Technical Inspector Resume Samples

The Guide To Resume Tailoring

Guide the recruiter to the conclusion that you are the best candidate for the technical inspector job. It’s actually very simple. Tailor your resume by picking relevant responsibilities from the examples below and then add your accomplishments. This way, you can position yourself in the best way to get hired.

Craft your perfect resume by picking job responsibilities written by professional recruiters

Pick from the thousands of curated job responsibilities used by the leading companies

Tailor your resume & cover letter with wording that best fits for each job you apply

Resume Builder

Create a Resume in Minutes with Professional Resume Templates

CHOOSE THE BEST TEMPLATE - Choose from 15 Leading Templates. No need to think about design details.

USE PRE-WRITTEN BULLET POINTS - Select from thousands of pre-written bullet points.

SAVE YOUR DOCUMENTS IN PDF FILES - Instantly download in PDF format or share a custom link.

Create a Resume in Minutes

K Luettgen

Kaylie

Luettgen

464 Jan Walks

Phoenix

+1 (555) 128 9856

464 Jan Walks

Phoenix

Phone

p +1 (555) 128 9856

Experience Experience

Boston, MA

Technical Inspector

Boston, MA

Abshire LLC

Boston, MA

Technical Inspector

Assisting in warehouse stock takings and audits
Conduct field/sustainment level technical inspection on chemical equipment, quartermaster machinery, forced air-heaters, and special purpose equipment such as electrical/fuel heater systems, liquid pumps and pumping systems, tactical and lightweight reverse osmosis water purification systems, decontamination systems, protective filter systems, smoke generator systems, laundry systems and internal combustion engine ignition/fuel/cooling/electrical systems
Perform testing and certification of equipment and material during Load Testing Process
Support Extended Docking Work Period (EDWP) material and Quality Assurance (QA) personnel in resolving material issues
Perform PDQR process when receiving improper or damaged repair parts
Conduct field/sustainment level technical inspection on construction equipment which includes that used for earthmoving, grading, and compaction; lifting and loading; quarrying and rock crushing; asphalt and concrete mixing, and surfacing; water pumping; air compression and pneumatic tools; and powered bridging. Also conducts inspection of engines, power trains, fuel and electrical systems, hydraulic systems, earth-moving components and pneumatic equipment
Performs other duties as assigned

New York, NY

Construction Technical Inspector

New York, NY

Hintz, Hoppe and Keeling

New York, NY

Construction Technical Inspector

Performs change order estimating and assists the Project Manager in change order negotiations
Oversee that all work is performed in accordance with approved manuals and procedures
Assist in managing and reviewing the progress of contractors' construction schedules
Coordinates and monitors schedule updates, invoices and submittals
Review weekly and monthly reports on the status and progress of the contracts, including project costs and potential changes
Oversee that the project is constructed and documented in accordance with the contract documents and good engineering practices
Provide technical support to Project Managers and be responsible for developing and maintaining project cost/change controls, and project budget and accounting records

present

Detroit, MI

MWO Technical Inspector, SCA, Bragg, NC

Detroit, MI

Muller and Sons

present

Detroit, MI

MWO Technical Inspector, SCA, Bragg, NC

present

Provide necessary supervisor/managerial leadership to assigned team members to ensure project quality and productions goals are not compromised
Performs audits and inspections of work centers and ongoing maintenance actions, procedures, and equipment and facilities
Inspects and verifies proper completion, established standards, and documentation IAW U.S. Army and L-3 procedures
Creates Logbooks for GSE prescribe equipment, i.e. AGPU’s
Prepares / publishes workbooks for MWO, TB, RSN, SOW, and SRA applications
Performs preflight and post flight inspections in accordance with standard procedure on flight-proven aircraft
Monitors the material deficiency and technical order improvement programs (AMAM’S/ASAM's/ SOF's/DD Form 2028's)

Education Education

Bachelor’s Degree

University of Tennessee

Bachelor’s Degree

Skills Skills

Possess good communication skills; be adaptable, diversified and capable of troubleshooting entire aircraft system
Working knowledge of electrical, electronic, mechanical and associated systems principles to complete properly all probable work tasks
Basic proficiency in Word, Excel, and Outlook applications
Ability to read, write, speak, and understand Arabic is desirable
Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems
Maintain accountability of section equipment and personnel
Ability to Inspect Check and Test all types of HVAC System
Ability to provide technical support to structural/mechanical engineers and customers
Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule
Ability to obtain a CAC and a Logistics Information Warehouse (LIW) account

