Calibration Technician a plus
- Transducer database software such as Fluke Met-Track or Met-Team
- Strong mathematical skills, basic knowledge of general engineering and electrical theories and practices
- Ability to read and understand engineering drawings of electrical/mechanical equipment, test fixtures and assemblies
- Ability to effectively communicate in writing and verbally with the ability to work as part of a team and accept direction from peers
- Able to plan, organize and schedule work flow
14
Metrology Technician Resume Examples & Samples
- Associate’s degree or applicable technical training and certifications and 4 years of directly related experience. In lieu of formal education, 4 additional years of experience can be substituted
- Knowledge and experience calibrating and troubleshooting legacy test panels used for testing of various aviation products
- Must be able to interpret legacy technical drawings and work instructions
- Experience using an electronic job tracking/work order database (Met/Team preferred)
15
Metrology Technician Resume Examples & Samples
- 70% Schedule and perform calibrations IAW SOP’s or manufacturers procedures on Measurement and Test Equipment insuring scheduled work requirements are met
- 5% Researches equipment specifications and procedure for preparation of system additions. Prepares documentation for review by senior personnel
- 5% Other related duties as assigned by supervisor
- 3 years metrology experience or equivalent required
16
Senior Metrology Technician Resume Examples & Samples
- Ensure that all equipment is properly validated, calibrated and qualified according to appropriate Good Manufacturing Practices (cGMP)
- Draft, execute, and review calibration and qualification documentation (e.g.IQ/OQ/PQ)
- Communicate with supervisor and other colleagues as required
- Monitor contractors for calibrations, validations, and repairs as required
- Communicate Metrology area needs to Facilities, Testing and Manufacturing personnel
- Contact suppliers/vendors as required
- Electronic repairs
- Associate’s degree with major in technical discipline or related experience or equivalent training and/or experience
- Experience working with external vendors a must!
- Must be able to work in a flexible, fast paced environment with multiple projects
- Prioritizing skills and Candor a must!
- Troubleshoot various equipment and instrumentation
17
Camera Actuator Metrology Technician Resume Examples & Samples
- Excellent soldering and rework skills, including very small components
- Dynamics testing: random vibration, drop, shock, etc
- Data acquisition experience: Matlab, Labview, etc
- Experience with Oscilloscopes, Digital Signal Analyzers, LCR meters
- Excellent documentation skills, including manufacturing and inspection drawings
- Experience with miniature actuators such as MEMS, VCMs, and Piezo is a plus
- Knowledge of control systems is a plus
- Must be able to work both independently and as part of a team, and manage priorities appropriately
- Amateur photographers or interest in combining a love of photography with your career!
18
Metrology Technician Resume Examples & Samples
- Assists in qualification activities related to instrumentation and calibration
- Perform calibrations, PMs and troubleshooting on instrumentation and supports equipment maintenance activities
- Provides technical support as Metrology SME for engineering projects towards improvement of processing equipment, utilities and facilities instrumentation
- Participates in cross functional teams to support business needs including planning and scheduling of work
- Monitors instrument diagnostics through Rosemount’s A.M.S. Software and planning corrective/predictive maintenance around instrument needs
- Provides off shift feedback to Metrology, Maintenance and Critical Utilities supervisors on daily coordination
- May participate in emergency “on-call” rotation as required to support operations
- A minimum of two years’ experience applying the knowledge, principles, and practices relevant to calibration and instrumentation
- Prior evidence of successful participation on work teams where combined contribution, collaboration, and results were expected
- Demonstrated proficiency in common computer tools such as word processing, spreadsheet and web based applications
- Work experience where attention to detail and personal accountability were critical to success
- Demonstrates good interpersonal skills, is attentive and approachable
- Maintains a professional and productive relationship with area management and co-workers
- Computer literate in Maximo or similar computer based calibration program highly desirable
- Knowledge and understanding of operating principles/practices relevant to calibration, instrumentation and control systems
- Knowledge of PID control theories and techniques and have ability to read, interpret, and troubleshoot engineering drawings, P&IDs and electrical schematics
- Knowledge of basic relay ladder logic, programmable logic controllers (PLCs) and distributed control systems (DCS)
- Knowledge of DeviceNet and Foundation Fieldbus instrumentation, Delta V distributed control system, and Rosemount’s A.M.S. Software, desired
- Knowledge of both calibration and maintenance of instrumentation on biotech manufacturing equipment, desired
- Knowledge of science generally attained through studies resulting in an Associate’s Degree in electronics technology or equivalent training
- A minimum of two years of experience applying the knowledge, principles and practices relevant to calibration and instrumentation
- 1604169
19
Metrology Technician Resume Examples & Samples
- Military PMEL/TMDE training preferred
- Technical competency reading blue prints and poses in-depth knowledge of GD&T, Gage Makers tolerances, Electronic Calibration, Fluke MetTeam, Met/Cal and PMEL a plus
- Broad range of skills in all aspects of Physical Dimensional Calibration, with CMM experience a plus
20
Metrology Technician Resume Examples & Samples
- Technical competency reading blue prints and poses in-depth knowledge of GD&T
- Broad range of skills in all aspects of Physical Dimensional Calibration, with Electronic
- Fluke MetTeam and Met/Cal experience a plus
21
Metrology Technician Resume Examples & Samples
- Troubleshooting and Calibration of RF equipment
- Fluke Met/Team, Fluke Met/Track and Met/Cal experience a plus
- Environmental chamber maintenance and repair a plus
22
Metrology Technician Resume Examples & Samples
- Tests, calibrates, and repairs mechanical, electromechanical, and electronic measuring, recording, and indicating instruments and equipment for conformance to established standards, and assists in formulating calibration standards
- Sets up standard and special purpose laboratory equipment to test, evaluate, and calibrate other instruments and test equipment
- Measures parts for conformity with specifications, using micrometers, calipers, and other precision instruments. Aligns, repairs, replaces, and balances component parts and circuitry
- Associate’s degree or applicable technical training and certifications and 1 year of directly related experience
- Proficient with Microsoft Software (Word, Excel, PowerPoint)
23
Metrology Technician Structured Light Scanning Resume Examples & Samples
- Conducts, reviews, and assists in structured light scanning (aka, scanning) and photogrammetry sessions in support of major development, production, and flight programs, which will include analysis of novel, unprecedented, or controversial problems
- Conducts scanning of parts and assemblies as part of digital assembly, reverse engineering, part acceptance, tool and fixture setup, and as-designed to as-built comparisons
- Operates scanning systems and photogrammetry equipment
- Performs calibration of equipment
- Uses scanning, photogrammetry, and Computer Aided Design (CAD) modeling software to gather as-built/as-assembled condition of hardware
- Excellent communication skills including written and verbal
- Basic knowledge of metrology ideas and how to apply
24
Metrology Technician Resume Examples & Samples
- Calibrating a full range of physical, dimensional and electrical instruments and measuring devices with written instructions (such as department procedures, manufacturing specifications, industry and military specifications) to include laboratory standards
- Analyzing data generated in testing to correctly determine whether parameters meet compound specifications and uncertainties
- Interpreting customer and industry specifications to determine accuracy requirements and test ranges
- Maintaining accurate records of the parameters tested, findings, and tolerances of each gage or instrument calibrated
- Assisting in the creation of test processes and procedures for new products when required
- Setting up and operating a variety of measuring and monitoring equipment to ensure repeatability of data during calibration testing
- Involves the measurement of temperature, pressure, mass, force, AC/DC voltage, frequency, resistance and capacitance
- Providing training to apprentice technicians on metrology principles, resolving technical problems
- Performing repairs on inspection, measuring, and test equipment to the component level when required by defect or system failure
- Maintaining equipment and work area in a clean and orderly manner
- Resolving group and customer issues, improving the overall productivity of the department using Lean and Six Sigma principles, anticipating problems and initiating appropriate actions to eliminate them
- Assisting customers to define technical requirements to meet their objective
- Two years technical degree/certification or military training equivalent. In lieu of technical certification, four years of related experience is required
- PMEL trained or equivalent highly preferred
- Determination of passing & failing results, and ability to comprehend complex tolerances
- Intermediate physical metrology test skills, with the ability to use torque transducers, digital & analog pressure gauges, temperature baths and simulators and vibration controllers and amplifiers
- Intermediate understanding of blueprints and schematic diagrams
25
Metrology Technician Resume Examples & Samples
- Have strong math skills and mechanical aptitude
- Preferred candidates will demonstrate technical competency reading blue prints and poses knowledge in Geometric Dimension and Tolerance per ANSI Y-14.5
- Have a broad range of skills in all aspects of Physical Dimensional Calibration, with Electronic
- Calibration Experience and PMEL a plus
26
Metrology Technician Resume Examples & Samples