Create a Resume in Minutes

8 Technical Inspector resume templates

Read our complete resume writing guides

Technical Inspector, Benning, GA Resume Examples & Samples

Maintain aircraft assigned to Ft. Benning, Georgia during the following maintenance situations (I.E daily flight operations, daily unscheduled maintenance, Back shop support, Phase maintenance, and all SOF and AMAM message requirements)
Maintain all historical records IAW DA Pam 738-751 for aircraft assigned to Ft. Benning Georgia
Maintain AOAP logs for all oil samples taken from aircraft assigned IAW DA Pam 738-751
Maintain Technical Manuals libraries to ensure all changes are posted and it is current and up to date
Maintain the SOF and AMAM for aircraft assigned to ensure the requirements are logged and completed IAW the appropriate SOF or AMAM
Perform Weight and Balance requirements IAW the appropriate Maintenance Manuals and IAW DA Pam 738-751
Monitor all inspection requirements on the aircraft DA Form 2408-18 are being completed and updated properly
Inspect all maintenance IAW appropriate Maintenance Manuals (I.E. Technical Manual(TM) AVUM Level, DEPOT Level's, MEC's, Safety of Messages (SOF), AMAM messages)
Inspect the rigging, adjustment, and track & balance aircraft systems IAW appropriate maintenance manuals in a timely manner
Assist in diagnosing and troubleshoot deficiencies affecting aircraft flyable conditions IAW appropriate maintenance manuals in a timely manner
Inspect and maintain aircraft maintenance records IAW DA Pam 738-751 in the ULLS-A system. To include the following modules: aircraft logbook module, backshop module, phase module
Inspect that all maintenance is properly performed and documented IAW DA Pam 738-751, Quality Assurance requirements, TMs, MECs, SOF, AMAMs, and all applicable company policies and procedures
Perform inspections to ensure the research is completed with the appropriate maintenance manuals and the ordering of repair parts in ULLS-A supply module required for completing maintenance is IAW appropriate maintenance manuals
Ensure turned in parts to supply have proper documentation IAW DA Pam 738-751
Ensure mechanics are using general Aviation standards for tool usages during the performance of all maintenance procedures
Ensure common and special tools are in safe and servicable condition per general aviation standards
Train all mechanics in the following: procedures, policies, day to day operations, ULLS-A system aircraft logbook, backshop, phase modules
Work with Maintenance Manager to train mechanics to improve their abilities
Daily monitor all assigned aircraft and logbooks to ensure all maintenance issues are being addressed
Daily monitor logbook discrepancies to ensure remarks blocks have appropriate 72 hour delay requirements meet
Ensure 2410 components have proper paperwork IAW DA Pam 738-751 before being installed on aircraft and before being turned in to supply
Report all Personal Safety, Aircraft Safety, Environmental Health and Safety, and customer concerns to Management immediately

Wheel Technical Inspector Resume Examples & Samples

4 years of wheeled vehicle maintenance experience at the DS and GS levels required
Must be able to pass QC Inspector PQS test within 30 days of hire
Must be able to read vehicle schematics
Requires a collaborative work style that fosters cooperation and team work
Driver’s license required
Must have active NACI
1 year experience as a maintenance inspector preferred

Construction Site Technical Inspector Resume Examples & Samples

TIs should have at least 10 years experience in Construction Management or A/E Construction Administration with facility construction projects exceeding $10 million dollars
Strong Skill set with Drawing and Specifications Review, Interpretation and Application
10 years of construction project experience
Change Order documentations and estimating
Construction Schedule update review and comment
Monthly Construction Payment Application Review Process and Approval
Site Field Inspection capabilities
Ability to lead and coordinate with Owner and Consultants
RFI Management
Construction Submittal Management
Knowledgeable in Building Codes and standard construction Test Procedures
Strong in Microsoft Office Programs, Outlook, Word and Excel
Technical Memo Writing and experience with web based construction management programs
Formal Project Closeout experience