- Calibrates a full range of physical, dimensional and electrical instruments and measuring devices with written instructions (such as department procedures, manufacturing specifications, industry and military specifications) to include laboratory standards
- Analyzes data generated in testing to correctly determine whether parameters meet compound specifications and uncertainties
- Interprets customer and industry specifications to determine accuracy requirements and test ranges
- Maintains accurate records of the parameters tested, findings, and tolerances of each gage or instrument calibrated
- Assists in the creation of test processes and procedures for new products when required
- Sets up and operates a variety of measuring and monitoring equipment to ensure repeatability of data during calibration testing
- Utilizes common analog and digital test equipment to test individual subsystems of inspection, measuring, and test equipment
- Performs repairs on inspection, measuring, and test equipment to the component level when required by defect or system failure
- Promotes a safety culture within the work area through continuous improvement and RCCA activities
- Participates in improvement projects that provide business results
- Maintains equipment and work area in a clean and orderly manner
- Assists customers to define technical requirements to meet their objective
- High School diploma plus two years of related experience
- Intermediate electronic test skills, with the ability to use oscilloscopes, digital & analog voltmeters, frequency counters and multifunctional calibrators
- Ability to lift up to 25 Lbs. to table height
27
Metrology Technician Resume Examples & Samples
- Efficiently manage scheduled calibrations in order to optimize resources and minimize impact to manufacturing
- Maintain calibrations scheduling in a computerized metrology management system
- Identify inefficiencies in the metrology program and implement solutions to drive towards cost and time effective calibrations and processes
- Demonstrates initiative; ability to follow SOPs and direction and respond to situations as they arise
- Ability to communicate effectively at all levels in verbal and written form
28
Inspection / Metrology Technician Resume Examples & Samples
- Experience with managing equipment and tool procurement, performance, verification, maintenance, and calibration
- Experience with working on a manufacturing or production shop floor
- Experience with using PC-DMIS CMM metrology software
- Experience with reverse-engineering, touch-probes, and laser-scanning
- Experience with 2-D and 3-D CAD design software, including SolidWorks, and reading drawings, 3-D modeling, and geometric dimensioning and tolerancing (GD&T)
- Experience in working with DoD or Department of the Army (DA)
- Experience with additive manufacturing, including 3-D printing
- Knowledge of ISO 9001 quality management and best practices
- Knowledge of Lean Six Sigma process improvement and best practices
- Knowledge of industrial safety procedures and best practices
29
Metrology Technician nd Class Resume Examples & Samples
- Completion of Metrology I
- Completion of Metrology II
- Completion ISA I}
- Industrial Instrumentation (or equivalent**) or ELTR 2454 4 Hours
- Minimum of 12 months experience in-house Calibration OJT
- Industrial Safety (or equivalent**) or ELTR 1402 2 Hours
- Fundamentals of Electricity (or equivalent **) or ELTR 1064 4 Hours
- TPC Training Metrology 1064
- Basic Circuit Analysis (or equivalent**) or ELTR 1024 4 Hours
- TPC Training Metrology 1024
- Fluid Power (or equivalent **) or ELTR 1034 4 Hours
- TPC Training Metrology 1034
- Digital Fundamentals (or equivalent**) or ELTR 1114 4 hours
- TPC Training Metrology 1114
30
Metrology Technician Resume Examples & Samples
- Comprehensive knowledge of configuration management. Must have the ability to act as a liaison with both internal and external stakeholders requiring excellent communication skills with the ability to meet objectives and present information to senior levels within the company
- Coordinates Dimensional Control surveys during the fabrication, construction and assembly of ships, both structural and mechanical units involving stakeholders such as production, engineering, and program management
- Technical proficiency in the utilization of Spatial Analyzer Software to perform analysis of survey data. Produces and distribute Dimensional Control reports to relevant stakeholders
- Proficient in all Microsoft Applications (Word, Excel, Outlook, and Access). An understanding of ANSI Geometric Dimensioning and Tolerancing with ability to interpret working drawings used in construction is required
31
Inspection / Metrology Technician Resume Examples & Samples
- Experience with using PC
- DMIS CMM metrology software
- Experience with reverse
- Engineering, touch
- Probes, and laser
- Scanning
- Experience with 2
- D and 3
- D CAD design software, including SolidWorks, and reading drawings, 3
- D modeling, and geometric dimensioning and tolerancing (GD&T)
- Experience with additive manufacturing, including 3
- D printing
32
Senior Metrology Technician Resume Examples & Samples
- Leads staff to ensure completion of all routine and non-routine work and projects in compliance with applicable Standard Operating Procedures
- Follows sequence of testing from calibration procedures for instruments and equipment and ensures all tasks are performed in compliance with applicable Standard Operating Procedures
- Manage the calibration schedule in order to optimize resources and minimize impact to manufacturing
- Manage and report key performance metrics for the group and develop plans to advance performance and operational excellence within the Metrology group
- Assist with the validation and periodic review of Metrology systems
- AS or BS in a technically related field, or equivalent experience desired
- Working knowledge of cGMP guidelines, FDA 21 CFR Part 11, 210/211, ISO 14644 and 17025; and other international regulatory requirements
- Sound industry knowledge, project proficiency, and autonomy expected
- Demonstrates initiative; ability to undertake additional responsibilities and respond to situations as they arise
- Must be able to break down complex problems and tasks into activities capable of being performed by personnel
- Ability to communicate effectively at all levels in verbal and written form, including technical/business writing
33
Metrology Technician Resume Examples & Samples
- Calibrate a broad spectrum of equipment including but not limited to: Lab Ovens, Calipers, Torque drivers, Gages, etc
- Develop inspection plans and procedures based on requirements for inspection
- Follow process and procedures to Identify and segregate non-conforming materials, as well as completing documentation relative to the process
- Maintain all pertinent documentation for future reference regarding the first article process as well as other inspection processes as defined in the controlled processes
- Will also provide production support as it relates to quality and processes
- Three to five years of related experience in metrology/inspection or machining/part fabrication
- Computer abilities: Microsoft office suite
- Mechanical aptitude, ability to read detailed drawings, and understand GT&D
- Proficiency in planning and organizing workflow
34
Metrology Technician Resume Examples & Samples
- Operation of Portable CMM equipment to support monitoring of production processes, commissioning of new productions and root cause activities
- Experience with Polyworks and/or GOM Inspect to carrying out portable special measurement requests, portable tooling measurements within the production line and development of automated inspection programs for ATOS Scan Box
- CATIA or 3D CAD experience to work with native files as well as STEP and IGES to compare collected measurement data to nominal condition
- Liaise with Engineering and Manufacturing functions to understand measurement requirement for special investigations, developing correct datum scheme, collection of scan data and detailed reports to communicate key findings
- Certify fixtures in production line according to calibration schedule and report data comparing to historical measurements
- Requirement to lead and support 5S activities to ensure that workplace is organized, equipment spares are properly maintained and material flows through the lab in an efficient manner
- Inspection Experience; experience using Polyworks or GOM (preferred)
- CAD: CATIA or 3D CAD experience
- Inspection equipment experience: Experience with structured light scanning systems, laser trackers and/or FARO arms preferred
- Ability to use calipers, micrometers, height gage, etc
- Understanding of GD&T
35
Metrology Technician Resume Examples & Samples
- Devices setups and makes layouts required to inspect and calibrate instruments, gages or fixtures under inspection
- Involves the measurement of compound angles, irregular contours and multiple planes which are not at right angles or parallel
- Experience in inspection, measuring, and test equipment (IM&TE) calibration and repair
- Experience in inspection, measuring and test equipment (IM&TE) calibration and repair
- Proficient at understanding and writing reports and work instructions
- CMM (Coordinate Measuring Machine) trained and certified preferred
36
Metrology Technician Resume Examples & Samples
- AAS degree in technical field
- Prior work experience in metrology/calibration
- Prior electrical experience
37
Metrology Technician Resume Examples & Samples
- Good organizational skills and ability to follow direction
- Strong computer skills with Microsoft Products
- Ability to read blueprints, basic GD&T preferred
- Experience using precision measuring instruments a plus
38
Metrology Technician Resume Examples & Samples
- Performs routine and complex work related to the repair and calibration of electronic, electro-mechanical and mechanical test and measurement equipment
- Provide maintenance on equipment when required
- Uses calibration procedures and measurement systems for use on company equipment in compliance with requirements
- Assures compliance to Quality Management System
- Assists engineering teams in assessing and implementing calibration processes and goals to supported systems
- Provide recall and calibration data to supported teams within the factory and test sites
- Minimum of 3 years of experience in the repair and calibration of electronic/electro-mechanical, process control equipment and mechanical equipment
- Familiar with ANSI Z540.3-2006
- Electrical and Physical Dimensional experience preferred
- AC/DC low frequency experience preferred
- Physical dimensional experience preferred
- Familiarity with IndySoft GageInSite preferred
- ASQ CCT preferred
- Experience with Microsoft Office (Word, Excel) and LabVIEW (or an industry specific software)