QC Technical Inspector Resume Examples & Samples

Inspect aircraft equipment condition for safety, and ensures compliance with technical directives
Review aircraft Historical records, log book entries, TMDE, AOAP Air wing Information System (AWIS) and W&B for accuracy and compliance
Advise maintenance personnel in the use of technical data to troubleshoot, repair, or replace malfunctioning systems
Verify proper procedures, tools and technical data are used while conducting maintenance
Conduct audits/surveillance of maintenance programs to ensure compliance with the Quality Control and Maintenance Plans
Acts as the Safety Management Representative (SMR)
Knowledge of The Army Maintenance Management System (TAMMS), Aviation unit level and Intermediate level maintenance processes and procedures
Extensive knowledge of component time before overhaul, records keeping, historical records, and associated equipment, and applicable technical orders
Effective interpersonal skills for complex system inspection relating to safety of flight and on the job maintenance activities
Must be able to interpret technical data, and determine best case path forward to correct deficiencies
Travel and supervision of large groups of maintenance personnel may be required on a periodic basis
Able to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation as a condition of continued employment
Must possess a current US Passport or the ability to obtain one before assignment
FAA Airframe and Power plant (A&P) Certificate required

Technical Inspector Resume Examples & Samples

Responsible for quality control technical inspection of aircraft components, parts, and systems (including avionics, electrical, instrument, armament systems and subsystems) of the UH-60 helicopters at both the AVUM and AVIM levels
Perform quality and safety inspections of on-site equipment and tools used in aircraft maintenance
Responsible for in-progress and final quality control technical inspections during maintenance, repair, modification, rework and overhaul of UH-60 aircraft, its components, and component parts
Perform special aircraft and component technical inspections and non-destructive testing as required
Provide back-up quality control inspection of the other series helicopters at the AVUM/AVIM levels if qualified and required
Provide technical guidance, instruction, and interpretation of written instructions and procedures to aircraft technicians to ensure high quality work. Provide On-the-Job-Training (OJT) for Saudi technicians and/or TCN personnel to include maintaining appropriate records on personnel such as Job Performance Guides (JPGs)
Must have demonstrated a knowledge of the UH-60 systems (to include fire control, HELITOW, 2.75" rockets and .50 caliber gun pod), with proven ability to perform AVUM and AVIM technical inspection functions as described
Must have demonstrated the ability to use all measuring, test, and diagnostic equipment for the UH-60 minus the mast-mounted sight), as well as be certified to perform non-destructive inspections
It is desired that the incumbent have knowledge of the UH-60 series helicopter systems, with the proven ability to perform AVUM and AVIM technical inspections of those systems
Must have demonstrated communication skills, both oral and written. Must be fluent in the English language
Must be capable of obtaining a valid light equipment operator’s license
A current Airframe and Power Plant (A&P) license is desired
Must be a graduate of the US Army Technical Inspector course, with a minimum of three (3) years of recent (within three (4) years of application date) aviation maintenance experience, of which two (2) years must be as an UH-60 Technical Inspector (15T)

Technical Inspector Resume Examples & Samples

Plans, conducts, and supervises aircraft technical inspections
Develops and implements quality control and ground safety programs to ensure compliance with contract specifications
Evaluates personnel, including verification of skills, training and experience
Performs audits and inspections of work centers and ongoing maintenance actions, procedures, equipment and facilities
Examines parts and components for conformance to design specification to determine serviceability; serviceable, unserviceable-reparable, unserviceable-nonreparable, affixing completed appropriate form/tag for disposition; return to stock, route to appropriate shop for repair and/or turn-in.Form/tag will contain comment relative to evaluation and be stamped by the Inspector
Monitors timeliness and applicability of maintenance technical data and technical library
Reviews maintenance source documents, inspection records, notes recurring discrepancies or trends and initiates appropriate action
Manages the material deficiency and technical order improvement program
Reviews engineering investigation requests
Initiates and reviews quality deficiency reports, technical deficiency reports and hazardous material reports, ensuring that they are accurate, clear, concise and comprehensive
Conducts safety inspections, training, and drills. Inspects and verifies proper completion and documentation of safety and flight discrepancies
Briefs and debriefs pilots and crew members assigned to functional check flights
Receives aircraft and explosive mishap reports and studies them for applicability
Oversees aircraft weight and balance program
Participates in maintenance test flights and operation checks as required
Ensures compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration
Provides lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies throughout all aircraft modifications and/or maintenance efforts
Prepares evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities
Make entries in aircraft logs and records
Perform other qualified duties as requested
Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements
Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records
Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components
Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required
Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required
Current FAA Inspection Authorization (IA) or a minimum of three years’ experience as an aviation inspector and a minimum of one year experience on the Mission Design Series (MDS) airframe they will be inspecting
Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components