39
Senior Metrology Technician Mon-fri Resume Examples & Samples
- 60%: Schedule and perform calibrations IAW SOP’s or manufacturers procedures on Measurement and Test Equipment insuring scheduled work requirements are met
- 20%: Maintain documentation IAW Metrology Master SOP and GMP requirements
- 10%: Writes, develops and reviews Standard Operating Procedures
- 5%: Reviews and approves equipment specifications
- 5%: Other related duties as assigned by supervisor
- 5 years metrology experience or equivalent required
40
Metrology Technician Resume Examples & Samples
- Independently tests, calibrates, and repairs electrical, mechanical, electromechanical, and electronic measuring, recording, and indicating instruments and equipment for conformance to established standards, and assists in formulating calibration standards
- This worker provides training to apprentice technicians on metrology principle, resolving technical problems, and complicated electronic theory
- Disassembles instruments and equipment, using handtools, and inspects components for defects
41
Metrology Technician Resume Examples & Samples
- Perform dimensional reports, full layout and validations according PPAP’s phases and quality requirements, developing all technical documentation required according Eaton or/and customer standards
- Perform first part release, monitoring and special measurements for experiments, analysis, problem solving, safe launch
- Provide support for basic training for personnel involved for correct use of gages, instruments and/or measuring equipment according requirements of operation of Queretaro Plant
- Create, perform and train measuring methods, work instructions, visual aids for all instruments and/or measuring equipment assuring 5S’s standards
- Assure control IN/OUT of all instruments needed of quality warehouse
- Experience and knowledge for measuring and inspection instruments ( i.e. roughness / profile tester, optical comparator, laser micrometer, manual instruments, Marposs and Hommel optical tester) and performing of calibration methods
- GD&T experience and knowledge
42
Associate Metrology Technician Resume Examples & Samples
- Ensures that all equipment is properly validated, calibrated and qualified according to appropriate Good Manufacturing Practices (cGMP)
- Communicates with supervisor and other colleagues as required
- Monitors contractors for calibrations, validations, and repairs as required
- Communicates Metrology area needs to Facilities, Testing and Manufacturing personnel
- Contacts suppliers/vendors as required
- Responsible for maintaining accurate information in the site CMMS system
- Responsible for maintaining Equipment History Files and archiving qualification documentation
- Experience working with KAYE Validation a bonus
- Experience with REES or other validation software is very helpful but not required
43
Metrology Technician Resume Examples & Samples
- The Metrology Technician III performs, as needed, a variety of installation, calibration, maintenance, troubleshooting, and repair duties on complex laboratory, process and utility instrumentation, working closely with the Maintenance, Operations and Automation groups, in a primarily paperless work environment, following SOPs in a cGMP facility
- Works on assignments that are complex in nature where considerable judgment and initiative are required in resolving problems and making recommendations to management
- Incumbents may determine methods and procedures on new assignments with approval from management
- Participates in off shift support and emergency “on-call” rotation as required to support operations
- Participates in cross functional teams to support business needs
- Provides qualified instruction (Train the Trainer Program) to perform departmental technical training
- A minimum of four years of experience applying the knowledge, principles, and practices relevant to calibration and instrumentation
- Knowledge of principles/practices relevant to calibration and instrumentation
- General understanding of operating principles of industrial instrumentation and control systems
- General knowledge of P&IDs control theories and techniques and have ability to read, interpret, and troubleshoot engineering drawings, P&IDs, and electrical schematics
- Knowledge of basic relay ladder logic, programmable logic controllers, and distributed control systems
- Knowledge of DeviceNet and Foundation Fieldbus instrumentation, DeltaV distributed control system, and Rosemount’s A.M.S. Software
- Knowledge of both calibration and maintenance of instrumentation on biotech manufacturing equipment
44
Metrology Technician Resume Examples & Samples
- Develop and maintain techniques to properly analyze, align and inspect complex molded components with metrology equipment (ex. drop indicator, OGP, CMM, Micro-Vu, calipers, go/no go gauges)
- Conduct visual inspection on molded components; able to identify flash, shorts, contamination, etc
- Interpret inspection results and apply acceptance criteria identified on drawing or work order
- Perform monthly, quarterly and annual maintenance activities for equipment and test fixtures
- Interface/communicate with technicians and engineers to describe inspection results
- Provide guidance and training to other inspectors
- Inspect, test or measure molded components