MWO Technical Inspector, SCA, Bragg, NC Resume Examples & Samples

Supervise assigned team members to ensure workmanship meets published standards addressed in applicable technical guidance provided by the customer
Provide necessary oversight to assigned team members to ensure company and customer established policies and procedures are understood and adhered to during the accomplishment assigned work tasks
Prepare daily and or weekly status reports for review by upper level management for the project or projects assigned to supervise
Assists in putting together estimate/proposals for special projects, i.e. SRA Program
Reviews workbook package prior to submitting for signature by L3 and QAR’s
Maintains record files on all completed Maintenance Final packages for the entire CFT Site and Road Teams
Inputs and maintains transmittal log of completed final packages and ships the fill boxes to home office once a week
Prepares / publishes workbooks for MWO, TB, RSN, SOW, and SRA applications
Submits the DD Form 2026 for AOAP Program, as required
Maintains aircraft weight and balance records, utilizing AWBS
Must be familiar with aircraft Automated Log Book program "ULLS-A"
Maintains aircraft Logbook, Historical Record, and Weight and Balance record per aircraft
Submits the DA Form 2410
Creates Logbooks for GSE prescribe equipment, i.e. AGPU’s
Assigns Control Number and processes (submits) QDR’s On-Line
Assigns Control Number and processes Non-Conforming/Deviation Requests
Assigns Control Numbers and logs Control Exchange/Substitution Authorization Forms
Submits Reports of QDR’s and Controlled Exchange on a scheduled basis
Reviews received ECOD’s for accuracy prior to submitting for Maintenance Engineering Call (MEC)
Request/Submits by E-mail for the TPWD necessary funds approval to accomplish RESET and Non-RESET Depot repairs, aircraft airframes. Including request for on-site repair Teams
Prepare Travel Expense Reports (TERs) and Financial Expense Reports (FERs) while TDY for team members as required
Complete weekly man-hour reports for assigned team members as required to track progress/cost for projects assigned to team members
Possess the necessary supervisory and managerial skills to function as the immediate supervisor for assigned team during completion of projects at remote locations while TDY
Implements quality control programs to ensure compliance with contract specifications, for example Modification Work Orders (MWO), Technical Bulletins (TB’s), Retrofit Service Notice (RSN), Statement of Work (SOW), and/or Depot Level Repairs
Inspects and verifies proper completion, established standards, and documentation IAW U.S. Army and L-3 procedures
Performs audits and inspections of work centers and ongoing maintenance actions, procedures, and equipment and facilities
Reviews maintenance source documents (MWO's/TB’s/RSN’s/SOW's/Depot Maintenance Work Requirements DMWR), aircraft inspection records, notes recurring discrepancies or trends
Monitors the material deficiency and technical order improvement programs (AMAM’S/ASAM's/ SOF's/DD Form 2028's)
Reviews engineering investigation request
Initiates, reviews and submits quality deficiency reports, technical deficiency reports, and hazardous material reports, ensuring that they are accurate, clear, concise, and comprehensive
Prior Military Aviation maintenance experience is preferred (MWO installs)
Five (5) years' minimum experience as an Aircraft Mechanic/Lead
Three (3) years’ minimum experience as a Technical Inspector, of which one (1) year must be on the UH-60 airframe
Must be able to read and interpret complex engineering drawings, technical manuals, and use measuring instruments, gauges, tools, and test equipment
Must be knowledgeable of ANSI/ISO/ASQ Q9001-2000 quality management systems requirements
Completion of Military Technical Training or comparable Civilian Trade School is desired
An FCC License may be required for non-military aircraft
Must have and maintain a valid state driver’s license when required by job assignment
Must be able to obtain and maintain required clearance for Common Access Card (CAC)

Construction Technical Inspector Resume Examples & Samples

Oversee that all work is performed in accordance with approved manuals and procedures
Oversee that the project is constructed and documented in accordance with the contract documents and good engineering practices
Provide technical support to Project Managers and be responsible for developing and maintaining project cost/change controls, and project budget and accounting records
Performs change order estimating and assists the Project Manager in change order negotiations
Coordinates and monitors schedule updates, invoices and submittals
Assist in managing and reviewing the progress of contractors' construction schedules
Review weekly and monthly reports on the status and progress of the contracts, including project costs and potential changes
Report the status of projects to Jacobs' business / market leader
Attend client program meetings as needed
A safety leader through example, words, and compliance
Oversee construction quality assurance
Bachelors or Masters of Science in Civil, Structural, or Mechanical Engineering, Construction Management, Architecture, or other related discipline required. Exp may be substituted
5 years of project experience required
Professional Engineer registration preferred
Experience with large manufacturing facilities construction sites preferred
Experience in the capacity of Quantity Surveying preferred
Proficient with MS Office Suite of tools, exposure to schedule software, preferably Primavera (P6) preferred

Technical Inspector Resume Examples & Samples

Possess good communication skills; be adaptable, diversified and capable of troubleshooting entire aircraft system
Working knowledge of electrical, electronic, mechanical and associated systems principles to complete properly all probable work tasks
Knowledge of Quality Control, Production and Supply procedures required to perform job assignment
Able to determine when faulty systems or assemblies can be corrected through repair of replacement of new parts and the nature and extent of repair required
Must have skill in reading, applying and interpreting technical data
Five (5) or more years’ experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components
FCC or FAA A&P License required
Certification of education level is required
Previous aircraft inspector on the assigned aircraft experience preferred

Technical Inspector Resume Examples & Samples

Responsible for the inspection of repair and overhaul (R&O) and warehouse receipts including associated documentation
Assisting in warehouse stock takings and audits
Investigate and resolve non-conformance issues
Conduct on-site inspections as required
Support Extended Docking Work Period (EDWP) material and Quality Assurance (QA) personnel in resolving material issues
Applied Science Technologists and Technicians of BC (ASTTBC) certified or hold a valid trade certification an asset
ASQ Certified Quality Technical designation an asset
Minimum three years’ experience in a technical trade
Ability to understand technical drawings
Have knowledge in material management for major equipment and systems
Understanding of Controlled Technology and Transfer (CTAT) and International Traffic in Arms Regulations (ITAR) procedures
Eligible for a Canadian Secret Security Clearance, ITAR and Controlled Goods

Technical Inspector Resume Examples & Samples

High School diploma is required
5 years of construction site experience is required
3 or more years as a general foreman or Superintendent is required
Strong interpersonal and leadership skills are required
User skills inside the Microsoft Suite of tools is required
Bachelors of Science Degree in Construction Management or Engineering preferred

Technical Inspector Resume Examples & Samples

Perform battlefield damage assessment and repair (BDAR)
Classifies equipment for disposal IAW Army regulations and verify equipment condition codes
Perform testing and certification of equipment and material during Load Testing Process
Perform PDQR process when receiving improper or damaged repair parts
Perform load testing of various equipment IAW applicable technical reference
Maintains maintenance Library for all assigned equipment
A minimum of Five (5) years’ experience in Automotive Repair, Shop operations or equivalent combination of education and experience is required
A minimum of two (2) years’ experience as a Technical Inspector is required
Must possess the technical skills to identify different repair requirements as it pertains to Automotive Equipment
Must have expert knowledge of Technical and Commercial manuals for Servicing, Operational and Repair so that the correct procedures are used on the proper equipment
Must be an expert in Corrective Actions performed by the Maintenance Teams and only ensure that his equipment is FMC when cleared by the shops
Must be capable of giving and receiving instructions to all of the work force in the Shops
Ability to Inspect Check and Test all types of Automotive Equipment
Must have a working knowledge of the Army Corrosion Prevention Program
Must be knowledgeable of The Army Maintenance Management Systems (TAMMS)

Technical Inspector Resume Examples & Samples

Is highly mobile, stays in constant contact with POC's for all aspects of missions. Capable of implementing ISO and adhering to Vectrus standards
Suggests improvements to processes and capable of writing or rewriting/implementing those processes. Problem solving skills when multiple tasks need to be accomplished
Troubleshoot problem areas in TMP and coordinate resolutions with management
5 yrs experience in operating a Motor Pool which conducting inspections and efficient in troubleshooting procedures of assigned vehicel, Light Sets, NTV, MHE equipment and ground support equipment. Good customer Service Skill and Communication Skills. Proficient Computer skills, Microsoft programs. Must have Kuwait Drivers License. Must be proficient in using Technical manuals, parts manuals and schmetics