- Prepares documentation for internal customers abiding to data integrity
- Knowledge and interpretation of GD&T symbols
- Read and understand blueprints and specifications in Metric and Standard
- Strong analytical and problem solving skills. Superior verbal/written skills. Good punctuation, spelling, grammar and attention to detail are a must
- PC-based computing experience required (word processing – Word, spreadsheet – Excel, presentation – PowerPoint, Minitab)
- Ability to take initiative, to work efficiently to meet deadlines, and to work in a team environment are essential. Able to work independently and remain self-motivated with minimal direct supervision
- Must be highly organized, thorough, and possess and practice good record keeping skills
- Must function effectively in a diverse, cross-functional team
- Understanding of GR&R execution, capability analysis and first article
- Develop an understanding of Good Manufacturing Practice (GMP) and ISO requirements
- Education or Equivalent Experience: High School or equivalent
- Education or Equivalent Experience: Trade School
- Willing and able to work as a team member and make decisions within authorized responsibility
- Have a functional understanding of cGMPs
45
Inspection / Metrology Technician Resume Examples & Samples
- Experience with using PC–DMIS CMM metrology software
- Experience with reverse–engineering, touch–probes, and laser–scanning
- Experience with 2D and 3D CAD design software, including SolidWorks, and reading drawings, 3D modeling, and geometric dimensioning and tolerancing (GD&T)
- Experience with additive manufacturing, including 3D printing
46
Metrology Technician Resume Examples & Samples
- Inspect, test, or measure materials or products being produced
- Develop and maintain techniques to properly analyze, align and inspect complex hardware using Microscopes, Alicona optical scanner, OGP Smartscope, XRF Analyzers, LCR Meter and GOM ATOS
- Assist in Calibration management
- Document and organize inspection results
- Ability to read Mechanical drawings and prints
- Maintain Service request site and records
- Perform cross sections and measurements
47
Quality Metrology Technician Resume Examples & Samples
- Develops and uses measurement methods and equipment to determine the dimension features of products conform to the design features
- Program and use CMM, OGP, vision systems, and form tracking systems
- Develop measurement programs for use by quality inspectors and production personnel
- Perform inspection and testing of molded components and assemblies for conformance to design and configuration requirements
- Utilize inspection measurement tools (i.e. micrometers, calipers, drop indicators, thread gauges, plug gauges, comparators etc.)
- Troubleshooting OGP and CMM programs and system malfunctions
- Optimize inspection methods to expedite inspections and manage equipment capacity
- Train colleagues / technicians/inspectors on vision system (i.e. – OGP) and Coordinate Measurement Machine (CMM) operation for parts being ran on production floor
- Perform workmanship evaluations on plastic parts (flash, damage, discoloration, contamination, etc.) using microscopes
- Compile and analyze measurement data and statistics to assess measurement methods and process capability
- Perform Gage Repeatability and Reproducibility (GRR) studies to evaluate measurement methods
- Perform tests and records data on spreadsheets
- Identify and Report Non-conformances of product or processes
- Provide support for Corrective Action investigation
- Demonstrates technical skills. Requires basic competency related to function. Read and interpret technical drawings and specifications including ISO/ASME GD&T. Demonstrates basic functional and/or process knowledge and participates in process. Utilize Trigonometry, Geometry, Statistics (in relation to SPC) and basic math problem solving skills. Basic Knowledge of Quality Control practices. Has awareness of Flex technologies/ techniques. Requires the ability to utilize charts, tables and specifications, and operate a variety of measuring instruments. Basic understanding of typical quality tools, such as 8d, statistical process control, FEMA and control plans. Use of the following tools may be required: Office Skills: telephones, data entry, office software to include word processing, spreadsheet, and presentation package. Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals. Ability to compute rate, ratio and percent and to draw and interpret bar graphs. Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations
48
Metrology Technician Resume Examples & Samples
- Identifying and driving continuous improvement opportunities
- Making recommendations and advising about product feasibility
- Developing new test and repair processes
- Support and follow the quality system to prevent any defective pieces from leaving the facility and reaching the customer
- Thorough understanding of manufacturing drawings, Geometric Dimensioning and Tolerancing and specifications
- Familiar with the use of Microsoft Office applications
- Experience programming CMM equipment (Cameo software based on PC DMAS), experience with jigs and fixturing
- An engineering background, such as time-served mechanical or electrical technician
49
Metrology Technician Resume Examples & Samples