Technical Inspector Resume Examples & Samples

Performs visual and/or Non-Destructive Testing to determine welds are within quality standards
Reads blueprints, sketches and modification orders to plan the process and layout to be performed in an expeditious, economical and effective manner
Determines type and quantity of material, and orders material required to perform repair or fabrication IAW customer work request
Assists in coaching subordinate welders in ensuring all current Internal Operating Procedures (IOP) and quality regulations are complied with
Completes and reviews work order documentation to ensure for accuracy and completeness
Responsible for the Welding Testing/Qualification process and test plate inspections for assigned AN/FN Welding personnel and in ensuring that the current internal welding qualification program is maintained and up to date
Operate/maintain GFE: i.e. contact truck, portable welding equipment, air compressors, and forklifts
Responsible for observing all current ES&H and fire regulations. Ensures a safe work area by ensuring employees are utilizing appropriate welding screens, warning devices, and proper vehicle/equipment placement
Prepares necessary paperwork showing labor and supplies used for job order
Classifies equipment for disposal IAW Army regulations
Requires MOS or civilian trade qualification in US Army MOS 91E Allied Trade Specialist /91W Metal Worker or USMC, USAF, USN equivalent
Requires AWS CWI certification
A valid US Driver’s License and the ability to obtain a U.S. Government Motor Vehicle Operator’s License and Kuwait Driver’s License are required. Note: US driver’s license must be valid for at least 18-24 months after hiring date
Must be able to obtain a Kuwait Heavy Drivers License
A minimum of 8-10 years of experience in Fabrication Shop operations or equivalent combination of education and experience is required
A minimum of two (2) years experience in welding inspection is required
Must be able to pass & maintain AWS Welding Code Certifications as required
Strong interpersonal and negotiation skills
Collaborative work style fostering cooperation and teamwork
Ability to work effectively with employees and management of all levels to include multi-national staff, superiors, and ranking military officers
Ability to handle confidential company and employee information with complete discretion
High-level communication skills in English, both verbally and written
High-level organization and planning skills so workflow is managed efficiently and accurately
Ability to read, analyzes, and interprets reports and documents
Expert knowledge in welding and repair requirements for military equipment/ferrous and nonferrous metals using oxyacetylene, electric arc, and inert gas welding equipment
Expert knowledge of Field Level Maintenance Metal Worker tasks
Must have expert knowledge of functions and processes such as preparing an ECOD, ACOD, ECOR or PQDR
Ability to obtain a CAC and a Logistics Information Warehouse (LIW) account

Technical Inspector Resume Examples & Samples

Conduct field/sustainment level technical inspection on tactical power generation sets, power distribution systems, internal combustion engines and associated equipment such as power generation equipment, internal combustion engines and associated equipment up through 200KW (except for turbine engine driven generators)
Conduct field/sustainment level technical inspection on chemical equipment, quartermaster machinery, forced air-heaters, and special purpose equipment such as electrical/fuel heater systems, liquid pumps and pumping systems, tactical and lightweight reverse osmosis water purification systems, decontamination systems, protective filter systems, smoke generator systems, laundry systems and internal combustion engine ignition/fuel/cooling/electrical systems
Conduct field/sustainment level technical inspection on construction equipment which includes that used for earthmoving, grading, and compaction; lifting and loading; quarrying and rock crushing; asphalt and concrete mixing, and surfacing; water pumping; air compression and pneumatic tools; and powered bridging. Also conducts inspection of engines, power trains, fuel and electrical systems, hydraulic systems, earth-moving components and pneumatic equipment
Conduct field/sustainment level technical inspection on various Military and commercial-off-the-shelf (COTS) Material Handling Equipment (MHE) such as forklifts, Container Handlers and Cranes
Perform initial, in-progress, classification and final inspections
Operate and inspect equipment to diagnose and troubleshoot defects
Use technical manuals, bulletins and written directives in the performance of all inspections
Examine parts for damage or excessive wear using micrometers and gauges
Order required repair parts using appropriate military or COTS technical manuals
Classifies equipment for disposal IAW Army regulationsand verify equipment condition codes
Formal training (completion of MOS 91C, D, J or L course conducted under the auspices of the USA Ordnance School) is mandatory or meet verifiable civilian acquired skills criteria. Must provide DD Form 214 for verification of military experience
HVAC Technician Certification or have completed the Residential and Light Commercial Industry Competency Exams (ICE) and the EPA 608 (Type 1 and 2) & 609 certifications
Automotive Service Excellence (ASE) certifications in the automotive maintenance area preferred
A valid US Driver’s License and the ability to obtain a U.S. Government Motor Vehicle Operator’s License and Kuwait Driver’s License are required. Note: U.S. driver’s license must be valid for at least 18-24 months after hiring date
Must be able to obtain Kuwait Heavy Drivers License
Minimum of eight years continuous experience performing maintenance services and overhaul of Combat
Must possess the technical skills to identify different repair requirements as it pertains to Engineer Equipment
Must have the ability to troubleshoot, Service and Repair HVAC Systems work ordered by the customers
Ability to Inspect Check and Test all types of HVAC System

QC Technical Inspector, RW CH Resume Examples & Samples

Assist the Quality Manager in the monitoring and evaluation of maintenance personnel and maintenance actions performed
Oversee and train Host Nation personnel in the accomplishment of the duties as outlined in the approved quality control plan
Perform other qualified duties as assigned
Working knowledge of TAMMS, Quality Control, Quality Assurance, and generally accepted maintenance practices
Working knowledge of Quality Control, Quality Assurance and related programs and Department of State regulations
Exceptional knowledge of and application of AWIS data management systems
Must be fully knowledgeable of all requirements within the complex aviation maintenance repair, overhaul and functional use as they apply
Must be able to read, write and interpret technical data
Five (5) or more years’ experience in QC with expertise in one or more aircraft systems as a senior aircraft mechanic
CMF 15 Aviation MOS series or other military/commercial equivalent
Previous experience with Department of Defense, and Federal Aviation Administration maintenance management programs, historical records, and system of component tracking and air worthiness directive tracking preferred
Aircraft type is CH46

Technical Inspector Resume Examples & Samples

Radio, Knowledge of RF theory, practical application and various complimentary technologies
Telecommunication technologies (Ti, PRI, ATM, GSM, LTE, etc.)
Networking and network security (switches, routers, firewall, IDS/IPS, PSPs)

Technical Inspector Resume Examples & Samples

Test equipment to insure operating efficiency
Perform QDRs, ECODs, etc and verify condition codes
Must possess a high school diploma and equivalent
Formal training (completion of MOS 91F or G course conducted under the auspices of the U.S. Army Ordnance School) mandatory; or meet the civilian acquired skills criteria. DD214 required to verify Military Service/Training
Must possess the technical skills to identify different repair requirements as it pertains to Armament Equipment
Must have the ability to troubleshoot, service and repair Armament Systems
Must have full knowledge of TMDE and its proper usage Must be able to read, speak, and legibly write English
Must be able to obtain and hold the proper clearances and background checks
Must have expert knowledge of The Army Maintenance Management System
Must be knowledgeable of Laser and other HAZMAT (i.e. Tritium, Thorium) control/safety requirements

Technical Inspector Resume Examples & Samples

Responsible for the Welding Testing/Qualification process and test plate inspections for assigned (AN & FN) Welding personnel and in ensuring that the current internal welding qualification program is maintained and up to date
Requires MOS or civilian trade qualification in US Army MOS 44B Metal Worker or USMC, USAF, USN equivalent
A valid US Driver’s License and the ability to obtain a U.S. Government Motor Vehicle Operator’s License and Kuwait Driver’s License are required
A minimum of Five (5) years experience in Fabrication Shop operations or equivalent combination of education and experience is required
Must possess the technical skills to identify different classes of metals and the knowledge of the properties
Must have expert knowledge of manufacturing, cutting, working properties, proper jointing procedures and techniques of different metal classes
Must be an expert in reading and interpreting blueprints, shop or working sketches
Must have the aptitude to identify properties and recommend welding electrodes
Must be knowledge of body and frame materials and repair procedures for vehicles used
Must be proficient in read measuring tools and apply tolerances to measurements to determine if parts are within specifications
Must be proficient in reading and interpreting charts as applied to thread pitch tolerance, tap drill sizes and drill sizes
Must have knowledge of canvas and textile repairs and the different techniques
Must have knowledge of carpentry techniques
Must have knowledge of radiator repair techniques, tools and procedures
Must have knowledge of painting, preparation and stenciling methods