- Provides troubleshooting, preventive and demand maintenance work on a variety of equipment and systems including centrifuges, compressors, gear boxes, autoclaves, washers, blowers, mixers, reactors, pumps, heat exchangers, piping systems, etc. along with other equipment related to production operations. Additionally, performs preventive maintenance work on plant equipment including air handlers and utility system components
- May provide development work by performing light machining/fabrication work on machine lathes and milling machines, etc
- May perform pipefitting, welding, fabrication, building maintenance and/or other work on projects
- As a skilled specialist, completes tasks in resourceful and effective ways. Works on assignments requiring considerable judgment and initiative. Understands implications of work and makes recommendations for solutions. Determines methods and procedures on new assignments
- Often acts as a facilitator and team leader
- Maintains quality standards when populating or executing relevant documentation (i.e., WO's, JP's, SOPs, etc.). Ensures that documentation is maintained (e.g., attachments doc forwarded appropriately).Identifies inconsistencies and/or errors in relevant documentation. Works with supervisor to improve errors when discovered. Prepares necessary documentation for correction of errors. Responsible for timely correction
- Provides valuable input on new Job Plans and/or Data Sheets
- Wears appropriate PPE. Completes required EH & S training on time. Identifies and submits "Safety Opportunities" and "Near-Misses". Promotes a safety culture in the workplace by supporting safety related programs (e.g., actively participating in JSAs). Educates peers on existing hazards in the work area
- Leads safety-related teams (e.g., being an EH&S Activity Coordinator, leading JSAs, etc.). Ensures that peers submit “Safety Opportunities” and “Near-Misses” when observed
- Completes training on time. Trained as a certified trainer. Capable of training others on complex tasks. Actively seeks out continuous learning opportunities and trainings
- HS diploma with10+ yrs experience or Relevant Certificate with 5+ yrs experience or Associates technical degree with 3+ yrs experience or BS in Engineering, with 0+ yrs experience
50
Metrology Technician Resume Examples & Samples
- Calibrating a full range of physical, dimensional and electrical instruments and measuring devices with written instructions (such as department procedures, manufacturing specifications, industry and military specifications), to include laboratory standards
- Analyzing data generated in testing to correctly determine whether parameters meet specifications and uncertainties
- Two years of related experience
- PMEL/TMDE trained or equivalent highly preferred
- Ability to lift up to 35 Lbs
51
Metrology Technician Resume Examples & Samples
- Preventative maintenance, calibration and qualification services for a variety of instrumentation in support of laboratory personnel
- First response to customer requests for repair and maintenance of general laboratory equipment
- Perform assigned PMs and calibrations on laboratory equipment, and report changes or repairs needed. Instrument types include but are not limited to: HPLC's, GC’s, autosamplers, UV/Vis spectrophotometers, plate readers, and analyzers
- Ability to perform required administrative duties. For example: preparation of parts and assets for shipping, management of spare parts (replenish stock, organize, create inventory, etc.), asset inventory, maintenance of service records, equipment manuals specifications and technical reference materials
- Ability to work safely and report all potentially unsafe conditions. Participate and complete all required EHS, technical and professional training assigned
- U.S. Marine Corps TMDE or Air Force PMEL training or equivalent preferred
- Preferred 2-3 years working with analytical instrumentation in a regulated laboratory
- AA/AS degree in laboratory science or equivalent hands on experience
52
Metrology Technician Resume Examples & Samples
- Responsible to identify, troubleshoot and solve tooling problems and provide assistance to manufacturing and inspection personnel on the instrument’s performance
- Manage the calibration control records including the issuance of upcoming calibration, delinquent and out of tolerance reports
- Maintain calibration records (manually or by computerized system) identify trends and recommend actions as to change the calibration interval
- Verify and assure the calibration records from the suppliers are correct and accurately describe the instruments
- Develop and update the calibration procedures from manufacturer recommendation to reflect desired methodology in calibration processes or by gathering necessary information
- Assist in the selection of standards or instruments to be used as reference or use for production applications based upon need of the company
- Assure environmental conditions are maintained and recorded
- Support by active participation on the internal audit program
- Support any manufacturing or inspection need by providing direct inspection work as part of production schedule
- Assist in the repair of instruments with or without technical assistance from the manufacturer by being able to communicate, understand and apply technical instructions for the completion of the repair
- Program computerized equipment as required
53
Metrology Technician Resume Examples & Samples
- Required technical degree in industrial areas, desirable in mechanics
- Calibration and handling of measuring instruments
- Determination and Calculation of Measurement Uncertainty
- Applied Metrology
- MS Office / Excel – intermediate level
54
Metrology Technician Resume Examples & Samples
- Developing calibration methods and techniques based on principles of measurement science, technical analysis or measurement problems, and accuracy and precision requirements
- Implementing and maintaining a calibration program and maintaining records and standards. This includes identifying all gauging equipment, establishing calibration method, and establishing frequency of calibration
- Planning, performing, and documenting part layouts, capability studies and Gage Repeatability and Reproducibility Studies
- Coordinating calibration with outside calibration services, as required. Ensuring all gages requiring outside calibration are sent out in a timely manner so calibration does not exceed its defined frequency, and is coordinated with quality group to prevent any interruption on release of product
- Assisting in performing maintenance and repairs as necessary to bring out of specification/tolerance equipment back into proper working condition. Performing root cause analysis of technical discrepancies/abnormalities
- Coordinating the purchase of new and replacement gauges, test, and measurement equipment. Evaluating available products and make recommendations to your direct Supervisor and then to supervision (manufacturing engineering, design engineering, and quality engineering) of best choice for the application. Processing approved purchase orders through Corporate Purchasing and tracking gauges and costs when received
- Documenting and verifying that all non-calibrated impact tools are set within the parameters of the Skidmore-Wilhelm Test
- Conducting electronic and mechanical investigation and analysis of in-house and supplier related quality problems
- Providing technical assistance to other departments, including being the representative during third-party agency audits for calibration requirements
- Understanding and utilizing the SAP Quality Module for established applications. Recommending and implementing new applications based on SAP QM knowledge and benchmarking other divisions/companies
- Facilitating incoming inspections, Material Review Board, 1098 inventory levels, and warranty returns
- Creating and maintaining all records and preparing reports as required, associated with performance of duties
- Cleanup and general tidiness of all areas in which work is performed. Maintaining general housekeeping of working area and plant
- 2 year degree from a technical college is required. Bachelor's degree in electrical, electronics or mechanical engineering or other related degree is preferred
- Ability to read and interpret blueprints, schematics, technical manuals and procedures and use them to repair and maintain all types of instrumentation properly
- Knowledge of various quality system measuring devices to include video and contact CMMs, CMM software applications, hand held gauges, and color measuring equipment (i.e. Spectrophotometers, Spectroradiometers) is preferred
- Familiar with the application, use and locating registered specifications (ASTM, MIL, etc.), non-destructive and destructive testing, and functional verification a plus
- Metrology experience and/or certifications a plus
- Strong analytical skills and ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry
- Be able to employ troubleshooting techniques to solve problems and maintain and repair instrumentation
- Effective writing skills and proficiency in MS Word and MS Excel
55
Metrology Technician Resume Examples & Samples
- Working knowledge of cGMP guidelines, FDA 21 CFR Part 11, 210/211, ISO 14644 and 17025; NIST Metrology guidelines and other international regulatory requirements
- Ability to pass the NIST Math Pre-Test and subsequent Intro to Metrology Class
- High school or equivalent required, B.S. from a credited college in a technical field desired
56
Metrology Technician Resume Examples & Samples
- Uses knowledge and skills to perform calibration on various instrumentation and controls throughout a cGXP environment
- Works with various departments to schedule routine and non-routine calibration work
- Trains team on Althea’s instrumentation and calibration procedures
- Executes, writes and reviews metrology SOPs
- Functions as subject matter expert
- Troubleshoots and rectifies issues that are complex in nature
- Assists in research and implementation of new methods and technologies to enhance operations
- May provide day to day direction to team on specific projects
- Uses mathematics to solve process measurement related problems as well as to derive and interpret specifications for instrumentation/controls on various processes within the facility
- Conducts tests and inspections of products, services, or processes to evaluate quality, performance and reliability
- Determines the causes of out-of-spec measurement errors and presents solutions to resolve them
- Must gown qualify and exemplify cleanroom behavior
- Works with various off-site vendors to ensure calibration requirements are met on equipment to maintain reliability on processes site-wide
- May perform data entry and administrative work pertaining to metrology