Maintenance Technical Inspector Resume Examples & Samples

Proficient in proper handling and disposal of hazardous materials and waste
Maintain accountability of section equipment and personnel
Enforce safety in day to day activities
Initiate, submit and follow up on work orders for deadline epuipment
Must have the ability to troubleshoot, service and repair automotive HVAC Systems
Must have full knowledge of TMDE and its proper usage
Must be proficient in how the repair parts system works and what to do when it doesn’t work correctly
Must be proficient in all phases of the paperwork that pertains to the Services, maintenance, repairs, classification and etc
Must have expert knowledge of the maintenance prints so as to be able to establish workload priority
Must have expert knowledge of Load Test procedures and processes
Must have expert knowledge of equipment operations as it is critical to working as a master driver for that shop
Must have expert knowledge in Military wheel and track vehicle maintenance
Must have expert knowledge of The Army Maintenance Management System, functions and processes such as preparing an ECOD, ACOD, ECOR or PQDR

Technical Inspector UH Resume Examples & Samples

Responsible for quality control technical inspection of aircraft components, parts, and systems (including avionics, electrical, instrument, armament systems and subsystems) of the 406CS/ OH-58D helicopter at both the AVUM and AVIM levels
Responsible for in-progress and final quality control technical inspections during maintenance, repair, modification, rework and overhaul of 406CS/OH-58D aircraft, its components, and component parts
Provide back-up quality control inspection of the UH-60 and AH-64 series helicopters at the AVUM/AVIM levels if qualified and required
Inspect and correct maintenance forms and records used in the performance of maintenance work to verify compliance with appropriate reference and other publications of The Army Maintenance Management System (TAMMS)
Maintain cleanliness and general maintenance of the associated work area. Perform cleaning, preservation, and operational maintenance work on assigned vehicles, tools, and equipment
Operate motor vehicles, machines, and other mechanical equipment in the performance of assigned duties
Must have demonstrated a knowledge of the 406CS (OH-58D) systems (to include fire control, HELITOW, 2.75" rockets and .50 caliber gun pod), with proven ability to perform AVUM and AVIM technical inspection functions as described
Must have demonstrated the ability to use all measuring, test, and diagnostic equipment for the 406CS/OH-58D minus the mast-mounted sight), as well as be certified to perform non-destructive inspections
Ability to read, write, speak, and understand Arabic is desirable
Must have a minimum of a high school diploma
Must be a graduate of the US Army Technical Inspector producing 67S30 or equivalent course, with a minimum of three (3) years of recent (within three (4) years of application date) aviation maintenance experience, of which two (2) years must be as an OH-58D technical inspector

QC Technical Inspector Resume Examples & Samples

Responsible for maintenance actions that involve flight safety
Responsible for FAA regulatory inspections and maintenance operation verifications
Responsible for interpreting all drawings, technical manuals, and directives
Ability to write with clear, concise, and technical accuracy
Observant alert, and hold an inquiring nature
Ability to work closely with others and assist maintenance personnel in interpretation and implementation of modification/maintenance instructions
Complete familiarity with inspection methods, techniques, and equipment used in area of responsibility
Must demonstrate a thorough knowledge of general inspection procedures, maintenance forms, records, reporting system and management thereof
Fluent in English, both speaking and writing
Mastery of Microsoft computer programs such as Word, Excel, Access, Outlook and AWBS 9.2
U.S. Citizen with ability to obtain a National Agency Check Investigation (NAC-I)
Must complete MDH factory school in accordance with established directives and policies
Must be able to write technical reports for official government and program managers
Must Possess a Federal Aviation Administration Airframe and Power Plant certificate
Advanced working knowledge of MD530F or equivalent type mission design series helicopters
Previous RII or Control Point Inspection Authority and experience
Experience and knowledge of aircraft maintenance records and logbooks
Experience on Original Equipment Manufacturer (OEM) technical directives
Military experience as a Technical Inspector preferred
ASNT level II license preferred
Federal Aviation Administration Inspection Authorization required